cpko tsb indiagoodluckmkt.com/pdf/industrial_pump/cpk_o/cpko_data.pdf · standardized chemical...
TRANSCRIPT
CPKO
Page | 1
Product Data 2737.1 G3
Technical Specification Standardized chemical pumps
1. Design
Horizontal, radially split volute casing pump in back pull-out design, with semi open Impeller, single-entry, single-stage; to EN 22 858/ISO 2858/ISO 5199; Complemented by pumps of DN 25.
2. Application
Handling aggressive, polymerizing media or media liable to form lumps as well as gas-containing liquids in the chemical and petrochemical industries.
3. Designation
Type series --------------------- Open impeller ------------------ Material of wetted parts ------ Discharge nozzle DN --------- Nominal impeller dia. in mm
4. Operating data
Parameters
Flow, Q 100 m³/h
Head, H 85 m Nom. Sizes, DN DN 25 to DN 65 Pressure, Bar 16 Bar / 25 Bar Temperature limits -70 to 300 Deg C
Chemical standard pumps According to ISO 2858 / DIN 24 256 and ISO 5199
With Semi-open impeller
CPKO
Page | 2
Family Curves
Below are the family curves for nominal speed at 50Hz of supply frequency. Initial selection of the pump is to be done from these curves. If the required operating speed is different from the nominal speed, then the operating parameters should be converted to the nominal speed and then the selection is to be done.
Highlighted 14 Models will be available from KSB India.
CPKO
Page | 3
5. Pressure and temperature limits
Refer to CPK Type series booklet for details. 6. Material of Construction
Parts Material GC Material E, EC Material C*
1 VOLUTE CASING CI FG260 WCB CF8M
2 CASING COVER CI FG260 WCB CF8M
3 ST. BOX PK. RING (PKG) CI FG260 CI FG260 CF8M
4 LANTERN RING (PKG) CI FG260 CI FG260 CF8M 5 NECK RING (PKG) CI FG260 CI FG260 TYPE 316
6 ST. BOX GLAND (PKG) CI FG260 CI FG260 CF8M
7 SHAFT PROT SLEEVE (PKG) TYPE 316 TYPE 410 TYPE 316 8 IMPELLER CF8M WCB, CF8M CF8M
9 IMPELLER NUT CF8M CF8M CF8M
10 WEAR PLATE CI FG260 WCB, CF8M CF8M
11 SHAFT 45C8, Type 410 45C8, Type 410 45C8, 410, 1.4462
* Models 25-160, 25-200 & 65-160 are not available in GC variant.
Notes: 1) When Vu>40 m/sec. or operating temp. 250°C to 300°C use CF8M for Impeller. 2) Fasteners of grade B7/2H should be offered if operating temperature > 250°C. 3) Shaft is given in 45C8 for operating temperature in the range -10°C to +250°C. For
temperature > 250°C; shaft material is A 276 Type 410. For temperature -10 to -40°C; shaft material is 1.4462.
4) Bearing bracket lantern is given in WCB if operating temperature > 200 °C & for hot water above 180°C. Bearing bracket lantern in CF8M if operating temperature < -30°C.
7. Flanges:
Refer CPK type series booklet for details.
8. Bearing Bracket:
The bearing bracket houses bearings as follows,
CPKO
Page | 4
9. General Assembly Drawings with Lists of Components
CPKO
Page | 5
CPKO
Page | 6
10. Pump Dimensions:
CPKO
Page | 7
11. Auxiliary connections on Pump:
* For casing drain threaded and seal welded, termination of drain piping by DN 15 ANSI flanges for P 25/62.
CPKO
Page | 8
12. Pump weights:
Pump Sizes CPKO GC
, Kg CPKO C / E, EC
, Kg
25‐160 32 39
25‐200 38 43
32‐125 34 40
32‐160 35 41
32‐200 42 51
40‐160 37 43
40‐200 43 51
50‐160 40 46
50‐200 47 52
32‐250 79 88
40‐250 79 88
50‐250 79 89
65‐160 62 77
65‐200 69 84
For more details, refer Type series booklet of CPK.