cultimer 100 serie · pdf filemultipurpose tine stubble cultivator cultimer 100 serie be...
TRANSCRIPT
Multipurpose tine stubble cultivator
CULTIMER100 Serie www.kuhn.com
be strong, be KUHN
2
CULTIMER
3
RANGE OF MULTIPURPOSE
TINE STUBBLE CULTIVATORS
Stubble cult ivat ion is a key stage in intercropping. KUHN's Cult imer range provides a solut ion for every situat ion:
• Versatility, with 350 mm fi ns for superfi cial work and 50 mm and 80 mm t ines for in-depth work
• Mixing, both intensive and opt imal with the t ine/defl ector pair
• Clearance, signifi cant under the frame for working in areas where there are large quant it ies of plant debris
• Safety, with a double spring protect ing the equipment for constant effi ciency
• Compaction, with the different rollers available
• Adjustment, working depth is easily adjusted by posit ioning a pin
Choosing a CULTIMER, is ensuring high-quality work with a simple, robust, effective tool. One passage and two operations for optimal use.
100 SERIE
Models
CULTIMER 300 MOUNTED rigid 3
CULTIMER 350 MOUNTED rigid 3.5
CULTIMER 400 MOUNTED folding 4
CULTIMER 500 MOUNTED folding 5
Working width (m)
Frame
CULTIMER
1
2
3
VERSATILITY AND EFFICIENCYOF TINES
80MM POINT AND 350 MM FINS
Standard fi tt ing on the Cult imer, this point can be fi tted with 2 lateral fi ns to achieve stubble cult ivat ion at a depth of 7 to 15 cm. Without fi ns, this t ine allows working down to a depth of 35 cm.
CARBIDE COATED POINT AND FINS
Owing to their carbide plates, the durability of these parts is mult iplied by 5 with regards to convent ional parts: ensured t ime and labor cost savings. In addit ion to the carbide plates, the point is specially ribbed to limit as much as posssible wear on the surface. The 50 mm point is intended for deep restructurat ion (35cm) with low power requirement.
DUCK FOOT SHARE
This 3350 mm share is part icularly intended for shallow stubble cult ivation and allows scalping the whole soil surface even at shallow depth (3 to 7 cm).
4
WORK QUALITY WORK QUALITY COMFORTSHALLOW CULTIVATION FOR OPTIMAL MIXING
- The incurved 1 shape of the t ines promotes soil-residue mixing.
- The defl ector 2 increases the soil turning effect and facilitates evacuat ion and distribut ion of residues.
- Removable blades 3 allow t illing the soil over the whole surface during superfi cial shallow cult ivat ion.
DEEP STUBBLE CULTIVATION TO BREAK UP THE GROUND
- The 50 or 80 mm wide t ines allow working the soil as deep as 35 cm, in one or two passages if necessary, depending on the type of soil.
- Safety through the double spring provides deep penetrat ion capacity, prevents t ine slippage and protects the frame.
EXCEPTIONAL MIXING OWING TO THE CURVED TINE
The t ine curve combined to the defl ector allows intensive soil/plant residue mixing. The soil is turned over and mixed several t imes when in contact with the t ine before being ejected sideways. Straw is thus deposited over the whole surface worked to accelerate decomposit ion.
NON STOP MECHANICAL SAFETY
The large cross-sect ion double spring prevents drumming:- spring fastening point on the t ine generates a slight rotat ion of the axes,
- the t ine mount ing clip ensures a large contact area with the frame.
BENEFIT OF THE TINE SHAPE
The posit ion of the point with regards to the soil provides except ional pene-trat ion capacity even in dry ground. In addit ion to the intensive soil-straw mixing, the curved shape of the t ine allows reducing the power requirement compared with a straight t ine.
TRACTION BOLT SAFETY
- clean breakage at 3000 kg at the t ip prevent ing unt imely release,
- no shearing effect as the bolt is only stressed when in tract ion,
- very easy bolt replacement,- 61 cm point height clearance after bolt breakage
5
COMFORT
SAFETY AND PENETRATION
CAPACITY
CULTIMER
The mounted range owes its versatility to the different widths available, adapting to medium
and high-power tractors, as well as to the variety of wearing parts.
Thus, it can adapt to any kind of work.
The Cultimer is used for intensive, effective stubble ploughing, whether shallow or deep.
It adapts to every farm's conditions: active mixing of plant residues, necessary soil loosening,
straw breaking down...
HIGH CLEARANCEFOR ALL CONDITIONS
MOUNTED 300 / 350 / 400 / 500
SIGNIFICANT UNDER-BEAM CLEARANCE TO COPE WITH ANY CONDITIONS
- The clearance under the frame (840 mm) means you can work even where there are dense plant residues.
- The spacing of t ines on each row and between rows reduces the risk of clogging.6
The tine / disc and roller combination performs the following in a single passage:
- breakage, crumbling or intensive mixing;
- surface levelling;
- soil tamping
BENEFITS OF THE LEVELLING DISCS
The levelling disc gangs enable leaving a levelled soil after the t ines in order to opt imize roller work.- standard without safety or with elastomer safety as opt ion for stony fi elds and intensive use.
- the 2 end discs are fi tted as standard on elastomer safety with individual height adjustment per pin.
7
ACTION ON THE SOIL AND RESIDUES:
- Mixes crop residues with the soil to act ivate decomposit ion- Reduces the length of stubble- Destroys plant cover in a single passage
DESIGN WITH 3 ROWSOF TINES
8
VERSATILITY: SEEDING WHILE STUBBLE CULTIVATING
The SH small seed drill can be fi tted to drill a cover crop.With a capacity of 200 to 380 litres, with blower electric or hydraulic drive. The choice of metering units allows seeding all seed variet ies. Seeding capacity: 25 kg/ha in 6 m at 10 km/h with small seeds.
WORK QUALITY
9
T-LINER ROLLER
Diameter: 600 mmWeight: 140 kg/m
• Good tamping level• Work in stony condit ions• Crumbling of clayey or cloddy soil: T profile• Act ion on straw promot ing decomposit ion• Regulates depth when drilling plant cover
T-RING ROLLER
Diameter: 600 mmWeight: 130 kg/m
• Proper tamping level• Crumbling on clayey and/or cloddy soils• Coarseness preserved on compact silt• Act ion on straw promot ing decomposit ion• Good capacity to create stale seedbeds• Not recommended in stony condit ions.
CRUMBLER ROLLER
Diameter: 550 mmWeight: 75 kg/m
• Proper tamping level with load transfer• Light-weight, long service life• Versat ility
FOR EFFICIENT TAMPING: A FULL RANGE OF ROLLERS
PACKLINER ROLLER
Diameter: 600 mmWeight: 165 kg/m
• Good tamping level,• Good capacity to create stale seedbeds• Regulates the depth when drilling plant cover• Good seeding preparat ion in min-t ill cult ivat ion• Good performance in wet condit ions• Good machine hold in light soils
10
SAFETY DURING TRANSPORT
- Folding models fold to 3 m for transport in perfect safety.- Retract ion of levelling discs is provided on fi xed models.
LOW MAINTENANCE COSTS
Our carbide wear parts (t ips) are forged then treated. This makes them robust and extremely wear resistant. The grooves on the upper side fi ll with soil and reduce wear even further by the soil-soil contact.In addit ion, the carbide plates are posit ioned in3 separate areas on the t ip ensuring except ional soil penetrat ion on hard ground, reduced power requirement and a long life in terms of wear.
Note: The carbide plates tuck under the t ip to prevent them from detaching in stony condit ions.
LOW OPERATING COSTS
MAINTENANCE TIME SAVINGS
The t ines and the levelling disc hubs are maintenance-free to save you t ime.
COMFORT
11
Technical specifi cations Cultimer
CULTIMER 300
MOUNTED
CULTIMER 350
MOUNTED
CULTIMER 400
MOUNTED
CULTIMER 500
MOUNTED
Working width (m) 3 3.5 4 5
Transport width (m) 3 3.5 3 3
Frame rigid rigid folding folding
Number of t ines 10 11 13 16
Under-beam clearance (mm) 840 840 840 840
Distance between beams (mm) 700 700 700 700
Pitch between t ines (mm) 300 318 307 312
Width of share (mm) / blades (mm) 80/350 80/350 80/350 80/350
Weight (kg) 1690 2073 2700 3262
Max. tractor power (kW/hp) 132/180 155/210 175/240 221/300
Types of rollers available
Tube/T-Ring/T-Liner/Packliner
Tube/T-Ring/T-Liner
Tube/T-Ring/T-Liner/Packliner
Tube/T-Ring/T-Liner
BENEFITS FOR MAXIMUM USE AND PROFITABILITY OF YOUR EQUIPMENT
KUHN SERVICES:*
Express spare parts service 24/7You urgent ly need spare parts? With KUHN SOS ORDER benefi tfrom express delivery seven days a week, 365 days a year. Thus,you can minimize machine downt ime considerably and increaseyour work output.
The choice of professionals!Benefi t from 36 months in complete serenity because of KUHN´sPROTECT + warranty. You can concentrate exclusively on yourwork and the performance of your machine. Because this is whatyou expect, when invest ing in high-tech machinery.
For ever quicker repairs!An unexpected technical problem always occurs at the wrongt ime. Your KUHN dealer can support you quickly and effi cient lythanks to KUHN I TECH. With this 24/7 online service, a quickand exact diagnosis is possible.
Invest rationally!New machine necessary, fi nancing unsure? Modernize yourequipment and develop your farm with KUHN FINANCE,in total safety and according to your needs and demands.We offer custom-made fi nance solut ions, adapted to yourrequirements.
*Certain services are not available in all countries.
CULTIMER
1 2 3 4 5
To p
rote
ct t
he e
nviro
nment
, th
is leafl e
t is p
rint
ed o
n ch
lorine
-free p
aper.
/ P
rint
ed in
Franc
e - 9
50
03
9 G
B - 0
9.1
5 - C
opyr
ight
20
15
KU
HN
www.kuhn.com
VERSATILITY TO THE TINE TIP
300 350 400 500
Also fi nd KUHN on
Your KUHN dealer
Visit us on our YouTube channels.
Information given in this document is only for information purposes and is non-contractual. Our machines are in compliance with regulations in force in the country of delivery. In our literature, and for improved illustration of certain details, some safety devices may not be in operating position. When operating these machines, these devices must be in position in accordance with the requirements indicated in the operator’s manuals and assembly manuals. Respect the tractor gross vehicle weight rating, its lift capacity and maximum load per axle and tyres. The tractor front axle load must always comply with the regulations of the country of delivery (In Europe, it must reach minimum 20 % of the tractor net weight). We reserve the right to change any designs, specifi cations or materials listed without further notice. Machines and equipment in this document can be covered by at least one patent and/or registered design. Trademarks cited in this document may be registered in one or several countries.
KUHN - HUARD S.A.F - 44142 Châteaubriant Cedexwww.kuhn.comSociété Anonyme au capital de 4 800 000 EURN° Siret : 340636158 00016 - R.C. Nantes
KUHN NORTH AMERICA, INC.1501 West Seventh Avenue - Brodhead,
WI 53520 - USA
KUHN FARM MACHINERY PTY. LTD313-325 Foleys Road - Deer Park, VIC, 3023 - AUSTRALIA
KUHN FARM MACHINERY (U.K.) LTDStafford Park 7 - GB TELFORD/ SHROPS TF3 3BQ
For more information about your nearest
KUHN dealer, visit our website
www.kuhn.com
Discover KUHN’s disc or tine stubble cultivator range
1. OPTIMER+ 2. DISCOVER 3. DISCOLANDER 4. CULTIMER L 5. PERFORMER
STUBBLE CULTIVATION RANGE
OPTIMER+ DISCOVER DISCOLANDER CULTIMER PERFORMER
Working width (m/ft)3/9’10“ to 7.5/24’7“
3.40/11’1“ to 5.20/17’
3.70/12’1“ to 6/19’7“
3/9’10“ to 6/19’7“
4/13’ to 5/16’4“
Transport width (m/ft)3/9’10“ and
4/13’< 2.65/8’8“ 2.55/8’3“
2.82/9’2“ to 3.50/11’4“
3/9’10“
Number of discs or t ines 24 to 60 discs 28 to 44 discs 32 to 52 discs 10 to 19 t ines 14 to 18 t ines
Recommended working depth (cm) 3 to 10 5 to 18 5 to 18 5 to 35 10 to 35
Mounted or trailed version Mounted and Trailed Trailed Trailed Mounted and Trailed Trailed