crawler crane experts in the uk & europe | delden cranes · ˇ˘˘ ˘ ˛ ˘ lr 1100 9 max....

��

��

��

2 LR 1100

�� The operating weight includes the basic machine with crawlers, 2 mainwinches 120 kN and 14 m main boom, consisting of A–frame, boom foot(5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbodycounterweight and 100 t hook block.

Total weight approx. 109.8 t

�� Ground bearing pressure 1.14 kg/cm2

��

��Main boom (No. 1311.xx) max. length 68 mHigh reach (1311.xx and 1008.xx) 83 mLuffing jib (No. 1008.xx) max. length 62 mMax. combination boom 38 m and luffing jib 62 mFixed jib (No. 0806.xx) 11 m – 32 mAuxiliary jib 24 t lifting capacity (option 36 t)

��1. The lifting capacities stated are valid for lifting operation only

(corresponds with crane classification according to F.E.M. 1.001,crane group A1)

2. Crane standing on firm, horizontal ground.

3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.)must be deducted from the gross lifting capacity to obtain a net liftingvalue.

4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) mustbe deducted to get the net lifting capacity.

5. For max. wind speed please refer to lift chart in operator’s cab ormanual.

6. Working radii are measured from centre of swing and under load.

7. The lifting capacities are valid for 360 degrees of swing.

8. Calculation of stability under load is based on DIN 15019 / part 2 / chart 1and ISO 4305 Table 1 + 2, tipping angle 4�.

9. The structures are calculated according to F.E.M. 1.001 – 1998(EN 13001–2 / 2004).

LR 1100 3

*) Including pendant straps

with undercarriage, boom foot (No. 1311.22), A–frame, 2x 120 kN cranewinches including wire ropes (260 m), without basic counterweight

��

Weight kg 57150Width mm 3500

Flat track shoes mm 900

��


�� (No. 1311.22) � �

Weight* kg 590Width mm 1400

�� (No. 1311.22) � �


�� (No. 1311.21) ��


�� (No. 1311.21)


�� (No. 1311.xx)

�� Length mm 12140Weight* kg 5280

��

with boom foot (No. 1311.22), A–frame, 2x 120 kN crane winchesincluding wire ropes (260 m), without basic counterweight and crawlers

��


4 LR 1100


!�""� #�$ �� (No. 1008.17)


!�""� #�$ �� (No. 1008.17) � �


!�""� #�$ �� (No. 1008.17) ��


!�""� #�$ "�� %&"�� (No. 1008.20)


!�""� #�$ �� (No. 1008.17) � �


�� (No. 1008.xx)

'�� #�$ �� (No. 0806.16)


'�� #�$ �� (No. 0806.15) � �


'�� #�$ �� (No. 0806.15) � �


'�� #�$ "�� %&"�� (No. 0806.16)


�� (No. 1311/1008.21)��


�� (No. 0806.xx)


!�""� #�$ �� (No. 1309.22)


!�""� #�$ �� (No. 1309.20) � �


!�""� #�$ �� (No. 1309.20) ��() �


!�""� #�$ "�� %&"�� (No. 1309.20)


!�""� #�$ �� (No. 1309.20) � �


�� (No. 1309.xx)

LR 1100 5

�� !��

�� *�


��


��$��+ ��


�** � �� $�� & , ��-��

Weight kg 1300 1800 2300Width mm 540 640 770

��(, � ��


.* � �� $�� & � ��-�


��"�

6 LR 1100

/* � �� $�� & � ��-��


��

Power rating according to ISO 9249, 270 kW (362 hp) at 2000 rpmEngine type Liebherr D 936 L A6Fuel tank 800 l capacity with continuous level indicator

and reserve warningEngine complies with NRMM exhaust certification EPA / CARB Tier 3 and97/68 EC Stage III

0+�� +��

A double axial displacement pump supplies the open loop hydraulic system,allowing all functions to be operated simultaneously. To minimize peakpressure an automatic working pressure cut–off is integrated in the pump.All filters are electronically monitored.The use of synthetic environmentally friendly (biodegradable) oils is possible.Working pressure max. 350 barOil tank capacity 650 l

1��

Line pull (1st layer) max. 175 kNLine pull (7th layer) 120 kNRope diameter 26 mmDrum diameter 580 mmRope speed m/min 0 – 136Rope capacity in 7 layers 489 mThe winches are outstanding in their compact design and easy assembly.Propulsion is via a planetary gearbox in an oil bath.Load support by the hydraulic system; additional safety factor provided bya spring loaded, multi–disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors.This system features sensors that automatically adjust oil flow to providemax. winch speed depending on load. Option – winch with freefall system:Clutch and braking functions on the freefall system are provided by acompact designed, low wear and maintenance free multi–disc brake.

!�""� #�$ ��

Line pull max. 105 kNRope diameter 20 mmJib luffing 48 sec. from 15� to 78�

��

Line pull max. 126 kNRope diameter 20 mmBoom up 44 sec. from 15� to 86�

��

Propulsion through axial piston motor, hydraulically released spring loadedmulti–disc brake, crawler tracks, hydraulic chain tensioning device.Flat track shoes 900 mmDrive speed 0 – 1.35 km/h

2��

Noise emissions correspond with 2000/14/EC directive on noise emissionby equipment used outdoors.

��

LR 1100 7

3��

Consists of rollerbearing with external teeth, swing drive with fixed axialpiston hydraulic motor, spring loaded and hydraulically releasedmulti–disc holding brake, planetary gearbox and pinion.Both swing modes are possible – speed control or free swing.A multi–disc holding brake acts automatically at zero swing motion.Swing speed from 0 – 1.8 rpm continuously variable.

��

The control system – developed and manufactured by Liebherr – isdesigned to withstand extreme environmental conditions such astemperature, vibration and electromagnetic interference and to meet allrequirements that are needed in heavy duty crane operation.Complete machine operating data are shown on a high resolution display.Standard operational information is displayed by means of graphicalsymbols, fault indications are displayed in plain text (more than 15languages available).The cranes are equipped with proportional control for all main movements,which can be carried out simultaneously.The crane is operated with 2 multi–directional joysticks, the right for winch Iand boom, the left for winch II and swing control.Option:Bi–directional double T–levers for simultaneous boom and luffing jiboperation.The crawlers are activated by the two central foot pedals. Additionally,hand levers can be attached to the pedals.Remote control for assembly of counterweight.

��

8 LR 1100

Main boom No. 1311.xx 68 m Max. combination 85.0 mMax. combination 83.0 mMain boom No. 1311.xx 32.5 mTapered No. 1311/1008.xx 12.0 mLuffing jib No. 1008.xx 38.5 m

Main boom No. 1311.xx 53.0 mFixed jib No. 0806.xx 32.0 m

5.5 m (18 ft)No. 1311.22

3.0 m (10 ft)No. 1311.22

3.0 m (10 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

12.0 m (40 ft)No. 1311.21

12.0 m (40 ft)No. 1311.21

12.0 m (40 ft)No. 1311.21

8.5 m (28 ft)No. 1311.21

5.5 m (18 ft)No. 1311.22

3.0 m (10 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

12.0 m (40 ft)No. 1311.21

Tapered 12.0 m (40 ft)No. 1311/1008.21

3.0 m (10 ft)No. 1008.17

6.0 m (20 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

5.5 m (18 ft)No. 1008.17

5.5 m (18 ft)No. 1311.22

3.0 m (10 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

12.0 m (40 ft)No. 1311.21

8.5 m (28 ft)No. 1311.21

6.0 m (20 ft)No. 0806.15

6.0 m (20 ft)No. 0806.15

5.5 m (18 ft)No. 0806.16

12.0 m (40 ft)No. 1311.21

6.0 m (20 ft)No. 0806.15

3.0 m (10 ft)No. 0806.15

5.5 m (18 ft)No. 0806.16

��

LR 1100 9

Max. combination 100.0 m Max. combination 101.8 m

Main boom No. 1311.xx 41.0 mLuffing jib No. 1008.xx 44.0 m




5.5 m (18 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

12.0 m (40 ft)No. 1311.21

5.5 m (18 ft)No. 1008.20

8.5m (28 ft)No. 1311.21

3.0 m (10 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

12.0 m (40 ft)No. 1008.17

5.5 m (18 ft)No. 1008.17

5.5 m (18 ft)No. 1311.22

3.0 m (10 ft)No. 1311.22

6.0 m (20 ft)No. 1311.22

12.0 m (40 ft)No. 1311.21

5.5 m (18 ft)No. 1309.22

8.5m (28 ft)No. 1311.21

3.0 m (10 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (40 ft)No. 1309.20

11.7 m (40 ft)No. 1309.20

5.5 m (18 ft)No. 1309.22

6.0 m (20 ft)No. 1309.20

10 LR 1100

#��

Unloading of basic machine (Optional)

Unloading and assembly of crawlers

Unloading and assembly of counterweight

Unloading and assembly of boom

Unloading of basic machine (Standard)

Unloading and assembly of carbody counterweight

$�� "��

LR 1100 11

Assembly of boom

Erecting of main boom and luffing jib Working position

Reeving of hoist and jib ropes

12 LR 1100

4�� & �� $�� (No. 1311.xx) /�� & �,��(� � �� , � ��$��+ ��

Auxiliary jib 24 t

The maximum capacity ofthe auxiliary jib is 24 t.The corresponding loadchart is programmed in theLMI system.

1�� $�� "�� (Table 1 – No. 1311.xx)Configuration for boom lengths (14 m – 68 m)

Length Amount of boom extensionsBoom foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Boom insert 3.0 m 1 1 1 1 1 1 1 1 1 2Boom insert 6.0 m 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 2Boom insert 12.0 m 1 1 1 1 2 2 2 2 3 3 3 3 3Boom head 8.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Boom length (m) 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68

�� (No. 1311.xx)

LR 1100 13

Capacities in metric tons for boom lengths (14 m – 68 m) – with 120 kN winches32.3 t counterweight and 15 t carbody counterweight

Boom length in (m)

Radius 14 20 26 32 38 44 50 56 62 68 Radius

(m) t t t t t t t t t t (m)

3.1 104.5 3.1

4 103.7 94.1 78.0 4

5 82.2 73.2 65.8 59.8 50.5 5

6 65.8 59.7 54.6 50.2 46.4 35.2 27.7 6

7 54.8 50.3 46.5 43.2 40.2 34.3 26.9 18.6 15.2 10.9 7

8 46.8 43.4 40.4 37.8 35.3 33.1 26.2 18.2 14.9 10.8 8

9 39.5 38.1 35.6 33.5 31.5 29.7 25.2 17.9 14.6 10.5 9

10 34.1 33.9 31.8 30.0 28.3 26.8 24.5 17.5 14.2 10.2 10

12 26.6 26.7 26.1 24.8 23.4 22.3 21.1 16.9 13.5 9.7 12

14 21.6 21.7 21.6 20.9 19.9 18.9 17.9 15.9 13.0 9.3 14

16 18.1 18.0 18.0 17.1 16.3 15.5 14.7 12.1 8.9 16

18 15.5 15.4 15.3 15.0 14.3 13.5 12.8 10.9 8.4 18

20 13.3 13.3 13.2 13.0 12.6 12.0 11.4 10.6 8.1 20

22 11.7 11.6 11.4 11.2 10.6 10.1 9.5 7.8 22

24 10.3 10.3 10.1 9.9 9.5 9.0 8.4 7.3 24

26 9.1 9.1 8.9 8.8 8.5 8.0 7.5 6.9 26

28 8.2 8.0 7.8 7.6 7.2 6.7 6.2 28

30 7.3 7.1 7.0 6.7 6.5 6.0 5.5 30

32 6.6 6.4 6.3 6.0 5.8 5.4 4.9 32

34 5.8 5.6 5.4 5.2 4.8 4.4 34

36 5.2 5.1 4.8 4.7 4.3 3.9 36

38 4.7 4.6 4.4 4.2 3.9 3.4 38

40 4.1 3.9 3.7 3.5 3.0 40

42 3.7 3.5 3.3 3.1 2.7 42

44 3.3 3.1 3.0 2.7 2.3 44

46 2.8 2.6 2.4 2.0 46

48 2.5 2.3 2.1 48

50 2.2 2.0 50

Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator’s cab or manual.

14 LR 1100

! & $�� (No. 1311 / 1008.xx),* � & /� �4�� /�� & �,�

! & $�� "�� (,�� $�� (No. 1311.xx / No. 1008.xx)Configuration for L – boom lengths (50 m – 83 m)

Length Amount of boom and luffing jib extensions

Boom foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1

Boom insert 3.0 m 1 1 1 1 1 1 1 1 1 1 1 1

Boom insert 6.0 m 2 2 2 2 2 2 2 2 2 2 2 2

Boom insert 12.0 m 1 1 1 1 1 1 1 1 1 1 1 1

Tapered 12.0 m 1 1 1 1 1 1 1 1 1 1 1 1

Luffing insert 3.0 m 1 1 1 1 1 1

Luffing insert 6.0 m 1 1 1 1 1 1

Luffing insert 12 m 1 1 1 1 2 2 2 2

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1

Max. L – boom length (m) 50 53 56 59 62 65 68 71 74 77 80 83

�� % �� (No. 1311 / 1008.xx)

LR 1100 15

Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator’s cab or manual.

1�� $�� (, �Capacities in metric tons32.3 t counterweight and 15 t carbody counterweight

L – boom length in (m)

50 62 74 83

Radius (m) t t t t

5.2 27.0

6 26.6 13.2

7 25.5 12.8 6.3

8 24.5 12.2 6.1 3.8

9 23.0 10.7 5.8 3.7

10 22.3 10.2 5.6 3.6

12 20.6 9.4 5.1 3.3

14 18.8 8.6 4.7 3.0

16 16.3 8.0 4.3 2.8

18 14.4 7.4 4.0 2.6

20 12.8 7.0 3.6 2.4

22 11.5 6.4 3.4 2.2

24 10.4 6.0 3.2

26 9.3 5.7 3.0

28 8.4 5.4 2.8

30 7.5 5.2 2.6

32 6.8 5.0 2.4

34 6.2 4.7 2.2

36 5.6 4.5 2.1

38 5.2 4.3

40 4.7 4.2

42 4.3 3.9

44 4.0 3.7

46 3.6 3.5

48 3.3 3.2

50 2.9

55 2.3

1�� $�� ..(, �Capacities in metric tons32.3 t counterweight and 15 t carbody counterweight

L – boom length in (m)

62 68 74 83

Radius (m) t t t t

6 16.1

7 15.7 11.1 8.2

8 15.0 10.7 8.0 5.0

9 14.5 9.9 7.6 4.9

10 13.8 9.4 7.2 4.6

12 12.8 8.4 6.6 4.3

14 11.0 7.8 6.2 4.1

16 10.3 7.3 5.8 3.8

18 9.6 6.7 5.5 3.5

20 9.1 6.2 5.1 3.3

22 8.5 5.7 4.8 3.1

24 8.0 5.3 4.6 2.9

26 7.7 4.9 4.3 2.7

28 7.4 4.6 4.1 2.5

30 6.9 4.4 3.9 2.4

32 6.3 4.3 3.7 2.3

34 5.7 4.1 3.5 2.1

36 5.2 3.9 3.3

38 4.7 3.7 3.1

40 4.3 3.4 3.0

42 3.9 3.2 2.9

44 3.5 3.0 2.7

46 3.2 2.8 2.6

48 2.9 2.7 2.5

50 2.6 2.5 2.4

55 2.0

! & $�� "�� ..(,�� $�� (No. 1311.xx / No. 1008.xx)Configuration for L – boom lengths (62 m – 83 m)

Length Amount of boom and luffing jib extensions

Boom foot 5.5 m 1 1 1 1 1 1 1 1

Boom insert 3.0 m 1 1 1 1 1 1 1 1

Boom insert 6.0 m 2 2 2 2 2 2 2 2

Boom insert 12.0 m 2 2 2 2 2 2 2 2

Tapered 12.0 m 1 1 1 1 1 1 1 1

Luffing insert 3.0 m 1 1 1 1



Luffing jib head 5.5 m 1 1 1 1 1 1 1 1

Max. L – boom length (m) 62 65 68 71 74 77 80 83

16 LR 1100

4�� & ��""� #�$ (No. 1008.xx) )/� � ��1�� $�� //� % &'�

�� "�� "�� $�� 5�)� & .��6 – see table 1 on page 127�$ ��"�� "�� #�$ �� 5�.� & ��6

Length Amount of luffing jib extensions

Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 3.0 m 1 1 1 1 1 1 1 1 1

Luffing jib insert 6.0 m 1 1 1 1 1 1 1 1 2 2

Luffing jib insert 12.0 m 1 1 1 1 2 2 2 2 3 3 3 3 3 3

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib length in (m) 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62

Capacities in metric tons with luffing jib (No. 1008.xx) 32.3 t counterweight + 15 t carbody counterweight. Above lift chart is for reference only.For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1100 17

!�"� �� & ��""� #�$ (No. 1008.xx)1�� $�� //�

1�� $�� ) �Jib length (m)

14 23 29 35 44 50 56 62Radius (m) t t t t t t t t

5.9 47.38 39.8 27.99 35.6 26.8 18.9

11 29.3 24.0 17.7 13.313 25.0 20.4 16.4 12.7 7.114 23.2 19.4 15.7 12.4 7.1 5.415 20.7 18.1 15.1 12.2 7.1 5.3 4.116 16.2 16.9 14.5 11.3 7.0 5.2 4.0 2.920 13.5 12.2 10.2 6.5 4.6 3.6 2.624 9.6 9.8 9.0 6.0 4.3 3.4 2.326 9.1 8.6 5.8 4.1 3.2 2.228 8.1 8.2 5.7 4.0 3.1 2.130 6.9 7.8 5.5 3.9 3.1 2.136 5.5 5.1 3.7 2.844 3.9 3.4 2.550 2.9 2.355 2.2

1�� $�� 8 �Jib length in (m)


6.3 33.79 28.9 20.6

10 27.4 19.8 15.111 25.7 18.9 14.7 10.713 22.5 17.4 13.8 10.4 6.614 21.0 16.7 13.4 10.1 6.5 4.816 18.2 15.2 12.6 9.7 6.2 4.6 3.617 14.6 12.4 9.4 6.0 4.5 3.5 2.624 8.5 9.1 8.1 5.3 3.9 3.1 2.126 8.3 7.8 5.2 3.8 3.0 2.028 7.6 7.3 5.1 3.7 2.930 6.8 6.8 5.0 3.6 2.836 5.0 4.7 3.4 2.644 3.9 3.2 2.450 3.0 2.255 2.1

1�� $�� / �Jib length in (m)


6.6 21.69 19.2 14.6

10 18.3 14.2 10.111 17.4 13.5 10.0 8.213 15.6 12.5 9.5 8.0 5.315 14.1 10.2 8.9 7.7 5.2 4.016 13.7 9.7 8.6 7.6 5.1 3.9 3.017 8.3 9.3 8.3 7.3 5.0 3.9 3.0 2.220 8.0 7.4 6.7 4.8 3.7 2.9 2.024 6.3 6.5 6.0 4.5 3.4 2.730 5.0 5.1 4.1 3.2 2.536 4.2 3.6 2.9 2.342 3.0 2.6 2.146 2.6 2.450 2.1

1�� $�� Jib length in (m)


6.1 42.17 39.98 37.1 24.9

10 30.3 22.7 16.911 27.7 21.7 16.3 12.313 23.7 19.5 15.3 11.2 7.214 22.1 18.7 14.7 11.0 7.0 5.215 20.7 17.6 14.2 10.8 6.9 5.0 3.817 15.8 13.4 10.3 6.5 4.8 3.7 2.820 13.5 11.0 9.6 6.1 4.4 3.5 2.524 10.1 9.6 8.7 5.6 4.1 3.2 2.228 8.1 7.9 5.4 3.9 3.0 2.030 7.3 7.5 5.3 3.7 3.036 5.9 5.0 3.5 2.744 4.2 3.3 2.550 3.1 2.355 2.2

1�� $�� , �Jib length in (m)


6.5 24.99 21.6 16.1

10 20.5 15.6 12.511 19.4 14.9 12.2 9.113 17.6 13.8 10.4 8.9 5.814 16.7 13.3 10.2 8.7 5.8 4.316 15.2 12.2 9.4 8.3 5.5 4.2 3.317 9.3 10.4 9.2 8.0 5.4 4.1 3.2 2.320 9.2 8.3 7.4 5.2 3.9 3.0 2.222 8.4 7.9 7.0 5.0 3.7 2.9 2.024 7.2 7.3 6.6 4.8 3.6 2.830 5.5 5.5 4.5 3.3 2.636 4.3 3.9 3.1 2.446 3.1 2.6 2.148 2.550 2.3

1�� $�� .� �Jib length in (m)

14 23 29 35 44Radius (m) t t t t t

6.8 19.19 17.2 13.0

10 16.5 12.8 9.012 14.8 10.4 8.8 7.213 14.1 9.9 8.6 7.1 4.914 13.3 9.4 8.4 7.0 4.815 12.7 9.0 8.1 6.9 4.816 12.5 8.5 7.7 6.8 4.817 7.5 8.0 7.5 6.6 4.724 5.4 5.7 5.3 4.230 4.6 4.6 3.736 3.9 3.338 3.142 2.746 2.3


18 LR 1100

!�"� �� & ��""� #�$ (No. 1008.xx)1�� $�� /��

1�� $�� ) �Jib length in (m)


8.6 35.812 26.0 24.113 24.0 22.4 17.115 20.9 19.5 16.1 12.416 19.5 18.3 15.5 12.218 16.3 14.4 11.2 7.020 14.6 13.2 10.6 6.7 4.822 13.1 12.2 10.1 6.4 4.5 3.624 11.2 10.6 9.6 6.1 4.4 3.4 2.426 9.7 9.9 9.1 5.9 4.2 3.3 2.328 9.3 8.8 5.8 4.1 3.2 2.232 7.1 7.9 5.6 3.9 3.1 2.038 5.7 5.2 3.6 2.846 4.1 3.4 2.550 3.2 2.455 2.3



10.1 26.513 21.0 19.615 18.4 17.2 13.917 16.3 15.3 13.3 9.919 14.7 13.7 12.6 9.5 6.022 11.6 10.9 9.0 5.7 4.224 10.9 10.3 8.7 5.5 4.0 3.226 9.8 9.6 8.4 5.4 3.9 3.1 2.128 8.0 8.8 8.1 5.3 3.8 3.0 2.132 6.9 7.2 5.1 3.6 2.838 5.3 4.9 3.4 2.648 3.5 3.2 2.450 3.2 2.360 2.1


14 23 29 35 44 50 56Radius (m) t t t t t t t

11.2 19.414 17.1 13.216 15.7 12.4 9.918 14.0 11.2 9.4 7.620 12.7 10.1 8.8 7.3 4.922 9.3 8.2 6.9 4.8 3.624 8.5 7.7 6.6 4.6 3.6 2.828 6.6 6.9 6.0 4.4 3.4 2.634 5.0 5.5 4.1 3.2 2.540 4.1 3.8 3.0 2.348 3.3 2.8 2.150 2.7 2.155 2.5



9.4 30.712 24.3 22.514 21.0 19.6 15.716 18.4 17.2 14.8 11.018 16.5 15.4 13.9 10.519 14.6 13.5 10.3 6.520 13.8 13.0 10.1 6.3 4.622 12.6 11.2 9.7 6.1 4.4 3.424 11.5 10.7 9.3 5.8 4.2 3.3 2.326 10.5 9.9 8.9 5.7 4.1 3.2 2.230 8.5 8.2 5.5 3.9 3.0 2.132 7.6 7.7 5.4 3.8 3.038 6.1 5.1 3.6 2.846 4.4 3.3 2.550 3.3 2.455 2.3


14 23 29 35 44 50 56Radius (m) t t t t t t t

10.8 22.414 18.3 14.816 16.2 13.8 11.217 15.3 13.3 10.8 8.520 10.1 11.2 9.8 8.1 5.322 10.6 9.3 7.7 5.2 3.824 9.6 8.8 7.3 5.0 3.7 2.928 7.2 7.8 6.7 4.8 3.5 2.834 5.4 6.1 4.6 3.3 2.638 5.0 4.4 3.2 2.540 4.3 4.3 3.1 2.448 3.5 2.9 2.250 2.9 2.255 2.1


14 23 29 35 44Radius (m) t t t t t

11.5 17.015 14.5 11.016 14.0 10.6 8.718 13.2 9.8 8.3 6.720 12.3 8.9 7.7 6.422 8.1 7.2 6.1 4.528 5.8 6.0 5.3 4.134 4.6 4.8 3.740 3.8 3.542 3.444 3.346 3.248 3.0


LR 1100 19

!�"� �� & ��""� #�$ (No. 1008.xx)1�� $�� ),�



12.8 23.017 17.2 16.220 14.0 13.8 13.122 12.4 11.9 10.426 10.1 9.9 9.5 6.028 9.1 9.0 8.8 5.9 4.132 7.6 7.4 5.6 4.0 3.134 7.0 6.9 5.6 3.9 3.0 2.040 5.4 5.2 3.6 2.848 3.9 3.4 2.650 3.4 ��55 2.9 2.460 2.3


14 23 29 35 44 50 56Radius (m) t t t t t t t

15.9 15.520 12.4 11.522 11.3 10.524 9.6 9.126 8.8 8.4 7.930 7.6 7.1 6.8 5.232 7.0 6.6 6.3 5.2 3.734 6.2 5.8 5.1 3.6 2.836 5.8 5.5 4.9 3.6 2.842 4.5 4.0 3.4 2.650 3.1 2.8 2.455 2.3 2.0


14 23 29 35 44 50 56Radius (m) t t t t t t t

18.3 11.524 8.9 8.226 7.6 7.128 7.0 6.6 5.932 6.0 5.6 5.3 4.034 5.6 5.2 4.9 4.0 3.236 4.9 4.6 3.9 3.1 2.340 4.3 4.0 3.4 3.1 2.346 3.3 2.8 2.5 2.250 2.4 2.1


14 23 29 35 44 50 56Radius (m) t t t t t t t

14.4 18.919 14.3 13.320 13.6 12.722 11.5 11.024 10.5 10.0 9.528 8.8 8.5 8.1 5.630 8.0 7.9 7.5 5.5 3.934 6.7 6.5 5.4 3.8 3.036 6.2 6.0 5.3 3.7 2.942 4.8 4.5 3.5 2.750 3.4 3.2 2.555 2.7 2.460 2.1


14 23 29 35 44 50 56Radius (m) t t t t t t t

17.5 12.922 10.2 9.524 9.4 8.7 8.228 7.4 7.0 6.632 6.4 6.0 5.6 4.734 5.6 5.2 4.6 3.436 5.2 4.9 4.3 3.3 2.538 4.9 4.5 4.0 3.3 2.540 4.3 3.7 3.2 2.544 3.7 3.2 2.9 2.446 3.0 2.7 2.450 2.6 2.4 2.0


14 23 29 35 44Radius (m) t t t t t

19 10.524 8.4 7.726 7.7 7.1 6.228 6.6 5.9 4.932 5.7 5.3 4.7 3.534 5.3 4.9 4.5 3.540 4.0 3.7 3.246 3.0 2.548 2.350 2.2


20 LR 1100

!�"� �� & ��""� #�$ (No. 1008.xx)1�� $�� ,�


14 23 29 35 44 50 56Radius (m) t t t t t t t

17.7 15.422 11.724 10.428 8.5 8.330 7.8 7.6 7.436 5.9 5.8 5.440 5.0 4.7 3.642 4.6 4.4 3.6 2.846 3.8 3.5 2.750 3.2 3.1 2.655 2.6 2.4


14 23 29 35 44 50Radius (m) t t t t t t

22.8 9.228 7.4 6.830 6.436 5.1 4.8 4.440 4.1 3.8 3.242 3.9 3.6 3.044 3.3 2.8 2.548 2.9 2.4 2.150 2.3


14 23 29 35Radius (m) t t t t

26.6 6.232 5.0 4.536 3.9 3.538 3.6 3.340 3.4 3.0 2.744 2.6 2.346 2.4 2.1


14 23 29 35 44 50 56Radius (m) t t t t t t t

20.3 11.924 9.926 8.630 7.2 6.934 6.1 5.9 5.638 5.1 4.9 4.340 4.7 4.5 4.042 4.2 3.8 3.446 3.6 3.3 3.0 2.650 2.9 2.6 2.355 2.2


14 23 29 35 44Radius (m) t t t t t

25.4 7.130 5.932 5.034 4.6 4.238 4.0 3.7 3.340 3.4 3.144 3.0 2.7 2.248 2.350 2.2


14 23 29 35Radius (m) t t t t

27.9 5.332 4.534 3.738 3.2 2.840 3.0 2.6 2.342 2.7 2.4 2.146 2.1


LR 1100 21

!�"� �� & ��""� #�$ (No. 1008.xx)1�� $�� .,�


14 23 29 35 44Radius (m) t t t t t

25.9 8.328 7.634 5.736 5.240 4.342 4.044 3.648 3.155 2.1


14 23Radius (m) t t

34.4 4.036 3.842 2.744 2.5


14 23 29 35Radius (m) t t t t

30.2 5.932 5.538 4.140 3.844 3.146 2.848 2.450 2.3


14 17Radius (m) t t

38.7 2.540 2.442 2.1

22 LR 1100

4�� & ��""� #�$ (No. 1309.xx) )/� � ��1�� $�� //� % &'�

�� "�� "�� $�� 5�)� & .��6 – see table 1 on page 127�$ ��"�� "�� #�$ �� 5�)� & ��(/�6

Length Amount of luffing jib extensions

Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 3.0 m 1 1 1 1 1 1 1 1

Luffing jib insert 6.0 m 1 1 1 1 1 1 1 1 1

Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib length (m) 17 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8


LR 1100 23

!�"� �� & ��""� #�$ (No. 1309.xx)1�� $�� //�


17 22.7 28.7 34.4 46.1 52.1 57.8 66.8Radius (m) t t t t t t t t

6.5 45.78 38.8 35.39 34.7 32.7 27.5

11 28.7 27.3 24.8 21.313 24.4 23.3 22.0 19.2 13.814 22.7 21.7 20.6 18.2 13.3 10.115 21.2 20.3 19.3 17.5 12.9 10.0 8.217 18.7 17.9 17.1 15.7 11.6 9.5 8.0 5.418 17.4 16.9 16.1 15.0 11.3 9.3 7.8 5.419 16.2 16.0 15.3 14.4 11.1 9.0 7.7 5.224 12.1 11.3 11.2 9.1 7.9 6.7 4.830 9.0 8.9 7.6 6.7 5.8 4.436 6.9 6.3 5.7 5.0 4.046 4.5 4.2 3.8 3.250 3.7 3.4 2.855 2.9 2.3



7 30.69 27.4 22.4

10 25.8 21.8 18.811 24.5 21.1 18.0 15.313 21.7 19.2 16.6 14.3 9.815 19.3 17.4 15.2 13.3 9.4 7.816 18.1 16.5 14.6 12.8 9.2 7.6 6.218 16.1 15.0 13.3 11.5 8.6 7.2 5.9 4.319 15.1 14.0 12.6 11.3 8.4 7.0 5.8 4.324 10.3 9.9 9.0 7.2 6.1 5.2 3.930 7.7 7.0 5.9 5.3 4.6 3.536 5.8 4.9 4.4 3.9 3.146 3.7 3.2 2.9 2.248 3.1 2.7 2.150 2.9 2.555 2.2


17 22.7 28.7 34.4 40.4 46.1Radius (m) t t t t t t

7.3 19.39 18.2 15.2

10 17.5 14.6 12.711 16.7 14.0 12.2 10.113 15.0 13.0 11.1 9.6 8.114 14.3 12.6 10.8 9.3 7.8 6.516 12.9 10.5 9.9 8.7 7.3 6.218 10.0 9.6 9.3 8.0 6.9 5.820 8.2 8.8 8.5 7.5 6.4 5.524 7.3 7.2 6.4 5.6 4.930 5.4 5.2 4.7 4.236 4.3 3.9 3.542 3.2 2.948 2.4



6.7 38.37 38.18 35.3 29.9

10 29.6 26.8 22.611 27.1 25.4 21.7 18.413 23.2 22.1 19.7 17.0 11.814 21.6 20.6 18.7 16.3 11.6 9.016 19.0 18.2 17.1 15.0 11.0 8.7 7.218 17.0 16.2 15.3 13.8 10.2 8.4 6.9 4.919 16.2 15.4 14.4 13.3 9.9 8.1 6.8 4.824 11.3 10.5 10.1 8.4 7.2 6.0 4.430 8.1 7.6 6.8 6.1 5.4 4.036 6.2 5.5 5.1 4.6 3.646 4.0 3.6 3.3 2.750 3.2 2.9 2.355 2.5



7.2 22.39 20.3 17.4

10 19.3 16.7 14.111 18.3 15.9 13.6 11.314 15.3 14.0 12.1 10.2 7.315 14.4 13.3 11.4 9.9 7.1 5.816 13.5 12.7 10.9 9.6 6.9 5.7 4.718 12.4 10.3 10.2 8.8 6.4 5.4 4.5 3.319 10.6 9.9 9.7 8.5 6.2 5.2 4.4 3.224 7.9 7.8 7.0 5.4 4.6 3.8 2.830 6.0 5.6 4.5 4.0 3.4 2.436 4.7 3.8 3.4 2.9 2.238 3.6 3.2 2.7 2.046 2.8 2.4 2.048 2.6 2.250 2.1


22.7 25.7 28.7Radius (m) t t t

8.6 13.510 13.0 10.3 11.011 12.5 10.1 10.812 12.2 9.7 10.513 11.0 9.4 10.014 10.5 8.9 9.716 9.6 8.1 8.918 8.9 7.2 8.320 8.3 6.5 7.722 7.7 6.1 7.324 6.9 5.8 6.626 5.6 6.028 5.4 5.630 5.3


24 LR 1100

!�"� �� & ��""� #�$ (No. 1309.xx)1�� $�� /��



9.5 31.812 25.4 24.213 23.5 22.4 21.315 20.4 19.5 18.6 17.718 16.9 16.2 15.5 14.8 12.720 14.7 14.6 13.9 13.3 11.8 9.122 13.1 12.6 12.1 11.0 8.8 7.426 10.6 10.5 10.1 9.2 8.1 6.9 4.832 7.9 7.8 7.2 6.8 6.2 4.436 6.6 6.2 5.8 5.4 4.348 4.0 3.8 3.5 3.050 3.5 3.3 2.855 2.7 2.360 2.2



11 24.012 22.113 20.5 19.615 17.9 17.1 16.320 13.6 13.0 12.3 11.8 9.422 12.4 11.8 11.2 10.7 9.0 7.124 10.8 10.2 9.8 8.5 6.9 5.626 9.9 9.4 9.0 8.0 6.7 5.5 4.032 7.5 7.1 6.3 5.9 5.2 3.838 5.8 5.0 4.7 4.3 3.550 3.3 3.0 2.7 2.255 2.6 2.3


17 22.7 28.7 34.4 40.4 46.1Radius (m) t t t t t t

12.1 17.614 16.3 13.916 15.0 12.9 10.818 13.6 11.6 10.1 8.719 12.9 11.1 9.7 8.4 6.922 10.5 9.9 8.8 7.6 6.4 5.528 7.7 7.5 6.5 5.6 4.934 6.1 5.7 5.0 4.440 4.5 4.4 3.846 3.7 3.350 3.0



10.2 27.511 25.712 23.7 22.614 20.5 19.5 18.616 18.0 17.2 16.4 15.719 15.2 14.5 13.8 13.2 11.022 12.5 11.9 11.4 10.3 8.024 11.5 10.9 10.4 9.4 7.7 6.526 10.4 10.0 9.5 8.6 7.5 6.3 4.432 7.8 7.6 6.8 6.3 5.8 4.138 6.0 5.4 5.0 4.7 3.848 3.9 3.6 3.2 2.755 2.8 2.5 2.060 2.1



11.7 20.314 17.9 15.916 15.8 14.7 12.617 14.9 14.1 12.2 10.122 11.4 11.1 9.9 8.7 6.3 5.224 10.1 9.3 8.2 6.0 5.1 4.228 8.1 8.2 7.5 5.5 4.7 4.0 2.934 6.4 6.2 5.0 4.3 3.6 2.638 5.4 4.5 4.0 3.4 2.548 3.3 3.0 2.6 2.050 3.1 2.8 2.455 2.3


22.7 25.7 28.7Radius (m) t t t

14.1 12.115 11.4 10.216 11.0 10.0 9.418 10.1 9.2 8.920 9.4 8.6 8.222 8.8 7.9 7.724 8.3 7.5 7.226 7.8 7.3 6.928 7.2 7.1 6.732 5.7 6.134 5.6


LR 1100 25

!�"� �� & ��""� #�$ (No. 1309.xx)1�� $�� ),�



14.1 20.417 16.9 16.219 15.0 14.4 13.722 12.4 12.3 11.8 11.328 9.0 8.9 8.6 7.730 8.1 8.0 7.1 6.732 7.4 7.3 6.6 6.2 5.834 6.8 6.7 6.1 5.7 5.336 6.2 5.7 5.3 4.9 4.340 5.3 4.9 4.5 4.2 3.644 4.2 3.9 3.6 3.148 3.6 3.4 3.1 2.650 3.3 3.2 2.9 2.355 2.6 2.4



17.2 14.020 12.0 11.424 9.9 9.5 8.926 9.1 8.7 8.2 7.730 7.4 6.9 6.5 5.732 6.4 6.1 5.2 4.736 5.6 5.2 4.5 4.1 3.740 4.6 3.8 3.5 3.1 2.542 4.3 3.6 3.2 2.8 2.344 3.3 2.9 2.6 2.148 2.8 2.5 2.250 2.6 2.3


17 22.7 28.7 34.4 40.4 46.1Radius (m) t t t t t t

19.5 10.422 9.3 8.726 7.8 7.4 6.928 7.2 6.8 6.3 5.930 6.3 5.8 5.4 5.032 5.8 5.4 5.0 4.6 4.234 5.4 5.0 4.6 4.2 3.940 4.1 3.7 3.3 3.044 3.2 2.9 2.548 2.5 2.150 2.3



15.6 16.919 13.9 13.222 11.9 11.4 10.824 10.7 10.4 9.8 9.428 8.7 8.3 7.9 6.930 7.9 7.7 7.3 6.432 7.1 6.7 5.9 5.534 6.5 6.3 5.5 5.1 4.736 6.0 5.8 5.1 4.7 4.338 5.4 4.7 4.3 4.0 3.440 5.0 4.4 4.0 3.7 3.148 3.3 3.0 2.6 2.150 3.1 2.7 2.455 2.3


17 22.7 28.7 34.4 46.1 52.1 57.8Radius (m) t t t t t t t

18.7 11.422 9.9 9.424 9.0 8.5 8.026 8.3 7.8 7.328 7.2 6.7 6.332 6.2 5.8 5.4 4.634 5.4 5.0 4.2 3.836 5.0 4.6 3.9 3.5 3.138 4.7 4.3 3.6 3.2 2.844 3.5 2.8 2.4 2.148 2.4 2.050 2.2


22.7 25.7 28.7Radius (m) t t t

22.7 7.924 7.6 7.126 6.9 6.7 6.428 6.4 6.1 5.930 5.9 5.7 5.432 5.5 5.2 5.034 5.1 4.9 4.736 4.5 4.338 4.040 3.8


26 LR 1100

!�"� �� & ��""� #�$ (No. 1309.xx)1�� $�� ,�



19.5 13.524 10.4 10.326 9.3 9.328 8.4 8.230 7.6 7.5 7.236 5.8 5.638 5.2 4.640 4.8 4.3 3.942 4.4 4.0 3.644 3.7 3.4 3.048 3.2 2.9 2.6 2.050 2.9 2.7 2.455 2.2


17 22.7 28.7 34.4 46.1Radius (m) t t t t t

24.5 8.128 7.1 6.630 6.5 6.132 5.7 5.236 4.9 4.5 4.142 3.6 3.3 2.644 3.1 2.446 2.9 2.248 2.7


17 22.7 28.7 34.4Radius (m) t t t t

28.3 5.332 4.7 4.334 4.3 4.036 3.7 3.240 3.1 2.8 2.444 2.3 2.046 2.1


17 22.7 28.7 34.4 46.1 52.1 57.8Radius (m) t t t t t t t

22 10.526 8.7 8.428 7.9 7.730 7.1 6.734 5.9 5.7 5.438 4.9 4.640 4.3 3.642 4.0 3.344 3.7 3.1 2.746 2.8 2.5 2.148 2.6 2.350 2.4 2.155 2.0


17 22.7 28.7 34.4Radius (m) t t t t

27.1 6.232 5.1 4.834 4.4 4.038 3.8 3.4 3.040 3.2 2.842 2.9 2.644 2.7 2.446 2.248 2.0


22.7 25.7 28.7Radius (m) t t t

32.9 3.634 3.536 3.2 3.038 2.9 2.7 2.540 2.7 2.5 2.342 2.3 2.144 2.1

LR 1100 27


!�"� �� & ��""� #�$ (No. 1309.xx)1�� $�� .,�


17 22.7 28.7 34.4Radius (m) t t t t

28.4 7.130 6.734 5.536 5.038 4.442 3.844 3.346 3.1


17 22.7Radius (m) t t

36.9 3.338 3.242 2.544 2.3


17 22.7 28.7 34.4Radius (m) t t t t

32.6 5.034 4.838 3.940 3.644 2.846 2.648 2.2

28 LR 1100

4�� & "�� #�$ (No. 0806.xx)�,� �� *�1�� $�� //� & �*�

�� "�� "�� $�� 5�*� & ,��6 – see table 1 on page 12'�� #�$ ��"�� "�� "�� #�$ �� 5�� & ��6

Length Amount of fixed jib extensions

Fixed jib foot 5.5 m 1 1 1 1 1 1 1 1

Fixed jib insert 3.0 m 1 1 1 1

Fixed jib insert 6.0 m 1 1 2 2 3 3

Fixed jib head 5.5 m 1 1 1 1 1 1 1 1

Fixed jib length (m) 11 14 17 20 23 26 29 32

Capacities in metric tons with fixed jib (No. 0806.xx) 32.3 t counterweight + 15 t carbody counterweight. Above lift chart is for reference only.For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1100 29

!�"� �� & "�� #�$ (No. 0806.xx)�""�� ,�

1�� $��*�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

4.8 24.09 23.0 12.6

11 21.6 10.9 6.914 19.8 9.9 6.3 4.116 18.7 9.3 6.0 3.918 16.0 8.8 5.7 3.720 13.9 8.3 5.4 3.622 12.2 7.9 5.1 3.524 10.9 7.6 4.9 3.326 9.7 7.2 4.7 3.228 8.7 7.0 4.5 3.130 7.9 6.7 4.3 3.038 5.8 3.8 2.744 3.7 2.550 2.5

1�� $��/�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

5.5 20.59 19.0 9.8

12 17.3 9.3 6.014 16.3 8.9 5.8 3.816 15.4 8.5 5.6 3.720 12.4 7.8 5.1 3.524 10.0 7.3 4.7 3.228 8.0 6.7 4.4 3.132 6.4 6.2 4.2 2.936 5.2 5.7 3.9 2.840 4.2 4.7 3.7 2.644 3.5 3.9 3.6 2.550 2.9 3.1 2.455 2.4 2.360 2.0

1�� $��,��Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

6 13.411 11.6 7.412 11.4 7.3 5.015 10.5 6.9 4.8 3.418 9.6 6.5 4.6 3.322 8.6 5.9 4.3 3.126 7.6 5.4 4.1 2.930 6.1 5.0 3.8 2.834 4.9 4.5 3.6 2.638 4.0 4.2 3.4 2.540 3.5 3.8 3.3 2.542 3.2 3.5 3.2 2.444 2.8 3.1 3.1 2.446 2.5 2.8 2.9 2.348 2.2 2.5 2.6 2.350 2.2 2.4 2.2

1�� $��Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

5.1 24.09 22.3 12.111 21.1 10.6 6.714 19.2 9.7 6.2 4.016 17.8 9.2 5.9 3.918 15.6 8.8 5.6 3.720 13.6 8.3 5.3 3.622 12.0 7.9 5.1 3.524 10.6 7.6 4.9 3.326 9.4 7.3 4.7 3.230 7.6 6.7 4.4 3.034 6.2 6.4 4.1 2.944 4.3 3.6 2.550 3.5 2.455 2.4

1�� $��..�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

5.7 17.410 15.7 8.811 15.3 8.712 14.9 8.5 5.613 14.5 8.4 5.614 14.1 8.2 5.5 3.718 12.6 7.6 5.1 3.522 10.5 7.0 4.7 3.326 8.5 6.4 4.4 3.130 6.9 5.9 4.1 2.934 5.6 5.4 3.9 2.838 4.5 4.9 3.7 2.642 3.6 4.0 3.6 2.546 2.9 3.3 3.4 2.450 2.3 2.7 2.9 2.355 2.0 2.2 2.3


11 14 20 23Radius (m) t t t t

6.1 10.68 10.6 9.1

10 10.3 9.1 6.611 10.0 8.9 6.6 5.612 9.8 8.7 6.5 5.514 9.2 8.2 6.3 5.418 8.1 7.3 5.8 5.122 7.2 6.5 5.2 4.726 6.3 5.8 4.8 4.330 5.6 5.1 4.3 4.034 4.7 4.6 3.9 3.638 3.8 3.9 3.6 3.342 3.0 3.1 3.2 3.046 2.3 2.4 2.6 2.748 2.0 2.1 2.3 2.450 2.1 2.2


11 20 26 32Radius (m) t t t t

5.3 22.89 20.7 10.4

12 19.1 9.8 6.314 18.0 9.3 6.0 3.916 16.9 8.9 5.7 3.818 14.9 8.5 5.5 3.720 13.2 8.1 5.2 3.522 11.8 7.8 5.0 3.426 9.2 7.2 4.6 3.232 6.7 6.4 4.2 2.936 5.5 5.9 4.0 2.840 4.5 4.9 3.8 2.648 3.4 3.5 2.555 2.7 2.460 2.3

1�� $��,*�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

5.9 14.710 13.4 8.012 12.6 7.8 5.215 11.1 7.3 5.0 3.516 10.8 7.1 4.9 3.418 10.1 6.8 4.8 3.322 9.0 6.2 4.5 3.126 7.8 5.7 4.2 3.030 6.4 5.2 4.0 2.834 5.2 4.7 3.7 2.738 4.2 4.2 3.5 2.542 3.4 3.7 3.2 2.546 2.6 3.0 3.0 2.448 2.3 2.7 2.8 2.350 2.0 2.4 2.6 2.355 2.0

Capacities in metric tons with fixed jib (No. 0806.xx) 32.3 t counterweight + 15 t carbody counterweight. Above lift chart is for reference only.For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

30 LR 1100

!�"� �� & "�� #�$ (No. 0806.xx)�""�� *�

1�� $��*�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

7.5 21.713 19.0 9.017 16.7 8.2 5.222 12.4 7.4 4.7 3.224 11.0 7.0 4.5 3.126 9.8 6.8 4.4 3.028 8.8 6.6 4.2 3.030 7.9 6.4 4.1 2.934 6.2 3.9 2.736 6.1 3.8 2.738 5.9 3.8 2.642 3.7 2.544 3.7 2.548 2.550 2.6

1�� $��/�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

8.1 17.114 14.9 7.818 13.4 7.4 4.722 11.5 6.9 4.5 3.126 9.3 6.4 4.3 2.930 7.4 5.9 4.1 2.834 6.0 5.5 3.9 2.736 5.4 5.4 3.8 2.738 4.8 5.2 3.7 2.640 4.4 4.9 3.7 2.642 3.9 4.5 3.6 2.544 3.5 4.1 3.5 2.546 3.2 3.7 3.5 2.455 2.3 2.6 2.460 2.2


11 20 26 32Radius (m) t t t t

8.6 10.715 9.5 6.018 8.8 5.8 4.122 7.9 5.4 4.0 2.826 7.1 4.9 3.9 2.730 6.4 4.6 3.6 2.634 5.2 4.2 3.4 2.538 4.2 3.9 3.2 2.440 3.7 3.8 3.1 2.442 3.3 3.6 3.0 2.444 3.0 3.4 2.9 2.346 2.6 3.1 2.8 2.348 2.3 2.7 2.8 2.250 2.0 2.4 2.7 2.255 2.0 2.1


11 20 26 32Radius (m) t t t t

7.7 20.614 18.1 8.617 16.7 8.1 5.122 12.2 7.3 4.7 3.224 10.8 7.1 4.5 3.126 9.6 6.8 4.4 3.028 8.6 6.6 4.3 2.930 7.8 6.5 4.1 2.932 7.0 6.3 4.0 2.834 6.3 6.2 3.9 2.738 5.8 3.8 2.644 4.4 3.6 2.548 3.5 2.550 3.4 2.555 2.6

1�� $��..�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

8.3 14.614 12.7 7.218 11.2 6.9 4.522 10.1 6.3 4.3 3.026 8.8 5.9 4.1 2.930 7.1 5.5 3.9 2.834 5.8 5.1 3.8 2.638 4.7 4.7 3.6 2.642 3.8 4.3 3.4 2.544 3.4 3.9 3.4 2.446 3.0 3.5 3.3 2.448 2.7 3.2 3.2 2.450 2.4 2.8 3.1 2.455 2.1 2.4 2.360 2.0


11 14 20 23Radius (m) t t t t

8.7 9.111 9.0 7.615 8.2 7.2 5.317 7.8 6.9 5.3 4.519 7.3 6.6 5.1 4.522 6.7 6.0 4.8 4.326 6.0 5.5 4.4 4.030 5.3 4.9 4.1 3.734 4.8 4.5 3.7 3.438 4.0 4.0 3.4 3.142 3.2 3.3 3.1 2.944 2.8 3.0 3.0 2.846 2.5 2.6 2.8 2.648 2.2 2.3 2.6 2.550 2.0 2.3 2.4


11 20 26 32Radius (m) t t t t

7.9 19.114 16.2 8.317 14.8 7.8 4.922 11.9 7.2 4.6 3.126 9.5 6.6 4.3 3.028 8.5 6.4 4.2 2.930 7.6 6.2 4.1 2.932 6.8 5.9 4.0 2.834 6.2 5.7 3.9 2.736 5.6 5.5 3.8 2.738 5.1 5.4 3.8 2.640 4.6 5.1 3.7 2.650 3.2 3.5 2.455 2.7 2.560 2.3

1�� $��,*�Fixed jib length in (m)

11 20 26 32Radius (m) t t t t

8.5 12.114 10.6 6.418 9.4 6.1 4.322 8.4 5.6 4.1 2.926 7.4 5.2 3.9 2.830 6.6 4.8 3.7 2.734 5.4 4.4 3.5 2.638 4.4 4.0 3.3 2.540 3.9 3.9 3.2 2.442 3.5 3.7 3.1 2.444 3.1 3.5 3.0 2.346 2.8 3.3 2.9 2.348 2.4 2.9 2.8 2.350 2.1 2.6 2.7 2.255 2.2 2.1

2��

LR 1100 31

��

�� !"# ��$�% "��"�#

&� !"# ��$�% "��"%%

'��(��'��)��*+��',

(((��*+��',

LR 1

100

– 89

00 5

35 1

4 –

03/2

007

Sub

ject

to c

hang

e w

ithou

t not

ice.

crawler crane experts in the uk & europe | delden cranes · ˇ˘˘ ˘ ˛ ˘ lr 1100 9 max....

Documents