corporate brochure final 2012
TRANSCRIPT
-
7/27/2019 Corporate Brochure Final 2012
1/16
SETTING THE STANDARD
-
7/27/2019 Corporate Brochure Final 2012
2/16
CONTENTSPAGE 1 AREAS OF TESTING EXPERTISEPAGE 2-3 ELMATEARPAGE 4-5 MARTINDALEPAGE 6-7 TITAN
PAGE 8-9 TRUBURSTPAGE 10-11 TRUFADEPAGE 12 TEST MATERIALSPAGE 13 SERVICE AND CALIBRATION
TECHNICAL ASSISTANCE
We are committed to ormingclose relationships andhave established numerouspartnerships within thetextile industry, rom tradeand standards organisations,to test houses, customersand distribution partners.
With a heritage spanningalmost a century and ahal, we have evolved andgrown through a culture ocontinuous improvement,
resulting in a thoroughunderstanding o theapplications, operatingconditions and requirementso customers worldwide rom independent testinglaboratories and testhouses, to abric suppliers,manuacturers and retailers.
Using knowledge andexpertise, we consistentlyset the industry standardthrough product innovation
and technology, withcustomer and user needs,present and uture,driving our technologicaladvancements. You can beassured that with JamesHeal, you will always receivethe highest levels o productquality and customer
service. We have Agents andDistribution partners all overthe globe, ensuring locallyavailable product whenever,and wherever you need it.
Setting the Standard
AT JAMES HEAL, wE ARE DEDICATED TO DESIGNING AND DEVELOPING
HIGH PRECISION TESTING INSTRUMENTS AND TEST MATERIALS
FOR PHySICAL AND COLOUR FASTNESS TESTING. OUR wORLDwIDE
SERVICE AND CALIBRATION DIVISION AND EXPERT TECHNICAL
ASSISTANCE COMPLEMENT OUR PRODUCT RANGE, ADDING REAL
VALUE TO yOUR LABORATORy TESTING ACTIVITIES.
COMBINING EXPERTISE WITH INNOVATION TO CREATE
EXTRAORDINARY TESTING SOLUTIONS
-
7/27/2019 Corporate Brochure Final 2012
3/16
1
AREAS OF TESTING
EXPERTISETextile: Colour Fastness
- Chlorinated Water
- Dry Cleaning
- Dry Heat
- Hot Pressing
- Laundering
- Light
- Perspiration
- Phenolic Yellowing
- Print Durability
- Rubbing
- Washing
- Water
Textile: Physical
- Abrasion
- Bursting Strength
- Compression and Puncture
- Crease and Wrinkle Recovery
- Crimp
- Drape
- Durability- Flammability
- Mass per unit area
- Pilling
- Security o Attachments
- Seam Slippage
- Shrinkage
- Snagging
- Spray Rating
- Stretch and Recovery
- Surace Deterioration-Tear Strength
-Tensile Strength
- Washing and Drying
Non-Textile
- Bursting strength o nonwovens, plastics, paper andmedical products
- Microscratching o laminates, wooden, painted,automotive and high gloss suraces
- Physical and colour astness testing o leather
- Rubbing astness o laminates and wooden suraces
-Tear strength o paper and plastics
-
7/27/2019 Corporate Brochure Final 2012
4/16
ELMATEARDIGITAL TEAR TESTER
2
ELMATEAR2IS A POwERFUL AND VERSATILE INSTRUMENT,
wHICH HAS BEEN EXTENSIVELy RE-DESIGNED wITH
CONTEMPORARy STyLING AND A wIDE RANGE OF NEw
FEATURES wHICH OFFER REAL BENEFITS: VALUE, ACCURACy,
SAFETy AND FLEXIBILITy.
Elmatear
- Everything you need to start testing:Pendulum Weights (A-D), Check Weights and SpecimenPreparation Templates are included
- Increase capacity:with optional Pendulum Weight Kit (E)
- User riendly sotware:no calculations required, statistical analysis o results andoptional PC Sotware Package available
- Fool proo operation:automatic level compensation, automatic pendulum weightdetection, automatic zeroing and visible and audibleindicators
- Built-in saety:
no fnger traps, two handed release o pendulum andautomatic arrest o pendulum
- Quick and easy clamping:innovative rotary cam lock jaws and interchangeable jawaces with Pendulum Weight Kit (E)
Service andCalibration
TechnicalAssistance
Applications
- Worldwide Service
- ISO 17025 Calibration Service- 18 Months Warranty
- Applications Support
- Engineering Support
- Operator Training
- Knowledge Transer
-Textiles
- Nonwovens
- Paper
- Board
- Plastic
-
7/27/2019 Corporate Brochure Final 2012
5/16
3
Textile Paper
Nonwovens
STANDARDS
TECHNICAL
DATA
ASTM D 1424
DIN 53862
EN ISO 13937-1
ISO 4674-2
ISO 9290
M&S P29
NEXT 17
NF G07-149
ASTM D 1922
GB/T 11999
ISO 6383-2
JIS K 7128-2
NF T54 141
ASTM D 5734
WSP 100.1
APPITA P 400
ASTM D 689
BS 4468
CSA D9
DIN 53128
EN 21974
GB/T 455
ISO 1974
JIS P 8116
PAPTAC D9
SCAN P11
SNV 198482
TAPPI T414
UNI 6444
Standard Pendulum Weights (A-D) 8N, 16N, 32N, 64N
Optional Pendulum Weight (E) 128N
Units o Measurement N, cN, mN, kg, g, lb, oz
Number o Specimens (Plies) 1 to 16
Maximum Specimen Thickness 5mm
Cut Length 15 - 20mm
Blade Titanium nitride coated
Calibration Check Check Weights or each Pendulum
Weight 57kg
Dimensions 400 x 500 x 550mm
Power Supply 85 - 264VAC 50/60Hz 60W
Warranty 18 Months
Plastics
-
7/27/2019 Corporate Brochure Final 2012
6/16
4
MARTINDALEABRASION AND PILLING TESTER
OUR INNOVATIVE PRODUCT DESIGN TEAM HAS SET A NEw
STANDARD wITH THE NEXT GENERATION MARTINDALE 900 SERIES.
FLEXIBLE, THE SERIES INCLUDES THREE MODELS, FULLy
POPULATED wITH NINE, FIVE OR TwO STATIONS. EACH COMBINE
THE BEST IN STyLE, qUALITy, AFFORDABILITy AND FUNCTIONALITy INTRODUCING USERS TO THE NEXT LEVEL IN ABRASION AND
PILLING TESTING.
Martindale- James Heals unique product signature
- Exquisite attention to user needs
- Constructed rom light weight, hard wearing materials
- Unobstructed access to all test stations
- Versatile and intuitive control panel
- Optional voice prompts
-Tool-ree change between motions
- Comprehensive range o sample holding options
- Complies with all known standards or testing onMartindale
Service andCalibration
TechnicalAssistance
TestMaterials
- Worldwide Service- UKAS (ISO 17025 based) AccreditedCalibration Service
- 18 Months Warranty
- Applications Support
- Engineering Support
- Operator Training
- Knowledge Transer
- ISO 12947-1 Abrasive Cloth (SM25)
- M&S Nonwoven Felt
- ISO 12947-1 Woven Felt
- ISO 12947-1 Polyurethane Foam
- Range o Abradants or specialisedtests
-
7/27/2019 Corporate Brochure Final 2012
7/16
5
Scope
No. o specimens
Exposed area o test specimen
Working pressure on testspecimen
Rotational speed
Total stroke o drive units
Parallelism o top plate toabrading tables
Parallelism o sample holdersto abrading tables
Abrasion
Woven, knitted &
certain nonwoven
abrics
2, 5 or 9
6.45cm2
9 kPa (apparel)
12 kPa (upholstery)
47.5 2.5rpm
60.5 0.5mm
Pilling
Woven & knitted
abrics (staple spun
yarns)
2, 5 or 9
64.5cm2
2.5 cN/cm2 (knitteds)
6.5 cN/cm2 (wovens)
47.5 2.5rpm
24.0 0.5mm
Sock Abrasion
All fbre
compositions
& all end uses
2, 5 or 9
3.14cm2
23.86 kPa
47.5 2.5rpm
60.5 0.5mm
< 0.05mm < 0.05mm < 0.05mm
< 0.05mm < 0.05mm < 0.05mm
STANDARDS
TECHNICAL
DATA
Fabric Abrasion Fabric Pilling Sock Abrasion
EN ISO 12947
EN ISO 12945 - 2
ASTM D4966 (Abrasion)
ASTM D4970 (Pilling)
JIS L 1096
EN 13770
ISO 17704
EN 13520
EN 14605
EN 14325
EN 943
EN 388
ISO 5470 - 2
SN 198529 and SN 198525
IS 12673
M&S P17, P18 and P19
Next 18 and 26
and many others
Leather Abrasion(Ball Plate)
Edge Abrasion(Line Contact)
Scratch Resistance
APPLICATIONS
AND TOOLING
-
7/27/2019 Corporate Brochure Final 2012
8/16
6
TITANUNIVERSAL STRENGTH TESTER
TITAN4 IS AN OUTSTANDING, FOURTH GENERATION
UNIVERSAL STRENGTH TESTER, DESIGNED SPECIFICALLy
FOR TESTING TEXTILES, NONwOVENS AND LEATHER IN
VARIOUS FORMS: yARNS, FABRICS, GARMENTS AND SECURITy
OF ATTACHMENTS.
INNOVATIVE ENGINEERING AND INTUITIVE UNDERSTANDING
OF yOUR NEEDS ARE COMBINED TO PRODUCE AN
AESTHETICALLy PLEASING AND ERGONOMIC INSTRUMENT,
wITH INTELLIGENT, EASy-TO-USE TESTwISE TEST ANALySIS
SOFTwARE, AN EXTENSIVE RANGE OF SPECIMEN GRIPS AND
A COMPREHENSIVE LIBRARy OF INTERNATIONAL STANDARDS
AND RETAILERS OwN TEST METHODS.
Titan4
- Compact, desk top, standards-compliant Universal StrengthTester
- Operates as standard in both tension and compression
- Extensive range o tool-ree, interchangeable specimen grips
- Choice o three load cells - up to 3000N (approx 300kg):load cells supplied in cartridge orm to improve protectionand to acilitate sae handling and storage
TestWise Test Analysis Sotware
- Microsot Windows look and feeland amiliar industryspecifc terminology
- Single Sotware Package or yarn, leather, abric andnonwovens: tensile strength, seam slippage, security oattachments, button strength, pile loop extraction, tearstrength, peel bond (delamination), stretch and recovery(cyclic), ball burst, puncture and crushing
- Extensive library o pre-loaded, national and internationalstandards and o retailers test methods
- Standards Editor making it easy to modiy existing
standards or create new methods- Automatic setting o test parameters (including gaugelength) ater selection o required standard or method
- Three Clicks to start testing!
Service andCalibration
Technical
Assistance
- Worldwide Service
- UKAS (ISO 17025 based) AccreditedCalibration Service (tension and/orcompression)
- 18 Months Warranty
- Operator Training
- Knowledge transer
-TestWise Sotware On-LineMaintenance and User Support
- Engineering Support
-
7/27/2019 Corporate Brochure Final 2012
9/16
7
Fabric Strength
16 CFR 1500.53 Para ()
AATCC-ASTM TS-010
AATCC-ASTM TS-015
ASTM D5034
ASTM D5034
BS 3424 Part 33 Method 36
BS 3424 Part 4 Method 6
DIN 53858
EN ISO 13934-1
EN ISO 13934-2
EN ISO 1421 Method 1
EN ISO 1421 Method 2
ISO 5081
ISO 5082
ISO 9073-3
M&S P11
NEXT TM 27
NF G 35-107 Method B
RSG 1
Seam Strength and
Seam Slippage
ASTM D1683
ASTM D4034
ASTM D434
BS 3320
DIN 53868
EN ISO 13935-1
EN ISO 13935-2
EN ISO 13936-1
EN ISO 13936-2
EN ISO 13936-3
IWS TM 117
M&S P12
M&S P12A
M&S P12B
NEXT TM 16
NEXT TM 16a
RSG 2
RSG 3
Stretch and
Recovery / Cyclic
adidas 4-27
ASTM D4964
ASTM D6614
BHS 15J
BS 4952
Calida Bodywear Test No. 21
Decathlon DS-275
DUPONT TTM 076
EN 14704-1
EN 14704-3 - Method A
Limited Brands LTD03
M&S P14
M&S P14A
M&S P14B
M&S P15 Part 1
M&S P15A
M&S P15B
NEXT TM 21
NEXT TM 21a
RSG 5
RSG 4
RSG 6
SIS 65 00 68
Tear Strength
AS 2001-2.10
ASTM D2261
ASTM D5587
ASTM D5735
BS 3424 Part 5 Method 7A
BS 3424 Part 5 Method 7B
BS 3424 Part 5 Method 7C
BS 4303
DIN 53859 Part 2
DIN 53859 Part 5
DUPONT TTM 035
EN ISO 4674-1 Method A
EN ISO 4674-1 Method B
EN ISO 9073-4
EN ISO 13937-2
EN ISO 13937-3
EN ISO 13937-4
M&S P35
M&S P98
SIS 25 12 31
NEXT TM 25
SELECTION OF
STANDARDS
TECHNICAL
DATA
Measuring Principle Constant Rate o Extension (CRE)
Capacity (Tension & Compression) 3000N, 3kN, 300kg and 670lb
Load Cells3000N, 600N and 120N
Quick-change cartridge, auto-recognition S beam cells
Test / Return / Jog Speed 1 - 2000mm/min
Accuracy o Load Cells Class 0.5 (0.5%) rom 2 - 100% o load cell capacity
Speed Accuracy 0.005%
Maximum Stroke 660mm
Total Vertical Space 885mm
Positional Accuracy 0.00125mm
Calibration
Saety
Load cells: ISO 7500-1 (UKAS accredited) and ASTM E4Instrument: ISO 7500-1 and ASTM D76
CE marked (complies with Machinery, Low Voltage and
EMC Directives)
-
7/27/2019 Corporate Brochure Final 2012
10/16
8
TRUBURSTBURSTING STRENGTH ANDFATIGUE TESTER
TRUBURST3 IS A FULLy PNEUMATIC BURSTING AND
3D FATIGUE TESTER, wHICH COMFORTABLy EXCEEDS
THE EXACTING REqUIREMENTS OF ISO 13938-2,
ASTM D3786 AND OF MANy OTHER NATIONAL AND
INTERNATIONAL STANDARDS.
THE INHERENT FLEXIBILITy OF TRUBURST3 GIVES
IT THE CAPABILITy TO TEST A BROAD RANGE OF
MATERIALS INCLUDING TEXTILES, NONwOVENS,
PAPER, BOARD, PLASTICS AND MEDICAL PRODUCTS.
TruBurst
- Pneumatic: clean, efcient and sae
- Non-contact laser distension measurement: accurate results
- Automatic diaphragm correction: improves precision
- Adjustable clamping pressure: avoids slippage or specimendamage
- Automatic burst detect system: sensitive and reliable
- Illuminated viewing area: easily view tests in progress
- Automatic recognition o test dome: tool ree change overaccelerates testing and reduces downtime
- Intuitive sotware: or experienced and inexperienced users-Test method confguration: save up to 50 o your own
- Cyclic sotware: cycle up to 500 times to a pressure ordistension
-Dual ControlModel: approved by Marks & Spencerand adidas
Applications
Service andCalibration
TechnicalAssistance
- Worldwide Service
- UKAS (ISO 17025 based) AccreditedCalibration Service
- 18 Months Warranty
- Applications Support
- Engineering Support
- Operator Training
- Knowledge Transer
Textiles
Nonwovens
Paper
Plastics
Medical
- Knitted and woven apparel
-Technical textiles
- Wet wipes
- Surgical gowns and masks
- Staple, spun laid and air-laid
- Kitchen paper
-Toilet paper
- Diverse paper products
- Food packaging
- Bin liners
- Sacks
- Various plastic products
- Organ patches
- Hernia patches
- Wound dressings
- Artifcial arteries
- Animal skin
- Artifcial skin
- Blister packs
- Mosquito nets
-
7/27/2019 Corporate Brochure Final 2012
11/16
9
SPECIMEN
SIZE
Area
7.3cm2
7.8cm2
10cm2
50cm2
100cm2
Diameter
30.5mm
31.5mm
35.7mm
79.8mm
112.8mm
Maximum Distension
30mm
30mm
30mm
70mm
70mm
ISO 13938-2
ASTM D3786
Woolmark TM29
Edana 80.3
WSP 30.2
NEXT Test Method 22
M&S P27
adidas 4.09
ISO 2758 (paper)
TECHNICAL
DATA
Upper Pressure Limit
Resolution
kPa
100
0.02
psi
14.5
0.004
kg/cm2
1.019
0.0002
bar
1
0.0002
kN/m2
100
0.02
Pressure Range - TruBurst3 Model 801
Resolution
Upper Pressure Limit
Resolution
kPa
1000
0.2
psi
145
0.04
kg/cm2
10.20
0.002
bar
10
0.002
kN/m2
1000
0.2
Pressure Range - TruBurst3 Model 810 and Model 810/DC (Dual Control)
Resolution
Minimum
Resolution
Resolution
mm
0.1
70.0
0.1
cm
0.01
7.00
0.01
inches
0.001
2.756
0.001
Distension Range
Maximum
Resolution
STANDARDS
-
7/27/2019 Corporate Brochure Final 2012
12/16
10
TRUFADELIGHT FASTNESS TESTER
TRUFADE TRULy REVOLUTIONISES LABORATORy
LIGHT FASTNESS TESTING. JAMES HEAL HAS
COMBINED yEARS OF ACCUMULATED ENGINEERING
AND APPLICATIONS EXPERTISE TO CREATE A LIGHT
FASTNESS TESTER wHICH STREAMLINES AND
SIMPLIFIES A DIFFICULT AREA OF COLOURFASTNESS TESTING.
EVERy FUNCTION OF TRUFADE HAS BEEN CAREFULLy
DESIGNED wITH THE USER IN MIND. TRUFADE IS
wHOLLy STANDARDS COMPLIANT AND DELIVERS
ACCURATE AND RELIABLE RESULTS EVERy TIME!
TruFade
- High perormance, air-cooled xenon lamp
- Interchangeable flter systems or switching between ISOand AATCC standards
- Blue Wool and Controlled Irradiance operating modes
- SolarSens Radiometer incorporating Black StandardThermometer (BST)
- Up to 27 sample holder aces giving a total exposure area o1640cm2
- Exceptionally low running costs
- Complies with international standards or testing textilesand leather
- Compact, highly ergonomic and stylish design
Test Chamber
- Wide opening and at arms level oering comortable access
- Bright LED internal chamber lighting (illuminates when dooris open)
- Spacious design acilitating easy loading/unloading ospecimen holders
- Close control o chamber temperature and humidity
-Turntable or up to 9 triangularSpecimen Holders or or
8 Specimen Holders and SolarSens (used in ControlledIrradiance mode)
- Interchangeable optical flter systems: replaceable inra-redflters (ISO) and non-ageing flters (AATCC)
Service andCalibration
TechnicalAssistance
TestMaterials
- Worldwide Service
- ISO 17025 Calibration Service
- 18 Months Warranty
- Applications Support
- Engineering Support
- Operator Training
- Knowledge Transer
- ISO Blue Wool Standards (in piecesor pre-mounted strips on cards)
- AATCC Blue Wool Standards (Lseries)
- ISO Humidity Test Control Fabric(Red Azoic)
- OBA-ree Specimen Mounting Card
- ISO Grey Scale or assessingChange in Colour
- AATCC Gray Scale or Change inColor
-
7/27/2019 Corporate Brochure Final 2012
13/16
STANDARDS
TECHNICAL
DATA
Standards (pre-programmed)
Lamp
ISO 105-B02 & AATCC 16
2200W air-cooled xenon
Total Exposure Area
Test Positions
Exposure Area o each Test Position
Irradiance Monitoring System
Irradiance (300-400nm) Range
Test Chamber Humidity Range
Test Chamber Temperature Range
Black Standard Temperature Range
Water Reservoir Capacity
Water Consumption (ISO 105-B02 Normal)
Colour Touch Screen
Chamber Viewing Window
Ethernet Connection
1640cm2
27 maximum
60.75cm2 (135 x 45mm)
SolarSens (Radiometer)
40 - 50 W/m2
Ambient - 95%RH
Ambient - 95C
40 - 65C
27 litres
0.5 - 1.5 l/h
Supplied as standard
Supplied as standard
Supplied as standard
ISO 105-B02 IUF 402
AATCC 16 SLF 402
INSTALLATION
DATA
Dimensions (approx.)
Weight (approx.)
Electrical Supply
Water
Recommended Ambient Temperature Range
Recommended Ambient Humidity Range
720 (width) x 680 (depth) x 1200 (height) mm
240kg
Single phase 230V 15% (3kW) 50/60Hz
Pure (ISO 3696 Grade 3)
16 - 24C
30 - 65%RH (non-condensing)
11
-
7/27/2019 Corporate Brochure Final 2012
14/16
TEST MATERIALS
wE SUPPLy ALL THE TEST ANDREFERENCE MATERIALS REqUIREDFOR PHySICAL AND COLOURFASTNESS TESTING
MAJOR PRODUCT LINES:
- BLUE wOOL STANDARDS (COLOUR FASTNESS TO LIGHT)
- COTTON LAwN (CROCKING CLOTH)- DETERGENTS
- GREy SCALES
- MAKEwEIGHTS (LOADING FABRICS OR BALLAST)
- MARKING PENS (PERMANENT AND TEMPORARy MARKING)
- MARTINDALE TEST MATERIALS
- MULTIFIBRE Dw
- NICKEL SCREENING KIT
- yELLOwING TEST KIT
James Heal manuacture andsupply Test and ReerenceMaterials ounrivalledquality, which are totallycompliantwith the relevantstandards and specifcations.
We have been manuacturingTesting Instruments ormore than 100 years andutilise the same accumulatedtechnical expertise anduncompromising attention todetail in the development andproduction o Test Materials.
Furthermore, we possess aunique understanding o thecritical relationship betweenInstruments and Test Materials
and strive constantly toimprove that interace.
Test and Reerence Materialsare manuactured in apurpose-built Test MaterialsCentre, containing state-o-
the-art acilities or warping,weaving, inspection, cuttingand sewing, as well as orphysical, colour astness andchemical testing.
Two modern laboratories,working within a stringentand no compromisequalitysystem, check systematicallyevery batch o product.Quality and consistencyare also assured by the
use o independent UKAS-accredited Test Houses andby carrying out careullyselected perormance tests.
We have a zero toleranceto non-conormance and
product is not releasedunless it is ully compliant.
Certifcates to demonstrateconormity o our Testand Reerence Materialsare available and withoutadditional cost.
Our range contains all thetest and reerence materialsrequired or physical andcolour astness testing.
12
-
7/27/2019 Corporate Brochure Final 2012
15/16
SERVICE AND CALIBRATION
INSTALLATION SERVICEWe would like you to obtain ull beneft and an excellentreturn on your purchase o a James Heal instrument, so we
oer an optional installation service. Our team will unpack,position and connect your new equipment to the relevantservices.
COMMISSIONING SERVICEI you eel that your personnel need training to get the bestout o your new equipment, our installation engineers areable to provide basic training. More advanced training isavailable through our Technical Assistance Service.
BREAKDOwN SERVICEExperienced and skilled instrument technicians are available,at very short notice, to visit your Company, in any part o theworld, to deal with emergency breakdowns and to restorerapidly your equipment to ull operating condition.
CONTRACTUAL MAINTENANCEWe recommend regular, planned maintenance or yourinstruments, to preserve their value and to maintain their
accuracy and reliability. Attractive rates and priority treatmentare accorded to contract clients.
CALIBRATION SERVICESOur calibration services are based on ISO 17025. Many oour calibration procedures are accredited by UKAS (UnitedKingdom Accreditation Service). UKAS Certifcates o Calibrationare recognised and accepted worldwide by accreditors andcustomers and are your guarantee o our competence and othe continuing accuracy o your instrumentation.
TECHNICAL ASSISTANCE
APPLICATIONS SUPPORTExperienced textile technologists identiy the rightinstruments and the correct test materials or your applicationand provide on-going advice and support.
ENGINEERING SUPPORTSkilled technicians provide quick and eective help wheninstruments break down and get you back up and runningwith the least possible delay.
LABORATORyThe acilities and sta in our ully equipped, controlledenvironment laboratory assist you to confrm instrumentselection and to resolve any correlation issues between youand your customer or supplier.
KNOwLEDGE CENTREJames Heal specialises in all aspects o abric and colourastness testing and qualifed, knowledgeable people areavailable to help and to guide you through the complex worldo standards, retailers requirements and other issues.
TRAININGWe oer training at James Heal or in your actory helping youto maximise the return on your investment.
13
-
7/27/2019 Corporate Brochure Final 2012
16/16
S tti th St d d
TESTING INSTRUMENTSHigh precision textile testing instrumentation
TEST MATERIALSGuaranteed ft-or-purpose test materials or textile
testing procedures
SERVICE AND CALIBRATIONWorldwide installation, maintenance and calibration service
TECHNICAL ASSISTANCEExpert engineering and applications support
James Heal has Agents and
Distribution Partners in over60 countries. Please visit ourwebsite www.james-heal.co.uk
or more inormation and
contact details or your localJames Heal Agent.
James HealRichmond worksHalifax HX3 6EPEngland
Tel +44 (0) 1422 366355Fax +44 (0) 1422 352440Email [email protected] .james-heal.co.uk
A world wide presence
AGENT