The CT Se ries Car tridge Fil ter Hous ings are three-piece,all-metal hous ings with ring-nut clo sures. These hous -ings are de signed to meet gen eral in dus trial fil tra tionneeds. The CT Mod els of fer you a choice in con struc tionma te ri als for wet ted sur faces and are avail able with a316 stain less steel head with 304 stain less steel sump or in all-316 stain less steel in one-high (CT101), two-high(CT102), or three-high (CT103) de signs. Ring nuts forhead to sump seal ing are nickel plated brass to elim i nate po ten tial thread gall ing. A ring nut tight en ing tool is in -cluded. All CT Model heads have tapped mount ingpads; mount ing brack ets are avail able as an ac ces sory.The CT Mod els have liq uid flow rates of up to 26 GPM,and a max i mum op er at ing pres sure and tem per a ture of300 psig at 200°oF. For air and gas ser vice, CT Mod elshave a max i mum op er at ing pres sure and tem per a ture of180 psig at 200°oF.

DE SIGN FEA TURES/BEN E FITSn Rugged, three-piece, all metal construction provides

long service life and quick & easy cartridge changeout.

n Design flexibility: 1, 2 or 3-high cartridge models foruse with 9 ¾, 19 ½”, or 29 ¼” filter cartridges.

n Drilled and tapped mount ing holes: Ready formount ing bracket in stal la tion.

Op tionsn Choice of gas ket ma te ri als.

n Mount ing bracket avail able as ac ces sory equip ment.

OP ER AT ING PA RAM E TERSTa ble 1 lists stan dard model op er ating pa ram e ters for theCT mod els. In Ta ble 1, the max i mum op er at ing pres sureis the rat ing for the hous ing only. Ac tual fil ter op er at ingtem per a ture is de pend ent on the tem per a ture ca pa bil ity ofthe fil ter car tridge.

Ta ble 1 - Op er at ing Pa ram e ters

Max i mum Op er ating Pres sure & Tem per a ture300 psig @ 200°F Liquid

180 psig @ 200°F Air/Gas

Flow Rate (GPM) See Table 2.

CAR TRIDGE RE QUIRE MENTSThe CT101, 102 and 103 Se ries Car tridge Fil ter Hous ingscan use one, two, or three 9 ¾” equiv a lent sin gle-length fil -ter car tridges, re spec tively. The CT102 and 103 Modelscan also use one 19 ½” fil ter car tridge and one 29 ¼” fil tercar tridge, re spec tively. A shorter ver sion of the CT101,that uses a 5” dou ble open end car tridge, is also avail able.

Applicable CUNO Filter CartridgesActivated Carbon Econo-Klean™ PolyNet™

Betafine®D & XL Micro-Klean®III PolyPro®XL

Beta-Klean® Micro-Wynd®II Zetapor®

Betapure® MPF® II Microflour®

Petro-Klean®

FLOW RATESTa ble 2 lists the maxi mum rec om mended flow rates inGal lons Per Min ute (GPM) for the CT101 and 102 Mod els. Use the data on Ta ble 2 only as a guide in es tab lish inghous ing flow ca pa bil ity; do not use it for fil ter siz ing. Onceyou know the flow rate for a se lected car tridge, then useTa ble 2 to check whether the hous ing's flow rates fallwithin the rec om mended guide lines.

When se lect ing a fil ter's size, make sure you con sider theamount of con tam i nant you want re moved as well as theflow re quire ments; this en sures the lon gest pos si ble car -tridge life.

Ta ble 2 - Max i mum Rec om mended Flow Rates (GPM)

In let/ Out -let Wa ter 80 SSU 150 SSU

300SSU

600SSU

1000SSU

3/4" 16 14 13 12 10 8

1" 26 22 20 18 16 13

STAN DARD MODEL SPECIFICATIONSTa ble 3 lists stan dard model ma te ri als of con struc tion andcon nec tion sizes. Ta ble 4 lists di men sions and ship pingweight. All di men sions are nom i nal and can be used forde ter min ing over all space re quire ments. To find a di men -sion, lo cate the model you want in the left col umn of Ta ble 4 and the se lected di men sion sym bol (A through C) in thetop row. Where the col umn and row meet is the model'sdi men sion.

CT SeriesCartridge Filter Housings

®

Cuno Incorporated

Ta ble 4 -Di men sions

Hous ingModel

Cata logNum ber

A B C SHIPPING

WEIGHT(pounds)

(Inches)

CT101

47783-01 11 3/8 12 1/16 3 1/2

647783-03 11 9/16 12 13/32 3 1/2

44152-01 11 9/16 12 9/16 2 15/16

44152-04 11 13/16 12 7/8 3 1/2

CT102

47783-02 21 11/32 22 1/32 3 1/2

7 1/247783-04 21 9/16 22 3/8 3 1/2

44152-02 21 7/16 22 7/16 2 15/16

44152-05 21 9/16 22 5/8 3 1/2

CT10344152-03 31 3/16 32 3/16 2 15/16

944152-06 31 5/16 32 3/8 3 1/2

CT Se ries Or der ing Guide

Housing Model

Cata logNum ber

In let/Out -let NPT

HousingMaterial

Mount ingBracket

KitRing Nut

ToolCT101 47783-01

3/4"316 S.S.

Head and 304 S.S. Sump

withoutVent/Drain 35581-01

(OrderSeparately)

63572-01(included)

CT102 47783-02

CT101 47783-031"

CT102 47783-04

CT101 44152-01

3/4" All 316 S.S.(wetted parts)

withVent/Drain

CT102 44152-02

CT103 44152-03

CT101 44152-04

1"CT102 44152-05

CT103 44152-06

OPTIONAL MOUNTING BRACKET

DRAIN LOCATIONBY PART NUMBERGreen line indicates

B dimensionNO DRAIN47783-0147783-0247783-0347783-04

44152-01

44152-0244152-0344152-0444152-0544152-06

CENTER DRAIN

OFF-SET DRAIN

A

C

B

158

DETAIL

Ta ble 3 - Stan dard Model Con nec tion Sizes and Ma te ri als of Con struc tionModel CT101 CT102 CT101 CT102 CT101 CT102 CT103 CT101 CT102 CT103

Part Number 47783-01 47783-02 47783-03 47783-04 44152-01 44152-02 44152-03 44152-04 44152-05 44152-06

Connection Sizes ¾” NPT 1" NPT ¾” NPT 1” NPT

Materials of Construction

Head 316 S.S.

Head Gasket Nitrile (Optional Gasket material: fluorocarbon, neoprene, or EPR)

Ring Nut Nickel Plated Brass

Sump 304 S.S. 316 S.S.

Centerpost with Seal Plate N/A 304 S.S. N/A 304 S.S. N/A 316 S.S.

Seal Plate (in Sump) 304 S.S. N/A 304 S.S. N/A 316 S.S. N/A

Vent Plug 1/4" - 20 UNC -2A 316 S.S.

Vent Plug Gasket N/A Fiber

Drain Plug - ¼” NPT NA 316 S.S.

Optional Mounting Bracket Zinc Plated Steel (order separately)

Seller war rants its equip ment against de fects in work man ship and ma te rial for a pe riod of 12 months from date of ship ment from the fac tory un der nor mal use and ser -vice and oth er wise when such equip ment is used in ac cor dance with in struc tions fur nished by Seller and for pur poses dis closed in writ ing at the time of pur chase, if any.Any un au tho rized al ter ation or mod i fi ca tion of the equip ment by Buyer will void this war ranty. Seller's li a bil ity un der this war ranty shall be lim ited to the re place ment orre pair, F.O.B. point of man u fac ture, of any de fec tive equip ment or part which, hav ing been re turned to the fac tory, trans por ta tion charges pre paid, has been in spectedand de ter mined by the Seller to be de fec tive. THIS WAR RANTY IS IN LIEU OF ANY OTHER WAR RANTY, EI THER EX PRESSED OR IM PLIED, AS TO DE SCRIP -TION, QUAL ITY, MER CHANT ABIL ITY, FIT NESS FOR ANY PAR TIC U LAR PUR POSE OR USE, OR ANY OTHER MAT TER. Un der no cir cum stances shall Seller beli a ble to Buyer or any third party for any loss of prof its or other di rect or in di rect costs, ex penses, losses or con se quen tial dam ages aris ing out of or as a re sult of anyde fects in or fail ure of its prod ucts or any part or parts thereof or aris ing out of or as a re sult of parts or com po nents in cor po rated in Seller's equip ment but not sup pliedby the Seller.

WAR RANTY

Fluid Purification

Cuno Incorporated400 Research Parkway

Meriden, CT 06450, U.S.A.Tel: (800) 243-6894

(203) 237-5541Fax: (203) 238-8977

Service Worldwide

CUNO Pacific Pty Ltd140 Sunnyholt Road

Blacktown, NSW 2148Australia

CUNO K.K.Hodogaya Station

Building 6F1-7 Iwai-cho, Hodogaya-kuYokohama 240-0023 Japan

CUNO Latina LtdaRua Amf Do Brasil 251

18120 Mairinque-SpBrazil

CUNO Ltd21 Woking Business Park

Albert DriveWoking, Surrey GU215JY

United Kingdom

Visit us at www.cuno.com for more informationabout CUNO Products or the location of your local sales office

CUNO Filtration Asia Pte Ltdrd18 Tuas Link 1 (3 Floor)

Singapore 638599

Cuno Filtration Shanghai Co, Ltd No. 2 Xin Miao San Rd,

Xin Miao Town, Song Jiang District,

Shanghai. China. 201612

LITHSCT3.0404 Re places LITHSCT3.0303 c CUNO In cor po rated 2002, 2004 - All rights re served