cum mula tive

SUPER QUALITY SERVICES(CBE) S.F.No.504/3,505-A,Sulur railway feeder road,Pudur(po),Coimbatore-641406 Website:www.sqsndt.co.in,Mail:[email protected],Phone:0422-2360985,2361555 RADIOGRAPHIC EXAMINATION REPORT Customer : SUEERAA ALLOYS GLOBAL PRIVATE LIMITED Page No. 1 / 1 315/2, KANDAMPALAYAM, AVINISHI Client M/S SEVERN GLOCON PVT LTD Report No. SQSCNR/SUEERAA/0001 A Description : BONNET CAST 200-600# Report Date : 03/03/2015 Radiography No : SGR7733 Drawing No : 202014/600 Heat No : K0013 Grade : LCC 1C68 Date of Test : 14/02/2015 Area of Coverage : BETATRON ONLY Sketch Reference : Evaluation Reference : E280 Stage of test : - Beta Source Strength : 7.5mev MeV Size : 0.5 X 2mm Procedure Reference : ASME SEC V ART-2 Acceptance Standard : ASME B16.34 APPX-1 pb screen thickness : FRONT/BACK BETATRON 7.5MEV Technique : SWSI IQI : EN462-1&3 Film Brand : KODAK Part No. P.O No. : Notes - Total area claimed for Betatron : 2880 Sq.Inches Total No.of Films(Betatron) : 12 No's CASTINGS CONFIRMS TO SEVERITY LEVEL 4 A: Gas Hole/Porosity; B: Inclusion; CA,CB,CC,CD: Shrinkage; D: Crack; E: Hot Tear; F: Insert; SD: Surface Depression; NSD: No Significant Defect; ND : No Defect For SUPER QUALITY SERVICES(CBE) N.SURESH KUMAR LEVEL || SUPPLIER CUSTOMER EXTERNAL INSPECTOR Note - This Report Shall not be reproduced except in full, without written approval of the laboratory SQS/F/12 REV.01 Sl.N Location Source Thickness (mm) SFD (mm) Designation Sensiti vity Density Film Size (sq.inch) Findings* Classi fication Remarks 1 1 BETATRON 195 1000 1FEEN W2 2.0-2.4 10X12X2 NSD - Acceptable 2 2 BETATRON 195 1000 1FEEN W2 2.1-2.5 10X12X2 NSD - Acceptable 3 3 BETATRON 195 1000 1FEEN W2 2.2-2.6 10X12X2 NSD - Acceptable 4 4 BETATRON 195 1000 1FEEN W2 2.3-2.7 10X12X2 NSD Acceptable 5 5 BETATRON 195 1000 1FEEN W2 2.4-2.8 10X12X2 NSD Acceptable 6 6 BETATRON 195 1000 1FEEN W2 2.5-2.9 10X12X2 A 1 Acceptable

Upload: vivek-rao-bhosale

Post on 03-Oct-2015

3 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

DESCRIPTION

Reports Derived of NDT

TRANSCRIPT

SUPER QUALITY SERVICES(CBE)S.F.No.504/3,505-A,Sulur railway feeder road,Pudur(po),Coimbatore-641406

Website:www.sqsndt.co.in,Mail:[email protected],Phone:0422-2360985,2361555

RADIOGRAPHIC EXAMINATION REPORTCustomer : SUEERAA ALLOYS GLOBAL PRIVATE LIMITED Page No. 1 / 1

315/2, KANDAMPALAYAM, AVINISHI

Client M/S SEVERN GLOCON PVT LTD Report No. SQSCNR/SUEERAA/0001 ADescription : BONNET CAST 200-600# Report Date : 03/03/2015

Radiography No : SGR7733

Drawing No : 202014/600 Heat No : K0013

Grade : LCC 1C68 Date of Test : 14/02/2015

Area of Coverage : BETATRON ONLY Sketch Reference :

Evaluation Reference : E280

Stage of test : -

Beta Source Strength : 7.5mev MeV

Size : 0.5 X 2mm Procedure Reference : ASME SEC V ART-2

Acceptance Standard : ASME B16.34 APPX-1

pb screen thickness : FRONT/BACK BETATRON 7.5MEV Technique : SWSI

IQI : EN462-1&3 Film Brand : KODAK

Part No. P.O No. :

Notes -

Total area claimed for Betatron : 2880 Sq.Inches Total No.of Films(Betatron) : 12 No'sCASTINGS CONFIRMS TO SEVERITY LEVEL 4

A: Gas Hole/Porosity; B: Inclusion; CA,CB,CC,CD: Shrinkage; D: Crack; E: Hot Tear; F: Insert;SD: Surface Depression; NSD: No Significant Defect; ND : No Defect

For SUPER QUALITY SERVICES(CBE)

N.SURESH KUMARLEVEL || SUPPLIER CUSTOMER EXTERNAL INSPECTOR

Note - This Report Shall not be reproduced except in full, without written approval of the laboratorySQS/F/12 REV.01

Sl.No Location Source Thickness(mm)

SFD(mm)

Designation Sensitivity

Density Film Size(sq.inch)

Findings* Classification

Remarks

1 1 BETATRON 195 1000 1FEEN W2 2.0-2.4 10X12X2 NSD - Acceptable

2 2 BETATRON 195 1000 1FEEN W2 2.1-2.5 10X12X2 NSD - Acceptable

3 3 BETATRON 195 1000 1FEEN W2 2.2-2.6 10X12X2 NSD - Acceptable

4 4 BETATRON 195 1000 1FEEN W2 2.3-2.7 10X12X2 NSD Acceptable

5 5 BETATRON 195 1000 1FEEN W2 2.4-2.8 10X12X2 NSD Acceptable

6 6 BETATRON 195 1000 1FEEN W2 2.5-2.9 10X12X2 A 1 Acceptable