curriculum development advisory lifting supervisor safety course (lssc) · 2014-11-05 · 3...
TRANSCRIPT
1 CDA_LSSC
CURRICULUM DEVELOPMENT ADVISORY
Lifting Supervisor Safety Course (LSSC)
Version 2.3
22 Aug 2014
Workplace Safety and Health Council, Ministry of Manpower, Singapore (MOM) All rights reserved.
This document is provided for explicit use and guidance of MOM Accredited Training Providers as information resource for curriculum development and
assessment purposes. Any other use of this document or parts thereof, including reproduction, publication, distribution, transmission, retransmission or public
showing, or storage in a retrieval system in any form, electronic or otherwise, for purposes other than that expressly stated in this Advisory without the expressed
permission of MOM is strictly prohibited.
2 CDA_LSSC
Version History
Version Effective Date Changes Author
1.0 16 Aug 2010 First issue ICB, WSH Council Office
2.0 1 Nov 2011 Update ICB, WSH Council Office
2.1 1 Feb 2012 Additional requirement in para 7 and Annex C (para
4.3)
ICB, WSH Council Office
2.2 1 Sept 2013 Update ICB, WSH Council Office
2.3 22 Aug 2014 Update ICB,WSH Council Office
TABLE OF CONTENTS
1 Aim of the advisory 3
2 Scope of the course 3
3 Overview of course requirements 4
4 Table of specifications 4
5 Training delivery advice 5
6 Assessment advice 7
7 Trainer and Assessor requirements 10
8 End of course evaluation and feedback 10
9 Related WSH legislations, industrial code of practice 11
and other references
Annex A – Table for Specification Annex B – Course Reference Matrix Annex C - Sample Assessment Plan
3 CDA_LSSC
1 AIM OF THE ADVISORY 1.1 The Curriculum Development Advisory (CDA) is a document to assist MOM Accredited Training Providers (ATP) with the instructional design and development of a competency-based training course for Workplace Safety and Health. It aims to help ATP facilitate the learning process, deliver effective training and conduct competency-based training and assessment. 1.2 This document contains key information on the Lifting Supervisor Safety Course (LSSC) including the course aim, learning objectives, target audience, assumed skills and knowledge/entry requirements, course syllabus, recommended course duration, recommended class size, and recommended trainer/trainee ratio. It also sets forth guidelines for training delivery and assessment for the course.
1.3 This CDA will be reviewed on a regular basis and whenever it is deemed necessary due to changes in training syllabus or industrial requirements.
2 SCOPE OF THE COURSE 2.1 The LSSC is a mandatory course for individuals who are assigned to supervise lifting operation involving a mobile crane or tower crane or any other crane in the workplace. 2.2 WSH (Operation of Cranes) Regulations 2011 stipulates that it shall be the duty of the responsible person:
“To appoint a Lifting Supervisor before any lifting operation involving the use of any crane is carried out in a workplace.”
“Not to appoint any person as a Lifting Supervisor for any lifting operation involving the use of a mobile or tower crane unless the person is one who (a) has successfully completed a training course acceptable to the Commissioner to equip him to become a Lifting Supervisor; and (b) has, in the opinion of the responsible person, such relevant experience in lifting operations for at least one year.”
4 CDA_LSSC
3 OVERVIEW OF THE COURSE REQUIREMENTS 3.1 Learning objectives for the course:
3.1.1 Describe legislative requirements for safe lifting operation 3.1.2 List the duties of personnel involved in lifting operation 3.1.3 Comply with safe work procedure and planning for safe lifting 3.1.4 Coordinate and supervise lifting operations involving mobile cranes in a
safe and efficient way based on lifting plan 3.1.5 Coordinate and supervise lifting operations involving tower cranes in a safe
and efficient way based on lifting plan 3.1.6 Coordinate and supervise lifting operations involving other lifting machines
in a safe and efficient way based on lifting plan 3.1.7 Ensure correct rigging methods 3.1.8 Respond to lifting accident and emergencies
3.2 Target audience:
The course would be appropriate for individuals with job titles such as: Line Managers, Lifting Supervisor and Foreman
3.3 Entry requirement:
Workplace literacy and numeracy Level 4 and above under Employability Skills System (ESS) or equivalent
Successfully completed both Rigger course & Signalman course
3.4 Recommended course duration: 32 hours including 3 hours of assessment 3.5 Recommended class size: maximum 30 3.6 Recommend trainer/trainee ratio: 1: 30 3.7 Course attendance record: minimum 75% attendance 4. TABLE OF SPECIFICATIONS (TOS) 4.1 The table of specifications is a detailed listing of the course content to be covered
in the training and the weightage of assessment that will be devoted to each of the learning objectives. It is a structured format based on the cognitive domain of Bloom’s taxonomy.
4.2 Refer to Annex A for details of TOS
5 CDA_LSSC
5 TRAINING DELIVERY ADVICE 5.1 Trainer’s guide and trainees’ workbook/handouts
5.1.1 The ATP is required to prepare a trainer’s guide for the course. The guide should provide information or key pointers to help educate trainers on the course including
Course aim
Learning objectives
Target audience
Assumed skills and knowledge
Course duration
Class size and trainer/trainee ratio
Lesson plan
Course contents and instructional materials with emphasis in each of the training slide
Training methodologies
Training resource requirements
Course administration instruction
5.1.2 The ATP can also facilitate the learning process by providing each trainee with a trainee’s workbook or handouts. This set of notes should contain the course aim, learning objectives and the key learning points (WSHA 2006, subsidiary legislations, industrial code of practice, safety guidelines etc) as well as guides for learning activities including safe use of a mobile crane, tower crane and gantry crane. 5.1.3 The ATP is required to prepare and submit a course reference matrix (see Annex B) for coverage of course contents with respect to the training slides and the assessment modes.
5.1.4 It is the responsibility of the ATP to ensure that no part of the materials used for the training infringe on patent, design, copyright and intellectual property rights of any individual or organization. 5.1.5 The ATP shall retain an updated version of the training course syllabus, lesson plan, trainer’s guide and trainee’s workbook or handout at all times for inspection and verification by MOM.
5.2 Training methodology
5.2.1 Knowledge The knowledge component of this course is primarily focused on the requirements of the WSH (Construction) Regulations, WSH (Operation of Cranes) Regulations 2011 and Codes of Practices concerning lifting operations. There is also some degree of computation and key points on the use of mobile crane and tower crane.
6 CDA_LSSC
These can be delivered in a classroom using models and slides. To enhance learning, the following delivery methods can also be used to supplement classroom lectures:
Case studies (with or without video) Group discussion Videos and other e-resources and instructional media Problem-based learning and instruction Report writing exercise
5.2.2 Skill In terms of skills, it may be useful for the trainees to proceed on-site for demonstration and practice. The demonstration and practice may include four key skills:
Plan and supervise safe lifting operation involving mobile cranes, tower cranes and other lifting machines
Conduct pre-operation check, job planning, crane set-up, crane safe operation and crane shut-down
Check and supervise proper slinging and rigging practices Conduct inspection of lifting gear and accessories to ensure safe usage
5.2.3 Attribute Accidents can happen very fast at the worksite. A competent Lifting Supervisor in the construction industry must have a very high sense of “situational awareness”. At all times he must
Be aware of all movements within the vicinity of the crane
Be in full control of the whole crane operations
Be quick to react to any sign of danger to the crane operations
5.3 Training venue requirements
5.3.1 The ATP shall ensure that the classroom used for this LSSC training has adequate seating for the class of 30. Seating facilities inclusive of writing tables must be reasonably and comfortably spaced so as to be conducive to the learning process and for the purpose of conducting the assessment. Classrooms must be equipped with projectors, whiteboards, flipcharts and models of different types of cranes. The classroom must have adequate lighting and ventilation. Emergency exit routes must be clearly marked out and briefed to the course trainees at the start of the course.
5.3.2 Arrangements may be made for trainees to go on-site for a demonstration and practice or to observe an actual crane operation in progress or through models. This on-site training helps to promote experiential learning which forms a necessary part of the skills component of the training.
7 CDA_LSSC
5.4 Training resource allocation
WSH (Construction) Regulations
WSH (Operation of Cranes) Regulations
Code of Practice on Safe Lifting Operations in the Workplaces, SS 536:2008, SS 559:2010, CP 63:2005 and SS 497: 2011
Photos/slides of the various types of crane operations Case studies relating to crane accidents
Models of different types of cranes
Training videos
6 ASSESSMENT ADVICE 6.1 General guidelines for conducting competency-based assessment.
6.1.1 The ATP is required to prepare and submit an assessment plan (see Annex C for proposed sample with table of contents) for the LSSC. The aim of the assessment plan is to determine the competency of the trainee to undertake the role of a Lifting Supervisor at the construction site upon successful completion of the LSSC.
6.1.2 The assessment plan must be directly related to all the learning objectives determined in the course. It comprises four main parts: Overview of the assessment tools and its duration Instructions for the conduct of the assessment Instruments or tools of assessment (Question paper, checklist ) Assessment summary record
6.1.3 The assessment plan is subject to review on an annual basis by the ATP to ensure that trainees are constantly kept current and competent to perform up to the industrial requirements.
6.2 Principles of assessment Assessment will be fair, valid, reliable and flexible for all trainees without deliberate
barriers against the individual.
Fair – Are the assessments criteria clear? Do all the trainees know what to expect from the assessment? Does the assessment disadvantage any trainee? Do the trainees have any recourse to appeal?
Valid – Are the assessment methods and tools appropriate and effective in
assessing what they claim to assess. Are the evidence collected relevant to the training and demonstrates that the learning outcome has been achieved?
Reliability – Are the results consistent from one assessment to another? Do people
have the confidence that the standards are applied consistently from learner to learner and from context to context?
8 CDA_LSSC
Flexibility – Can the assessment be used for multiple assessments? Are the assessment tools and methods uniform across different approaches and drawing on a range of different methods? Can they be used appropriately to the context, task and individual under assessment?
6.3 Assessment tools and instruments
6.3.1 The ATP must conduct written test (compulsory) and use one or more skill-based assessment method such as practical performance, role-play or case study. There are four assessment instruments recommended to ATP: Written test (WT) – This method of assessment is quick and the most convenient
to conduct. It can be used for a large class and a wide range of subjects particularly knowledge-based. It can be conducted as a multiple choice questionnaire (MCQ).
Practical Performance (PP) – This method is highly recommended for skills assessment. It can be matched very closely to the actual task to be performed by the individual on the job. However PP can be tedious and time consuming if not properly planned and executed.
Role play (RP) – This method of assessment is an alternative to the practical
performance. It offers a greater flexibility and more options in terms of the range of responses expected of the trainee. Like PP, it is time consuming and resource intensive.
Case study (CS) – This method of assessment allows the ATP to use a wide range
of real on-site accident cases for training purposes. The materials are readily available on MOM website.
6.3.2 The total allocated time for assessment of the LSSC is 3 hours comprising 2 hours for 80 MCQ written test and 1 hour for other modes of assessment. 6.3.2.1 Written Test (WT) - 100 marks (2 hours):
Section A (85 marks): 10 MCQ (2 marks each) related to Lifting Plan and its requirements under the topic Planning for Safe Lifting Operations. 10 MCQ (1 mark each) related to Rigger and Signalman (R&S) 55 MCQ (1 mark each) on roles and duties of lifting personnel, legislations, safe work practices and other topics as in syllabus Pass Criteria: 65%
9 CDA_LSSC
Section B (15 marks): 5 MCQ (3 marks each) on load chart interpretation related areas under the topic Planning for Safe Lifting Operations Pass Criteria: 100% Trainees need to satisfy Pass Criteria in Section A and Section B to be considered to have achieved a Pass for the Written Test WT.
6.3.2.2 Other modes of assessments (PP/RP/CS) – 1 hour:
There should be interaction for discussion and participation by trainees to demonstrate skills and knowledge based on ‘show-and-tell’ technique where there should be evidence record to justify the competence of trainees.
Pass criteria: 65% (RP/CS); Pass Criteria: Competent (PP)
6.3.2.3 In the event trainee fail the assessments, ATP has the jurisdiction to allow
re-test only (without re-sitting the course) on the failed assessment(s) provided there is sufficient justification for this decision.
6.4 Briefing to trainees
6.4.1 The briefing to trainees is to explain the purpose and context of
assessment so as to ensure that there are no surprises during the conduct of assessment
6.4.2 The briefing to trainees should include
the assessment requirements and process, including clear instructions on each of the assessment to be taken
trainee’s rights & process of appeal to assessment outcome
6.4.3 During the briefing, assessors must take the opportunity to confirm with
trainee on any special needs & explain how needs will be addressed during assessment
6.4.4 Assessor must seek feedback and clarify trainee’s understanding of
assessment requirements before commencement of the assessment 6.5. Conduct of assessment 6.5.1 Assessment must be conducted strictly in accordance with the assessment
plan. In particular, each trainee must complete all the assessment requirements in the time allocated.
6.5.2 A judgment on the competency of the trainee must only be made based on
the evidence gathered. The evidence for each of the assessment instrument is given
10 CDA_LSSC
in the suggested response to the WT and the checklist accompanying the PP, RP and CS.
6.6 Recording and reporting of assessment outcome 6.6.1 All assessment outcomes must be accurately recorded in the assessment
summary record form. 6.6.2 Assessment outcome will be communicated to the trainee. 6.6.3 The ATP shall maintain a record of the assessment results for 2 years for
inspection by MOM. 7 TRAINER AND ASSESSOR REQUIREMENTS A trainer and assessor of this LSSC should possess the following:
Successfully completed the Rigger course, Signalman course and Lifting Supervisor Safety Course
WSQ Specialist Diploma in Workplace Safety & Health (WSH) qualification or equivalent; and
At least 5 years relevant working experience; and Advanced Certificate in Training and Assessment (ACTA) qualification or
equivalent. 8 END OF COURSE EVALUATION AND FEEDBACK 8.1 The ATP shall conduct an end-of-course evaluation at the end of each course. Trainees shall be allowed to provide quantitative and qualitative feedback on the course content, duration, training delivery, training materials, training venue, training resources, quality of trainers and assessors. 8.2 The ATP shall monitor the end-of-course evaluation and feedback closely to ensure that the ratings are consistently above 3. Immediate action should be taken whenever the ratings fall below 3. These actions should be properly recorded and kept for audit inspection.
1 2 3 4 5
Poor Fair Satisfactory Very good Excellent
11 CDA_LSSC
9 RELATED WSH LEGISLATIONS, INDUSTRIAL CODE OF PRACTICE AND OTHER REFERENCES (the list is not exhaustive)
Workplace Safety and Health Act 2006 and subsidiary legislations
WSH (Construction) Regulations 2007
WSH (Operation of Cranes) Regulations 2011
SS 536 : 2008 Code of Practice for the Safe Use of Mobile Cranes
SS 559 : 2010 Code of Practice for Safe Use of Tower Cranes
CP 63 : 2005 Code of Practice for the Lifting of Persons in Work Platforms
Suspended from Cranes
Technical Advisory for Safe Operation of Lifting Equipment (WSH Council website)
Checklist for Tower Crane Use (WSH Council website)
Code of Practice on Safe Lifting Operations
SS497: 2011 Design, safe use and maintenance of overhead travelling crane
Code of Practice on WSH Risk Management
12 CDA_LSSC
Annex A Table of Specifications-
S/N Learning Objectives Topic Sub-topic
Cognitive Domain of Bloom’s Taxonomy
Total Knowledge & Comprehension
Application Analysis,
Synthesis & Evaluation
1 Describe legislative requirements for safe lifting operation
Legislations on Lifting Operation
Workplace Safety and Health Act
WSH (Construction) Regulations
WSH (Operation of Cranes) Regulations
LTA Regulations concerning Lifting Equipment
Codes of Practices
Safe Work Practices for Lifting Operations
10% 10%
2 List the duties of personnel involved in lifting operation
Roles and Duties of
Personnel in Lifting
Operation
Duties of Lifting Supervisor
Duties of Crane Operators
Duties of Riggers
Duties of Signalman
5% 5%
3 Comply with safe work procedure and planning for safe lifting
Planning for Safe Lifting Operations
Lifting plan requirements
Permit-to-Work and safe work procedures
Interpretation of load charts and related terminologies
Proximity hazards and appropriate steps and measures to exclude persons not directly involved with the lift from the lifting zone
Risk assessment
5% 5%
13 CDA_LSSC
S/N
Learning Objectives Topic Sub-topic
Cognitive Domain of Bloom’s Taxonomy
Total Knowledge &
Comprehension Application
Analysis, Synthesis & Evaluation
4
Coordinate and supervise lifting operations involving mobile cranes in a safe and efficient way based on lifting plan
Safe Use of Mobile Cranes 1
SS 536 : 2008 Code of Practice for the Safe Use of Mobile Cranes
Types and configurations
Principles of operations
Characteristics of crane
Tandem lifting in mobile crane
Supervision of lifting operation for truck-mounted crane, crawler crane and lorry loader
5% 5% 10%
Safe Use of Mobile Cranes 2
Site preparation
Outrigger use
Operating procedures
Inspection and maintenance
5% 5% 10%
5
Coordinate and supervise lifting operations involving tower cranes in a safe and efficient way based on lifting plan
Safe Use of Tower Cranes
SS 559 : 2010 Code of Practice for Safe Use of Tower Cranes
Checklist for Tower Crane Use
10% 10% 20%
6
Coordinate and supervise lifting operations involving other lifting machines in a safe and efficient way based on lifting plan
Safe Use of Other Lifting
Machines
CP 63 : 2005 Code of Practice for the Lifting of Persons in Work Platforms Suspended from Cranes
SS 497 : 2011 (Note: Focus on safe use and maintenance only)
Cranes (eg overhead travelling, gantry, jib/pillar, portable crane etc), excavator approved to be used as Lifting Machine, material handling machinery
Safety devices
5% 5% 10%
14 CDA_LSSC
Learning Objectives
Topic Sub-topic
Cognitive Domain of Bloom’s Taxonomy Total
Knowledge &
Comprehension
Application Analysis,
Synthesis & Evaluation
7 Ensure correct rigging methods
Basic
Rigging and Slinging Methods
Types of rigging equipment
Rigging and slinging guidelines
5% 5% 10%
8 Respond to lifting accident and emergencies
Lifting Accidents
and Emergency Response
Accident investigation and analysis process of lifting accidents
Preventive measures
Emergency response procedure
Case study on common hazards and causes of lifting accidents involving cranes
5% 5% 5% 15%
Total 55 40 5 100
Form of assessment Written Practical/Case Study/Role Play
15 CDA_LSSC
Annex B Lifting Supervisor Safety Course Course Reference Matrix
APPROVED TRAINING SYLLABUS
LIFTING SUPERVISOR SAFETY COURSE
Coverage of Course Contents – for ATP inputs (Note: Indicate clearly where the changes are made in accordance with the syllabus)
S/N Contents Remarks Duration (Hours)
Indicate slide number Eg. Slide #2.
Indicate mode of assessment, where applicable – Practical, Exercise, Test etc Eg. Practical, Q3
1 Legislation on Lifting Operation
Workplace Safety and Health Act
WSH (Construction) Regulations
WSH (Operation of Cranes) Regulations
LTA Regulations concerning Lifting Equipment
Codes of Practices
Safe Work Practices for Lifting Operations
Theory 3
2 Roles and Responsibilities of Personnel in Lifting Operation
Duties of Lifting Supervisor
Duties of Crane Operators
Duties of Riggers
Duties of Signalman
Examples for illustration
Theory 4
16 CDA_LSSC
APPROVED TRAINING SYLLABUS
LIFTING SUPERVISOR SAFETY COURSE
Coverage of Course Contents – for ATP inputs (Note: Indicate clearly where the changes are made in accordance with the syllabus)
S/N Contents Remarks Duration (Hours)
Indicate slide number Eg. Slide #2.
Indicate mode of assessment, where applicable – Practical, Exercise, Test etc Eg. Practical, Q3
3 Planning for Safe Lifting Operations
Lifting plan requirements
Permit-to-Work and safe work procedures
Interpretation of load charts and related terminologies
Proximity hazards and appropriate steps and measures to exclude persons not directly involved with the lift from the lifting zone
Risk Assessment
Theory
5
4 Safe Use of Mobile Cranes
SS536 : 2008 Code of Practice for the Safe Use of Mobile Cranes
Types and configurations
Principles of operations
Characteristics of crane
Tandem lifting in mobile crane
Supervision of lifting operation for truck-mounted crane, crawler crane and lorry loader
Site preparation
Outrigger use
Operating procedures
Inspection and maintenance
Theory 6
17 CDA_LSSC
APPROVED TRAINING SYLLABUS
LIFTING SUPERVISOR SAFETY COURSE
Coverage of Course Contents – for ATP inputs (Note: Indicate clearly where the changes are made in accordance with the syllabus)
S/N Contents Remarks Duration (Hours)
Indicate slide number Eg. Slide #2.
Indicate mode of assessment, where applicable – Practical, Exercise, Test etc Eg. Practical, Q3
5 Safe Use of Tower Cranes
SS559: 2010 Code of Practice for Safe Use of Tower Cranes
Checklist for Tower Crane Use
Theory 3
6 Safe Use of Other Lifting Machines
CP 63 : 2005 Code of Practice for the Lifting of Persons in Work Platforms Suspended from Cranes
SS 497 : 2011 (Note: Focus on safe use and maintenance only)
Cranes (eg overhead travelling, gantry, jib/pillar, portable crane etc), excavator approved to be used as Lifting Machine, material handling machinery
Safety devices
Theory 3
18 CDA_LSSC
APPROVED TRAINING SYLLABUS
LIFTING SUPERVISOR SAFETY COURSE
Coverage of Course Contents – for ATP inputs (Note: Indicate clearly where the changes are made in accordance with the syllabus)
S/N Contents Remarks Duration (Hours)
Indicate slide number Eg. Slide #2.
Indicate mode of assessment, where applicable – Practical, Exercise, Test etc Eg. Practical, Q3
7 Basic Rigging and Slinging Methods
Types of rigging equipment
Rigging guidelines
2
8 Lifting Accidents and Emergency Response
Accident investigation and analysis
process
Preventive measures
Emergency response procedure
Case study on common hazards and
causes of lifting accidents involving
crane
3
19 CDA_LSSC
APPROVED TRAINING SYLLABUS
LIFTING SUPERVISOR SAFETY COURSE
Coverage of Course Contents – for ATP inputs (Note: Indicate clearly where the changes are made in accordance with the syllabus)
S/N Contents Remarks Duration (Hours)
Indicate slide number Eg. Slide #2.
Indicate mode of assessment, where applicable – Practical, Exercise, Test etc Eg. Practical, Q3
9 Assessment
Written Test and Practical
Performance / Role play / Case study
3
Total 32
Declaration by ATP I hereby declare that all the training materials and related particulars / information given are true and correct. ________________ _________________ ______________________ ___________________ __________ Name of ATP Name of Applicant Designation of Applicant Applicant’s Signature Date
_______________________ ____________ Head/Principal’s Signature Date
20 CDA_LSSC
Annex C
Lifting Supervisor Safety Course
SAMPLE
ASSESSMENT
PLAN
21 CDA_LSSC
Annex C Version Control Record
Version Effective
Date Changes
Prepared by (Name and
Designation)
Name of ATP
1.0 01 Aug 2010
N.A. due to first issue Mike Lee, Training Executive
ABC Consultancy
2.0 01 Nov 2011
Contents provided for Sample Assessment Plan
Mike Lee, Training Executive
ABC Consultancy
Date of next review: 30 October 2013
22 CDA_LSSC
CONTENTS Page
1 Purpose of assessment
2 Assessment Plan
3.1 Assessment tools and duration 3.2 Learning objectives to be assessed
3 Assessment Instructions,guidelines and other requirements
4.1 Instructions for assessor 4.2 Guidelines for conduct of assessment 4.3 Requirements of assessor 4.4 Evidence sources for the conduct of assessment 4.5 Recording and reporting of assessment outcome
4 Assessment Record 5 Assessment Instruments – Samples of test papers and solutions
23 CDA_LSSC
1 Purpose of assessment
The assessment ensures the individuals are equipped with the competencies to supervise the lifting operation safely and competently involving mobile crane or tower crane or any other crane in the workplace. 2 Certification & Passing Criteria A Certificate of Successful Completion (CSC) will be awarded to a trainee who has
completed the course and meets the necessary requirements:
• Attain at least 75% attendance during the training course
• Undertake the assessment and end of course examination
• Achieve 60% mark in the written test and 100% Practical Performance
3 Assessment Plan 3.1 Assessment method and duration
S/N Assessment Instrument Duration
1
Written Test WT This is a theory test paper with 80 MCQs comprising: Section A (85 marks):
55 MCQ (1 mark each) on roles and duties of lifting personnel, legislations, safe work practices and other topics as in syllabus. 10 MCQ (1 mark each) related to Rigger and Signalman (R&S) 10 MCQ (2 marks each) related to Lifting Plan and its requirements under the topic Planning for Safe Lifting Operations. Pass Criteria – 65% Section B (15 marks): 5 MCQ (3 marks each) on load chart interpretation related areas under the topic Planning for Safe Lifting Operations Pass criteria - 100%
Note: All trainees need to satisfy Pass Criteria for Section A and Section B to be considered to have achieved a Pass in the WT
2 hours
24 CDA_LSSC
S/N Assessment Instrument Duration
2 Practical Performance/ Role Play/ Case Study (PP/RP/CS) This is an interaction session for discussion and participation by trainees to demonstrate the skills and knowledge based on ‘show-and-tell’ technique. Pass Criteria: 65%(RP/CS); Pass Criteria: Competent (PP)
1 hour
Total
3 hours
25 CDA_LSSC
3.2 Learning objectives to be assessed
Learning Objective
Assessment Method
Describe legislative requirements for safe lifting operation
WT
List the duties of personnel involved in lifting operation
WT
Comply with safe work procedure and planning for safe lifting
WT & PP/RP/CS
Coordinate and supervise lifting operations involving mobile cranes in a safe and efficient way based on lifting plan
WT & PP/RP/CS
Coordinate and supervise lifting operations involving tower cranes in a safe and efficient way based on lifting plan
WT & PP/RP/CS
Coordinate and supervise lifting operations involving other lifting machines in a safe and efficient way based on lifting plan
WT & PP/RP/CS
Ensure correct rigging methods
WT & PP/RP/CS
Respond to lifting accident and emergencies
WT & PP/RP/CS
WT: Written Test PP: Practical Performance RP: Role Play CS: Case Study
26 CDA_LSSC
4 Assessment Instructions, Guidelines and Other Requirements
4.1 Instruction for Assessor
For Written Test, Assessor should: a) Explain the test format and pass mark to the trainees b) Issue the test question papers to trainees on the day of test; c) Mark the test answer sheets after the test; d) Submit the duly marked test answer sheets to office for checking and signing; d) Record test results on appropriate results summary sheet; f) Proceed to conduct practical test where applicable, and submit the results summary sheet to office promptly.
For Practical Performance, Role Play and Case Study, Assessor should: a) Explain the test format, pass criteria and other practical instructions (for Practical Performance) in accordance with lifting plan to the trainees b) Prepare the test materials; c) Conduct practical test on the scheduled date, time and venue; d) Record test results on appropriate results summary sheet; e) Submit the results summary sheet to office promptly.
27 CDA_LSSC
4.2 Guidelines for conduct of assessments 4.2.1 Written Test These instructions concern the conduct of written test to assess the trainee’s competence
Specification Item Details on Specification
Learning Objective As listed in para 3.2 and extracted from the Table of Specifications
Duration 2 hours
Venue Classroom
Set Up 1. Setup for 30 trainees (max). 2. Table & chair for individual seating. 3. Projector & monitor. 4. Whiteboard & markers of different colours. 5. Whiteboard duster. 6. Blue or black pens. 7. A4 papers. 8. Test papers. 9. Answer sheet.
Conduct of the Written Test
1. Brief trainees to check whether all of them have the correct test paper with 80 MCQs.
2. Inform trainees on the time given for the test. 3. Remind them it is closed book test. Trainees cannot refer
to any Workbook or discuss among themselves. 4. Trainees are allowed to ask the Assessor to explain the
question for clarification, if any. 5. Trainees must achieve the pass criteria in the paper to be
considered competent.
Recording the Assessment Result
1. Record findings and conclusions in the Assessment Record for Written Test under “Comments” column of the Assessment Record.
2. Record final marks attained.
Feedback 1. Inform and advise trainee on weaknesses and how to overcome such weaknesses.
2. Inform trainee on the final results of the assessment.
28 CDA_LSSC
Practical Performance/Role Play/Case Study (PP/RP/CS) The following table serves as a guide to assess trainees through practical performance/ role play / case study to verify the trainees’ competency. (Note: ATP to fill in the information that is deemed required and to further add-on instructional guidelines when necessary).
Specification Item Details on Specification
Learning Objective
Duration 1 hour
Venue
Set Up
Conduct of the Practical Performance/ Role Play/ Case Study
Recording the Assessment Result
1. Record findings and conclusions in the Assessment Record under “Comments’ column.
2. Record any questions asked and the responses given. 3. Record final marks attained.
Feedback 1. Inform and advise trainee on weaknesses and how to overcome such weaknesses.
2. Inform trainee on the final results of the assessment.
4.3 Requirements of Assessor
Assessments can only be carried out by approved assessors for this unit. The approved assessors must have the following qualifications: - Successfully completed the Rigger course, Signalman course and Lifting
Supervisor Safety Course - WSQ Specialist Diploma in WSH qualification or equivalent; and - At least 5 years relevant working experience; and - Advanced Certificate in Training and Assessment (ACTA) qualification or
equivalent
29 CDA_LSSC
4.4 Evidence sources for the conduct of Assessment Assessment must be conducted strictly in accordance with the assessment plan. In particular, each trainee must complete all the assessment requirements in the time allocated. A judgment on the competency of the trainee must only be made based on the evidence gathered. The evidence include written test and practical performance/role play/case study results as well as observation during assessment and assessment record. Note: For practical performance assessment, ensure all safety procedures are complied. 4.5 Recording and reporting of assessment outcome All assessment outcomes must be accurately recorded in the assessment record form (see paragraph 5). Assessment outcome will be communicated to the trainee at the end of the assessment. The ATP shall maintain a record of the assessment outcome and related documents for each trainee for at least 2 years for audit by MOM.
30 CDA_LSSC
5 Assessment Record
Following the assessed learning objectives, the outcome is summarised in the assessment record as follows:
Lifting Supervisor Safety Course
Name of ATP:
Trainee Name: (As in NRIC/FIN)
NRIC/FIN: Date of Assessment:
Learning Objectives
Tick appropriate assessment tool(s)
Comments
PP/RP/CS
WT
WT: Written Test - Pass Criteria: 65% (Section A); Pass Criteria: 100% (Section B) PP/RP/CS: Practical Performance/Role Play/Case Study - Pass Criteria: 65% (RP/CS); Pass Criteria: Competent (PP)
31 CDA_LSSC
Overall assessment The trainee has been assessed as (tick appropriate box): Pass Fail _________________________________ Assessor’s Signature Name: ___________________________
Date: ____________________________ Feedback on assessment outcome by Assessor
32 CDA_LSSC
6 Assessment Instruments
- ATP to insert relevant assessment/test papers and the solutions –