cr/tr rotary combine inspection - new holland … · cr/tr rotary combine inspection pm-14366 ......
TRANSCRIPT
W.O. # _____________________________________________DATE _______________________________________________MODEL ____________________________________________TECHNICIAN SIGNATURE ______________________________P.I.N. _________________________ HOURS ______________
CUSTOMER NAME ____________________________________ ADDRESS ___________________________________________CITY, STATE, ZIP _____________________________________PHONE _____________________________________________CUSTOMER SIGNATURE _______________________________
CR/TR ROTARY COMBINE INSPECTION
PM-14366Rev 3/09
NEW HOLLAND MAINTENANCE INSPECTION CHECKLISTITEM # COMMENTS
Safety equipment1. Seat Belt2. ROPs3. Warning/Flashers, turn signals, beacons4. Decals, SMV5. Horn, back-up alarm (CR only)6. Brake pedal interlock7. Feeder lift safety lock8. All shields in place9. Reflectors10. Mirrors
feeder HouSing11. Feeder drum, stops, pivots, bearings,
& seal12. Feeder chain, slats, and links13. Feeder chain tension14. Upper sprockets, strippers and bearings15. Slip clutch condition and adjustment16. Feeder drive belt/pulleys & chain/sprockets17. Header jackshaft belt, pulley &
bearings18. Feeder housing floor condition19. Feeder door seal20. Feeder reverser condition/operation21. Stone ejector chain and sprockets22. Stone ejector drum, bearings,
and chains23. Stone ejector trap door operation/adjustment24. Stone ejector warning operation
rotor aSSembly25. Front bearings and infeed castings26. Rotor auger wear lugs27. Straight rasp bars28. Rear rotor area fins29. Thresher clutch adjustment30. Torque sensing unit and rotor belt31. Rotor speed adjuster (motor/cylinder)32. Rotor drive coupler chain &
sprocket condition33. Rotor gearbox coupler sprocket &
chain condition
rotor Cage, ConCaveS, & grateS34. Concaves/grates – damage35. Concave clearance/adjustment36. Rotor covers – cracks, distortion, wear37. Separator grates – damage-wear
CHaffer and SHoe SieveS38. Cracks/warpage/misalignment39. Hanger bushings40. Shaker drive bearings, belts
and pulleys41. Front and side seals42. Grain pan condition
Cleaning fan43. Drive belts, pulleys and bearings44. Fan blades – cracked45. Drive pulley – wear, not loose46. Variable hub (clean) and thrust bearing
diSCHarge beater47. Drive belt, pulleys & tensioner48. Hubs, shaft, and bearings49. Grate-cracks, wear, and pan
adjustment
grain/tailingS augerS/elevatorS50. Clean grain auger trough – damage51. Auger flights – cracks, bending52. Shoe drive gearboxes, shafts, belts
& couplers53. Clean grain elevator chain, paddles
& sprockets54. Clean grain elevator bearings, drive
chain, and drive sprockets55. Clean grain elevator head & boot condition56. Tailings return elevator flights,
sprockets, paddles, and chain adjustment
57. Tailings return elevator bearings58. Tailings return elevator head59. Tailings return upper auger and tube60. Tailings return elevator jackshaft
drive belt61. Tailings elevator drive chain62. Locking collars, drive hubs and
setscrews63. Slip clutch – wear and adjustment64. Bubble-up auger and tube condition
grain tank and unloading SyStem65. Unloading drive sprockets/belts/
chains/bearings66. 45° gear box bearings, couplers
and gears67. Augers, flighting and bearings68. Pivot movement and wear69. Grain tank – leaks
Straw Spreader/CHopper, CHaff Spreader70. Worn/missing spreader bats
and paddles71. Drive belt, pulleys & tensioner72. Drive shaft – bevel gears, wear/mesh73. Drive shaft bearings74. Hub, shaft and bearings75. Chopper knife and hardware
condition76. Stationary knives broken77. Chopper spreadboard and fin
condition78. Chopper infeed roll condition
A B C S A B C S A B C S A B C S
A CrITICAL – MuST rEPAIr
B OPErATIONAL – SIgNS Of WEAr
C OK
S PASSED INSPECTION - SErvICE PrOvIDED
This information is only for the purpose of suggesting possible repair or treatment of equipment. Any remedy will be limited to the amount of the inspection fee. Dealer makes no expressed or implied warranties, and disclaims any incidental or consequential damages.
1 of 2
W.O. # _____________________________________________DATE _______________________________________________MODEL ____________________________________________TECHNICIAN SIGNATURE ______________________________P.I.N. _________________________ HOURS ______________
CUSTOMER NAME ____________________________________ ADDRESS ___________________________________________CITY, STATE, ZIP _____________________________________PHONE _____________________________________________CUSTOMER SIGNATURE _______________________________
CR/TR ROTARY COMBINE INSPECTION
PM-14366Rev 3/09
NEW HOLLAND MAINTENANCE INSPECTION CHECKLISTITEM # COMMENTS
engine79. Coolant level, protection
level _______°80. Radiator cap/recovery bottle81. Water pump, bearings, fan condition82. Radiator fan drive bearings condition83. Hoses and connections84. Fuel leaks85. Oil leaks, engine front/rear/head
gasket leaks86. Radiator, oil cooler, A/C condenser,
rotary air screen-clean87. Air leaks, seal at rotary screen door,
radiator & inner vane88. Fuel tank, fuel cap condition,
fuel filter89. Drain fuel system water separator90. High idle/low idle91. Turbo, oil seepage, missing vanes92. Air cleaner, dents, seals, aspirator
obstructions93. Air cleaner outer & inner filter
element94. Air restriction indicator95. Manifold & muffler leaks/cracks96. Belts – wear/tension/alignment97. Damper pulley condition
HydrauliC SyStem98. Leaks: fittings, hoses, rod seals, packings99. Valves for proper operation100. Pump drive belts and hoses101. Pump mounting
HydroStatiC drive102. Propulsion control lever friction
adjustment103. Drive couplings and hoses104. Final drive bolts at axle,
loose/broken105. Final drive axle bearing free play106. Final drive seal condition107. Functional: shifting108. Functional: turn brakes109. Functional: park brake110. Functional: hydrostatic drive111. Functional: rear wheel assist
wHeelS/powered rear axle (pra)112. Rear axle torque hub leaks113. Front/rear tire inflation114. Rear wheel toe-in115. Rear axle pivot wear/cracks116. Wheel bolt torque
eleCtriCal SyStem117. Battery voltage tested ____ volts118. Battery water level (or sealed)119. Battery posts, cables and
clamps/clean
eleCtriCal SyStem (Cont.)120. Charging system tested ____ volts.121. Field and road lights122. All instruments/gauges & warning
indicators123. Neutral start switch & starter
operation124. Heater/air conditioning125. Electric fuel pump126. Error codes (CR only)127. Variable rotor drive speed rpm128. Variable speed cleaning fan rpm129. Header lift/tilt130. Reel lift/fore/aft131. Unloader swing and engage132. Feeder reverser133. Shaft speed monitor134. Grain loss monitor135. Wiring harness condition
lubriCation levelS136. Engine oil137. Transmission oil138. Hydraulic139. Brake fluid140. Final drives141. Hydraulic reverser142. PRA gear case
miSCellaneouS143. External condition144. Operator’s seat145. Radio146. Operator’s manual147. Fire extinguisher (if required)148. Other:_____________________149. Other:_____________________
additional maintenanCe150. Engine valve lash adjustment
(if required)151. Fuel injectors condition/ pop-off pressure152. Lubricate grease points153. Filters: fuel, hydraulic/hydrostatic,
coolant, HVAC154. HVAC system function
fluid analySiS (optional)155. Engine156. Hydraulic oil157. Final drives158. Coolant
A B C S A B C S A B C S A B C S
A CrITICAL – MuST rEPAIr
B OPErATIONAL – SIgNS Of WEAr
C OK
S PASSED INSPECTION - SErvICE PrOvIDED
This information is only for the purpose of suggesting possible repair or treatment of equipment. Any remedy will be limited to the amount of the inspection fee. Dealer makes no expressed or implied warranties, and disclaims any incidental or consequential damages.
2 of 2