PAUL A CARTWRIGHT

44 High Street, Wolviston Village, Billingham, TS22 5JX, UNITED KINGDOM | 01740 645731 / 07971970130 | cartwright210@btinternet.com

GENERAL

During my working career I have gained experience in many aspects of Process Operations, and training within the Chemical Industry. I have worked as part of both large and small commissioning teams. Working as an Operator, and at Supervisory levels, assisting and co-ordinating shutdown, commissioning, and then start up of both existing and new plant. In my role as Shift Manager I liaised with engineers, and contractors and was responsible for the issuing of permits I.e., General, Hot Work, Entry Confined, Excavation, and Radiation Permits. (Nucleonic Sources) I have also been involved in HAZOP studies, and many Health and Safety at work courses, (Some of which are listed below). As well as the operational and commissioning side of the industry, I have also been involved with classroom, and on the job training of trainee, and graded operators, and was also responsible for interviewing and recruitment of new staff.

TRAINING

Incident Control/Emergency Response, Fire Fighting/Breathing Apparatus. H.E.L.M, Fork Lift Truck Operations, D32/D33 Assessor Trained, PTW, COSH, COMAH, SUSA and City & Guilds pts 1&2 in Process Science.

EDUCATIONNorthfield Comprehensive School CSEs: EnglishMathematicsScienceEnvironmental ScienceGeographyArtWoodwork

FURTHER EDUCATION

Stockton & Billingham Technical College O Levels:ArtPsychology

PAUL A CARTWRIGHT PAGE 2

HOBBIES/INTERESTS SquashCourse FishingSupporting Middlesbrough FCHorology (Watches)Tending my Allotment

PROFESSIONAL EXPERIENCEGrade 3 Process Operator, progressing to Shift ManagerDegussa SK (Formerly Laporte Industries & Fine Organics Ltd) Seal Sands, Middlesbrough, U.K

June 1991 – Sept 2003

Initially working as a Process Operator on a batch processing plant, setting up and monitoring distillations within reactor columns. Other operations included control room panel work, assisting with plant/process changeover, carrying out analytical work within the lab, and general plant operations gaining a sound knowledge of chemicals, solvents and gases. Progressing to Shift Manager where my responsibilities included the supervision of a 19 man team, ensuring manning levels were correct and Health & Safety regulations were not breached by use of Hazard & Risk Assessments, and permit to Work procedures. Other responsibilities included supervising any outside contractors that may be working on the site at any given time carrying out maintenance or calibration work.

Lead Operator Oct 2003 – Aug 2006AMPCO, Equatorial Guinea

Working on a Methanol Plant, and carrying out day to day running of the plant, monitoring distillations in the field and control room panel work. Supervising of Field Operations and Contractors using PTW Procedures.

PAUL A CARTWRIGHT PAGE 3

Start-Up Engineer, Area Supervisor, Turnaround/Permit Co-ordinator Dec 2006 – June 2009Dolphin Energy Ltd, Ras Laffan Industrial City, State of Qatar

Predominantly working outside ensuring that all the instructions for commissioning and startup of all units on the 2.2bef Dolphin Energy gas processing plant were followed and planned goals and objectives were achieved safely and on time. Liaising with numerous vendors and contractors in trouble shooting startup problems. After successful startup of the plant, I was transferred to a small group, of 6 people who prepared and planned all aspects of the warranty shutdown. During the warranty shutdown, I worked as a senior permit controller and area authority, controlling the issuance and preparation of all permits related to the fractionation and LPG treatment units. (Cold, Hot, Naked Flame, Entry Confined, Vehicle Entry, Energy Isolation and High Pressure Leak Testing).

Production Technician Oct 2009 – Present Maersk Oil, Janice Alpha FPU Off shore, North Sea

Employed with Petrofac and then Maersk Oil as a Production Technician, where my duties would include – Isolation of Plant/Equipment for maintenance to be carried out, preparation of all paperwork including PTW, marked-up P&IDs, Method Statements etc., which allow the above to be carried out in a safe manner. I have on numerous occasions acted as Stand-in Lead Technician, due to sickness cover or other, and have also been trained up in the Control Room as cover for the CRO. Other training includes being signed off as a competent Permit Co-ordinator, where I have stood in on many occasions, including the whole of the 2013 Shutdown.

PAUL A CARTWRIGHT PAGE 4

FOOT NOTESFor Referees you can contact the following people:

Andrew Adcock, Graham Powell or David Barbour (Production Supervisors)All Maersk Oil & Gas UK

Joseph Bierebeeck, Peter Hardy (Production Operations Managers), Trevor Probert or James Collins (Process Superintendents) All Dolphin Energy Ltd

AMPCO contact James Collins (Production Supervisor)

Degussa SK Ltd contact either: Keith Hansen (Plant Manager) or Luke Bingham (Building Manager)