Cover PageThe cover page ToC will open

the needed forms for your releases.

Red fields are mandatory and also auto fill other areas through out the forms.

Design Release’s

Design releases are for full jobs not for S/W/R jobs. Please use

the appropriate form.

The final Release Package is a checklist meant to verify that

you have provided all the information needed to

complete the job.

What departments need to be notified?

Blanket Documentation

needed

Blanket Test needed

Load rating has been changed

so you now have to pick from the drop down, this

should help reduce the number of

errors when a GM job is

released with the wrong

capacity and weight.

Individual test & Documentation

Quality Release

This section on a rework or warranty doesn’t always have to be filled out even if it is ford, the other section can be used to call out the specific

test or cert needed to be done.

Test needed

Test documentation not always needed

on R/S/W

Quality Release

Service class:0 = 0-20,000

1 = 20,001-100,0002 = 100,001-500,000

3 = 500,001-2,000,0004 over 2,000,000

Design Category two choices:

A = slow or low-cycle operations

B = high cycle counts

Tag information goes here this is what the customer see’s at the plant wrong or missing information here makes us look bad.

Quality Release

Design Category two choices:

A = slow or low-cycle operations A

can only = 0B = high cycle

counts. B can now only have values

of 1-4

Color is now the default field with

a mandatory entry unless N/A

is selected.

All details or parts needed to complete the task needs to be here, from detail #’s

to taps and bolts.

The description is needed to let the

builder know what is expected.

Re-work, Spare parts

or Warranty

Job’s should

have the prefix of

S/R/W on the cover

page so all documents

will have the same

tool number showing

Spare Part/Re-Work/ Warranty Release

Here we explain why we are doing this, was it a customer

change or our fault, this helps us to track

the why’s.

SIMO

Simo builds must have this

form to accompany the release with the

basic information

filled out.

SIMO builds need at least a hand sketch and a sequence of operation.

Forget Something?This is the error msg. you always ignore that’s letting you

know you should not proceed with saving or printing.

Hit list• Pdf’s being over written, need to

save as. Information is being lost or incorrect. i.e.: wrong ship dates, balancer missing from release…

• Station layouts needed even if it’s a hand sketch.

• Have P.O. request in same format as strippits/waterjet.

• Round weights up.