cpe pressure vessels
TRANSCRIPT
EURASIAN ECONOMIC UNION CERTIFICATE OF CONFORMITY
No. ЕАЭС RU C-GB.БЛ08.A.01179/21
Series RU No.0266849
CERTIFICATION
BODY
Product and Service Certification Body “IVANOVO-CERTIFICATE” LLC
“Ivanovo Fund of Certification”. Legal Address: 153032, Russian Federation,
Ivanovo region, Ivanovo, Stankostroiteley street, h.1, room 169, fl. 4; Actual Address: 153032, Russian Federation, Ivanovo region, Ivanovo, Stankostroiteley
street, h.1; tel. (4932) 77-34-67; E-mail: [email protected]; Registration certificate No.
RA.RU.11БЛ08 issued 24.03.2016 by Federal Accreditation Service
APPLICANT LLC “Rustek”
Address: 194044, Russia, Saint-Petersburg, Vyborgskaya nab., 43 “A”of. 4
OGRN 104007855014240 Tel: +7 812 7030785, E-mail: [email protected]
MANUFACTURER "СPE Pressure Vessels Limited"
Address: Apollo, Lichfield Road Industrial Estate, Tamworth, Staffordshire, B79 7TA, UK
PRODUCTS Equipment, operated under excessive pressure: Receivers, mark CPE,
technical parameters refer to the Supplement (blank No.0741906)
Manufactured as per European Directive 2014/68/EU, ASME VIII DIV-1:2019,
design codes PD 5500 and EN 13445.
Serial production
TARIFF CODE 7311009100, 7309001000, 7310100000
CONFORM TO
REQUIREMENTS OF
Customs Union Technical Regulation CU TR 032/2013 "On the safety of equipment operated under pressure"
CERTIFICATE IS
ISSUED BASED ON
Test Reports No.210331/П-02И dated 31.03.2021, issued by Testing Laboratory
"Ivanovskiy Centre of Certification" LLC "Ivanovskiy Fund of Certification"
(Accreditation Certificate No.RA.RU.21АЮ21). Factory Audit Report
No.20101204/ТРТС/РА dated 02.11.2020, issued by CB “IVANOVO-CERTIFICATE” LLC “Ivanovskiy Fund of Certification” (Accreditation Certificate
No.RA.RU.11БЛ08). Safety Justification No.CPE-13584-ОБ-RU dated
06.08.2020.The Technical Passports n/n dated 14.10.2020. Operation Manual No. IOM 72248-67 dated 12.08.2020; Design documentation; Strength calculation;
Production procedures and data on manufacturing process; Data on tests carried out;
Manufacturer Test Reports; Personnel qualifications certificates.
Certification scheme: 1c.
ADDITIONAL
INFORMATION
Refer to the Supplement – blank No.0741907
CERTIFICATE IS
VALID
From 05.04.2021 to 04.04.2026 INCLUDED
Head of Certification
Body
Expert
Urov A.V.
Kabeshev A.A.
EURASIAN ECONOMIC UNION
SUPPLEMENT TO CERTIFICATE OF CONFORMITY No. ЕАЭС RU C-GB.БЛ08.A.01179/21
Series RU No.0741906
The list of similar products covered by the certificate of conformity
CU TN VED code
Name, types, models of similar products,
сcomponent parts of product or units
Designation of the
documentation for which the
products are manufactured
7311009100
7309001000
7310100000
Equipment, operated under excessive pressure:
Receivers, mark CPE
Technical parameters: Operating medium: gases of Group 1 and 2;
MAWP: above 0,05 MPa to 5 МПа
Capacity: above 0,02 m3 Product of the maximum allowable working pressure
and the capacity value - over 0.02 MPa•m3;
Equipment category as per CU TR 032/2013:
3 and 4.
Head of Certification Body Urov A.V. Expert Kabeshev A.A.
EURASIAN ECONOMIC UNION
SUPPLEMENT TO CERTIFICATE OF CONFORMITY No. ЕАЭС RU C-GB.БЛ08.A.01179/21
Series RU No.0741907
Standards, as a result of which, on a voluntary basis, compliance with the requirements of the Technical Regulations of
the Customs Union is ensured
Standard designation Standard description
GOST 34347-2017 The steel welded vessels and apparatus. The general
technical conditions
The representation agreement with LLC “Rustek” No. 119-20 dated 29.07.2020
The designated vessel life is 20 years.
Head of Certification Body Urov A.V.
Expert Kabeshev A.A.