ct708e(g) & ct708ev(g) - neufert-cdn.archdaily.net · ct708e(g) & ct708ev(g) wall-mounted...
TRANSCRIPT
CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used with
High Efficiency Flushometer ValveFEATURES
• Wall-mounted outlet• Elongated front bowl• Optional CeFiONtectTM ceramic glaze - prevents
debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
MODELS
• CT708E Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat
• CT708EG Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat with CeFiONtect ceramic glaze
• CT708EV Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat
• CT708EVG Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat with CeFiONtect ceramic glaze
• SC534 seat (sold separately)• SC134 seat (sold separately)• THU111 Retro-fit mounting bolt cap set (4 pcs sold
separately)
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet flushing system toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall have optional CeFiONtect ceramic glaze. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl. Toilet shall be TOTO Model CT708E______.
COLORS/FINISHES
• #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifications: IAPMO (cUPC), State of Massachusetts,
City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA Compliant
FLUSHOMETER VALVES (sold separately)Manual EcoPower®
1.28 GPF 1.6 GPF 1.28 GPF 1.6 GPF
TMT1LN32#CP TMT1NNC-32 TET1LN32#CP TET1GNC-32#CP
TET6LN32#CP TET6GNC-32#CP
TET3LN31#SS TET3GN31#SS
TET2LN31#SS TET2GN31#SS
CT7
08E
CT7
08EV
CeFiONtect
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve)
• Flush System Siphon jet flushing action• Min. Water Pressure 35 psi (flowing)• Min. Flow Rate 23 GPM• Water Surface 12" x 9-1/4"• Trap Diameter 2-1/8"• Trap Seal 2-5/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT708E(G) - 49lbs
CT708EV(G) - 53.5lbs• Shipping Dimensions CT708E(G) 17-1/8"L x 16" W x 26"H
CT708EV(G) 15-1/2"L x 15-1/2" W x 26-3/8"H
CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used
with High Efficiency 1.28GPF Flushometer Valve
18-1/2" (470mm)
24-7/8" (632mm)
9"
(229mm)
15-3/4"* (400mm)
5-1/2"
(140mm)
*6-3/8"
(162mm)
11-1/4"
(285mm) 12-3/4"
(323mm)
3-1/2"
(90mm)
2-3/8" (59mm)
3-7/8"
(99mm)
7-1/2"
(190mm)
Finished Wall (Must be flat surface)
Finished Floor
*16"
(406mm)
*17"
(432mm)
*Suggested
Dimension
1/16"
(1.7mm)
Wall
Gap
18-1/2" (470mm)
24-7/8" (632mm)
9"(229mm)
5-1/2"(140mm)
*6-3/8"(162mm)
*16"(406mm)
Finished Wall (Must be flat surface)
Finished Floor
2-3/4"(70mm)
1/16"(1.7mm)
WallGap
15-3/8" (390mm)
12-3/4"(323mm)
*4-3/4"(121mm)
*SuggestedDimension
11-1/2"(292mm)
2-3/8"(59mm)
7-1/2"(190mm)
1" N.P.T. supply forFlushometer valve
1-1/2"(38mm)
*17"(432mm)
# SS-00210 v.09Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
CT708E(G)
CT708EV(G)
1-3/4"(45mm)
Standardbolt cap
Wall
China China
Retrofitbolt cap
Wall
Note: If carrier bolt doesn’t extend/or is flush with china, then use retrofit caps THU111 (sold separately).
finished wall
Installation surface of bowl has 1/16” wall gapacross entire surface.
Top and Bottom mounting surfaces must be in the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
finished wall
Installation surface of bowl has 1/16” wall gapacross entire surface.
Top and Bottom mounting surfaces must be in the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
INSTALLATION NOTES
• Spuds are unique for TOTO product. For replacement spuds, contact TOTO for part number THU073R
CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used with
High Efficiency Flushometer ValveFEATURES
• Floor-mounted • ADA compliant• Elongated front bowl• Optional CeFiONtectTM ceramic glaze - prevents
debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
• 10"-12" rough-in
MODELS
• CT705ELNG Commercial ADA compliant, floor-mounted toilet with CeFiONtect ceramic glaze
• CT705ELN Commercial ADA compliant floor-mounted toilet
PRODUCT SPECIFICATION
The floor-mounted, ADA compliant, low consumption siphon jet flushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall be elongated front bowl and CeFiONtect ceramic glaze (CT705ELNG). Toilet shall be TOTO Model CT705ELN______.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone (not available with CeFiONtect) #12 Sedona Beige (not available with CeFiONtect)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, ASME A112.19.14,
• Certifications: IAPMO(cUPC), State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• ADA compliant
ADDITIONAL ITEMS (sold separately)
• SC534 seat• SC134 seat
FLUSH VALVESEcoPower® Manual
TET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF
TET1GNC-32 1.6GPF TMT1NNC-32 1.6GPF
TET6LN32#CP 1.28GPF
TET6GNC-32 1.6GPF
TET3LN32#SS 1.28GPF
TET3GN32#SS 1.6GPF
TET2GN32#SS 1.6GPF
TET2LN32#SS 1.28GPF
CeFiONtect
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve)
• Flush System Siphon jet flushing action• Min. Water Pressure 35 psi (flowing)• Min. Flow Rate 23 GPM• Water Surface 10-3/4" x 9-1/4"• Trap Diameter 1-7/8"• Rough-in 12", or 10"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT705ELN(G) - 56.5lbs • Shipping Dimensions CT705ELN(G) 26-1/2"L x 9-1/2" W1 x 16-
1/4"W2 x 19-1/2"H
CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used
with High Efficiency 1.28GPF Flushometer Valve)
18-1/2" (470mm)
25-1/4" (642mm)
with 10" rough-in with 12" rough-in
26-1/8" (663mm)
9"(230mm)
3" (76mm)
14-3/8" (365mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
*4-3/4" (121mm)
29"* (737mm)
1" I.P.S
1-1/2" I.P.S
10"(254mm)
18-1/2" (470mm)
25-1/4" (642mm)
28-1/8" (714mm)
5"(127mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
1-1/2" I.P.S
12"(305mm)
18-1/2" (470mm)
25-1/4" (642mm)
with 10" rough-in with 12" rough-in
26-1/8" (663mm)
9"(230mm)
3" (76mm)
14-3/8" (365mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
*4-3/4" (121mm)
29"* (737mm)
1" I.P.S
1-1/2" I.P.S
10"(254mm)
18-1/2" (470mm)
25-1/4" (642mm)
28-1/8" (714mm)
5"(127mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
1-1/2" I.P.S
12"(305mm)
18-1/2" (470mm)
25-1/4" (642mm)
with 10" rough-in with 12" rough-in
26-1/8" (663mm)
9"(230mm)
3" (76mm)
14-3/8" (365mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
*4-3/4" (121mm)
29"* (737mm)
1" I.P.S
1-1/2" I.P.S
10"(254mm)
18-1/2" (470mm)
25-1/4" (642mm)
28-1/8" (714mm)
5"(127mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
1-1/2" I.P.S
12"(305mm)
# SS-00453 v.07Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
INSTALLATION NOTES
These dimensions and specifications are subject to change without notice
• Spuds are unique for TOTO product. For replacement spuds, contact TOTO for part number THU073R
UT104E(V)0.5GPF Low Consumption Washout Urinal
FEATURES
• 0.5GPF• Compact urinal with concealed integral trap• Washout flush action with 3/4" top or back spud
inlet
MODELS
• UT104E Urinal with 3/4" top spud inlet
• UT104EV Urinal with 3/4" back spud inlet
PRODUCT SPECIFICATION
The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF flushometer valve. Urinal specified shall be model UT104E________.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative compliance: California AB715, California
Green Building Code• ADA compliant
• THU3010 Stainless Steel Urinal Drain Cover
ADDITIONAL ITEMS (sold separately)
RECOMMENDED FLUSH VALVESUT104E UT104EV
EcoPower® Manual EcoPower®
TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS
TEU3LN11#SS UT104E UT104EV
SPECIFICATIONS
• Water Use 0.5GPF/1.9LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 21-3/4"• Width 13"• Rim 14"• Shipping Weight UT104E(V) - 34.5lbs • Shipping Dimensions UT104E(V) 24" L x 13-3/4" W x 15-1/8" H
UT104E(V)0.5GPF Low Consumption Washout Urinal
2-1/2"
(61mm)
3/4"
(19mm)
Spud
12-3/8"
(315mm)
10-3/4"
(273mm)
4-1/2"
(114mm)
**17"
(432mm)
ADA
24"
(610mm)
**Recommended for ADA height installation for 17” floor to rim.
2"
(51mm)
I.P.
Inside
Threads4-1/4"
(108mm)
4-1/4"
(108mm)
3/4" (19mm) I.P.S. Supply for
Flushometer Valve
4-3/4"
(121mm)
13"
(330mm)
9-7/8"
(250mm)
21-3/4"
(552mm)
11-1/2"
(292mm)
OR
1-1/2"
(40mm)
3/4" (19mm)
Spud
2"
(51mm)
I.P.
Inside
Threads4-1/4"
(108mm)
4-1/4"
(108mm)
10-3/4"
(273mm)
12-3/8"
(315mm)
21-3/4"
(552mm)
13"
(330mm)
9-7/8"
(250mm)
**Recommended for ADA height installation for 17” floor to rim.
24"
(610mm)
**17"
(432mm)
ADA
4-1/2"
(114mm)
OR
Finished Wall
Outlet
Outlet Detail
GasketFinished Floor
C/L
Gasket
Outlet Detail
Outlet
Finished Wall
Finished Floor
C/L
UT104E UT104EV
14"
(356mm) 14"
(356mm)
# SS-00258 v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
INSTALLATION NOTES
Adjust angle stop accordingly to prevent overflow.Confirm with local codes and standards for floor drain requirement.
UE930Lloyd® Urinal
FEATURES
• Compact urinal with concealed integral trap• Washout flush action• Top spud inlet• Can be mounted at ADA compliant height
MODELS
• UE930#01 Lloyd urinal and electronic flush valve
COMPONENTS
• UT930 Lloyd urinal only
• TEY1DNC-42 Lloyd electronic flush valve only, 1.0GPF or less
PRODUCT SPECIFICATION
Urinal shall be made of vitreous china. The wall-mounted, ADA compliant, washout urinal shall be 1.0GPF or less when paired with TEY1DNC-42 flushometer valve. Urinal specified shall be model UE930________.
COLORS/FINISHES
• Standard #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
SPECIFICATIONS
• Water Use 0.5GPF - 1.0GPF • Flush System Spreader nozzle• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 29-1/4"• Width 16-1/2"• Rim 14"• Shipping Weight UE930 - 57.3lbs • Shipping Dimensions UE930 30-5/16" L x 15-1/8"
W x 17-3/4" H
UE930Lloyd® Urinal
*Suggested Dimensions
5-1/8"(131mm)
42"(1068mm)
14" (356mm)
6" (152mm )
Outlet Detail
19-1/2"(495mm)
Outlet 2"(51mm)
I.P.S
4-3/4"(120mm) 24"
(610mm)
1" (25mm)
4-1/4" (108mm)2-1/2" (63mm)
37-3/4"(960mm)
11"(280mm)
6-1/2"(165mm)
29-1/4"(744mm)
16-3/8"(415mm)
6"(150mm)
19-1/2"(495mm)
6" (152mm)
16-1/2" (420mm)
10-1/8" (258mm)
9-1/2" (246mm)
5/8" Spud(16mm)
*Suggested Dimensions
5-1/8"(131mm)
42"(1068mm)
14" (356mm)
6" (152mm )
Outlet Detail
19-1/2"(495mm)
Outlet 2"(51mm)
I.P.S
4-3/4"(120mm) 24"
(610mm)
1" (25mm)
4-1/4" (108mm)2-1/2" (63mm)
37-3/4"(960mm)
11"(280mm)
6-1/2"(165mm)
29-1/4"(744mm)
16-3/8"(415mm)
6"(150mm)
19-1/2"(495mm)
6" (152mm)
16-1/2" (420mm)
10-1/8" (258mm)
9-1/2" (246mm)
5/8" Spud(16mm)
# SS-00260 v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
INSTALLATION NOTES
Recommended Carrier:Jay R. Smith 0636 (Wall Hanger)0637 (Wall Hanger with bottom)
UT105U(V)(G)High-Efficiency 1/8 GPF Washout Urinal
FEATURES
• Compact urinal with concealed integral trap• Washout flush action with 3/4" top or back spud
inlet• Complete with low profile dome strainer• Optional CeFiONtect™ ceramic glaze - CeFiONtect
glaze prevents debris and mold from sticking to ceramic surfaces, leading to fewer chemicals.
MODELS
• UT105U Urinal with 3/4" top spud inlet
• UT105UG Urinal with 3/4" top spud inlet and CeFiONtect
• UT105UV Urinal with 3/4" back spud inlet
• UT105UVG Urinal with 3/4" back spud inlet and CeFiONtect
PRODUCT SPECIFICATION
The wall-mounted, ADA compliant, high-efficiency washout urinal shall be 0.125GPF/0.47LPF when paired with a 0.125GPF flushometer valve. Urinal shall have optional CeFiONtect ceramic glaze. Urinal specified shall be model UT105U___.
COLORS/FINISHES
• #01 Cotton (CeFiONtect optional) #03 Bone (special order only) #12 Sedona Beige (special order only)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative Compliance: California AB715, CALGreen Title 24, California Energy Commission Standards• ADA compliant
RECOMMENDED FLUSH VALVESUT105U(G) UT105UV(G)TEU1UN12#CP TEU2UN11#SS
TEU3UN11#SS
MEETS CALIFORNIAWATER SAVING
REGULATIONS
Dual-Max
CeFiONtect
SPECIFICATIONS
• Water Use 0.125GPF/0.47LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 21-3/4"• Width 12-1/4"• Rim 14"• Shipping Weight UT105U(V)(G) - 37.5lbs • Shipping Dimensions UT105U(V)(G) 24" L x 13-3/4" W x 17" H
UT105U(V)(G)High-Efficiency 1/8 GPF Washout Urinal
2010ADA605.2
# SS-00463 v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
INSTALLATION NOTES
Install this product according to the installation guide.
Refer to manufacturer’s instructions and local codes forflushometer requirements.
Will comply with ADA when installed per Section 605 - Urinals of the ADA 2010 Accessible Design Standard with maximum rim height of 17” and minimum depth of 13-1/2”.
Will comply with CSA B651 when installed per Clause 6.2.8 Urinals of the CSA 2012 Accessible Design Standard with maximum rim height of 17” and minimum depth of 13-1/2”.
Ultra-low high efficiency urinals require a system with a minimum 2% slope. Maximum drainage capacity rated at 6.6 gal/min (25 L/min). Adjust angle stop accordingly to prevent overflow. Confirm with local codes and standards for floor drain requirement.
UT445U(V)0.125GPF High-Efficiency Washout Urinal
FEATURES
• Full size urinal with concealed integral trap• Washout flush action with 3/4" top or back spud inlet• 0.125 GPF with any TOTO flush valve shown below• Complete with low profile dome strainer
MODELS• UT445U
Urinal with 3/4" top spud inlet
• UT445UV Urinal with 3/4" back spud inlet
PRODUCT SPECIFICATION
The wall-mounted, ADA compliant, high-efficiency washout urinal shall be 0.125GPF/0.473LPF when paired with a TOTO 0.125GPF flushometer valve. Urinal specified shall be TOTO Model UT445U__.
Flush valve specified shall be TOTO Model ________________________.
COLORS/FINISHES
• #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative Compliance: California AB715, CALGreen Title 24, California Energy Commission Standards• ADA compliant
ADDITIONAL ITEMS (sold separately)
UT445U Shown with TEU1UN12
UT445UV Shown with TEU2UN11
RECOMMENDED FLUSH VALVES
UT445U UT445UV
EcoPower® Flush Valve EcoPower®
TEU1UN12#CP TEU2UN11#SS - 14"x 12"
TEU3UN11#SS - 4" x 4"
MEETS CALIFORNIAWATER SAVING
REGULATIONS
SPECIFICATIONS INSTALLATION NOTES
• Water Use 0.125GPF/0.473LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 26"• Width 17-3/4"• Rim 14-1/4"• Shipping Weight UT445U(V) - 60lbs • Shipping Dimensions UT445U(V) 29" L x 18" W x 16" H
UT445U(V)0.125GPF High-Efficiency Washout Urinal
# SS-00998 v.06Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
UT445U UT445UV
Ultra-low high efficiency urinals require a system with a minimum 2% slope. Maximum drainage capacity rated at 6.6 gal/min (25 L/min). Adjust angle stop accordingly to prevent overflow. Confirm with local codes and standards for floor drain requirement.
TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 3/4” angle stop and 1-1/4” or 3/4" vacuum breaker set
• 1.0 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #CP Polished Chrome
TEU1GNC Valve only, Left and right rough, Polished Chrome fi nish
TEU1GNC-12 (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
TEU1GNC-22 (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 • 3/4" Angle stop - 10077t4 • 1-1/4" Vacuum breaker - 10075t5 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.0 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’sEcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
*Check local codes
L
Max 19-11/16"(Max 500mm)
Max 31-1/2"(Max 800mm)
15
4-3/4 1/2"(120 13mm)
3/4"inlet supply
11-1/2"(292mm)1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"NPT
TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
# SS-00057, v.02Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.0 gpf / 3.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
NOTESTOTO’s 1.0 gpf EcoPower fl ush valves use “Fuzzy Logic” technology to offer further water conserva-tion. The fl ush valve’s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per fl ush. In facilities with frequent use, the fl ush valve issues less water per fl ush with a full fl ush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full fl ush every time.
TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum breaker set
• 1.6 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION• #CP Polished Chrome
TET1GNC Valve only, Left and right rough, Polished Chrome fi nish
TET1GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’s®
EcoPower Flush Valves™, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
4-3/4" 1/2"(120 13mm)
Min.2-1/4"(57mm)
1"NPT
11-1/2"(292mm)
**Check local codes
L
Max19-11/16"(Max 500 mm)
Max31-1/2"(Max 800 mm)
15
TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
# SS-00085, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating
system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES*Alternate ADA InstallationMount grab bar at the 36” (914mm) maximum allowed height or use the split grab bars.
1/8 GPF Urinal EcoPower® Flushometer Valve
FEATURES
• Electronic fl ushometer valve, neutral rough-in, complete with 3/4” angle stop and 3/4" vacuum breaker set
• Hydropower self-generating system• 1/8 GPF or less• Manual override button• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS (to be listed)PRODUCT SPECIFICATION
• #CP Chrome
• TEU1UN#CP Valve only, Left and right rough, Chrome plated fi nish
• TEU1UN12#CP (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
California AB715, California Green Building Code and others
• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with nickel chrome fi nish. Vandal resistant hex head screws. Automatic sensor adjustment on installation. Manual override button incorporated. Solenoid with self-cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breakerincluded with accessories.
TEU1UN Series
L
Max19-11/16"
(Max 500 mm)
Max31-1/2"
(Max 800 mm)
15
TEU1UN Series1/8 GPF Urinal EcoPower® Flushometer Valve
# SS-00484, v.01Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ƛ
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting• Power Supply Hydro-Power Charge• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1/8 gpf / 0.47 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
*Check local codes
4-3/4 1/2"
(120 13mm)3/4"inlet supply
11-1/2"(292mm)1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"NPT
TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1"
angle stop and 1-1/2" vacuum breaker set• 1.6 gpf or less• Back spud fl oor, top spud and back spud wall
models - concealed 14" x 12" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
TET2GN#SS Valve only, Surface mount, Satin fi nish
TET2GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
TET2GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
TET2GN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 14” x 12” cover plate with stainless steel satin fi nish and vandal resistant mounting screws. Low water consumption of 1.6 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
#SS-00089, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
INSTALLATION NOTES
The recommended installation for the toilet fl ush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
Top Spud Back Spud Floor Mount Back Spud Wall Mount
* +/- 1/2”
14-3/4”
of frameand fixture
Dimensions: Inch (not to be scaled)
fixture
NOITALLATSNI DEDNEMMOCERMARGAIDTET2GN31#SSTET2GN32#SS TET2GN33#SS
Always position the sensor above upright toilet seats and grab bars = At least 5” clearance from sensor to tip of toilet seat up
position or to top of grab bar is required to avoid false detection.
*Leave some room for elbow nut from the wall for future maintenance.
11-1
5/16
”
5-1/
8”
3-13
/16”
Opening in wall
Ope
ning
in w
all
of sensor
13-1/2”
4-3/4”*
OV
ER
RID
EB
UTT
ON
LOC
ATI
ON
LOC
ATI
ON
SE
NS
OR
SupplyFinished Wall Finished Wall Finished Wall
High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 14"x 12" Cover plate• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
TEU2LN#SS Valve only, Surface mount, Satin fi nish
TEU2LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
TEU2LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty 14"x12" stainless steel coverplate with satin fi nish. Vandal resistant hex head screws. Lower water consumption of 0.5 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self cleaning debris screen and solenoid with self cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU2LN Series
Dimensions: Inch
Urinal Urinal
Finished wall
Supply Supply
16”
2-3/8” 2-3/8”
3-3/4”3-3/4”
16”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall
OVE
RR
IDE
BUTT
ON
LOC
ATIO
NSE
NSO
RLO
CAT
ION
Back spud (ø1-5/16”)
13-1/2”
4-3/4”*
Opening in wall
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
Ope
ning
in w
all
Top of the Urinal
11-1
5/16
”
5-1/
8”
3-13
/16”
*+/- 1/2”
16”
TEU2LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
#SS-00094, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Urinal type Low consumption wash down
and jetted fl ush design urinals• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall.
DIAGRAM RECOMMENDED INSTALLATION
High-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpfFEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set• 1.28 gpf or less• Back spud fl oor, top spud and back spud wall
models - concealed 4" x 4" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
TET3LN#SS Valve only, Surface mount, Satin fi nish
TET3LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
TET3LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
TET3LN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 1.28 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TET3LN Series
x xx
TOTOEcoPower®SupplySupplySupply
16”16”11”
ofsensor
ofsensor
ofsensor
5”3”
frame
(3-3/4"- 4-7/8") *
2-1/4” Min.
6 - 7-1/8”
2-3/8” 2-3/8” 2-3/8”
(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *
ElbowNut
Dimensions: Inch
OVE
RR
IDE
BUTT
ON
LOC
ATIO
N
LOC
ATIO
NSE
NSO
R
Opening in Wall: Top SpudFinished wall Finished wall Finished wall
Bowl
BowlBowl
Back Spud Floor Mount Back Spud Wall Mount
4-3/4”
4-3/4”*
4-3/4”*
3-15/16” x 3-15/16”
3-3/
8”
1-3/
4”
of frameand fixture
Supply
* +/- 1/2”
TET3LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf
#SS-00092, v.05Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the toilet fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.
Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.
Depending on X, the frame may not be centered to Supply C as shown.*Leave some room for elbow nut from the wall for future maintenance.
L
TET3LN-31#SSTET3LN-32#SS TET3LN-33#SS
High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf
FEATURES• EcoPower® hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 3/4" vacuum breaker set• 1/8 gpf or less• Back spud - concealed 4" x 4" Cover plate• 12 hour automatic fl ush for trap seal protection
PRODUCT SPECIFICATION
COLORS/FINISHES• #SS Stainless Steel
MODELS• TEU3UN#SS Valve only, Surface mount, Satin fi nish
• TEU3UN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
CODES/STANDARDS (to be listed)• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative Compliance: California AB715,
California Green Building Code and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, urinal valve. 4” x 4” cover plate with brushed stainless steel fi nish. Low water consumption of 1/8 gallons per fl ush. Stainless steel self-cleaning debris screen and self-cleaning solenoid. Electrical sensor separated from valve and sealed in a waterproof compartment. manual override button incorporated. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breaker included with accessories.
TEU3UN
TOTOEcoPower®
OVE
RRID
E BU
TTO
NLO
CATI
ON
LOCA
TIO
NSE
NSO
R
16"
Urinal
Frame
Supply2-3/8”
3-3/4”
16”
Back Spud 3/4”
Solder joint
Finished wall
Back spud (ø1-5/16”)*+/- 1/2”
Dimensions: Inch
Top of the Urinal
Location of the Left watersupply pipe 3/4” NPT
Location of the Right water supply
pipe 3/4” NPT
4-3/4”
3-15/16”
3-15/16”
4-3/4”* 4-3/4”*
Opening in Wall:3-15/16” x 3-15/16”
4-3/4”
3-3/
8”
1-3/
4”
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
TEU3UNHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf
#SS-00625, v.03Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting• Power Supply Hydro-Power Charge• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1/8 gpf / 0.47 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.
DIAGRAM RECOMMENDED INSTALLATION
High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 4" x 4" Cover plate• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
TEU3LN#SS Valve only, Surface mount, Satin fi nish
TEU3LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
TEU3LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 0.5 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twelve hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU3LN Series
TOTOEcoPower®
OVE
RRID
E BU
TTO
NLO
CATI
ON
LOCA
TIO
NSE
NSO
R
16"
Urinal
Frame
SupplySupply2-3/8”
3-3/4”
16”
Urinal
3-3/4”
16”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall2-3/8”
Finished wall
Back spud (ø1-5/16”)*+/- 1/2”
Dimensions: Inch
Top of the Urinal
Location of the Left watersupply pipe 3/4” NPT
Location of the Right water supply
pipe 3/4” NPT
4-3/4”
3-15/16”
3-15/16”
4-3/4”* 4-3/4”*
Opening in Wall:3-15/16” x 3-15/16”
4-3/4”
3-3/
8”
1-3/
4”
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
TEU3LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
#SS-00096, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
FEATURES• Manual operated, non-hold open, toilet
fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set
• Piston valve action with 1.6 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMT1NNC Valve only, Right/Left hand rough
• TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube
TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included.
CODES/STANDARDS• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
11-1/2”
1” Inlet supply
1-1/2” NPSM4-3/4”*
MINIMUM2-1/4”
*Adjustable to 1/2” from standard
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
#SS-00036, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 100 psi*
Non-Hold Open Urinal Flushometer Valve - 1.0 gpf
FEATURES• Manual operated, non-hold open, urinal
fl ushometer valve complete with 3/4” angle stop and 3/4” or 1-1/4"vacuum breaker set
• Piston valve action with 1.0 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
TMU1NNC Valve only, Right/Left Hand Rough
TMU1NNC-12 (3/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with: Vacuum breaker & angle stop set – VB9CP-12 • 3/4” Angle stop – 10077t4 • 3/4” Vacuum breaker – 10075t2 • Spud nut & escutcheon – 71051Nt5 • Sweat solder kit – TH559EDVSJ1
TMU1NNC-22 (1-1/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with: Vacuum breaker & angle stop set – VB9CP-22 • 3/4” Angle stop – 10077t4 • 1-1/4” Vacuum breaker – 10075t5 • Spud nut & escutcheon – 71051Nt7 • Sweat solder kit – TH559EDVSJ1
Optional Part: Z-4000-J - Adapter for ground joint angle stops
TOTO® Model No. _____________________________Manual type urinal fl ushometer valve, non-hold-open piston type with, self-cleaning debris screen and precise fl ushing capability. Low consumption 1.0 lpf/3.8 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon.
CODES/STANDARDS• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TMU1NNC Series
11-1/2”
4-3/4”*
MINIMUM2-1/4”
*Adjustable to 1/2” from standard
1-1/2” NPSM
3/4” Inlet supply
TMU1NNC SeriesNon-Hold Open Urinal Flushometer Valve - 1.0 gpf
#SS-00324, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 3/4" NPT• Fixture type Low consumption urinal 1.0 gpf / 3.8 lpf fl ushometer type• Supply water pressure 15 psi - 100 psi*
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
FEATURES• Manual operated, non-hold open, toilet
fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set
• Piston valve action with 1.6 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMT1NNC Valve only, Right/Left hand rough
• TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube
TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included.
CODES/STANDARDS• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
11-1/2”
1” Inlet supply
1-1/2” NPSM4-3/4”*
MINIMUM2-1/4”
*Adjustable to 1/2” from standard
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
#SS-00036, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 100 psi*
DescriptionExposed, Battery Powered, Sensor Operated G2® Model UrinalFlushometer.
Flush Cycle�Model 8186-0.5 (0.5 gpf/1.9 Lpf)�Model 8186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)�Model 8186 Water Saver (1.5 gpf/5.7 Lpf)
SpecificationsQuiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer foreither left or right hand supply with the following features:• PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass• Flex Tube Diaphragm designed for improved life and reduced
maintenance• ADA Compliant OPTIMA Plus® Battery Powered Infrared Sensor for
automatic “No Hands” operation• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high
and low target detection• Isolated Latching Solenoid Operator, isolates magnetic components
from water contact• Engineered Metal Cover with replaceable Lens Window• Courtesy Flush™ Override Button• Four (4) Size AA Batteries factory installed• “Low Battery” Flashing LED• Infrared Sensor Range Adjustment Screw• Initial Set-up Range Indicator Light (first 10 minutes)• ¾” I.P.S. Screwdriver Bak-Chek™ Angle Stop• Free Spinning, Vandal Resistant Stop Cap• Adjustable Tailpiece• High Back Pressure Vacuum Breaker Flush Connection with One-piece
Bottom Hex Coupling Nut• Spud Coupling and Flange for ¾” Top Spud• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange• High Copper, Low Zinc Brass Castings for Dezincification Resistance• Fixed Metering Bypass and No External Volume Adjustment to Ensure
Water Conservation• Flush Accuracy Controlled by CID™ Technology• Diaphragm, Stop Seat and Vacuum Breaker to be molded from
PERMEX™ Rubber Compound for Chloramine resistance
Valve Body, Tailpiece and Control Stop shall be in conformance with ASTMAlloy Classification for Semi-Red Brass. Valve shall be in compliance withthe applicable sections of ASSE 1037, ANSI/ASME A112.19.6 and MilitarySpecification V-29193. Installation conforms to ADA requirements.
Special Finishes� PB Polished Brass (PVD Finish)� GP Gold Plate (PVD Finish)� BN Brushed Nickel (PVD Finish)� SF Satin Chrome
See Accessories Section and OPTIMA Accessories Section of the Sloancatalog for details on these and other OPTIMA Plus® Flushometervariations.
X
X
X
X
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
O P T I M A S Y S T E M SBattery Powered Flushometers
G2 Optima Plus 8186 S.S. — Rev. 0a (05/03)
Model
8186
ADA Compliant
AutomaticSloan G2 Optima Plus® Flushometers activate via multi-lobular sensor detection to provide the ultimate insanitary protection and automatic operation. A batterypowered infrared sensor sets the flushing mechanismafter the user is detected and completes the flushwhen the user steps away.
Functional & HygienicTouchless, sensor operation eliminates the need foruser contact to help control the spread of infectiousdiseases. The G2 Optima Plus Flushometer is providedwith an Override Button to allow a "courtesy flush" forindividual user comfort.
EconomicalSloan installed batteries speed installation and provideyears of metered flushing to control the use of waterand energy. Batteries can be changed without turningoff the water. The patented Isolated Operator ensuresreliability by isolating the solenoid components fromthe water.
Warranty5 year (limited)
X
X
X
X
X
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2003 Sloan Valve Company Printed in the U.S.A. Made in the U.S.A. G2 Optima Plus 8186 S.S. — Rev. 0a (05/03)
DescriptionExposed, Battery Powered, Sensor Operated G2® Model UrinalFlushometer.
Flush Cycle�Model 8186-0.5 (0.5 gpf/1.9 Lpf)�Model 8186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)�Model 8186 Water Saver (1.5 gpf/5.7 Lpf)
ELECTRICAL SPECIFICATIONS
1. A continuous, invisible lightbeam is emitted from theOPTIMA Plus Sensor.
2. As the user enters the beam’seffective range (15” to 30”)the beam is reflected into theOPTIMA Plus ScannerWindow and transformed intoa low voltage electricalcircuit. Once activated, theOutput Circuit continues in a“hold” mode for as long asthe user remains within theeffective range of the Sensor.
3. When the user steps awayfrom the OPTIMA PlusSensor, the Sensor initiatesan electrical signal thatoperates the Solenoid. Thisinitiates the flushing cycle toflush the fixture. The Circuitthen automatically resets andis ready for the next user.
X
X
Control CircuitSolid State6 VDC Input8 Second Arming Delay24 Hour Sentinel Flush
OPTIMA Sensor TypeActive Infrared
OPTIMA Sensor RangeNominal 15” - 30” (381 mm - 762mm), Adjustable ± 8” (203 mm)
OPERATION
X
X
X
Model
8186
Battery Type(4) AA Alkaline
Battery Life3 Years @ 4,000 Flushes/Month
Indicator LightsRange Adjustment/Low Battery
Operating Pressure15 - 100 psi (104 - 689 kPa)
Sentinel FlushOnce Every 24 Hours After the LastFlush
X
X
X
X
X
Note: Lens Deflector no longer needed fortargeting children or wheel chair users.
11½” (292 mm)
2¼” (57 mm) MIN.
16½” (419 mm)
C/L OFFIXTURE
FINISHEDFLOORFINISHED
WALL
4¾”(121 mm)
¾” I.P.S. (20 mm DN)
SUPPLY
VALVE ROUGH-IN
Typical Urinal Installation
Model 8186
FEATURES
• 19-1/2" diameter• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing
compound
COLORS/FINISHES
• Standard #01 Cotton
MODELS
• LT402#01 Lavatory only with single hole faucet center
• LT402.4#01 Lavatory only with 4" faucet centers
• LT402.8#01 Lavatory only with 8" faucet centers
LT402Self-Rimming Lavatory
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19-1/2" in diameter. Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT402_________.
# SS-00330 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT402Self-Rimming Lavatory
SPECIFICATIONS
• Waste 1-1/4" O.D.• Size 19-1/2"diameter• Basin 14-1/4"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 20-1/2 lbs.• Shipping Dimensions 19-5/8"L x 19-5/8"W x 9-1/2"H
These dimensions and specifi cations are subject to change without notice
8-1/4"(210mm) *13"
(330mm) *14"(356mm)
*31" (787mm)
4" (102mm)
8" (203mm)
1/2" (13mm)
*Suggested dimension
2-1/2" (64mm)
7-1/4"(184mm)
14-1/4"(362mm)
14" (356mm)
19-1/2" (495mm)
19-1/2"(495mm)
1-1/4" O.D. Waste
Supplies
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
• 17" x 14"• Vitreous china• ADA compliant• Concealed front overflow• Mounting assembly complete with installation
template and mounting screw set for wood countertops• THU410 is required for marble/granite type counter
top installation and must be purchased separately
LT569Undercounter Lavatory
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
MODELS
• LT569 (#01, #03, #12)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Meets ADA guidelines and ANSI A117.1
requirements when countertop is installed 864mm (34") from finished floor and lavatory is installed 205mm (8-1/8") minimum from front edge.
PRODUCT SPECIFICATION
The undercounter lavatory shall be made of vitreous china. Lavatory shall be 17"Width x 14" Depth. Product shall be with overflow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT569______.
# SS-00333 v.05Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO
LT569Undercounter Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste 1-1/4" O.D.• Size 19-1/4"W x 16-1/4"D• Basin 17"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 17.4 lbs.• Shipping Dimensions 22"W x 8-1/2"H x 18-1/2"L
These dimensions and specifications are subject to change without notice
1-1/8" (28mm)
14"(355mm)
1-1/8" (28mm)
1-1/8" (28mm) 1-1/8" (28mm)17" (432mm)
2-1/2" (63mm)
2-5/8"(68mm)
5-1/8"(131mm)
*13-1/8"(333mm)
*12"(305mm)
*8" (203mm)
1/2" (12mm)
7-1/2"(191mm)
16" (406mm)
13"(329mm)
*Suggested Dimension
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
Wood/Composite Wood/Etc.Mounting Hardware
THU408 or THU409(Included)
THU410(Sold Separately)
Marble/Granite/Etc.
FEATURES
• 20-7/8" x 18" lavatory with back splash
• Vitreous china
• ADA compliant
• Punching for concealed arm carrier
• Includes wall hanger
• Punching for concealed arm carriers
• Soap dispenser hole
LT307(A)Commercial Wall-Hung Lavatory
PRODUCT SPECIFICATION
The lavatory shall be 20-7/8" width and 18" depth.
The basin shall be 14-3/4" width by 10-1/8" depth.
The lavatory shall be made of vitreous china and
can be installed at ADA height with rear overflow. TOTO model number LT307A#01 shall be drilled
for soap dispenser. Lavatory shall be TOTO model
LT307_______.
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
MODELS
• LT307
Lavatory only, with single hole
• LT307.4
Lavatory only with 4" faucet centers
• LT307.8
Lavatory only with 8" faucet centers
• LT307A#01 (Cotton only)
Lavatory only with single hole. Left side soap hole
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1,
• Certifications: IAPMO(cUPC), State of Massachusetts , City of Los Angeles, and others
• Meets ADA ,TAS, ICC/ANSI A117.1 and CSA B651
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
LT307(A)Commercial Wall-Hung Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste 1-1/4" O.D.• Size 20-7/8"W x 18"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 40 lbs.• Shipping Dimensions 22-5/8"L x 19-1/8"W x 13-3/4"H
TOTO recommends the use of Jay R. Smith 0700 (Concealed Arms) with 19" arms 0800 (Wall Support Plate).
ADA COMPLIANCE CHECK
34" (864mm)* SUPPLIES
21" (533mm)*
18" (457mm)*
*SUGGESTED DIMENSIONS
BARRIER FREE CLEARANCE
27" (686mm)
8" (203mm)
6" (152mm)
9" (229mm)FINISHED FLOOR
17" (432mm)
18" (458mm)*
11-1/8" (283mm)
34" (864mm)MAX.
1-1/4" O.D.WASTE
FINISHED WALL
8" (203mm)
7-1/2" (191mm)*
10-1/8" (258mm)
18" (458mm)
14-3/4" (375mm)
19-3/8" (492mm)
20-7/8" (530mm)
1-1/4" (33mm)3-1/4" (82mm)
7-1/2" (191mm)
2-7/8" (73mm)
3-1/8" (79mm)WATER LEVEL
LT307A
LT307.44" (102mm)
16-7/8" (428mm)
33-1/4" (844mm)
3-7/8" (100mm)
8" (204mm) LT307.8
3/4" (20mm)
# SS-00336 v.08Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifications are subject to change without notice
FEATURES
• 19"x 15" • Oval Undercounter Lavatory• ADA compliant • Vitreous china• Front overfl ow• Mounting assembly complete with installation
template and mounting screw set for wood countertops• THU410 is required for marble/granite type counter
top installation and must be purchased separately
COLORS/FINISHES
• #01 Cotton
MODELS
• LT233 (#01)
LT233Atherton™ Undercounter Lavatory
PRODUCT SPECIFICATION
The undercounter lavatory shall be made of vitreous china. Lavatory shall be 19-3/8"in width and 15-1/2" in depth. Product shall be with overfl ow and lavatory shall include mounting assembly and be ADA compliant.TOTO Model LT233_________.
CODES/STANDARDS
• Meets ADA guidelines and ANSI A117.1 requirements when countertop is installed 864mm (34") from fi nished fl oor and lavatory is installed 25mm (1") minimum from front edge.
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles, and others.
#SS-01076 v.02Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
LT233Atherton™ Undercounter Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste: 1-1/4" (32 mm)• Overall Size: 22-5/8” (575 mm) x
18-3/8” (466 mm)• Cutout: 18-5/8"(473mm) x
14-3/4"(375mm)• Basin Depth: 4” (103 mm)• Basin: 19-3/8” (493 mm) x
15-1/2” (395 mm)
• Warranty: One Year Limited Warranty• Material: Vitreous china• Shipping Weight: 22.5lbs (10 kg)• Shipping Dimensions: 23-1/2" x 19-1/2" x 7-1/2”
Note: Low flow faucets are recommended.
These dimensions and specifications are subject to change without notice.
*
4" [103mm]
1" [25mm]
5 7/8" [150mm]
2 5/8" [65mm]
34" [864mm]*
1 14" *WASTE
8" [203mm]
* Suggested Dimensions
3/8" * SUPPLY
14" [356mm]*
10 3/4" [273mm]*
19 3/8" [493mm]
22 5/8" [575mm]
15 1/2" [395mm]18 3/8" [466mm]
BASIN WIDTH
BASIN DEPTH
MAX
24" [610mm]
1" [25mm]
27" [686mm]
1" [25mm]
11" [279mm]
9" [228mm]
8" [203mm]
MINIMUM
34" [864mm]
10 3/4" [273mm]
ADA COMPLIANCE CHECK
Wood/Composite Wood/Etc.Mounting Hardware
THU408 or THU409(Included)
THU410(Sold Separately)
Marble/Granite/Etc.
TEL105 SeriesStandard EcoPower® Faucet
FEATURES
• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth and consistent water distribution
• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and
mounting hardware - less supply lines• Equipped with 0.5gpm flow control
MODELS
COLORS/FINISHES
• #CP Polished Chrome• #BN Brushed Nickel• #PN Polished Nickel
TEL105-D10E • TELS105 (Standard Spout) • TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL105-D10EM • TEL105-D10E (Standard Spout Kit) • TLM10 (Mixing Valve)
TEL105-D10ET • TEL105-D10E (Standard Spout Kit) • TLT10 (Thermostatic Mixing Valve)
TEL105-C20E • TELS105 (Standard Spout) • TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL105-C20EM • TEL105-C20E (Standard Spout Kit) • TLM10 (Mixing Valve)
TEL105-C20ET • TEL105-C20E (Standard Spout Kit) • TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumption limit of 0.25gpc
• Complies to California Green Building Code, CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011
• Certifications: IAPMO(cUPC), State of Massachusetts, and others
• California Green Code and City of Los Angeles Water Efficiency Ordinance
• ADA compliant• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25% lead or less)
* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheet
LOW-LEAD
OPTIONAL ACCESSORIES
• THP3158#CP - 4" Cover Plate• 71244T8CC - 8" Cover Plate
Standard EcoPower® Faucet
#SS-01078, v.03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL105 Series
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
3-15/16” (100mm)
(50mm)
2-15
/16”
(7
4mm
)
4-1
/2”
(114
mm
)2”
(50m
m)
Max
dec
k th
ickn
ess
Faucet hole Ø1-3/8” (Ø35mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16” (100mm)
(50mm)
2-15
/16”
(7
4mm
)
4-1
/2”
(114
mm
)2”
(50m
m)
Max
dec
k th
ickn
ess
Faucet hole Ø1-3/8” (Ø35mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
Standard Controller
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle.
SPECIFICATIONSEcoPower
5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**(0.09 gpc = 0.5 gpm x 10/60 sec)Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***(0.19 gpc = 0.5 gpm x 20/60 sec)Equipped with 0.5 gpm flow control
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
Thermostatic Mixing Valve (TLT10)
TEL3GC & TEL5GC SeriesHelix® EcoPower® Faucet
FEATURES• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TEL3GC10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GC10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510
• TEL3GC60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GC60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560
• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed inwaterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve.
CODES/STANDARDS• Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative compliance: California AB 1953 &
Vermont S.152, California Green Code, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Helix® EcoPower® Faucet
#SS-00418, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com These dimensions and specifi cations are subject to change without notice
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8" (203mm)
6"(152mm)
6-1/2"(165mm
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)
6-5/8"(169mm)
4-15/16"(125mm)
6"(152mm)
5-1/2"(140mm)
10-1/4"(260mm)
1"(25mm)
1"(25mm)
31"(787mm)
10-1/4"(260mm)
6-5/8"(169mm
4-15/16"(125mm)
20-3/4"(527mm)Water supply
F.L.
30° 30°
TEL3GC & TEL5GC Series
SPECIFICATIONS
• Warranty Three year warranty• Material Bronze with polished chrome fi nish• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 60 Second Faucet: 1.0 gpm (4.0 lpm) 10 Second Faucet: 0.17 gal. per cycle (max)• Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet: temperature control Cold water - 104°F (Max)
range (When used under standard conditions)
• Anti-scald safety Provides the user protection feature against exposure to
excessive water temperature (Thermal mixing faucet, only)
NOTEFollowing the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL115 SeriesHelix® EcoPower® Faucet
FEATURES
• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth and consistent water distribution
• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and
mounting hardware - less supply lines• 0.5 gpm aerated fl ow
COLORS/FINISHES
• #CP Polished Chrome
MODELS
TEL115-D10E • TELS115 (Helix Spout) • TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL115-D10EM • TEL115-D10E (Helix Spout Kit) • TLM10 (Mixing Valve)
TEL115-D10ET • TEL115-D10E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)
TEL115-C20E • TELS115 (Helix Spout) • TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL115-C20EM • TEL115-C20E (Helix Spout Kit) • TLM10 (Mixing Valve)
TEL1115-C20ET • TEL115-C20E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumption limit of 0.25gpc
• Complies to California Green Building Code, CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011
• Certifi cations: IAPMO(cUPC), State of Massachusetts, and others
• California Green Code and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25% lead or less)
* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.LOW-LEAD
OPTIONAL ACCESSORIES• THP3158#CP - 4" Cover Plate• 71244T8CC - 8" Cover Plate• TH559EDV566 – Laminar Flow Nozzle
Helix® EcoPower® Faucet
#SS-01080, v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL115 Series
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
4-15/16”(125mm)
3-3
/4”
(95m
m)
6-3
/4”
(168
mm
)
Faucet hole Ø1-3/8” (Ø35mm)
2”(50mm)
2” (5
0mm
)M
ax d
eck
thic
knes
s 5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)Helix Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle
SPECIFICATIONSEcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm aerated flow
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10)
TEL135 SeriesHelix® Wall-Mount EcoPower® Faucet
FEATURES
• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth and consistent water distribution
• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and
mounting hardware - less supply lines• 0.5 gpm aerated fl ow
COLORS/FINISHES
• #CP Polished Chrome
MODELS
TEL135-D10E • TELS135 (Helix WM Spout) • TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL135-D10EM • TEL135-D10E (Helix WM Spout Kit) • TLM10 (Mixing Valve)
TEL135-D10ET • TEL135-D10E (Helix WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)
TEL135-C20E • TELS135 (Helix WM Spout) • TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL135-C20EM • TEL135-C20E (Helix WM Spout Kit) • TLM10 (Mixing Valve)
TEL135-C20ET • TEL135-C20E (Helix WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumption limit of 0.25gpc
• Complies to California Green Building Code, CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011
• Certifi cations: IAPMO(cUPC), State of Massachusetts, and others
• California Green Code and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25% lead or less)
* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.
LOW-LEAD
OPTIONAL ACCESSORIES• TH559EDV566 – Laminar Flow Nozzle
Helix® Wall-Mount EcoPower® Faucet
#SS-01084, v.03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL135 Series
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
Finished wall
Ø2-
3/8”
(Ø60
mm
)
7-11/16”(194mm)
7-5/16”(186mm)
Ø2-3/16” (Ø50mm)
Helix Wall-Mount Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle.
SPECIFICATIONSEcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm aerated flow
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10)
4-15/16”(125mm)
3-3
/4”
(95m
m)
6-3
/4”
(168
mm
)
Faucet hole Ø1-3/8” (Ø35mm)
2”(50mm)
2” (5
0mm
)M
ax d
eck
thic
knes
s 5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
TEL145 SeriesAxiom® EcoPower® Faucet
FEATURES
• Self-generating hydropowered EcoPower system
• No minimum daily usage requirement
• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth
and consistent water distribution
• Vandal resistant aerator housing
• Durable chrome plated spout body
• Single-hole mount
• Kit includes spout body, controller box , and
mounting hardware - less supply lines
• 0.5 gpm aerated fl ow
COLORS/FINISHES
• #CP Polished Chrome
MODELS
TEL145-D10E • TELS145 (Axiom Spout)
• TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL145-D10EM
• TEL145-D10E (Axiom Spout Kit)
• TLM10 (Mixing Valve)
TEL145-D10ET
• TEL145-D10E (Axiom Spout Kit)
• TLT10 (Thermostatic Mixing Valve)
TEL145-C20E • TELS145 (Axiom Spout)
• TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL145-C20EM
• TEL145-C20E (Axiom Spout Kit)
• TLM10 (Mixing Valve)
TEL145-C20ET
• TEL145-C20E (Axiom Spout Kit)
• TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have
hydropowered self-generating, EcoPower System.
The faucet shall have maximum of 10 seconds
on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models
only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumption
limit of 0.25gpc
• Complies to California Green Building Code,
CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1,
and NSF372-2011
• Certifi cations: IAPMO(cUPC), State of Massachusetts, and others
• California Green Code and City of Los Angeles
Water Effi ciency Ordinance• ADA compliant
• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25%
lead or less)
* For codes and standards of mixing valves TLM10 and TLT10,
please refer to corresponding product spec sheets.LOW-LEAD
OPTIONAL ACCESSORIES• THP3158#CP - 4" Cover Plate
• 71244T8CC - 8" Cover Plate
• TH559EDV566 - Laminar Flow Nozzle
Axiom® EcoPower® Faucet
#SS-01086, v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
TEL145 Series
1-1/16” (27mm)
1-1/
16”
(27m
m)
6-7/16”(163mm)
3-3/
4”(9
5mm
)
5”(126mm)
(50mm)
4-13
/16”
(122
mm
)1-
9/16
”(4
0mm
)M
ax d
eck
thic
knes
s
Faucet hole Ø1-3/8” (Ø35mm)
Axiom Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle.
SPECIFICATIONSEcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm aerated flow
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10)
1-1/16” (27mm)
1-1/
16”
(27m
m)
6-7/16”(163mm)
3-3/
4”(9
5mm
)
5”(126mm)
(50mm)
4-13
/16”
(122
mm
)1-
9/16
”(4
0mm
)M
ax d
eck
thic
knes
s
Faucet hole Ø1-3/8” (Ø35mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
TEL165 SeriesGooseneck Wall-Mount EcoPower® Faucet
FEATURES• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth and consistent water distribution
• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and
mounting hardware - less supply lines• Equipped with 0.5gpm flow control
COLORS/FINISHES• #CP Polished Chrome
MODELS TEL165-D10E
• TELS165 (Gooseneck WM Spout) • TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL165-D10EM • TEL105-D10E (Gooseneck WM Spout Kit) • TLM10 (Mixing Valve)
TEL165-D10ET • TEL165-D10E (Gooseneck WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)
TEL165-C20E • TELS165 (Gooseneck WM Spout) • TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL165-C20EM • TEL165-C20E (Gooseneck WM Spout Kit) • TLM10 (Mixing Valve)
TEL165-C20ET • TEL165-C20E (Gooseneck WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATIONTOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS• Operates below federally mandated consumption
limit of 0.25gpc• Complies to California Green Building Code,
CALGreen of 0.20 gpc• Meets or exceeds ASME A112.18.1M/CSA B125.1,
and NSF372-2011• Certifications: IAPMO(cUPC), State of
Massachusetts, and others• California Green Code and City of Los Angeles
Water Efficiency Ordinance• ADA compliant• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25% lead or less)
* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.
LOW-LEAD
OPTIONAL ACCESSORIES• THP3094 - Laminar Flow Nozzle
Gooseneck Wall-Mount EcoPower® Faucet
#SS-01090, v.04Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL165 Series
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
6-1/
2”(1
65m
m)
7”(177mm)
2” (50mm)Max Wall thickness
Ø1-1/8”(Ø29mm)
2-7/
8”(7
2mm
)8-
7/8”
(221
mm
)
2”(50mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)Gooseneck Wall-Mount Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle
SPECIFICATIONSEcoPower
5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**(0.09 gpc = 0.5 gpm x 10/60 sec)Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***(0.19 gpc = 0.5 gpm x 20/60 sec)Equipped with 0.5 gpm flow control
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck
thic
kness
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10)
MODEL:
VoltageFrequencyPower consuptionCurrent (Running)Electrical IsolationAir SpeedDrying TimeDimensions
WeightIP CodeNoise (@ 2 mt)Number of MotorsMotors SpeedMotors Driving SystemHands Detection System
240V 120V
220/230/240V~50/60 Hz1.760 W8.0A @ 230VacClass ll*200 Km/h (125 Mph)10-15 s300 x 195 x 617 (mm)11.81x7.67x24.29 (inches)9.55 Kg (21.1 Lb)IP3370 dB230.000 rpmSoft StartingIR - Barrier
110/120V~50/60 Hz1.749 W15.9A @ 120VacClass ll*200 Km/h (125 Mph)10-15 s300 x 195 x 617 (mm)11.81x7.67x24.29 (inches)9.55 Kg (21.1 Lb)IP3370 dB230.000 rpmSoft StartingIR - Barrier
VELTIA HAND DRYER
Data Sheet
VELTIA® an innovative hand dryer that operates without heating element. Operates automatically when putting your handsin the drying chamber and works based on high speed air allowing to dry hands in a very short time leaving on the skin anice feeling of a massage.
Besides a great effectiveness, VELTIA® includes a bad scents elimination system thanks to ZEROSMELL® (sold separatly).
VELTIA® is ideal for washrooms with medium and high number of users per day.
Patent Number: WO / 2006 / 042896
TECHNICAL, ENVIRONMENTAL AND MECHANICAL SPECIFICATIONS
MATERIALSHousing case and water tank made of High impact 2.6mm thick ABS with antibacterial protection in drying areaAll plastic pieces are properly prepared for recyclingInternal parts are contained by fire retardant plastic rated 5VA according to directive UL94VELTIA complies with ROHS directive
DIMENSIONS
617 mm24.29 ’’
195 mm7.67 ’’
300 mm11.81 ’’
CERTIFICATIONSEuropeans Directives:Other CertificationsD89/336/CEE y D92/31/CEE;D73/23/CEE y D93/68/CEE;D98/37/CEE;D92/59/CEE y D2001/95/CEEOther Certifications:ANCE NOM, SABS, UL
Product information subject to changes without further notice
Rev.:1.1 Oct 2.008 VELTEK SYSTEMS S.L. 1/2
VELTIA HAND DRYER
Data Sheet
RECOMENDED HEIGHTSFOR INSTALLATION
MAINTENANCE
Product information subject to changes without further notice
Rev.:1.1 Oct 2.008 VELTEK SYSTEMS S.L. 2/2
Warning: Water tank full; mustbe emptied.
1 2
Air Filters: To be checked often and cleaned ifnecessary.
ZeroSmell®: Must be changedevery 3 months.
97.8cm / 38.5¨
82.8cm / 32.6¨
90cm / 35.4¨
75cm / 29.5¨67cm / 26.4¨
52cm / 20¨
38cm / 14¨
23cm / 9¨
ø: 8mm (5/16)
LL
HDR120#WHSensor Activated Clean Dry® Hand Dryer
FEATURES
• Hygienic sensor-activated hand dryer• Double-sided blowers for faster dry time• Sleek and compact design• 208 mph of air speed• Side panels and water tray to prevent water from
trickling to the floor• Low operating noise - 57dB(A) • Energy efficient
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #WH White
• Meets or exceeds ANSI/UL 507, 9th edition, Rev. June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.
• Certifications: Intertek/ETL
TOTO Model No. HDR120#WH shall be a sensor activated hand dryer. Product shall have double-sided blowers with 208mph of air speed. Product shall have the decibel rating of 57dB(A) and power rating of 690 W.
17-1/8”(435mm)
19-1/4(490mm)
2-3/4”(70mm)3-1/8”(80mm)
**Does not include junction boxRecommended mounting bracketheights from floor are as follows:
General users: 35” [890mm]Children: 26-1/8” [665mm]ADA: 34” [865] **
**For ADA installation, refer to codes.
Mounting bracket(Base plate)
Junction box**Inatallation Template
2”(50mm)
11-3/4”(300mm)
7-3/8”
(186mm)
3-7/8”(100mm)
2”(50mm)
21-5/8”(550mm)
3/4”(20mm)
***Clearance is required in order to take the water tray side covers for cleaning and maintenance.
HDR120#WHSensor Activated Clean Dry® Hand Dryer
# SS-00640 v. 03Printed in U.S.A. | © TOTO USA 05/13 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
ROUGH-IN
These dimensions and specifications are subject to change without notice.
• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC, 5.75 Amps, 60 Hz,
690 W• Power Saving Function Automatically turns OFF when
hands are removed or after 30 seconds of use
• Air Speed 208mph• Water Tray Capacity 0.25gal (950ml)• Unit Size 11 13/16” x 7 3/8” x 21 5/8”• Unit Weight 16.1lb (7.3kg)• Operating Temperature 32°-104°F (0°-40°C)• Shipping Size 25-5/8” x 14-31/32” x 10-15/16” (650mm x 380mm x 277mm)• Shipping Weight 21.4lb (9.7kg)
INSTALLATION NOTES
For ADA installation, refer to codes. See the templete for locating the installation of the mounting bracket.
HDR101#WHClean Dry® High Speed Hand Dryer
FEATURES
• High speed hand dryer• Hygienic, touch-free operation• Splash resistant• Water tray to prevent slip and fall• Space saving, compact design• Low Operating noise 57dB(A)• Energy Efficient 390W• AC powered
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #WH White
• Meets or exceeds ANSI/UL 507, 9th edition, Rev.June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.
• Certifications: Intertek/ETL• Code Compliance: NEC, CEC
TOTO Model No. HDR101#WH shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have water tray to prevent wet floor. The product shall have operating noise of 57dB(A) or less. The product shall be AC powered and consume 390 W or less.
HDR101#WHClean Dry® High Speed Hand Dryer
# SS-01066 v. 03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
ROUGH-IN
These dimensions and specifications are subject to change without notice.
• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC,3.3Amps, 60 Hz, 390 W• Power Saving Function Automatically turns OFF when
hands are removed or after 60 seconds of use
• Air Speed 220 mph• Water Tray Capacity 0.15 gal (600 ml)• Unit Size 9-5/8" x 6-1/8" x 18-1/2"
(245mm x 154mm x 470mm)• Unit Weight 7.9 lb (3.6 kg)• Operating Temperature 32F°-113F° (0C°-45C°)• Shipping Size 20-3/8" x 11-3/8" x 7-1/2"
(518mm x 289mm x 190mm• Shipping Weight 10.6lb (4.8kg)
INSTALLATION NOTES
Check local code requirements for additionalmounting height details.
For installation/uninstallation and proper functioning of front cover and water tray, keep some empty space around the product. There should be no obstructions within 30 mm from either side, 30 mm from the bottom, or 30 mm from the top of the product.
(600mm)23-5/8”
Recommended mounting bracket heights from floor are as followFor general users: 49-3/4”(1265mm)For users in wheel chairs: 42-3/8”(1077mm)For children: 40”(1015mm)
Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from floor. Check local code requirements for additional mounting height details.
(154mm)6-1/8”
(30mm)1-1/8”
(30mm)1-1/8”
(470mm)18-1/2”
(30mm)
1-1/8”
(245mm)
9-5/8”
(30mm)
1-1/8”
HDR111#SSClean Dry® High Speed Hand Dryer
FEATURES
• High speed hand dryer• Hygienic, touch-free operation• Splash resistant• Space saving, in-wall design• Vandal proof water tray• Low Operating noise 56dB(A)• Energy Efficient 390W• AC powered • Stainless Steel Cover• Flush mount• ADA compliant
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Finish
• Meets or exceeds ANSI/UL 507, 9th edition, Rev.June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.
• Certifications: Intertek/ETL• Code Compliance: NEC, CEC• ADA compliant
TOTO Model No. HDR111#SS shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have vandal proof water tray to prevent wet floor. The product shall have operating noise of 56dB(A) or less. The product shall be AC powered and consume 390 W or less. The product shall have stainless steel cover. The product shall allow for flush mount and be ADA compliant.
HDR111#SSClean Dry® High Speed Hand Dryer
# SS-01067 v. 03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
ROUGH-IN
These dimensions and specifications are subject to change without notice.
• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC,3.3Amps, 60 Hz, 390 W• Power Saving Function Automatically turns OFF when
hands are removed or after 60 seconds of use
• Air Speed 221 mph• Water Tray Capacity 0.22 gal (850 ml)• Unit Size 12-5/8" x 6-1/2" x 22-5/8"
(320mm x 164mm x 575mm)• Unit Weight 16.7 lb (7.6 kg)• Operating Temperature 32F°-113F° (0C°-45C°)• Shipping Size 27-1/8" x 15-3/4" x 8-13/16"
(690mm x 398mm x 223mm)• Shipping Weight 22.7lb (10.3kg)
INSTALLATION NOTES
Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from finished floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from finished floor.
Check local code requirements for additional mounting height details.
Stringer/additional stud, internal dimension
H21-5/8" x W12" (H550 x W305mm)
greater than
23-5/8” (600mm)
12“ (305mm)
21-5/8”
(550mm)
Additional stud
StudStud
Stringer
Stringer / Traverse / Tirante
Additional stud
Finish the wall with H21-5/8" x W12" (H550 x W305mm) aperture area.
greater than 5-3/8” (135mm)
21-5/8”
(550mm)
Finished Wall
Finished Floor
*
Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements
when mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and
for Canada is 47-1/4” (1200mm) max to blower outlet from floor.
Check local code requirements for additional mounting height details.
Recommended mounting bracket (lower) heights from floor are as follow:
For general users: 31-1/4”(795mm) For users in wheel chairs: 23-7/8”(607mm)
For children: 21-1/2”(545mm)
Air blows
Soufflerie d’air
Corrientes de aire
*
The service entrance of the power line
of the main unit (x3)
6-1/2”
(164mm)
22-5/8”(575mm)
12-5/8”
(320mm)
12” (305mm)
(550mm)
21-5/8”
Stringer / Traverse / Tirante
HDR130#SVClean Dry® High Speed Hand Dryer
FEATURES
• High speed hand dryer• Hygienic, touch-free operation• Durable aluminium construction• Low Operating noise 55dB(A)• Energy Efficient 390W• AC powered
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SV Silver
• Meets or exceeds ANSI/UL 507, 9th edition, Rev.June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.
• Certifications: Intertek/ETL• Code Compliance: NEC, CEC
TOTO Model No. HDR130#SV shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have operating noise of 55dB(A) or less. The product shall be AC powered and consume 390 W or less.
HDR130#SVClean Dry® High Speed Hand Dryer
# SS-01068 v. 03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
ROUGH-IN
These dimensions and specifications are subject to change without notice.
• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC,3.3Amps, 60 Hz, 390 W• Power Saving Function Automatically turns OFF when
hands are removed or after 30 seconds of use
• Air Speed 221 mph• Unit Size 9-5/8" x 6-1/8" x 9"
(245mm x 154mm x 230mm)• Unit Weight 8.2 lb (3.7 kg)• Operating Temperature 32F°-113F° (0C°-45C°)• Shipping Size 11-3/8" x 11-3/8" x 7-1/2"
(290mm x 289mm x 190mm)• Shipping Weight 10.6lb (4.8kg)
INSTALLATION NOTES
Check local code requirements for additional mounting height details.
(30mm)1-1/8”
(226mm)
(150mm)
8-7/8”
(154mm)6-1/8”
(30mm)
1-1/8”
(245mm)
9-5/8”
(30mm)
1-1/8”
Keep some empty space around the product. There should be no obstructions within 30 mm from each side, 150 mm from the bottom, 30 mm from the top.
5-7/8”
Recommended mounting bracket heights from floor are as followFor general users: 49-3/4”(1265mm)For users in wheel chairs: 42-3/8”(1077mm)For children: 40”(1015mm)
Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from floor. Check local code requirements for additional mounting height details.
(600mm)23-5/8”