creative 2.0 peacock quilt - pfaff · creative™ 2.0 peacock quilt 1 creative™ 2.0 peacock quilt...

creative™ 2.0 Peacock Quilt 1

creative™ 2.0 Peacock QuiltApproximate size 34" x 60" (86 cm x 154 cm)

Sewing Supplies2/3 yds x 44" (60 x 110 cm wide) blue tone on ytone batik

2/3 yds x 44" (60 x 110 cm) floral blue batik y

½ yd x 60" (40 x 160 cm) purple/pink silk y

½ yd x 60" (40 x 160 cm) dark purple/blue silk y

½ yd x 44" (50 x 110 cm) blue silk (tail, border and tabs) y

½ yd x 44" (40 x 110 cm) turquoise cotton y

14" x 16" (35 x 40 cm) floral orange cotton y(peacock body)

8" x 14" (20 x 35 cm) yellow cotton (wing) y

14" x 16" (35 x 40 cm) pink silk (beak and legs) y

2 1/8 yds x 60" (2.0 m x 160 cm) blue batik y(backing and binding)

1 ¼ yds x 60" (1.0 m x 160 cm) quilt cotton batting y

1 ¼ yds x 55" (1.0 m x 140 cm) polyester batting y(for Trapunto)

2 yds x 1 ¾" (2.0 m x 4 cm) ribbon with floral ypattern (for woven border)

Fusible interfacing y

Fusible webbing y

Tear away stabilizer y

Solvy water soluble stabilizer y

Water soluble marker y

Yellow roving (for peacock crown) y

Rayon Embroidery thread 40 and 30 weight y

Metallic thread y

Sewing thread y

Bobbin thread y

Monofilament thread y

Olfa 45 mm Deluxe Rotary Cutter y

Omnigrid Ruler 8 ½" x 24" y

Olfa Rotary Cutting Mat y

Safety Pins y

Embroidery Needle Size 90 y

Glass beads y

Ribbon floss y

Large eye needle for beading y


Pfaff® accessories

Sewing Star Foot 820654-096 y¼ inch Right Guide Foot with IDT™ 820541-096 yor Clear ¼" Quilting foot 820833-096Clear Stitch-in-Ditch Foot 820882-096 yor Stitch-in-Ditch Foot with IDT™ 820542-096Open-Toe Appliqué Foot, 9 mm with IDT™ y 820213-096Embroidery/Sensormatic Free-motion Foot y 820671-096creative™ Master Hoop 412 96 85-02 yPFAFF y ® Hobby™ 350P Punching machine (for felting)

You will find these and many other accessories in our PFAFF® Accessory User’s Guide, on web site www.pfaff.com, and for purchase at your nearest Authorized PFAFF® Dealer.

Cutting Instructions¼" (6 mm) seam allowance included in all

measurements.

Blue tone on tone batik 6 pieces 3 ¼ y " x 43" (8,2 x 110 cm)

floral blue batik6 pieces 3 ¼ y " x 43" (8,2 x 110 cm)

Purple/pink silk 2 y pieces 3 ¼" x 43" (8,2 x 110 cm)3 y pieces 6" x 7" (15 x 18 cm) Tabs

Dark purple/blue silk 2 y pieces 3 ¼" x 43" (8,2 x 110 cm)1 pieces 6 y " x 43" (15.2 x 110 cm)

Turquoise cotton fabric 2 y pieces 3 ¾" x 43" (9,2 x 110 cm)2 pieces 3 ¼ y " x 43" (8,2 x 110 cm)

Blue silk fabric 2 y pieces 3 ¼" x 43" (8,2 x 110 cm) 2 y pieces 6" x 7" (15 x 18 cm) TabsRemaining is used for the tail y

Polyester Batting 3 pieces 10 y " x 34" (25 x 85 cm) for trapunto

Blue batik 5 pieces 3 y " x 43" (7.5 x 110 cm) binding1 pieces 39 y " x 60" (100 x 160 cm) backing

Cotton Batting 39 y " x 60" (100 x 160 cm)

assembly Instructions:1. Thread your PFAFF® sewing machine with sewing

thread on top and in the bobbin. Snap on the ¼" Right Guide Foot or Clear ¼" Quilting foot and engage IDT™.

2. Select a straight stitch, length 2.5 mm.

3. Sew together in long rows the 6 – 3 ¼" x 43" (8,2 x 110 cm) blue tone on tone batik strips and the 6 floral blue batik strips using a ¼" (6 mm) seam allowance. Create strata alternating the fabrics. Press the seams towards the floral blue batik.

4. Sub-cut the strata into 4 – 10" (25.5 cm) widths.

5. Sew together in long rows the 2 – 3 ¼" x 43" (8,2 x 110 cm) purple/pink silk strips and the 2 dark purple/blue silk strips using a ¼" (6 mm) seam allowance. Create strata alternating the fabrics. Press the seams towards the dark purple/blue silk.

6. Sub-cut the strata into 9 – 3 ¾" (9.2 cm) widths.

7. Layout the strips into groups of 3, being sure to alternate the colors. Sew together to create 3 rows each with 12 squares. Press the seams towards the dark purple/blue silk. illu 1 illu 2

illu 3 illu 4

illu 5


8. Layout blue tone on tone batik and floral blue batik stratas and the purple/pink silk and dark purple/blue silk as illustrated and sew together.

9. Set up for embroidery: attach the embroidery unit and the Embroidery/Sensormatic Free-motion Foot. Thread your machine with 30 weight rayon embroidery thread on top and bobbin thread in the bottom.

10. Select the illustrated quilt design on your PFAFF® creative™ 2.0 sewing and embroidery machine.

11. For trapunto effect place the polyester batting strip under the silk pieced rows. Hoop your quilt top and batting in the creative™ master hoop, be sure to center the design in the middle of silk rows.

12. Continue embroidering until you have embroidered each row.

13. Trim the excess batting on the back of the quilt as illustrated.

14. Remove the embroidery unit and foot. Thread your PFAFF® sewing machine with sewing thread on top and in the bobbin. Snap on the ¼" Right Guide Foot or Clear ¼" Quilting foot and engage IDT™.

15. Select a straight stitch, length 2.5 mm.16. To create the woven border, fold the 6" x 43"

(15.2 x 110 cm) dark purple/blue silk strip in half and sew a ¼" seam along the long side of the strip.

17. Sub-cut into 12 – 3 ¾" (9.2 cm) pieces. Turn 10 of them right side out.

illu 1 illu 2

illu 3 illu 4

illu 5

illu 1 illu 2

illu 3 illu 4

illu 5

illu 1 illu 2

illu 3 illu 4

illu 5

illu 6 illu 7 illu 8


illu 12

illu 1 illu 2

illu 3 illu 4

illu 5


18. Layout the pieces on the quilt as illustrated and pin in place. Put the piece that was not turned right side out in the bottom position, since it will be stitched into the bottom edge.

19. Place the 3 ¾" x 43" (9.2 x 110 cm) turquoise strip on top of the quilt as illustrated and sew together. Press towards the turquoise strip. Repeat for the other side of the quilt.

20. Cut the ribbon with floral pattern in half and place on top of the turquoise strip. Snap on the Open-Toe Appliqué Foot, 9 mm with IDT™ and bartack in place under the sections that will be covered with the dark purple/blue silk pieces.

21. Snap on the ¼" Right Guide Foot or Clear ¼" Quilting foot and engage IDT™. Select a straight stitch, length 2.5 mm.

22. Sew together in long rows the 2 – 3 ¼" x 43" (8,2 x 110 cm) turquoise cotton strips and the blue silk strips using a ¼" (6 mm) seam allowance. Create strata alternating the fabrics. Press the seams towards the blue silk.

23. Sub-cut the strata into 9 – 3 ¾" (9 cm) widths.

24. Layout the strips into groups of 2 being sure to alternate the colors. Sew together to create 2rows as illustrated. Press the seams towards the blue silk.

25. Sew onto the quilt as illustrated.

26. Trace the mirror image of the peacock body, tail, beak and legs onto the paper side of the fusible webbing. Cut out roughly.



illu 12



illu 12



illu 12



illu 12



illu 12


27. Fuse traced appliqué pieces onto the wrong side of the following fabrics:

Body - floral orange cotton Tail – blue silk Beak and legs – pink silk

28. Cut out all the appliqué pieces.

29. Place on the quilt top as illustrated and fuse in place.

30. Snap on the Sewing Star foot with IDT™ engaged, place tear away stabilizer under the quilt. Thread your machine with 40 weight rayon thread on top and bobbin thread in the bottom. Choose a satin appliqué stitch and sew around all the pieces. Remove the tear away stabilizer and press.

31. Set up for embroidery: attach the embroidery unit and the Embroidery/Sensormatic Free-motion Foot. Thread your machine with 40 weight rayon embroidery thread on top and bobbin thread in the bottom.

32. Plan out the embroideries for the peacock tail, by printing 7 full size copies of the peacock feather design. Place them on the quilt top and mark the position of each with a water soluble marker.

33. Select the peacock feather design. Hoop tear away stabilizer and quilt and embroider. Remove the tear away stabilizer. Continue to embroider all 7 feathers.

34. Use the water soluble marker to trace the wing template onto the right side of the yellow cotton. Draw a line from the top to the bottom of the wing.

35. Toggle back to sewing mode. Snap on the Sewing Star foot with IDT™ engaged, place tear away stabilizer under the wing fabric. Thread your machine with 40 weight rayon thread on top and bobbin thread in the bottom. Choose a 9 mm decorative stitch and sew on the line. Fill the entire wing spacing a foot width between the stitches. Remove the tear away stabilizer and press.

36. Press fusible webbing to the wrong side of the wing fabric. Cut out the wing and fuse in place on the peacock body.

37. Place stabilizer under the quilt and satin stitch around the wing.

38. Trace the peacock crown onto the water soluble stabilizer with the water soluble marker. Pin in place on the quilt top. Place stabilizer under the quilt.

39. Satin stitch the lines on the crown.

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18



illu 12

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18


illu 20

40. With the Hobby™ 350P punching machine, needle punch the yellow wool roving in place at the end of the peacock crown.

41. Snap on the Embroidery/Sensormatic Free-motion Foot and set the machine for free motion zig zag. Embellish the beak and legs.

42. Center the batting on top side of the backing. Lay the quilt top right side up on top of the batting.

43. Baste with safety pins approximately every 4" (10 cm) all over the quilt, making sure that all the layers are flat.

44. Start quilting from the center and work your way out to the edges. Snap on the Stitch in the Ditch foot and engage IDT™, thread the top and bobbin of the sewing machine with invisible thread. Stitch in the ditch between the rows letting the center guide of the presser foot ride in the ditch. Remove the safety pins when you get to them.

45. Change the foot to a regular sewing foot 0A, engage IDT™ and set your PFAFF® sewing machine to a 3 step zig zag with a stitch width of 4.5 mm. Sew around the outside edges of the quilt.

46. Use a rotary cutter and trim the excess batting and backing.

47. Fuse fusible interfacing onto the wrong side of the 6" x 7" (15 x 18 cm) tabs of blue silk and purple/pink silk.

48. Snap on the ¼" Right Guide Foot with IDT™ or Clear ¼" Quilting foot and engage IDT™. Select a straight stitch, length 2.5 mm.

49. Fold right sides together and in half sew along the 6" (15 cm) edge to create the tabs. Turn right side out.

50. Fold the tabs in half with raw edges together. Pin them on the quilt top as illustrated.

51. Join the 3" (7.5 cm) wide binding strips together with mitered corners to make one long strip.

52. Trim to a ¼" (6 mm) seam allowance and press open. Fold the strip in half lengthwise with wrong sides together and press.

53. Starting on the right side of the quilt; sew the raw edge of the binding to the raw edge of the quilt. Sew around all sides mitering each corner.

54. Fold the binding to the wrong side of the quilt and stitch in place from the right side with the Stitch-in-Ditch Foot.

55. Attach the glass beads to the bottom of the quilt by threading the beads onto ribbon floss. Thread the ribbon floss through the beads and place a small bead at the end and then thread back through the beads.

55. Sew onto the quilt with two rows of straight stitch.

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

illu 20

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

illu 20

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

illu 20

illu 19

illu 13illu 14

illu 15

illu 16

illu 17illu 18

finished!


position body


position body

A


position body

A

B

C


position body

B

C


position body

C

B


C

B

E

position body

F


position body

E

F


position legs

position wing

position crown

body


Peacock crow

n


legs

beak


positionbody


legs

beak


wing

creative 2.0 peacock quilt - pfaff · creative™ 2.0 peacock quilt 1 creative™ 2.0 peacock quilt...

Documents