cpc - conveyor pulley and...

RETURN IDLER

TROUGHING IDLERSELF-ALIGNINGAlso available self-aligning return idler

TROUGHED IMPACT IDLER

EQUAL TROUGHING IDLER RUBBER DISC RETURN IDLER

CEMAB4, B5, C5, C6, D6 & E7

CLASS IDLERS

CONVEYOR PULLEY & COMPONENTS INC.CPC

VAN GORP®

Van Gorp Idler Advantages

1. 25-30% in potential energy savings (versus competitive designs) as a result of reduced friction. CEMA B and CEMA C are 3.5 to 4.5 N compared to approximately 6 N.

2. Ball bearings are sealed for life.

3. Features a double, triple labyrinth seal. Filled with lithium based grease. Prevents penetration of water and contamination into the bearings. Competition leaves seal dry, exposing the bearing to contamination.

4. Concave seal design utilizes centrifugal force to expel any contamination that is able to get past the outer dust cover.

5. Internal snap ring to secure the bearing, and an additional external snap ring secures the seal.

6. C1018 Shaft material.

7. ERW1020 Tube material for CEMA B, C, D and E idlers. CEMA F uses DOM Tubing.

8. Water resistant sealing system.

9. Flame resistant seal material (up to 302F or 150C).

10. Capable of operating at temperatures down to -22F or -30C with standard lubrication. Lower temperatures attainable with optional lubrication.

11. Standard idlers rated for above or below ground use.

12. Warrantied for 36 months from ship date.

209.579.9608 • www.westcoastpulleys.com2

3209.579.9608 • www.westcoastpulleys.com

Energy savings from 25% less roll-drag.

BEARING & SEAL ARRANGEMENT

Inner double triple labyrinth seal pressed onto shaft and into bearing cup

Maintenance-free, high-quality, low-drag, deep groove ball bearings

CALL 1-800-VAN-GORP (826-4677) for all of your Idler needs! Or email [email protected]


4 209.579.9608 • www.westcoastpulleys.com

RETURN IDLER Carries empty belt on the return run.

EQUAL TROUGHING IDLERTroughed belt idlers are available in roll inclinations of 20, 35 and 45 degrees.

TROUGHED IMPACT IDLERTroughed belt rubber cushion idlers protect the belt by absorbing impacts at loading and transfer points. They are available in inclinations of 20, 35 and 45 degrees.

FLAT CARRIERUsed for picking and sorting conveyors.

Also available in heavy duty live shaft design.

Van Gorp Idlers conform to CEMA standards fordimensions and meet or exceed CEMA load ratings.

SELF-ALIGNINGTROUGHING IDLERAlso available.

High quality maintenance-free

ball bearings

Heavy duty foot brackets made for

one or two bolt mounting

Narrow roll gaps

Deep formed channel end brackets for

extra strength

Self cleaningcross member

Non-Clogging center stands

Quick change rolls

Roller end welds protectedfrom belt wear

0.44” (18”-36”)

(42”-48”)

B4 EQUAL TROUGHING IDLERS

Assembly Description E H K Assembly Weight A C Bmin D L

B4-20TE-18 9.44 20.88 7.0 31.7 27 29.0 5.5 8.0 6.75B4-35TE-18 11.03 18.78 7.0 32.8B4-20TE-20 9.74 23.38 7.0 33.1 29 31.0 5.5 8.0 7.63B4-35TE-20 11.53 21.07 7.0 34.9B4-20TE-24 10.20 27.21 7.0 36.4 33 35.0 5.5 8.0 8.94B4-35TE-24 12.29 24.58 7.0 38.4B4-20TE-30 10.92 33.33 7.0 41.5 39 41.0 5.5 8.0 11.06B4-35TE-30 13.51 30.19 7.0 43.8B4-20TE-36 11.61 39.10 7.0 46.5 45 47.0 5.5 / 7.0 9.5 13.06B4-35TE-36 14.66 35.48 7.0 49.1B4-20TE-42 12.79 44.80 7.5 57.0 51 53.5 5.5 / 7.0 9.5 15.06B4-35TE-42 16.30 40.70 7.5 60.0

B4 IMPACT TROUGHING IDLERS


B4-20TEI-18 9.23 19.71 7.0 35.9 27 29.0 5.5 8.0 6.750B4-35TEI-18 10.68 17.76 7.0 37.5B4-20TEI-20 9.58 22.5 7.0 38.8 29 31.0 5.5 8.0 7.625B4-35TEI-20 11.26 20.31 7.0 40.6B4-20TEI-24 10.01 26.21 7.0 42.9 33 35.0 5.5 8.0 8.938B4-35TEI-24 11.99 23.71 7.0 44.9B4-20TEI-30 10.78 32.55 7.0 49.9 39 41.0 5.5 8.0 11.063B4-35TEI-30 13.27 29.51 7.0 52.2B4-20TEI-36 11.33 37.56 7.0 55.9 45 47.0 5.5 8.0 13.063B4-35TEI-36 14.19 34.13 7.0 58.5B4-20TEI-42 12.57 43.59 7.5 71.0 51 53.5 5.5 / 7.0 9.5 15.063B4-35TEI-42 15.93 39.65 7.5 73.9

0.44” (18”-36”)

(42”-48”)

B4-20TE-48 13.47 50.57 7.5 62.5 57 59.5 5.5 / 7.0 9.5 17.06B4-35TE-48 17.45 45.99 7.5 65.7

ALSO AVAILABLE 14” AND 16” B.W. MODELS

B4-20TEI-48 13.31 49.71 7.5 78.6 57 59.5 5.5 / 7.0 9.5 17.06B4-35TEI-48 17.18 45.24 7.5 81.9



6

Flat Carrier Idlersalso available.Same clearancedimensions as theReturn Idlers listed.

ALSO AVAILABLE14" AND 16" B.W.MODELS

Assembly Description E Bmin D Assembly Weight A C L

B4-1R-18 1.5 4.000 6.0 15.0 27.00 29.00 21.38B4-4R-18 4.5 3.563/5.000 8.0 17.2B4-1R-20 1.5 4.000 6.0 16.0 29.00 31.00 23.38B4-4R-20 4.5 3.563/5.000 8.0 18.2B4-1R-24 1.5 4.000 6.0 18.0 33.00 35.00 27.38B4-4R-24 4.5 3.563/5.000 8.0 20.2B4-1R-30 1.5 4.000 6.0 21.1 39.00 41.00 33.38B4-4R-30 4.5 3.563/5.000 8.0 23.3B4-1R-36 1.5 4.000 6.0 24.1 45.00 47.00 39.38B4-4R-36 4.5 3.563/5.000 8.0 26.3B4-1R-42 1.5 4.000 6.0 27.2 51.00 53.00 45.38B4-4R-42 4.5 3.563/5.000 8.0 29.4B4-1R-48 1.5 4.000 6.0 30.2 57.00 59.00 51.38B4-4R-48 4.5 3.563/5.000 8.0 32.5

B4 RETURN IDLERS

ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS



B4-1RRD-18 1.5 4.000 6.0 16 27.00 29.00 21.38B4-4RRD-18 4.5 3.563/5.000 8.0 18.2B4-1RRD-20 1.5 4.000 6.0 17.1 29.00 31.00 23.38B4-4RRD-20 4.5 3.563/5.000 8.0 19.3B4-1RRD-24 1.5 4.000 6.0 19.1 33.00 35.00 27.38B4-4RRD-24 4.5 3.563/5.000 8.0 21.3B4-1RRD-30 1.5 4.000 6.0 21.9 39.00 41.00 33.38B4-4RRD-30 4.5 3.563/5.000 8.0 24.1B4-1RRD-36 1.5 4.000 6.0 24.7 45.00 47.00 39.38B4-4RRD-36 4.5 3.563/5.000 8.0 26.9B4-1RRD-42 1.5 4.000 6.0 27.5 51.00 53.00 45.38B4-4RRD-42 4.5 3.563/5.000 8.0 29.8B4-1RRD-48 1.5 4.000 6.0 30.4 57.00 59.00 51.38B4-4RRD-48 4.5 3.563/5.000 8.0 32.6

B4 RUBBER DISC RETURN IDLERS

End Stands forFlat Carrier Idlers

1-1/2” Optional End Stand

C

D

5 4 3

4-1/2” Standard End Stand

D

CC

D

5 4 3 2 1

ALSO AVAILABLE 14" AND 16" B.W. MODELS


B5 IMPACT TROUGHING IDLERS


B5-20TEI-24 10.476 25.871 7.50 46.5 33 35.0 5.5 8.00 8.938B5-35TEI-24 12.390 23.145 7.50 48.5B5-20TEI-30 11.243 32.215 7.50 54.1 39 41.0 5.5 8.00 11.063B5-35TEI-30 13.627 28.948 7.50 55.4B5-20TEI-36 11.789 37.219 7.50 60.6 45 47.0 5.5 8.00 13.063B5-35TEI-36 14.592 33.568 7.50 63.2B5-20TEI-42 13.029 43.257 8.00 76.3 51 53.5 5.5 / 7.0 9.50 15.063B5-35TEI-42 16.334 39.084 8.00 79.2B5-20TEI-48 13.777 49.371 8.00 84.6 57 59.5 5.5 / 7.0 9.50 17.063B5-35TEI-48 17.587 44.671 8.00 87.9

B5 TROUGHING IDLERS


B5-20TE-18 9.907 20.538 7.50 34.3 27 29 5.5 8.00 6.75B5-35TE-18 11.435 18.214 7.50 35.9B5-20TE-20 10.204 23.041 7.50 36.6 29 31 5.5 8.00 7.625B5-35TE-20 11.935 20.506 7.50 38.3B5-20TE-24 10.658 26.870 7.50 40.3 33 35 5.5 8.00 8.938B5-35TE-24 12.695 24.016 7.50 42.2B5-20TE-30 11.385 32.991 7.50 46.1 39 41 5.5 8.00 11.063B5-35TE-30 13.914 29.625 7.50 48.3B5-20TE-36 12.070 38.765 7.50 51.7 45 47 5.5 8.00 13.063B5-35TE-36 15.064 34.915 7.50 54.3B5-20TE-42 13.249 44.463 8.50 62.8 51 53.5 5.5 / 7.0 9.50 15.063B5-35TE-42 16.702 40.135 8.50 65.7


ALSO AVAILABLE 14", 16", 18", 20" and 24" B.W. MODELS

0.44” (18”-36”)

(42”-48”)

0.44” (18”-36”)

(42”-48”)

B5-20TE-48 13.93 50.24 8.50 62.5 57 59.5 5.5 / 7.0 9.50 17.06B5-35TE-48 17.85 45.43 8.50 65.7




B5-1RRD-18 1.5 4.000 6.0 17.9 27.00 29.00 21.375B5-4RRD-18 4.5 3.563/5.000 8.0 20.1B5-1RRD-20 1.5 4.000 6.0 19.2 29.00 31.00 23.375B5-4RRD-20 4.5 3.563/5.000 8.0 21.4B5-1RRD-24 1.5 4.000 6.0 21.3 33.00 35.00 27.375B5-4RRD-24 4.5 3.563/5.000 8.0 23.5B5-1RRD-30 1.5 4.000 6.0 24.4 39.00 41.00 33.375B5-4RRD-30 4.5 3.563/5.000 8.0 26.6B5-1RRD-36 1.5 4.000 6.0 27.5 45.00 47.00 39.375B5-4RRD-36 4.5 3.563/5.000 8.0 29.7B5-1RRD-42 1.5 4.000 6.0 30.6 51.00 53.00 45.375B5-4RRD-42 4.5 3.563/5.000 8.0 32.8B5-1RRD-48 1.5 4.000 6.0 33.6 57.00 59.00 51.375B5-4RRD-48 4.5 3.563/5.000 8.0 35.9

B5 RUBBER DISC RETURN IDLERS


B5-1R-18 1.5 4.000 6.0 18.2 27.00 29.00 21.375B5-4R-18 4.5 3.563/5.000 8.0 20.7B5-1R-20 1.5 4.000 6.0 19.4 29.00 31.00 23.375B5-4R-20 4.5 3.563/5.000 8.0 21.9B5-1R-24 1.5 4.000 6.0 21.9 33.00 35.00 27.375B5-4R-24 4.5 3.563/5.000 8.0 24.4B5-1R-30 1.5 4.000 6.0 25.6 39.00 41.00 33.375B5-4R-30 4.5 3.563/5.000 8.0 28.0B5-1R-36 1.5 4.000 6.0 29.2 45.00 47.00 39.375B5-4R-36 4.5 3.563/5.000 8.0 31.7B5-1R-42 1.5 4.000 6.0 32.9 51.00 53.00 45.375B5-4R-42 4.5 3.563/5.000 8.0 35.4B5-1R-48 1.5 4.000 6.0 36.6 57.00 59.00 51.375B5-4R-48 4.5 3.563/5.000 8.0 39.1

B5 RETURN IDLERS



C

D

5 4 3


D

CC

D

5 4 3 2 1





ALSO AVAILABLE Ø4" ROLLER,18" AND 20" B.W. MODELS

C5 EQUAL TROUGHING IDLERS


C5-20TE-24 11.69 27.09 8.50 50.3 33 35.0 5. 5 / 7.0 9.50 8.94C5-35TE-24 13.77 24.51 8.50 52.4C5-20TE-30 12.54 33.21 8.63 57.5 39 41.5 5. 5 / 7.0 9.50 11.06C5-35TE-30 15.12 30.12 8.63 59.9C5-20TE-36 13.22 39.98 8.63 67.7 45 47.5 5. 5 / 7.0 9.50 13.06C5-35TE-36 16.27 35.41 8.63 70.5C5-20TE-42 14.28 44.68 9.00 75.3 51 53.5 5. 5 / 7.0 9.50 15.06C5-35TE-42 17.78 40.63 9.00 78.3C5-20TE-48 14.96 50.45 9.00 82.5 57 59.5 5. 5 / 7.0 9.50 17.06C5-35TE-48 18.93 45.92 9.00 85.8C5-20TE-54 15.65 56.23 9.00 96.2 63 65.5 7.0 10.94 19.06C5-35TE-54 20.08 51.21 9.00 100.2C5-20TE-60 16.33 62.00 9.00 103.9 69 71.5 7.0 10.94 21.06C5-35TE-60 21.23 56.50 9.00 108.3


C5 IMPACT TROUGHING IDLERS


C5-20TEI-24 11.50 26.09 8.50 55.9 33 35.0 5.5 / 7.0 9.50 8.94C5-35TEI-24 13.47 23.64 8.50 57.9C5-20TEI-30 12.40 32.43 8.63 65.6 39 41.5 5.5 / 7.0 9.50 11.06C5-35TEI-30 14.88 29.44 8.63 68.0C5-20TEI-36 12.94 37.44 8.63 77.5 45 47.5 5.5 / 7.0 9.50 13.06C5-35TEI-36 15.79 34.06 8.63 80.2C5-20TEI-42 14.06 43.47 9.00 87.3 51 53.5 5.5 / 7.0 9.50 15.06C5-35TEI-42 17.41 39.58 9.00 90.3C5-20TEI-48 14.80 49.59 9.00 96.1 57 59.5 5.5 / 7.0 9.50 17.06C5-35TEI-48 18.67 45.16 9.00 99.5C5-20TEI-54 15.35 54.59 9.00 115.3 63 65.5 7.0 10.94 19.06C5-35TEI-54 19.58 49.79 9.00 119.3C5-20TEI-60 16.10 60.71 9.00 125.7 69 71.5 7.0 10.94 21.06C5-35TEI-60 20.83 55.37 9.00 130.1

209.579.9608 • www.westcoastpulleys.com 9

10

* Flat Carrier Idlers also available. Same clearance dimensions as the Return Idlers listed.



C

D

5 4 3


D

CC

D

5 4 3 2 1


C5 RETURN IDLERS


C5-1R-24 1.5 4.000 6.0 24 33 35 27.38C5-4R-24 4.5 3.563/5.000 8.0 26C5-1R-30 1.5 4.000 6.0 29 39 41 33.38C5-4R-30 4.5 3.563/5.000 8.0 30C5-1R-36 1.5 4.000 6.0 33 45 47 39.38C5-4R-36 4.5 3.563/5.000 8.0 35C5-1R-42 1.5 4.000 6.0 37 51 53 45.38C5-4R-42 4.5 3.563/5.000 8.0 39C5-1R-48 1.5 4.000 6.0 42 57 59 51.38C5-4R-48 4.5 3.563/5.000 8.0 43C5-1R-54 1.5 4.000 6.0 46 63 65 57.38C5-4R-54 4.5 3.563/5.000 8.0 47C5-1R-60 1.5 4.000 6.0 51 69 71 63.38C5-4R-60 4.5 3.563/5.000 8.0 53

C5 RUBBER DISC RETURN IDLERS


C5-1RRD-24 1.50 4.000 6.0 25 27 29 21.38C5-4RRD-24 4.50 3.563/5.000 8.0 27C5-1RRD-30 1.50 4.000 6.0 29 29 31 23.38C5-4RRD-30 4.50 3.563/5.000 8.0 31C5-1RRD-36 1.50 4.000 6.0 33 33 35 27.38C5-4RRD-36 4.50 3.563/5.000 8.0 35C5-1RRD-42 1.50 4.000 6.0 36 39 41 33.38C5-4RRD-42 4.50 3.563/5.000 8.0 39C5-1RRD-48 1.50 4.000 6.0 40 45 47 39.38C5-4RRD-48 4.50 3.563/5.000 8.0 42C5-1RRD-54 1.50 4.000 6.0 44 51 53 45.38C5-4RRD-54 4.50 3.563/5.000 8.0 45C5-1RRD-60 1.50 4.000 6.0 48 57 59 51.38C5-4RRD-60 4.50 3.563/5.000 8.0 50





C6 EQUAL TROUGHING IDLERS


C6-20TE-18 11.405 20.415 9.00 49.3 27 29 5.5 / 7.0 9.50 6.75C6-35TE-18 12.924 18.136 9.00 51.2C6-20TE-20 11.702 22.918 9.00 52.7 29 31 5.5 / 7.0 9.50 7.625C6-35TE-20 13.423 20.429 9.00 54.6C6-20TE-24 12.156 26.749 9.00 58.0 33 35 5.5 / 7.0 9.50 8.938C6-35TE-24 14.183 23.939 9.00 60.0C6-20TE-30 13.008 32.869 9.125 66.6 39 41.5 5.5 / 7.0 9.50 11.063C6-35TE-30 15.528 29.545 9.125 69.0C6-20TE-36 13.693 38.643 9.125 78.2 45 47.5 5.5 / 7.0 9.50 13.063C6-35TE-36 16.677 34.838 9.125 80.9C6-20TE-42 14.747 44.341 9.50 87.1 51 53.5 5.5 / 7.0 9.50 15.063C6-35TE-42 18.190 40.057 9.50 90.1C6-20TE-48 15.432 50.115 9.50 95.6 57 59.5 5.5 / 7.0 9.50 17.063C6-35TE-48 19.340 45.348 9.50 98.9C6-20TE-54 16.118 55.889 9.50 110.5 63 65.5 5.5 / 7.0 10.94 19.063C6-35TE-54 20.489 50.639 9.50 114.6C6-20TE-60 16.803 61.663 9.50 119.6 69 71.5 5.5 / 7.0 10.94 21.063C6-35TE-60 21.639 55.926 9.50 124.0

C6 IMPACT TROUGHING IDLERS


C6-20TE1-24 11.984 25.749 9.00 62.4 33 35 5.5 / 7.0 9.50 8.938C6-35TE1-24 13.878 23.068 9.00 64.4C6-20TE1-30 12.867 32.092 9.125 73.4 39 41.50 5.5 / 7.0 9.50 11.063C6-35TE1-30 15.291 28.870 9.125 75.8C6-20TE1-36 13.412 37.097 9.125 86.3 45 47.50 5.5 / 7.0 9.50 13.063C6-35TE1-36 16.205 33.490 9.125 89.0C6-20TE1-42 14.528 43.135 9.50 97.4 51 53.50 5.5 / 7.0 9.50 15.063C6-35TE1-42 17.822 39.006 9.50 100.4C6-20TE1-48 15.275 49.249 9.50 107.4 57 59.50 5.5 / 7.0 9.50 17.063C6-35TE1-48 19.076 44.594 9.50 110.7C6-20TE1-54 15.820 54.254 9.50 127.5 63 65.50 7.0 10.94 19.063C6-35TE1-54 19.990 49.214 9.50 131.5C6-20TE1-60 16.568 60.638 9.50 139.2 69 71.50 7.0 10.94 21.063C6-35TE1-60 21.243 54.802 9.50 143.6




Assembly Description E Bmin D A C L

C6-1RRD-18 1.50 4.00 6.0 27 29 21.375C6-4RRD-18 4.50 3.563/5.000 8.0C6-1RRD-20 1.50 4.00 6.0 29 31 23.375C6-4RRD-20 4.50 3.563/5.000 8.0C6-1RRD-24 1.50 4.00 6.0 33 35 27.375C6-4RRD-24 4.50 3.563/5.000 8.0C6-1RRD-30 1.50 4.00 6.0 39 41 33.375C6-4RRD-30 4.50 3.563/5.000 8.0C6-1RRD-36 1.50 4.00 6.0 45 47 39.375C6-4RRD-36 4.50 8.0C6-1RRD-42 1.50 4.00 6.0 51 53 45.375C6-4RRD-42 4.50 3.563/5.000 8.0C6-1RRD-48 1.50 4.00 6.0 57 59 51.375C6-4RRD-48 8.0C6-1RRD-54 1.50 4.00 6.0 63 65 57.375C6-4RRD-54 4.50 3.563/5.000 8.0C6-1RRD-60 1.50 4.00 6.0 69 71 63.375C6-4RRD-60 4.50 3.563/5.000 8.0

Assembly Weight

------------------

4.50 3.563/5.000

3.563/5.000

C6 RUBBER DISC RETURN IDLERS



C

D

5 4 3


D

CC

D

5 4 3 2 1


Assembly Description E Bmin D A C L

C6-1R-18 1.50 4.00 6.0 27 29 21.375C6-4R-18 4.50 3.563/5.000 8.0C6-1R-20 1.50 4.00 6.0 29 31 23.375C6-4R-20 4.50 3.563/5.000 8.0C6-1R-24 1.50 4.00 6.0 33 35 27.375C6-4R-24 4.50 3.563/5.000 8.0C6-1R-30 1.50 4.00 6.0 39 41 33.375C6-4R-30 4.50 3.563/5.000 8.0C6-1R-36 1.50 4.00 6.0 45 47 39.375C6-4R-36 4.50 8.0C6-1R-42 1.50 4.00 6.0 51 53 45.375C6-4R-42 4.50 3.563/5.000 8.0C6-1R-48 1.50 4.00 6.0 57 59 51.375C6-4R-48 8.0C6-1R-54 1.50 4.00 6.0 63 65 57.375C6-4R-54 4.50 3.563/5.000 8.0C6-1R-60 1.50 4.00 6.0 69 71 63.375C6-4R-60 4.50 3.563/5.000 8.0

Assembly Weight

26.228.528.130.432.034.237.739.943.545.749.251.454.957.260.762.966.468.6

4.50 3.563/5.000

3.563/5.000

C6 RETURN IDLERS


0.44” (18”-36”)

(42”-48”)

0.44” (18”-36”)

(42”-48”)


C

D

5 4 3 2


D

CC

D

5 4 3 2 1


D6 IMPACT TROUGHING IDLERS


D6-20TEI-24 11.95 25.60 9.00 72.9 33 35.0 5.5 / 7.0 9.50 8.94D6-35TEI-24 13.86 22.95 9.00 74.9D6-20TEI-30 12.72 31.94 9.00 84.8 39 41.5 5.5 / 7.0 9.50 11.06D6-35TEI-30 15.15 28.75 9.00 87.1D6-20TEI-36 13.51 36.94 9.25 95.5 45 47.5 5.5 / 7.0 9.50 13.06D6-35TEI-36 16.40 33.94 9.25 98.3D6-20TEI-42 14.75 42.98 9.75 115.8 51 53.5 7.0 9.50 15.06D6-35TEI-42 18.14 39.46 9.75 119.2D6-20TEI-48 15.50 49.10 9.75 128.3 57 59.5 7.0 9.50 17.06D6-35TEI-48 19.40 45.05 9.75 132.1D6-20TEI-54 16.50 55.21 10.00 155.7 63 65.5 7.0 10.94 19.06D6-35TEI-54 20.90 50.63 10.00 159.8D6-20TEI-60 17.04 60.22 10.00 168.1 69 71.5 7.0 10.94 21.06D6-35TEI-60 21.82 55.25 10.00 172.6D6-20TEI-72 18.54 72.44 10.00 196.1 81 83.5 7.0 10.94 25.06D6-35TEI-72 24.32 66.43 10.00 201.3

D6 EQUAL TROUGHING IDLERS


D6-20TE-24 12.13 26.69 9.00 56 33 35.0 5.5 9.50 8.94D6-35TE-24 14.25 24.06 9.00 57D6-20TE-30 13.06 32.94 9.13 66 39 41.5 5.5 9.50 11.13D6-35TE-30 15.69 29.81 9.13 68D6-20TE-36 13.75 39.13 9.13 75 45 47.5 5.5 9.50 13.25D6-35TE-36 16.81 35.44 9.13 76D6-20TE-42 14.88 45.44 9.50 93 51 53.5 7.0 10.94 15.44D6-35TE-42 18.44 41.19 9.50 96D6-20TE-48 15.63 51.75 9.50 103 57 59.5 7.0 10.94 17.63D6-35TE-48 19.69 46.94 9.50 106D6-20TE-54 16.75 57.81 10.00 118 63 65.5 7.0 10.94 19.75D6-35TE-54 21.31 52.56 10.00 125D6-20TE-60 17.38 63.56 10.00 128 69 71.5 7.0 10.94 21.75D6-35TE-60 22.44 57.88 10.00 134


D6 RETURN IDLERS


D6-1R-24 1.5 4.000 6.0 35.6 33 35 27.38D6-4R-24 4.5 3.563/5.000 8.0 37.6D6-1R-30 1.5 4.000 6.0 41.8 39 41 33.38D6-4R-30 4.5 3.563/5.000 8.0 43.8D6-1R-36 1.5 4.000 6.0 48.0 45 47 39.38D6-4R-36 4.5 3.563/5.000 8.0 50.0D6-1R-42 1.5 4.000 6.0 54.2 51 53 45.38D6-4R-42 4.5 3.563/5.000 8.0 56.2D6-1R-48 1.5 4.000 6.0 60.4 57 59 51.38D6-4R-48 4.5 3.563/5.000 8.0 62.4D6-1R-54 1.5 4.000 6.0 66.2 63 65 57.38D6-4R-54 4.5 3.563/5.000 8.0 68.6D6-1R-60 1.5 4.000 6.0 72.8 69 71 63.38D6-4R-60 4.5 3.563/5.000 8.0 74.8


D6-1RRD-24 1.5 4.000 6.0 36.2 33.00 35.00 27.375D6-4RRD-24 4.5 3.563/5.000 8.0 38.2D6-1RRD-30 1.5 4.000 6.0 41.8 39.00 41.00 33.375D6-4RRD-30 4.5 3.563/5.000 8.0 43.8D6-1RRD-36 1.5 4.000 6.0 47.4 45.00 47.00 39.375D6-4RRD-36 4.5 3.563/5.000 8.0 49.4D6-1RRD-42 1.5 4.000 6.0 53 51.00 53.00 45.375D6-4RRD-42 4.5 3.563/5.000 8.0 54.9D6-1RRD-48 1.5 4.000 6.0 58.5 57.00 59.00 51.375D6-4RRD-48 4.5 3.563/5.000 8.0 60.5D6-1RRD-54 1.5 4.000 6.0 64.1 63.00 65.00 57.375D6-4RRD-54 4.5 3.563/5.000 8.0 66.1

D6 RUBBER DISC RETURN IDLERS





C

D

5 4 3


D

CC

D

5 4 3 2 1

D6-1RRD-60 1.5 4.000 6.0 69.7 69.00 71.00 63.375D6-4RRD-60 4.5 3.563/5.000 8.0 71.7D6-1RRD-72 1.5 4.000 6.0 80.9 81.00 83.00 75.38D6-4RRD-72 4.5 3.563/5.000 8.0 82.8

ALSO AVAILABLE Ø5" ROLLER MODELS

D6-1R-72 1.5 4.000 6.0 85.3 81 83 75.38D6-4R-72 4.5 3.563/5.000 8.0 87.2


0.44” (18”-36”)

(42”-48”)

0.44” (18”-36”)

(42”-48”)

E7 IMPACT TROUGHING IDLERS


E7-20TEI-36 15.57 37.54 11.25 160.9 45 47.5 7.5 12.00 13.00E7-35TEI-36 18.40 33.93 11.25 161.6E7-20TEI-42 16.31 43.65 11.25 175.0 51 53.5 7.5 12.00 15.00E7-35TEI-42 19.66 39.52 11.25 179.5E7-20TEI-48 17.19 51.22 11.25 196.9 57 59.5 7.5 12.00 17.75E7-35TEI-48 21.12 46.47 11.25 201.9E7-20TEI-54 17.94 57.33 11.25 214.4 63 65.5 7.5 12.00 19.75E7-35TEI-54 22.38 52.05 11.25 219.6E7-20TEI-60 18.69 63.45 11.25 231.8 69 71.5 7.5 12.00 21.75E7-35TEI-60 23.63 57.64 11.25 237.6E7-20TEI-66 19.98 68.45 12.00 270.7 75 77.5 9.0 14.50 23.75E7-35TEI-66 25.29 62.26 12.00 277.6E7-20TEI-72 20.72 74.49 12.00 289.5 81 83.5 9.0 14.50 25.75E7-35TEI-72 26.54 67.78 12.00 296.9

D

5 4 3 2

E7 EQUAL TROUGHING IDLERS


E7-20TE-36 15.84 39.03 11.25 144.3 45 47.5 7.5 12.00 13.00E7-35TE-36 18.86 35.23 11.25 148.3E7-20TE-42 16.52 44.80 11.25 159.4 51 53.5 7.5 12.00 15.00E7-35TE-42 20.01 40.52 11.25 163.9E7-20TE-48 17.47 52.73 11.25 178.8 57 59.5 7.5 12.00 17.75E7-35TE-48 21.58 47.78 11.25 183.8E7-20TE-54 18.15 58.50 11.25 193.9 63 65.5 7.5 12.00 19.75E7-35TE-54 22.73 53.07 11.25 199.2E7-20TE-60 18.84 64.28 11.25 209.1 69 71.5 7.5 12.00 21.75E7-35TE-60 23.88 58.37 11.25 214.9E7-20TE-66 20.27 70.05 12.00 241.6 75 77.5 9.0 14.50 23.75E7-35TE-66 25.78 63.66 12.00 247.0E7-20TE-72 20.95 75.75 12.00 257.8 81 83.5 9.0 14.50 25.75E7-35TE-72 26.92 68.88 12.00 265.2

E7-20TEI-84 22.26 85.53 12.50 327.3 93 95.5 9.0 14.50 29.75E7-35TEI-84 28.94 77.91 12.50 335.8E7-20TEI-96 23.75 97.76 12.50 365.0 105 10.75 9.0 14.50 33.75E7-35TEI-96 31.45 89.09 12.50 374.5

E7-20TE-84 22.56 87.22 12.50 290.8 93 95.5 9.0 14.50 29.75E7-35TE-84 29.46 79.39 12.50 299.3E7-20TE-96 23.94 98.77 12.50 323.4 105 107.5 9.0 14.50 33.75E7-35TE-96 31.76 89.97 12.50 332.9




E7 RETURN IDLERS


E7-7R-36 7.0 7.50/9.00 12.0 87.3 45 47.5 40E7-7R-42 7.0 7.50/9.00 12.0 97.8 51 53.5 46E7-7R-48 7.0 7.50/9.00 12.0 108.2 57 59.5 52E7-7R-54 7.0 7.50/9.00 12.0 118.7 63 65.5 58E7-7R-60 7.0 7.50/9.00 12.0 129.2 69 71.5 64E7-7R-66 7.0 7.50/9.00 12.0 136.9 75 77.5 70E7-7R-72 7.0 7.50/9.00 12.0 150.1 81 83.5 76

*Flat Carrier Idlers also available. Same clearance dimensions as the Return Idlers listed.


E7-1RRD-36 1.50 7.50 / 9.00 12.0 80.2 45.00 47.5 40.00E7-4RRD-36 4.50 7.50 / 9.00 12.0 80.1E7-1RRD-42 1.50 7.50 / 9.00 12.0 89.4 51.00 53.5 46.00E7-4RRD-42 4.50 7.50 / 9.00 12.0 89.3E7-1RRD-48 1.50 7.50 / 9.00 12.0 98.5 57.00 59.5 52.00E7-4RRD-48 4.50 7.50 / 9.00 12.0 98.4E7-1RRD-54 1.50 7.50 / 9.00 12.0 107.7 63.00 65.5 58.00E7-4RRD-54 4.50 7.50 / 9.00 12.0 107.5E7-1RRD-60 1.50 7.50 / 9.00 12.0 116.8 69.00 71.5 64.00E7-4RRD-60 4.50 7.50 / 9.00 12.0 116.7E7-1RRD-66 1.50 7.50 / 9.00 12.0 125.9 75.00 77.5 70.00E7-4RRD-66 4.50 7.50 / 9.00 12.0 125.8E7-1RRD-72 1.50 7.50 / 9.00 12.0 135.1 81.00 83.5 76.00E7-4RRD-72 4.50 7.50 / 9.00 12.0 135.0

E7 RUBBER DISC RETURN IDLERS




ALSO AVAILABLE 7" AND 4-1/2" DROP BELT-SAVER "S", AND 1-1/2" AND 4-1/2" DROP REGULAR BRACKETS


ALSO AVAILABLE 7" DROP BELT-SAVER "S", AND 7" DROP REGULAR BRACKETS

E7-7R-84 7.0 7.50/9.00 12.0 171.0 93 95.5 88E7-7R-96 7.0 7.50/9.00 12.0 191.9 105 107.5 100E7-7R-102 7.0 7.50/9.00 12.0 202.4 111 113.5 106

ALSO AVAILABLE 7" END STAND BRACKETS

ALSO AVAILABLE 84", 96 AND 102" B.W. MODELS

1/4"

1-1/4"

1-1/4"

1/4"

2-13/16”


CEMA C

24 900 900 900 32530 900 900 900 250 50036 900 837 810 200 50042 850 791 765 150 50048 800 744 720 125 50054 750 698 675 * 50060 700 650 630 * 500

18 900 900 900 475

* Van Gorp Idlers meet or exceed CEMA standards.

CEMA Load Ratings

CEMA Load Ratings for CEMA D Idlers (Lbs)

Idler Class

Belt Width (In)

Trough Single Roll Return

Two Roll Vee Return 20˚ 35˚ 45˚

CEMA D

24 1200 1200 60030 1200 1200 60036 1200 1200 600 85042 1200 1200 500 85048 1200 1200 425 85054 1200 1080 375 85060 1150 1035 280 850

CEMA Load Ratings for CEMA C Idlers (Lbs)

Idler Class

Belt Width (In)



CEMA Load Ratings for CEMA B Idlers (Lbs)

Idler ClassBelt Width

(In)



CEMA B

18 410 410 410 22020 410 410 410 20024 410 410 410 19030 410 410 410 16536 410 410 396 15542 390 363 351 140

CEMA Load Ratings for CEMA E Idlers (Lbs)

Idler Class

Belt Width (In)



CEMA E

36 1800 1800 1800 1000 130042 1800 1800 1800 1000 130048 1800 1800 1800 1000 130054 1800 1800 1800 925 130060 1800 1800 1800 850 130066 775 130072 1800 1800 1800 700 130084 1674 1674 1620 550 130096 1750 1628 1575 400 1300

72 1050

1200120012001200120011161070977 945 155 850

48 380 353 342 125


Idler Warranty:

We warrant our CEMA Class Idlers against defects in material or workmanship for a period of 36 Months from the date of shipment. The Idlers shall be installed in accordance with manufacturers’ recommendations; the loads shall not exceed the normal conditions. Whenever, under the warranty, it is necessary for you to replace parts or Idlers, Van Gorp shall furnish such items free of charge, Exworks/FCA, Pella Iowa. No allowance will be made for any expense incurred in repairing or replacing defective Idlers, or supplying any missing parts, except with the written consent of Van Gorp. We warrant our Endurance Class Idlers against defects in material or workmanship for a period of 120 Months from the date of shipment. It is required that you have filled in a data sheet for each conveyor system at time of order. The Idlers shall be installed in accordance with manufacturers’ recommendations; the loads shall not exceed the normal conditions. This warranty only applies to the specific conveyor for which the idlers were specifically designed for. Whenever, under the warranty, it is necessary for you to replace parts or Idlers, a current data sheet must be submitted and Van Gorp shall furnish such items free of charge, Exworks/FCA, Pella Iowa. No allowance will be made for any expense incurred in repairing or replacing defective Idlers, or supplying any missing parts, except with the written consent of Van Gorp All warranty claims must be submitted in writing using the Van Gorp Warranty Claim form The statements above are a partial summary of the full Van Gorp Standard Terms and Conditions of Sale which were in affect at time of sale and shall define and govern all terms and conditions of the sale.

Van Gorp Corporation 1410 Washington St.

Pella, Iowa 50219 1(641) 628-9212 : 1(800) 826-4677

www.vangorp.biz

Idler Warranty:

We warrant our CEMA Class Idlers against defects in material or workmanship for a period of 36 Months from the date of shipment. The Idlers shall be installed in accordance with manufacturers’ recommendations; the loads shall not exceed the normal conditions. Whenever, under the warranty, it is necessary for you to replace parts or Idlers, Van Gorp shall furnish such items free of charge, Exworks/FCA, Pella Iowa. No allowance will be made for any expense incurred in repairing or replacing defective Idlers, or supplying any missing parts, except with the written consent of Van Gorp. We warrant our Endurance Class Idlers against defects in material or workmanship for a period of 120 Months from the date of shipment. It is required that you have filled in a data sheet for each conveyor system at time of order. The Idlers shall be installed in accordance with manufacturers’ recommendations; the loads shall not exceed the normal conditions. This warranty only applies to the specific conveyor for which the idlers were specifically designed for. Whenever, under the warranty, it is necessary for you to replace parts or Idlers, a current data sheet must be submitted and Van Gorp shall furnish such items free of charge, Exworks/FCA, Pella Iowa. No allowance will be made for any expense incurred in repairing or replacing defective Idlers, or supplying any missing parts, except with the written consent of Van Gorp All warranty claims must be submitted in writing using the Van Gorp Warranty Claim form The statements above are a partial summary of the full Van Gorp Standard Terms and Conditions of Sale which were in affect at time of sale and shall define and govern all terms and conditions of the sale.

Van Gorp Corporation 1410 Washington St.

Pella, Iowa 50219 1(641) 628-9212 : 1(800) 826-4677

www.vangorp.biz


19

NOTES


World Class QualityA Division of Van Gorp®

CALL FOR PRICE & AVAILABILITY

209.579.9608

VISIT OUR WEBSITE FOR MORE INFORMATION

www.westcoastpulleys.com

CONVEYOR PULLEY & COMPONENTS INC.CPC

VAN GORP®

CPCI 7-17

cpc - conveyor pulley and...

Documents