curriculum vitae - departamento de engenharia civilisise/ · produced by an innovative vacuum...

Thursday, 07-32-2011 :: 16:32

PT EN

Overview Edit CV

Joaquim Antonio Oliveira BarrosEnd session

Overview

1. Personal data

Full Name

Joaquim António Oliveira de Barros

Name under which you publish

Fiscal ID number

148798268

ID document

5788706

Birth date

01-10-1962

National of

Portugal

Gender

M

Work address

Universidade do Minho Departamento de Engª Civil da Escola de Engª da Universidade do Minho. Campus de Azurém 4800-058 Guimarães Portugal

Residential Address

Rua Visconde de Ovar, 125 3880-272 OVAR Portugal

Work Phone

256383073

Residential Phone

253510200

Email

[email protected]

Fax

253510217

Cell phone

918786801

URL

www.civil.uminho.pt

2. Academic degrees

Year: 1996

Degree: DOUTORAMENTO

Final grade: Distinção e Louvor por unanimidade / summa cum laude

Degree granting institution Universidade do Porto

School/College/Campus Faculdade de Engenharia

Thesis title Comportamento do betão reforçado com fibras - análise experimental e simulação numérica / Behaviour of fibre reinforced concrete – experimental analysis and numerical simulation

Supervisor: Prof. Joaquim Azevedo Figueiras

Co-supervisor:

Scientific area Engenharia Civil / Civil Engineering

Curriculum vitae

of 18FCT::SIG Curriculum Vitae

07/07/2011http://www.fct.mctes.pt/fctsig/cv/presentation.en/overview.aspx

Program title Engenharia Civil / Civil Engineering

Year: 1988

Degree: MESTRADO

Final grade: Muito bom por unanimidade / very good



Thesis title Modelos de análise de estruturas laminares e de compósitos laminados / Numerical models for the structural analysis of laminar structures and composite laminates

Supervisor:

Co-supervisor:

Scientific area Engenharia Civil / Civil Engineering

Number of curricular years 2

Program title Engenharia Civil - opção de estruturas / Civil Engineering - option of structures

Year: 1985

Degree: LICENCIATURA

Final grade: 15 valores / 15 values



Thesis title -

Supervisor:

Co-supervisor:

Scientific area Engenharia Civil

Number of curricular years 5

Program title Engenharia Cil - opção de estruturas

Year: 2006

Degree: AGREGAÇÃO

Final grade: Aprovação por unanimidade

Degree granting institution Universidade do Minho

School/College/Campus Other

Thesis title Materiais compósitos no reforço de estruturas de betão

Supervisor:

Co-supervisor:

Scientific area Engenharia Civil

Program title Engenharia Civil

3. Previous activity and current status Período Cargo, categoria ou actividade Instituição

15-9-1986 a 30-9-1988

Assistant researcher in training of the Physics Department Beira Interior University

01-10-1988 a 17-3-1996

Assistant researcher of the Department of Civil Engineering of Minho Minho University

18-3-1996 a 12-12-2004 Assistant Professor of the Department of Civil Engineering Minho University

a Director of the Laboratory of the Structural Division of the Department of Civil Engineering

Minho University

13-12-2004 a 24-7-2006

Associate Professor of the Department of Civil Engineering Minho University

a Deputy of the Civil Engineering Researcher Center Minho University



25-7-2006 a Associate Professor with Aggregation of the Department of Civil Engineering

Minho University

4. Area of scientific activityStructural rehabilitation; Characterization of materials of cement and polymeric matrix by experimental research, mainly, fiber reinforced concrete and concrete structures strengthened with composite materials; Numerical models based on the finite element techniques for material and geometric nonlinear analysis of concrete structures.

5. Present research interest

Domain of specialization

Finite element based constitutive models for the material nonlinear analysis of structures of cement based matrix materials and polymeric based matrix materials. Experimental research for the characterization of the behaviour of materials and structures.

Current research interests

Experimental research to characterize the behaviour of cement based materials, mainly fibre reinforced concrete, fibre reinforced self-compacting concrete and engineering cement composites; Numerical models for the material and geometrical nonlinear analysis of concrete structures and structures strengthened by composite materials; Structural rehabilitation; Non-destructive tests; Engineered cement composites

Other professional interests/activities

Collaboration on the development of servo-controlled systems for testing materials and structural elements; Modelling the soil-structure interaction; Nonlinear analysis of structures of pure composite materials by finite element method. Software for the pre-processing data and post-processing results in the ambit of structural analysis based on the finite element method.

6. Experience as scientific adviserSupervisor of 2 Pos-Doc, 24 PhD Students and 29 MSc Students on the domains of experimental and numerical simulation of concrete structures and structures strengthened with composite materials. Supervisor of 28 reserachers in the scope of research projects.

7. Participation in R&D projects

Participação em projectos de investigação (coordenador/membro de equipas)



Title: PrePAM –Pre-fabricated thin panels using advanced materials for structural rehabilitation Reference: PTDC/ECM/114511/2009 Coordinator: Joaquim A. O. Barros Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: Excelent Financial support: 181.286,00€ Promoting Institution(s): University of Minho Partner Institutions: - Period: 01/04/2011 a 31/03/2014 Objectives: i) development of a high effective and cost competitive strengthening technique that can increase effectively the flexural and the shear strengthening of RC frames, as well as the energy dissipation capacity of this type of structural elements; ii) development of a guideline for the design and execution of this technique; iii) formation of two young scientists, one dedicated to ECC materials, from the development to the material characterization and application, and the other prepared, mainly, for the development of numerical tools. Title: RehabGFRP - Rehabilitation of Building Floors with Lightweight High Performance GFRP Sandwich Panels Reference: PTDC/ECM/113041/2009 Coordinator: Fernando António Baptista Branco (Joaquim A. O. Barros collaborated in the elaboration of the proposal) Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: Excelent Financial support: 181.286,00€ (79.933,93€ for ISISE) Promoting Institution(s): IST Partner Institutions: University of Minho Period: 01/03/2011 a 28/02/2014 Objectives: This project addresses the development of innovative glass fibre reinforced polymer (GFRP) sandwich panels for the replacement of degraded building floors, providing an easy solution for their rehabilitation. Prototypes of GFRP and hybrid GFRP-ECC (engineered cementitious composites) sandwich panels will be produced by an innovative vacuum infusion (VI) process, allowing to study their mechanical behaviour, as well as their thermal and acoustic performance. Title: PRELAMI - Performance of reinforced concrete structures strengthened in flexural with an innovative system using prestressed NSM CFRP laminates Reference: PTDC/ECM/114945/2009 Coordinator: Salvador José Esteves Dias (Joaquim A. O. Barros collaborated in the elaboration of the proposal) Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: Very Good Financial support: 178.674,00€ Promoting Institution(s): University of Minho Partner Institutions: - Period: 01/04/2011 a 31/03/2014 Objectives: In the present research project it will be assessed the performance of Reinforced Concrete (RC) structures (beams and slabs) strengthened in flexure using an innovative system with Carbon Fibre Reinforced Polymer (CFRP) laminates. This system is based on the application of CFRP laminates with a certain pre-stress into thin slits open on the concrete cover of the structural elements to strengthen. The present project intends to develop a strengthening system, economically and technically viable, that assures the optimal use of durable and high strength materials (CFRP) in order to significantly improve the overall performance of the strengthened RC structures. Title: CutInDur - Long-term structural and durability performance of concrete elements strengthened with the NSM technique Reference: PTDC/ECM/112396/2009 Coordinator: José Manuel Sena Cruz (Joaquim A. O. Barros collaborated in the elaboration of the proposal) Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: Very Good Financial support: 157.498,00€ Promoting Institution(s): University of Minho Partner Institutions: - Period: 01/07/2011 a 30/06/2014 Objectives: The main objective of present research project is to contribute to the knowledge on durability performance of the NSM technique with CFRP laminates under various specific application environments, load conditions and chemical degradation. Title: SelCo - Service life behaviour of concrete structures: a multiphysics approach Reference: PTDC/ECM/099259/2008 Coordinator: Joaquim A. O. Barros (Miguel A. D. Azenha collaborated in the elaboration of the proposal) Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: 87/100 Financial support: 159.213,00€, and 66.554,00 to UM Promoting Institution(s): FEUP Partner Institutions: UM Period: 01/06/2010 a 31/05/2013 Objectives: The final goal of this project is the establishment of an integrated methodology for the numerical simulation of the behaviour of concrete structures under realistic service conditions (both in terms of environmental interactions and applied loads) with recourse to a thermo-hygro-mechanical numerical model. This numerical framework will be duly supported on advanced experimental methods for material characterization. Title: DURCOST - Innovation in reinforcing systems for sustainable pre-fabricated structures of higher durability and enhanced structural performance Reference: PTDC/ECM/105700/2008 Coordinator: Joaquim A. O. Barros Research Centre: ISISE Financing Institution(s): FCT Result of the avaliation: - Financial support: 199.234,00€ Promoting Institution(s): - Partner Institutions: - Period: 14/06/2010-13/06/2013 Objectives: In the present project high effective new reinforcing systems for the pre-fabrication of concrete structures of larger life cycle will be developed, combining FRP and steel bars. Title: LEGOUSE - Development of cost competitive pre-fabricated modular buildings Reference: QREN – Project nº 5387 Coordinator: Joaquim A. O. Barros Research Centre: ISISE Financing Institution(s): ADI



Result of the avaliation: - Financial support: Mota-Engil: 348 132.13€; Civitest: 209 065.45€; UM: 382 161.72€; PIEP: 128 941.95€ (a total amount of investment of: 1 895 350.83€) Promoting Institution(s): Mota-Engil Partner Institutions: Mota-Engil, Civitest and PIEP Period: 15/09/2009 a 14/09/2012 Objectives: The present project aims to take advantage of the appropriate use of advanced materials and computational tools in the concept phase, design and construction of modular housing with competitive costs. Title: PONTALUMIS - Development of a prototype of a pedistrian bridge in GFRP-ECC concept Reference: QREN – Project nº 3456 Coordinator: Joaquim A. O. Barros Research Centre: ISISE Financing Institution(s): ADI Result of the avaliation: - Financial support: 165 834.00€ for UM (a total amount of investment of: 1 386 177.68€) Promoting Institution(s): ALTO Partner Institutions: UM and IST Period: 10/12/2008 a 09/12/2012 Objectives: The objective of this project is to develop a prototype of a pedestrian bridge to be installed over any type of transportation axes. Title: CUTINEMO - Carbon fiber laminates applied according to the near surface mounted technique to increase the flexural resistance to negative moments of continuous reinforced concrete structures Reference: PTDC/ECM/73099/2006 Coordinator: Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): FCT Result of the avaliation: Very Good Financial support: 170 000€ Promoting Institution(s): University of Minho Partner Institutions: - Period: 01/01/2008 a 30/06/2010 Objectives: The main objective of the present project is the development of a document based on experimental, analytical and numerical research that includes the necessary information to design a strengthening system based on the use of CFRP laminates, applied according to the NSM technique, for the increase of the resistant negative bending moment of continuous RC slabs and beams, taking into account the desired level of moment redistribution capacity, the characteristics of the existent reinforcement arrangement and the properties of the concrete. The formation of two scientists, one in the experimental research domain and the other in the analytical and computational mechanical domains are also important objectives. Technology transfer I&D-industry is also another objective. For this purpose a company will participate in the strengthening procedures of the RC structures to strength. The results obtained from this research will be available for eventual use in the ambit of the guidelines developed by fib TG 9.3. Title: Seismic repair and strengthening reinforced concrete beam-column joints with multidirectional CFRP laminates Reference: PTDC/ECM/74337/2006 Coordinator: José M. Sena Cruz (Joaquim Barros collaboratedin the elaboration of the proposal) Research Centre: Civil Eng. of Minho University Financing Institution(s): FCT Result of the avaliation: Very Good Financial support: 129 000€ Promoting Institution(s): University of Minho Partner Institutions: - Period: 01/01/2008 a 31/12/2010 Objectives: The main objectives of the present project are the: (a) development of a technique to repair and to strength RC beam-column joints with multidirectional CFRP laminates under seismic loading; (b) experimental characterization of bond between multidirectional CFRP laminates and the concrete under monotonic and cyclic loading; (c) experimental characterization of RC beam-column joints strengthened with multidirectional CFRP laminates under cyclic loading; (d) development of numerical models for the simulation of bond multidirectional CFRP laminates and the concrete under monotonic and cyclic loading; (e) development of numerical models for the simulation of RC beam-column joints strengthened with multidirectional CFRP laminates under cyclic loading; (f) development of design recommendations for the application of the repair and strengthening of RC beam-column joints with multidirectional CFRP laminates under seismic loading. Title: SMARTREINFORCEMENT – Carbon fibre laminates for the strengthening and monitoring of reinforced concrete structures Reference: Coordinator: Francisco Araújo e Joaquim A.O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): POCI 2010 – IDEIA Result of the avaliation: - Financial support: 202.063,33 € Promoting Institution(s): FiberSensing Partner Institutions: FiberSensing and University of Minho Period: 07/07 to 07/08 Objectives: Manufacture carbon fibre laminates that includes optical fiber sensors; characterize the early and long term behaviour of these laminates, under distinct ageing conditions; evaluate the bond conditions of these laminates to the concrete substrate, when applied according to the NSM strengthening technique; assess the performance of these laminates when applied for the flexural and shear strengthening; implement into the FEMIX computer program the necessary routines to simulate the constructive phases of the strengthening process; develop design guidelines for the shear and flexural strengthening of RC structures using this type of laminates. Title: PABERPRO - Conception and implementation of a system for the production of lightweight panels of steel fibre reinforced self-compacting concrete Reference: Project nº 13-05-04-FDR-00007, contract reference ADI/2007/V4.1/0049 Coordinator: Joaquim A.O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): POCI 2010 – IDEIA Result of the avaliation: - Financial support: 185.668,32 € Promoting Institution(s):Prégaia, Society of Prefabrication, S.A. Partner Institutions: Prégaia, Sociedade de Pré-Fabricação, S.A.; Civitest pesquisa de novos materiais para a Engª Civil; University of Minho Period: 07/06 to 07/08 Objectives: Develop a system for industrialized production of lightweight panels of steel fibre reinforced self-compacting concrete; characterize the durability properties of the developed SFRSCC; develop a user friend software for the design of SFRSCC panels submitted to the load combinations according to the most recent code recommendations. Develop guidelines for the design of SFRSCC panels for building façades. Title: FICOFIRE - High performance fiber reinforced concrete of enhanced fire resistance Reference: POCI/ECM/57518/2004



Coordinator(s): Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): FCT Result of the avaliation: Excelent Financial support: 90000€ Promoting Institution(s): UM Partner Institutions: Coimbra University Period: 03/2005 to 03/2007 Objectives: Develop a Fibrous Concrete of 50-70 MPa compressive strength, of Enhanced Fire Resistance and high ductility (FRCEFR). Distinct types of fibers will be used. One type has very low degree of polymerization, which in presence of a very high temperature will sublime. Cellulose fibers with fire retardants products which, in presence of very high temperature, will be transformed, by pyrolise, into carbon, shrinking, is an alternative solution. Both types of fibers, under the action of fire will create a network of micro channels for the escape of the water vapor. These types of fibers have also the purpose of decrease the crack propagation during the concrete plastic shrinkage phase. The other type of fiber has the purpose of providing high ductility for the concrete post-cracking behavior. For the alveolar concrete slab application the FRCEFR has also the purpose of being possible the production of slabs of larger span and thickness without the use of steel stirrups. In the swells for tunnel application, the FRCEFR should replace totally the conventional reinforcement. Title: CUTINSHEAR - Performance assessment of an innovative structural FRP strengthening technique using an integrated system based on optical fibre sensors Reference: POCI/ECM/57518/2004 Coordinator(s): Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): FCT Result of the avaliation: Excelent Financial support: 90000€ Promoting Institution(s): UM Partner Institutions: INESC Period: 03/2005 to 03/2007 Objectives: Develop a novel shear strengthening technique using laminates of CFRP, which, in comparison to the existent CFRP-based shear strengthening techniques, is simpler and faster to apply and is more efficacy in terms of provide higher increase of beam load carrying capacity and deflection at beam ultimate load; Develop equipment for saw-cutting the slits where the CFRP laminates will be bonded by epoxy adhesive. This equipment should allow cutting slits of regulated width and deepness, and desired longitude; Develop a unit control and acquisition system for measuring the strains in the CFRP laminates using optical fibers. These sensors will introduce marginal interference in the CFRP-concrete bond conditions. This device will be implemented into a servo-loop system to assure stable tests, controlling the test by the signal registered in the optical fiber sensors; Develop design guidelines for this shear strengthening technique; Title: PABERFIA – Lightweight Sandwich Panels of Steel Fiber Reinforced Self Compacting Concrete Reference: PABERFIA Coordinator(s): Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): ADI Result of the avaliation: - Financial support: 110.242,06 € Promoting Institution(s): Prégaia, Sociedade de Pré-Fabricação, S.A. Partner Institutions: Prégaia, Sociedade de Pré-Fabricação, S.A.; Civitest pesquisa de novos materiais para a Engª Civil Period: 01/2003 to 07/2005 Objectives: Develop a cost competitive steel fiber reinforced self compacting concrete (SFRSCC) for industrial applications (in façade panels); Characterize the concrete and the bending behavior of SFRSCC by experimental tests; Cost analysis of traditional and SFRSCC solutions; Assess the structural behavior by tests in real scale. Title: ISOBRICK – Industrialised solutions for construction of reinforced brick masonry shell roofs Reference: CRAF-1999-70420 Coordinator(s): Paulo B. Lourenço and Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): Supported by the European Commission under the 5th framework programme Result of the avaliation: - Financial support: 243.000 € Promoting Institution(s): Suceram (SME) Partner Institutions: 6 industrial companies, Technical University of Catalonia, SPAIN University of Minho Universita' degli Studi di Padova, ITALY University of Berlin, GERMANY Period: November 2001 to July 2004 Objectives: Traditional construction made use of bricks in arches and vaults leading to slender, light and ingenious solutions whose strength was guaranteed by the curved shape. The objective of the current project was to update the old roofing techniques (deeply rooted into the European tradition) to the present situation. Envisaged solutions are short to mid-span thin vaulted roofs made with reinforced brick masonry. Innovations are: industrialization, only light formwork requiring (cheaper and faster construction), broad testing, numerical modeling of the structural behavior (to allow for rationally-based design) and design guidelines. Main advantages sought, when compared to competing techniques: cheaper, eco-efficient, fitting architecture trends, better structural behavior, nice looking and ageing, long-lasting and virtually maintenance-free. Title: Cost competitive steel fibre reinforced concrete for industrial pavements Reference: POCTI/ECM/34793/2000 Coordinator(s): Joaquim A. O. Barros Research Centre: Civil Eng. of Minho University Financing Institution(s): FCT Result of the avaliation: - Financial support: 45000€ Promoting Institution(s): UM Partner Institutions: INESC Period: 09/2000 to 09/2003 Objectives: Develop a cost competitive steel fiber reinforced concrete (SFRC) for industrial pavement applications; Characterize the concrete and the bending behavior of SFRC by experimental tests; Cost analysis of traditional and SFRC solutions; Assess the structural behavior by tests in real scale; Develop numerical models to analyze SFRC industrial pavements and setup design guidelines for this application. Investigator in 10 research projects:

8. Prizes and awards receivedYear Name of the prize or award Promoting entity

2005 “Centro de Solidariedade de Braga”, project proposed for the Prize SECIL Enginnering 2005 SECIL

9. Published works



Teses Barros, J.A.O., “Behaviour of fibre reinforced concrete – experimental analysis and numerical simulation”, PhD Thesis, Dep. Civil Eng., Faculty of Eng. of Oporto University, 502 p, December 1995. Barros, J.A.O., “Numerical models for the structural analysis of laminar structures and composite laminates”, MSc Thesis, Dep. Civil Eng., Faculty of Eng. of Oporto University,, 323 p, October 1989. Capítulos de livros 5. Barros, J.A.O., "Steel fibre reinforced concrete: Material properties and structural applications", Fibrous and composite materials for civil engineering applications, Edited by R. Fangueiro, Woodhead publishing, ISBN 978-1-84569-558-3 (print), 95-153, 2011. 4. Banthia, N. et al., "Report on the Physical Properties and Durability of Fiber-Reinforced Concrete", ACI 544.5R-10, Reported by ACI Committee 544, March 2010. 3. Banthia, N. et al., "Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete", ACI 544.3R-08, Reported by ACI Committee 544, November 2008. 2. Barros, J.A.O., Pereira, E.N.B., Santos, S.P.F., Lourenço, L.A.P., "Possibilidades e desafios do betão auto compactável reforçado com fibras – do laboratório à aplicação real (Possibilities and challenges of the fibre reinforced self-compacting concrete)", Seminar “Inovação em betões e nova normalização de betões especiais (Innovation in concrete technology and new standards for special concretes)”, in the ambir of Construnor 2006, Braga Exhibition Park, 49-68, 21 September 2006. 1. Barros, J.A.O., “Caracterização do comportamento do betão reforçado com fibras de aço por intermédio de ensaios experimentais (Characterization of the behaviour of steel fibre reinforced concrete by experimental analysis)”, 1st Workshop of concrete structures, high performance concrete and new composites, Faculty of Eng. Oporto University, pp. 151-170, 18 October 1996. (in Portuguese) Livros (autor) 4. A.G. Correia and J.A.O. Barros, “Report on technical and scientific activities 2003-2005”,1st Workshop on civil engineering research, Minho University, Braga, Portugal, ISBN 972-8692-28-5 23-24 February 2006 (500 exemplars). 3. S.J.E. Dias and J.A.O. Barros, “Solved exercices of Structural Analysis II”, Eds S.J.E. Dias and J.A.O. Barros, ISBN 972-8692-18-8, 248 p, March 2005 (500 exemplars). (in Portuguese) 2. J.A.O. Barros, “Displacement method”, Ed. J.A.O. Barros, ISBN 972-8692-19-6, 301 pags., March 2005 (500 exemplars). (in Portuguese) 1. S.J.E. Dias and J.A.O. Barros, “Solved exercices of Structural Analysis I”, Eds. S.J.E. Dias and J.A.O. Barros, ISBN 972-8692-17-X, 170 p, (500 exemplars in 2004 and 500 exemplares in 2006). (in Portuguese) Artigos em revistas de circulação internacional com arbitragem científica 63 Bianco, V., Barros, J.A.O., Monti, G., “Three dimensional mechanical model to simulate the NSM FRP strips shear strength contribution to a RC beam: parametric studies in appretiation for eventual publication in the ASCE Structural Engineering Journal, 2010. 62 Breveglieri, M., Barros, J.A.O., Dalfré, G.M., Aprile, A., “A parametric study on the effectiveness of the NSM technique for the flexural strengthening of continuous RC slabs”, in appretiation for eventual publication in the Composites – part B: Engineering, 2011. 61 Alves, N.R.R.M.; Barros, J.A.O.; Nunes, A.M.J.S., “Steel Fibre reinforced Self-compacting concrete for grid foundationS of single-family houses”, in appretiation for eventual publication in the Cement and Concrete Composites Journal, 2011. 60 Sena-Cruz, J.M.; Barros, J.A.O.; Coelho, M., “Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading”, in appretiation for eventual publication in the Construction and Building Materials Journal, 2011. 59 Häßler, D., Barros, J.A.O., “Exploring the possibilities of fibre reinforced concrete for the flexural strengthening of ancient handmade brick based arch-type structures”, accepted to be published International Journal of Architectural Heritage Conservation, Analysis, and Restoration, 2011. 58 Taheri, M.; Barros, J.A.O.; Salehian, H.R., “A parametric study on the use of strain softening/hardening FRC for RC elements failing in bending”, in appretiation for eventual publication in the ASCE Materials in Civil Engineering Journal, 2011. 57 Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “A finite element model with discrete embedded elements for fibre reinforced composites”, in appretiation for eventual publication in the Computers and Structures Journal, 2011. 56 Dias, S.J.E.; Barros, J.A.O., “NSM shear strengthening technique with CFRP laminates applied in high-strength concrete beams with or without pre-cracking”, accepted to be puslished in the Composites – part B: Engineering, 2011. 55 Ventura-Gouveia, A., Barros, J.A.O., Azevedo, A.F.M., “Crack constitutive model for the prediction of punching failure modes of fiber reinforced concrete laminar structures”, accepted to be puslished in the Computers and Concrete Journal, 2011. 54 Mendes, J.D.; Barros, J.A.O.; Sena-Cruz, J.M.; Taheri, M., “Development of a pedestrian bridge with GFRP profiles and fibre reinforced self-compacting concrete deck”, Composite Structures Journal, 10.1016/j.compstruct.2011.05.005, 2011. 53 Taheri, M.; Barros, J.A.O.; Salehian, H.R., “A design model for strain-softening and strain-hardening fiber reinforced elements reinforced longitudinally with steel and FRP bars”, Composites - part B Journal, doi:10.1016/j.compositesb.2011.04.009, 2011. 52 Dias, S.J.E.; Barros, J.A.O., “Experimental behaviour of RC beams shear strengthened with NSM CFRP laminates”, Strain International Journal, doi: 10.1111/j.1475-1305.2010.00801.x, 2011. 51 Dalfré, G.M.; Barros, J.A.O., “Flexural strengthening of RC continuous slab strips using NSM CFRP laminates”, accepted to be published in the Advances in Structural Engineering Journal, 2011. 50 Dias, S.J.E.; Barros, J.A.O., “Shear strengthening of RC T-section beams with low concrete using NSM CFRP laminates”, Cement and Concrete Composites Journal, doi:10.1016/j.cemconcomp.2010.10.002, 2011. 49 Barros, J.A.O.; Costa, I. G.; Ventura-Gouveia, A., “CFRP flexural and shear strengthening technique for RC beams: Experimental and numericla research”, Advances in Structural Engineering Journal, 14(3), 559-581, 2011. 48 Bianco, V.; Monti, G.; Barros, J.A.O., “Theoretical model and computacional procedure to evaluate the NSM FRP strips shear strength contribution to a RC beam”, accepted to be published in the ASCE Structural Engineering Journal, 2011. 47 Lima, J.L.T., Barros, J.A.O., “Reliability analysis of shear strengthening EBR FRP models”, Structures and Buildings Journal, Volume 164(SB1), January, 2011. 46 Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “An integrated approach for modelling the tensile behaviour of steel fibre reinforced self-compacting concrete”, Cement and Concrete Research Journal, 41, 64-76, 2011. 45 Sena-Cruz, J.M.; Barros, J.A.O.; Coelho, M., “Bond Between Concrete and Multi-Directional CFRP Laminates”, Advanced Materials Research, Vols. 133-134, pp. 917-922, doi: 10.4028/www.scientific.net/AMR.133-134.917, Trans Tech Publications, Switzerland, 2010. 44 López-Almansa, F; Sarrablo, V.; Lourenço, P.B.; Barros, J.A.O.; Roca, P.; da Porto, F.; Modena, C., “Reinforced Brick-Masonry Light Vaults. Semi-Prefabrication, Construction, Testing and Numerical Modelling”, Construction and Building Materials Journal, 24, 1799-1814, 2010. 43 Costa, I.G., Barros, J.A.O., “Flexural and shear strengthening of RC beams with composites materials – the influence of cutting steel stirrups to install CFRP strips”, Cement and Concrete Composites Journal, 32, 544-553, 2010. 42 Bianco, V., Barros, J.A.O., Monti, G., “New approach for modeling the contribution of NSM FRP strips for shear strengthening of RC beams”, ASCE Composites for Construction Journal, 14(1), 36-48, January/February, 2010. 41 Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “An integrated approach for modelling the tensile behaviour of steel fibre reinforced self-compacting concrete”, Cement and Concrete Research Journal, 41, 64-



76, 2011. 40. Dias, S.J.E.; Barros, J.A.O., “Performance of reinforced concrete T beams strengthened in shear with NSM CFRP laminates”, Engineering and Structures Journal, in press, 2009, doi:10.1016/j.engstruct.2009.10.001. 39. Perrone, M., Barros, J.A.O., Aprile, A., “A CFRP-based strengthening technique to increase the flexural and energy dissipation capacities of RC columns”, ASCE Composites for Construction Journal, 13(5), 372-383, October 2009. 38. Sas, G.; Täljsten, B.; Barros, J.A.O.; Lima, J.L.T., Carolin, A., “Are available models reliable for predicting the FRP contribution to the shear resistance of RC beams?”, ASCE Composites for Construction Journal, 13(6), 514-534, December 2009. 37. Bianco, V., Barros, J.A.O., Monti, G., “Three dimensional mechanical model for simulating the NSM FRP strips shear strength contribution to RC beams”, Engineering and Structures Journal, 31(4), 815-826, April 2009. 36. Varma, R.K.; Barros, J.A.O.; Sena-Cruz, J.M., “Numerical model for CFRP-based confined concrete elements subjected to monotonic and cyclic loadings”, Composites Part B, 40(8), 766-775, December 2009. 35. Barros, J.A.O., Bianco, V., Monti, G., “NSM CFRP laminates for shear strengthening of RC beams: tests and mechanical model”, The Open Construction and Building Technology Journal, Volume 3, 12-32, 2009. 34. Bianco, V., Barros, J.A.O., Monti, G., “Bond model in the context of NSM CFRP shear strengthening of RC beams”, ASCE Journal of Structural Engineering Vol. 135, No. 6, June, 2009. 33. Barros, J.A.O.; Lourenço, L.A.P.; Varma, R.K.; Gonçalves, D. M.F., “Cost competitive steel fibre reinforced self-compacting concrete for structural applications”, The Indian Concrete Journal, 83(8), 14-26, August 2009. 32. Barros, J.A.O., Varma, R.K., Sena-Cruz, J.M., Azevedo, A.F.M., “Near surface mounted CFRP strips for the flexural strengthening of RC columns - experimental and numerical study”, Engineering and Structures Journal, 30(12), 3412-3425, December 2008. 31. Pereira, E.B.; Barros, J.A.O., Camões, A.F.F.L., “Steel fiber reinforced self-compacting concrete – experimental research and numerical simulation”, Journal of Structural Engineering, 134(8), 1310-1321, August 2008. 30. Santos, S.P.F.; Barros, J.A.O.; Lourenço, L.A.P., “Fibrous reinforcing system to increase the shear resistance of high strength concrete”, Materials Science Forum, Vols. 587-588, 887-891, online at http://www.scientific.net, Trans Tech Publications, Switzerland, 2008. 29. Cunha, M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Bond-slip mechanisms of hooked-end steel fibers in self-compacting concrete”, Materials Science Forum, Vols. 587-588, 877-881, online at http://www.scientific.net, Trans Tech Publications, Switzerland, 2008. 28. Dias, S.J.E.; Barros, J.A.O., “Shear strengthening of T cross section reinforced concrete beams by near surface mounted technique”, Journal of Composites for Construction, 12(3), 300-311, May/June, 2008. 27. Bonaldo, E.; Barros, J.A.O., Lourenço, P.J.B., “Efficient strengthening technique to increase the flexural resistance of existing RC slabs”, Journal of Composites for Construction 12(2), 149-159, March/April 2008. 26. Barros, J.A.O.; Ferreira, D.R.S.M., “Assessing the efficiency of CFRP discrete confinement systems for concrete column elements”, Journal of Composites for Construction 12(2), 134-148, March/April 2008. 25. Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Modelling the influence of age of steel fibre reinforced self – compacting concrete on its compressive behaviour”, RILEM Materials and Structures Journal, 41(3), 465-478, 2008. 24. Barros, J.A.O.; Lourenço, P.J.B.; Oliveira, J.T.; Bonaldo, E., “Experimental Characterization of a New Reinforced Brick Masonry Shell Structural System”, Structures and Buildings Journal, 160(SB6), 339-354, 2007. 23. Barros, J.A.O.; Dias, S.J.E.; Lima, J.L.T, “Efficacy of CFRP-based techniques for the flexural and shear strengthening of concrete beams”, Journal Cement and Concrete Composites, 29(3), 203-217, March 2007. 22. Barros, J.A.O.; Pereira, E.B.; Santos, S.P.F., “Lightweight panels of steel fiber reinforced self-compacting concrete”, Journal of Materials in Civil Engineering, 19(4), 295-304, 2007. 21. Sena-Cruz, J.M.; Barros, J.A.O.; Azevedo, A.F,M.; Gettu, R., “Bond behavior of near-surface mounted CFRP laminate strips under monotonic and cyclic loading”, Journal of Composites for Construction, 10(4), 295-303, Julho/Agosto 2006. 20. Barros, J.A.O.; Oliveira, J.T.; Lourenço, P.J.B.; Bonaldo, E., “Flexural behavior of reinforced masonry panels”, ACI Structural Journal, Vol. 13, No. 3, May-June, 418-426, 2006. 19. Barros, J.A.O.; Dias, S.J.E., “Near surface mounted CFRP laminates for shear strengthening of concrete beams”, Journal Cement and Concrete Composites, Vol. 28, N. 3, pp. 276-292, March 2006. 18. Barros, J.A.O.; Ferreira, D.R.S.M.; Fortes, A.S., Dias, S.J.E., “Assessing the effectiveness of embedding CFRP laminates in the near surface for structural strengthening”, Construction and Building Materials Journal, Vol. 20, pp. 478-491, 2006. 17. Dias, S.J.E.; Barros, J.A.O., “Experimental research of a new CFRP-based shear strengthening technique for reinforced concrete beams”, IBRACON Structural Journal, vol. 1, nº2, pp. 103-114, December 2005. 16. Bonaldo, E., Barros, J.A.O.; Lourenço, P.J.B., “Bond characterization between concrete substrate and repairing SFRC using pull-off testing”, International Journal of Adhesion & Adhesives, 25, p. 463-474, 2005. 15. Lourenço, P.J.B.; Almeida, J.C.; Barros, J.A.O., “Experimental investigation of bricks under tensile testing”, Journal of the British Masonry, Society Masonry International, 18(1), p. 11-20, 2005. 14. Lourenço, P.J.B.; Barros, J.A.O.; Oliveira, J. T., “Analisi, prove e tecnologia costruttiva delle volte industrializzate in muratura armata (Análises, ensaios e tecnologia construtiva de abóbadas industrializadas em alvenaria armada)”, Revista Construire in Laterizio, N. 107, p. 62-63, 2005. (em italiano – texto também disponível em Inglês) 13. Barros, J.A.O., Fortes, A.S., “Flexural strengthening of concrete beams with CFRP laminates bonded into slits”, Journal Cement and Concrete Composites, 27(4) p. 471-480, 2005. 12. Barros, J.A.O., Cunha, V.M.C.F., Ribeiro, A.F., Antunes, J.A.B., “Post-Cracking Behaviour of Steel Fibre Reinforced Concrete", RILEM Materials and Structures Journal, 38(275), p. 47-56, 2005. 11. Sena-Cruz, J.M.; Barros, J.A.O., “Modeling of bond between near-surface mounted CFRP laminate strips and concrete”, Computers and Structures Journal, 82(17-19), p. 1513-1521, 2004. 10. Sena-Cruz, J.M.; Barros, J.A.O., “Bond between near-surface mounted CFRP laminate strips and concrete in structural strengthening”, Journal of Composites for Construction, 8(6), p. 519-527, 2004. 9. Lourenço, P.J.B.; Barros, J.A.O.; Oliveira, J.T., "Shear testing of stack bonded masonry", Construction and Building Materials Journal, 18, p.125-132, 2004. 8. Vandewalle, L. et al., “Test and design methods for steel fibre reinforced concrete - s e design method - Final Recommendation”, Materials and Structures Journal, 36, p. 560-567, October 2003. 7. Vandewalle, L. et al., “Test and design methods for steel fibre reinforced concrete - Final Recommendation”, Materials and Structures Journal, 35, p. 579-582, November 2002. 6. Vandewalle, L. et al., “Design of steel fibre reinforced concrete using ?-w method: principles and applications”, Materials and Structures Journal, 35, p. 262-278, June 2002. 5. Barros, J.A.O.; Figueiras, J.A. “Nonlinear analysis of steel fibre reinforced concrete slabs on grade”, Computers & Structures Journal, 79(1), p. 97-106, January 2001. 4. Barros, J.A.O.; Sena-Cruz, J.M., “Fracture energy of steel fibre reinforced concrete“, Journal of Mechanics of Composite Materials and Structures, 8(1), p.29-45, January-March 2001. 3. Barros, J.A.O.; Figueiras, J.A., “Flexural behavior of steel fiber reinforced concrete: testing and modelling”, Journal of Materials in Civil Engineering, ASCE, 11(4), p. 331-339, 1999. 2. Barros, J.A.O.; Figueiras, J.A. “Experimental behaviour of fiber concrete slabs on soil”, Journal Mechanics of Cohesive-frictional Materials, 3, p. 277-290, 1998. 1. Veen, C.V.D.; Barros, J.A.O., “Softening of glass fibre reinforced concrete in tension”, Progress in Concrete Research, Annual Report, 3, p. 17-28, TUDelft, 1992. Artigos em revistas nacionais com arbitragem científica 30. Coelho, M.; Silva, L.; Sena Cruz, J.M.; Barros, J.A.O., ”Estudo comparativo de diferentes técnicas no reforço à flexão de estruturas de betão armado com recurso a CFRP’s (Assessment of the effectiveness of distinct flexural strengthening techniques for RC beams)”, submitted in 10/01/2011 to the Structural Engineering Journal. 29. Barros, J.A.O., ”Composite materials for the strengthening of concrete structures – Part III: models for the flexural strengthening and case-study”, 30, 22-31, March/April 2009. 28. Costa, I.G.; Barros, J.A.O., “Reforço à flexão e ao corte de vigas de betão armado com materiais



compósitos – influência do corte de estribos para instalação de laminados de CFRP, (Flexural and shear strengthening of RC beams with composite materials – assessment of the influence of cutting the stirrups)“, accepted to be published in the “Jornal de Engenharia de Estruturas”. 27. Barros, J.A.O., ”Conversas”, Revista Construção Magazine, 28, 4-7, Novembro/Dezembro 2008. 26. Barros, J.A.O., ”Materiais compósitos no reforço de estruturas de betão – Parte II: Investigação e aplicações (Composites materials for the strengthening of RC structures – Part II: Research and applications)”, Revista Construção Magazine, 23, 31-40, 2008. 25. Barros, J.A.O., ”Materiais compósitos no reforço de estruturas de betão – Parte I : propriedades e técnicas (Composites materials for the strengthening of RC structures – Part I: properties and strengthening techniques)”, Journal “Construção Magazine”, 22, 26-35, 4º Trimester 2007. 24. Lourenço, L.A.P., Barros, J.A.O.; Dinis, V.; Santos, S.P.F., “Fibras de aço no reforço de elementos estruturais - aplicação em aduelas pré-fabricadas (Steel fibres for the reinforcement of structural elements – pre-casting tunnel elements)", Journal “Engenharia e Vida”, 33, 36-43 Março 2007. 23. Barros, J.A.O.; Sena-Cruz, J.M.; Dias, S.J.E.; Ferreira, D.R.S.M.; Fortes, A.S., ”Nova abordagem no reforço de estruturas com materiais compósitos (Composites materials for the structural strengthening)”, Revista Ingenium, 84-90, Segunda Série Nº 98, Março/Abril 2007. 22. Dias, S.J.E.; Barros, J.A.O., ”Verificação experimental de uma nova técnica de reforço ao corte com CFRP para vigas de betão armado (Assessing the performance of a new shear strenghening technique for RC beams)”, IBRACON Structural Journal, vol. 1, nº2, pp. 115-126, December 2005. 21. Oliveira, J.T.; Bonaldo, E.; Barros, J.A.O.; Lourenço, P.B., ”Cascas em alvenaria cerâmica armada – um exemplo de construção pré-fabricada (Reinforced masonry shell roofs – a prefabricated example)”, Journal of “Engenharia e Vida, Engenharia Civil, Construção e Desenvolvimento”, Ano II, 13, p. 62-65, May 2005. 20. Dias, S.J.E.; Barros, J.A.O.,”Proposta de uma técnica de reforço ao corte com CFRP (A proposal for a new shear strengthening technique)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 21, p. 11-24, December 2004. 19. Ferreira, D.R.S.M.; Barros, J.A.O., ”Confinamento parcial e total de provetes cilíndricos de betão com CFRP (Partial and total confinement of cylinder concrete specimens by CFRP)”, Journal of Experimental Mechanics of APAET, 10, p. 37-47, 2004 18. Pereira, E.B.; Barros, J.A.O.; Camões, A.F.F.L., ”Betão auto compactável reforçado com fibras de aço - método de concepção e propriedades mecânicas (Fiber reinforced self-compacting concrete – Mix design method and mechanical properties)”, APEB Journal, 12, p.25-31, May 2004. 17. Dias, S.J.E.; Barros, J.A.O.,”Desempenho de distintas técnicas de reforço ao corte de vigas de betão armado com compósitos de CFRP (Performance of distinct shear strengthening techniques)”, Journal of Portuguese Structural Engineering, 53, p.41-51, 2004. 16. Gouveia, A. V.; Barros, J. A. O.; Álvaro Azevedo, F. M., “Comportamento de Vigas de Betão Armado de Secção Oca submetidas a flexão, corte e torção (Behaviour of RC hollow section beams submitted to bending, shear and torsion)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 17, p. 59-68, 2003. 15. Camões, A.F.F.L.; Barros, J.A.O.; Aguiar, J.L.B.; Magalhães, M.,”Avaliação do módulo de elasticidade de betões de elevado desempenho com cinzas volantes (Young’s modulus of high performance concrete with fly ash”, Journal of Experimental Mechanics of APAET, 8, p. 1-11, 2002. 14. Ferreira, D.R.S.M.; Barros, J.A.O.; Lourenço, P.J.B., ”Análise experimental de tensões em laminados de fibras de carbono (Experimental stress analysis of CFRP laminates)”, Journal of Experimental Mechanics of APAET, 7, p. 41-52, 2002. 13. Amorim, J.A.S.B.A.; Barros, J.A.O.; Antunes, J.A.B., ”Influência da quantidade de fibras e de cinzas volantes, para diferentes idades, no comportamento em flexão do betão reforçado com fibras de aço (Influence of the fiber content and fly ash, for distinct concrete ages, on the flexural behaviour of steel fibre reinforced concrete)”, Journal of Experimental Mechanics of APAET, 7, p. 7-27, 2002. 12. Barros, J.A.O.; Sena-Cruz, J.M.; Portela, D.C., ”Influência da percentagem de armadura convencional no comportamento à flexão de vigas reforçadas com sistemas de CFRP (Influence of the longitudinal steel reinforcement ratio on the flexural behaviour of beams strengthened by EBR CFRP systems)”, Journal of Experimental Mechanics of APAET, 6, p. 77-87, 2001. 11. Ferreira, D.R.S.M.; Barros, J.A.O.; Lourenço, P.J.B., ”Aplicação de Laminados de Fibras de Carbono no Reforço de Pilares de Betão Armado (CFRP laminates for the flexural strengthening of RC columns)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 12, p. 7-18, 2001. 10. Barros, J.A.O., “Caracterização experimental do betão reforçado com fibras – propostas recentes (Experimental characterization of fibre reinforced concrete – recent proposals)”, APEB Journal, Year III, 6, p. 31-7, July 2001. 9. Barros, J.A.O., “Betão reforçado com fibras de aço – conceitos fundamentais (Steel fibre reinforced concrete – Fundamental concepts)”, APEB Journal, Year II, 5, p. 29-34, December 2000. 8 Barros, J.A.O.; Gouveia, A.V., “Simulação do comportamento à compressão uniaxial do betão reforçado com fibras de aço (Simulation of the uniaxial compression behaviour of steel fibre reinforced concrete)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 8, p. 39-52, 2000. 7. Sena-Cruz, J.M.; Barros, J.A.O.; Delgado, R.M.; Costa, A.G., “Modelo para estruturas porticadas planas de betão armado sob acções cíclicas (Model for plane RC frames submitted to cyclic loadings)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 9, p. 51-62, 2000. 6. Barros, J.A.O., “Ensaios de placa de betão com fibras – Túnel da Gardunha II (Panel tests of steel fibre reinforced concrete – Tunel of Gardunha II)”, “Anteprojectos” Journal, 63, p. 3-8, Setembro 1999. 5. Barros, J. A. O.; Sena-Cruz, J.M.; Ulrix, E., “Avaliação da capacidade de absorção de energia de betões reforçados com fibras (Assess the energy absorption capacity of fibre reinforced concrete)”, Journal of Experimental Mechanics of APAET, 4, p. 1-11, November 1999. 4. Barros, J.A.O., “Estado-de-arte dos betões reforçados com fibras ((State-of-the-art of fibre reinforced concrete)”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 3, p. 29-47, 1996. 3. Barros, J. A. O., “Comportamento à tracção uniaxial aos 28 dias de argamassa reforçada com fibras de vidro”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 4, p. 15-30, 1996. 2. Barros, J.A.O.; Gouveia, A.V.; Azevedo, A.F.M., “Modelo de análise linear de estruturas reticuladas”, Journal of the Civil Engineering of the Civil Depart. of Minho University, 4, p. 43-65, 1996. 1. Barros, J.A.O., “Modelo de análise de compósitos laminados”, Revista de Materiais de Construção, 32, p. 42-50, November-December 1990. Publicações em actas de encontros científicos International Conferences 109. Sena-Cruz, J.; Barros, J.A.O.; Coelho, M.R.F.; Silva, L.F.F.T. “Experimental and numerical study of distinct techniques to strengthen beams failing in bending under monotonic loading”, accepted to be published in the International Conference on Advances in Construction Materials Through Science and Engineering, Hong Kong, China, 5-7 September 2011. 108. Barros, J.A.O.; Salehian, H.R.; Taheri, H. “Design-oriented approach for strain-softening and strain-hardening fibre hybrid reinforced concrete elements failing in bending”, accepted to be published in the 6th International Conference Fibre Concrete 2011 – Technology, Design, Application, CTU Prague, Czech Republic, 8-9 September 2011. 107. Jorge, M.; Branco, J.; Sena-Cruz, J.; Barros, J.A.O.; Dalfré, G.M., “Response of FRP-glulam slab systems under five-point bending load”, accepted to be published in the International Conference on Advances in Construction Materials Through Science and Engineering, Hong Kong, China, 5-7 September 2011. 106. Pereira, E.N.B.; Fischer, G.; Barros, J.A.O., “Image-based detection and analysis of crack propagation in concrete”, accepted to be published in the International Conference on Advances in Construction Materials Through Science and Engineering, Hong Kong SAR, China, 05-07 September 2011. 105. Sena-Cruz, J.; Barros, J.A.O.; Coelho, M.R.F.; Silva, L.F.F.T. “Efficiency of different FRP-based flexural strengthening techniques in beams submitted to fatigue loading”, accepted to be published in the CDCC 2011, 4th International Conference on Durability & Sustainability of fibre reinforced polymer (FRP) composites for construction & rehabilitation, Québec, Canada, 20-22 July 2011. 104. Gonilha, J.; Aquino, A.; Correia, J.R.; Branco, F.A.; Barros, J.A.O., “Evaluation of the dynamic behavior of a GFRP-SFRSCC hybrid footbridge”, accepted to be published in the 16th International Conference on



Composite Structures, Porto, June 2011. 103. Pereira, E.N.B.; Fischer, G.; Barros, J.A.O., “Hybrid fiber reinforcement and crack formation in cementitious composite materials”, High Performance Fiber Reinforced Cement Composites, Ann Arbor, Michigan, USA, 20-22 June 2011. 102. Breveglieri, M.; Barros, J.A.O.; Dalfré, G.M.; Aprile, A., “Assessment of the effectiveness of NSM-CFRP flexural strengthening configuration for continuous RC slabs”, fib Symposium – concrete engineering for excellence and efficiency, 8-10 June 2011. 101. Costa, I.G.; Barros, J.A.O., “Assessment of the bond behavior of NSM FRP materials by pullout tests”, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, 8-10 February 2011. 100. Dalfré, G.M.; Barros, J.A.O., “Assessing the effectiveness of a NSM-CFRP flexural strengthening technique for continuous RC slabs by experimental research”, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, 8-10 February 2011. 99. Dalfré, G.M.; Barros, J.A.O., “Experimental and numerical analysis of RC two-span slabs strengthened with NSM CFRP laminates”, FRPRCS10 - 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Tampa USA, April 2-4, 2011. 98. Bianco, V.; Barros, J.A.O.; Monti, G., “Influence of mechanical and geometrical parameters on the NSM FRP strips shear strength contribution to a RC beam”, FRPRCS10 - 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Tampa USA, April 2-4, 2011. 97. Bianco, V.; Monti, G.; Barros, J.A.O., “NSM FRP strips shear strength contribution to a RC beam: a design procedure”, FRPRCS10 - 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Tampa USA, April 2-4, 2011. 96. Lourenço, L.A.P.; Barros, J.A.O.; Alves, J.G.A., “Fiber reinforced concrete of enhanced fire resistance for tunnel segments”, ACI SP-276-4, Durability enhancements in concrete with fiber reinforcement, Editors: Corina-Maria Aldea and Nur Yazdani, March 2011. 95. Dias, S.J.E.; Barros, J.A.O., “Influence of the concrete properties in the effectiveness of the NSM CFRP laminates for the shear strengthening of RC beams”, CICE 2010 - The 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, September 27-29, 2010. 94. Bianco, V.; Monti, G.; Barros, J.A.O., “Shear Strengthening of RC Beams by means of NSM FRP Strips: Constitutive Law of a Single Strip”, CICE 2010 - The 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, September 27-29, 2010. 93. Bianco, V.; Barros, J.A.O.; Monti, G., “Mechanical Model to simulate the NSM FRP strips shear strength contribution to RC beams”, CICE 2010 - The 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, September 27-29, 2010. 92. Pereira, E.B., Fischer, G., Barros, J.A.O., Lepech, M., “Crack formation and tensile stress-crack opening behavior of fiber reinforced cementitious composites (SHCC)”, In B. H. Oh, O. C. Choi & L. Chung (eds.) Proceedings of FraMCoS-7, Jeju, Korea, May 23-28, 2010. 91. Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Tensile behavior of steel fiber reinforced self-compacting concrete”, ACI Convention Session “Fiber-Reinforced Self-Consolidating Concrete”, Salons G&H, Hotel Marriott, New Orleans USA, 11 November 2009. 90. Barros, J.A.O.; Lourenço, L.A.P.; Gonçalves, D.F.; Oliveira, F., “Innovative Structural Systems for Industrial Buildings using Fiber Reinforced Concrete and Material Nonlinear FEM-Based Models”, Conference on Numerical Methods for Engineering 2009, Barcelona, 29 June to 2 July 2009. 89. Barros, J.A.O.; di Prisco, M.; di Prisco, C., “Modelling FRC infrastructures taking into account the soil-structure interaction”, Conference on Numerical Methods for Engineering 2009, Barcelona, 29 June to 2 July 2009. 88. Pereira, E.N.B.; Barros, J.A.O., “3D behaviour of a 4 parameter isotropic nonlinear hardening plasticity model for concrete”, Conference on Numerical Methods for Engineering 2009, Barcelona, 29 June to 2 July 2009. 87. Sena-Cruz, J.M.; Cunha, V.M.C.F.; Camões, A.F.F.L.; Barros, J.A.O.; Cruz, P.J.S., “Modelling of bond between galvanized steel rebars and concrete”, Conference on Numerical Methods for Engineering 2009, Barcelona, 29 June to 2 July 2009. 86. Marques, R.; Lourenço, L.A.P.; Barros, J.A.O., “Data Mining techniques and UPV tests for the assessment of damage level in concrete exposed to high temperatures and subject to compression”, CSC2009 - The First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Funchal, Madeira, Portugal 1-4 September 2009. 85. Dias, S.J.E.; Barros, J.A.O., “Influence of the percentage of steel stirrups in the effectiveness of the NSM laminates shear strengthening technique”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia, paper 126, 13-15 July, 2009. 84. Barros, J.A.O.; Costa, I.G., “How shear resistance of RC beams is affected by cutting steel stirrups for installing NSM laminates for the flexural strengthening”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia, paper 102, 13-15 July, 2009. 83. Barros, J.A.O., “NSM Post-tensioned CFRP laminates for the flexural strengthening of RC beams”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia, paper 85, 13-15 July, 2009. 82. Barros, J.A.O.; Dalfré, G.M.; Dias, J.P.S.E., “Numerical Simulation of Continuous RC Slabs Strengthened using NSM Technique”, 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2008), 24-26 November, 2008. 81. Agante, M.A.B.; Júlio, E.N.B.S.; Barros, J.A.O.; Santos, J.M.C., “Active CFRP-based confinement strategies for RC columns with rectangular cross sections”, Proceedings of the 5th International Specialty Conference in Fibre Reinforced Materials at Singapore, August 2008. 80. Cunha, V.M.C.F.; Sena-Cruz, J.M.; Barros, J.A.O., “Impact of the fibre manufacturing quality control on the fibre pullout performance”, BEFIB 2008, 7th RILEM International Symposium on Fibre Reinforced Concrete Design and Applications, Artigo VIT01, 17-19 September, 2008. 79. Santos, P.F.S.; Barros, J.A.O.; Lourenço, L.A.P., “Steel fibres for the shear resistance of high strength concrete beams”, BEFIB 2008, 7th RILEM International Symposium on Fibre Reinforced Concrete Design and Applications, Artigo SIM01, 17-19 September, 2008. 78. Gomes, A.C.T.; Barros, J.A.O.; Dias, J.P.S.E., “CFRP group effect and interaction between stirrups and strips on the NSM-shear strengthening of RC beams”, Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, 22-24July 2008. 77. Barros, J.A.O.; Dias, S.J.E.; Lima, J.L.T., “Analytical and numerical analysis of the behaviour of RC beams flexural strengthened with CFRP”, Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, 22-24July 2008. 76. Barros, J.A.O.; Kotynia, R., “Possibilities and challenges of NSM for the flexural strengthening of RC structures”, Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, 22-24July 2008. 75. Bianco, V.; Barros, J.A.O.; Monti, G., “A proposal for modeling debonding of nsm frp strips for shear strengthening of RC beams”, AMCM’2008, 6th International Conference Analytical Models and New Concepts in Concrete and Masonry Structures, 9-11 June, Lodz, Poland. 74. Barros, J.A.O.; Dalfré, G.M.; Trombini, E.; Aprile, A., “Exploring the possibilities of a new technique for the shear strengthening of RC elements”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 73. Barros, J.A.O.; Perrone, M.; Aprile, A., “Confinement of RC columns submitted to axial and cyclic lateral loading”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 72. Ferreira, D.R.S.M.; Barros, J.A.O., “Stress-strain model for partial CFRP confined concrete”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 71. Dias, S.J.E.; Barros, J.A.O., “Behaviour of RC beams shear strengthening with NSM CFRP laminates”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 70. Varma, K.R.; Barros, J.A.O.; Sena-Cruz, J.M.; Ferreira, D.R.S.M., “A model to simulate the cyclic axial compressive behavior of RC columns confined with CFRP sheets”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 69. Sas, G.; Täljsten, B., Barros, J.A.O.; Lima, J.L.T.; Arifovic, F.; Carolin, A., “How reliable are the available



models for predicting the FRP contribution for the shear resistance of RC beams?”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 68. Gouveia, V.A.; Barros, J.A.O.; Azevedo, A.F.M., Sena-Cruz, J.M., “Multifixed smeared 3D crack model to simulate the behavior of fiber reinforced concrete structures”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 67. Bianco, V.; Barros, J.A.O.; Monti, G., “Analytical modeling strategy for predicting the NSM FRP strips contribution for RC beams shear strength”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 66. Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Analytical model for bond-slip of hooked-end steel fibres”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. 65. Barros, J.A.O.; Santos, S.P.F.; Lourenço, L.A.P.; Gonçalves, D.M.F., “Flexural behaviour of steel fibre reinforced self-compacting concrete laminar structures”, HAC2008, 1st Spanish Congress on Self-Compacting Concrete, 567-578, Valencia, Spain, 18-19 February, 2008 64. Barros, J.A.O., Pereira, E.N.B., Gouveia, A.V., Azevedo, A.F.M., “Numerical simulation of thin steel fiber self-compacting concrete structures”, ACI 435/544 Fall 2007 Puerto Rico Session 1: Deflection and stiffness issues in FRC and thin structural elements (Structural Implications and Material Properties), in CD, 25 pages, October 2007. 63. Bianco, V.; Barros, J.A.O. and Monti, G., "Influence of the concrete mechanical properties on the efficacy of the shear strengthening intervention on RC beams by NSM technique", Asia-Pacific conference on FRP in Structures (APFIS 2007), Hong Kong, China, pgs 105-110, 12-14 December 2007. 62. Alves, A.; Rodrigues, J.P.; Barros, J.A.O.; Lourenço, L.A.P.; Santos, S.P.F., “Fire behaviour of a fibre reinforced concrete tunnel segments”, Fib Workshop, Fire design of concrete structures from materials modeling to structural performance, University of Coimbra, 8 and 9 November 2007 61. Barros, J.A.O., Ferreira, D.R.S.M.; Varma, R.K. “CFRP confined reinforced concrete elements submitted to direct cyclic compressive loading”, Special Publication “Seismic Strengthening of Concrete Buildings using FRP Composites” Paper SP-06, 2007. 60. Lima, J.L.T.; Barros, J.A.O., ”Design models for shear strengthening of reinforced concrete beams with externally bonded FRP composites: a statistical vs reliability approach”, FRPRCS-8, University of Patras, Patras, Greece, July 16-18, 2007 59. Bonaldo, E.; Barros, J.A.O.; Lourenço, P.J.B., ”Influence of the spacing between nsm-cfrp laminates on the flexural strengthening efficacy of rc slabs”, FRPRCS-8, University of Patras, Patras, Greece, July 16-18, 2007 58. Bianco, V.; Barros, J.A.O.; Monti, G., ”A new approach for modelling the nsm shear strengthening contribution in reinforced concrete beams”, FRPRCS-8, University of Patras, Patras, Greece, July 16-18, 2007 57. Barros, J.A.O.; Oliveira, J.T., ” A test setup to assess the influence of mandatory parameters affecting the prformance of NSM CFRP laminates for the shear strengthening of RC beams”, Proceedings of ACIC 07, Advanced Composites in Construction, University of Bath, Bath, UK, 282-291 2nd – 4th April 2007. 56. Barros, J.A.O.; Oliveira, J.T.; Bonaldo, E., ”Composite materials for the structural strengthening of reinforced masonry shells”, Proceedings of ACIC 07, Advanced Composites in Construction, University of Bath, Bath, UK, 310-319, 2nd – 4th April 2007. 55. Sena-Cruz, J.M.; Barros, J.A.O.; Azevedo, A.F.M.; Ventura Gouveia, A. “Numerical simulation of the nonlinear behavior of rc beams strengthened with nsm CFRP strips“, CMNE/CILAMCE, FEUP, Porto, 13 pp., 13-15 June, 2007. 54. Ventura Gouveia, A.; Barros, J.A.O.;Azevedo, A.F.M.; Sena-Cruz, J.M.,“Crack constitutive model to simulate the behavior of fiber reinforced concrete structures failing in punching“, CMNE/CILAMCE, FEUP, Porto, 13 pp., 13-15 June, 2007. 53. Sena-Cruz, J. M.; Barros, J.A.O., “A pullout test for the near surface mounted CFRP-concrete bond characterization “, Materais 2007, FEUP, Porto, 5 pp., 1-4 April 2007. 52. Santos, S.P.F.; Barros, J.A.O.; Lourenço, L.A.P., “Fibrous Reinforcing System to Increase the Shear Resistance of High Strength Concrete“, Materais 2007, FEUP, Porto, 5 pp., 1-4 April 2007. 51. Lourenço, L.A.P.; Barros, J.A.O.; Santos, S.P.F., “High Strength and Ductile Fibrous Concrete of Enhanced Fire Resistance“, Materais 2007, FEUP, Porto, 5 pp., 1-4 April 2007. 50. Cunha, V. M.C.F.; Barros, J.A.O.; and Sena-Cruz, J. M., “Bond-Slip Mechanisms of Hooked-End Steel Fibers in Self-Compacting Concrete “, Materais 2007, FEUP, Porto, 5 pp., 1-4 April 2007. 49. Dias, S.J.E.; Bianco, V.; Barros, J.A.O.; Monti, G., ”Low strength T-cross section RC beams shear-strengthened by NSM technique”, Materiali ed Approcci Innovativi per il Progetto in Zona Sismica e la Mitigazione della Vulnerabilità delle Strutture Università degli Studi di Salerno – Consorzio ReLUIS, 12-13 Febbraio 2007 48. Dias, S.J.E.; Barros, J.A.O., “NSM CFRP Laminates for the Shear Strengthening of T Section RC Beams”, 2nd International fib Congress, Naples, June 5-8, Paper 10-58 in CD, 2006. 47. Ferreira, D.R.S.M.; Barros, J.A.O., “Confinement efficacy of partially and fully wrapped CFRP systems in RC column prototypes”, 2nd International fib Congress, Naples, June 5-8, Paper 10-20 in CD, 2006. 46. Ferreira, D.R.S.M.; Barros, J.A.O., “CFRP-Based confinement strategies for RC columns-experimental and analytical research”, ISPIC, International Symposium in Concrete, Guimarães, Portugal, pp.261-272, 2-4 April 2006. 45. Bonaldo, E.; Barros, J.A.O.; Lourenço, P.J.B., “Efficient strengthening technique for reinforced concrete slabs”, a publicar no MMMCP Symposium of S. Shah, Greece, 2006. (invited paper) 44. Barros, J.A.O.; Ferreira, D.R.S.M., “Partial versus full wrapping confinement systems for concrete columns”, International Conference on Concrete Repair, Rehabilitation and Retrofitting, South Africa, 1123-1129, November 2005. 43. Dias, S.J.E.; Barros, J.A.O., “Shear Strengthening of RC beams with near-surface-mounted CFRP laminates”, 7th International Symposium on Fiber Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRP7RCS), Kansas, USA, SP-230-47, 807-824, 7-10 November 2005. 42. Bonaldo, E.; Castro-Gomes, J.P.; Barros, J.A.O.; Lourenço, P.J.B., “SEM Analysis of bond epoxy based layer between hardened concrete and SFRC repairing”, 10th Euroseminar on Microscopy Applied to Building Materials University of Paisley, Scotland, CD, 11, 21-25 June 2005. 41. Barros, J.A.O.; Gouveia, A.V.; Sena-Cruz, J.M.; Azevedo, A.F.M.; Antunes, J.A.B., “Design methods for steel fiber reinforced concrete industrial floors”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, CD, 22-24 August 2005. 40. Pereira, E.B., Barros, J.A.O.; Cunha, V.M.C.F.; Santos S.P.F., “Compression and bending behavior of steel fiber reinforced self-compacting concrete”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, CD, 22-24 August 2005. 39. Bonaldo, E., Barros, J.A.O.; Lourenço, P.J.B., “Concrete Slabs Strips Reinforced with Epoxy-bonded Carbon Laminates into Slits”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, August CD, 22-24, 2005. 38. Barros, J.A.O.; Ferreira, D.R.S.M., “An efficient confinement strategy with CFRP sheets to increase the energy absorption capacity of concrete columns”, 1st US-Portugal International Workshop – Grand challenges in earthquake engineering, p. 13.1-13.8, Portugal, 11-14 July 2005. 37. Barros, J.A.O.; Dias, S.J.E.; Fortes, A.S., “Near Surface Mounted thecnique for the flexural and shear strengthening of concrete beams”, INCOS’05 International Conference, p. 229-236, Coimbra, Portugal, June 2005. 36. Bonaldo, E.; Barros, J.A.O.; Lourenço, P.J.B., “On bonding repairing steel fibre reinforced concrete to hardened concrete”, Congresso Internacional Global Construction: Ultimate Concrete Opportunities, p. 213-220, UK, 2005. 35. Barros, J.A.O.; Sena-Cruz, J.M.; Dias, S.J.E.; Ferreira, D.R.S.M.; Fortes, A.S., “Near surface mounted CFRP-based technique for the strengthening of concrete structures”, Workshop on R+D+I in Technology of Concrete Structures – a tribute to Dr. Ravindra Gettu, p. 205-217, Barcelona, 5 October 2004. 34. Barros, J.A.O.; Pereira, E.B.; Ribeiro, A.F.; Antunes J.A.B., "Self compacting steel fibre reinforced concrete for precasted sandwich panels – experimental and numerical research", Workshop of 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, 24-25 September 2004. (invited paper) 33. Pereira, E.B.; Barros, J.A.O.; Ribeiro, A.F.; Camões, A.F.F.L., "Post-cracking behaviour of selfcompacting steel fibre reinforced concrete", 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, Vol. 2, p. 1371-1380, 20-22 September 2004.



32. Barros, J.A.O.; Gettu, R.; Barragan, B.E., "Material Nonlinear analysis of Steel fibre reinforced concrete beams failing in shear", 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, Vol. 1, p. 711-720, 20-22 September 2004. 31. Lourenço, P.J.B.; Palácio, K.; Barros, J.A.O., "Design recommendations for reinforced masonry arches", ARCH’04, Eds. P.Roca and E. Oñate, CIMNE, Barcelona, p. 583-592, 2004. 30. Oliveira, J.T.; Barros, J.A.O.; Lourenço, P.J.B.; Bonaldo, E., "Flexural behavior of representative panels of prefabricated reinforced masonry shells", Proc. 13th Int. Brick/Block Masonry Conf., Amsterdam, the Netherlands, p. 257-266, 4-7 July 2004. 29. Gettu, R.; Sena-Cruz, J.M.; Barros, J.A.O.; Santos, A.C.; Bittencourt, Túlio, "On the experimental study of the interface between a fiber composite lamina and concrete ", Fifth International Conference on Fracture Mechanics of Concrete and Concrete Structures & Post-Conference Workshops, Colorado, USA, 12-16 April 2004. 28. Camões, A.F.F.L.; Barros, J.A.O.; Aguiar, J.B., "Flexural tensile behaviour of enhanced performance concrete", 9th Portuguese Conference on Fracture, ESTSetúbal, Portugal, p. 405-414, 18-20 February 2004. 27. Sena-Cruz, J.M.; Barros, J.A.O.; Ribeiro, A.F.; Azevedo, A.F.M.; Camões, A.F.F.L., "Stress-crack opening relationship of enhanced performance concrete", 9th Portuguese Conference on Fracture, ESTSetúbal, Portugal, p. 395-403, 18-20 February 2004. 26. Ferreira, D.R.S.M.; Barros, J.A.O., "Strategies for concrete confinement with strips of CFRP sheet", International Conference Composites in Constructions - CCC2003, Cosenza, Italy, p. 483-488, 16-19 September 2003. 25. Sena-Cruz, J.M.; Barros, J.A.O., "Bond between near-surface mounted CFRP laminates and the concrete in structural strengthening", International Conference Composites in Constructions - CCC2003, Cosenza, Italy, p. 397-402, 16-19 September 2003. 24. Barros, J.A.O.; Dias, S.J.E., "Shear strengthening of reinforced concrete beams with laminate strips of CFRP", International Conference Composites in Constructions - CCC2003, Cosenza, Italy, p. 289-294, 16-19 September 2003. 23. Barros, J.A.O.; Antunes, J.A.B., "Experimental characterization of the flexural behaviour of steel fibre reinforced concrete according to RILEM TC 162-TDF recommendations", RILEM TC 162 TDF Workshop, p. 77-89, 20-21 March 2003. 22. Barros, J.A.O.; Cunha, V.M.C.F.; Ribeiro, A.F. "Post-Cracking Behaviour of Steel Fibre Reinforced Concrete (RILEM Recommendations)", 5th International Colloquium "Industrial Floors", Technique Academy Esslingen, Stuttgart, German, p. 547-556, 21-23 January 2003. 21. Sena-Cruz, J.M.; Barros, J.A.O., “Bond behavior of carbon laminate strips into concrete by pullout bending tests”, Bond in Concrete – from the research to standards, International Symposium, Budapest, Hungria, p. 614 621, 20-22 November 2002. 20. Almeida, J.C.; Lourenço, P.J.B.; Barros, J.A.O., “Characterization of brick and brick–mortar interface under uniaxial tension”, VII International Seminar on Structural Masonry for Developing Countries, Belo Horizonte, Brasil, p. 67-76, 18-20 September 2002. 19. Barros, J.A.O; Ribeiro, A.F.; Oliveira, C.A.P.; Cunha, B.J.C.F., "Characterization and strengthening a "ghost" building", Third International Conference on the Behaviour of Damaged Structures, CD, 29-31 July 2002. 18. Barros, J.A.O.; Fortes, A.S., “Concrete beams reinforced with carbon laminates bonded into slits”, 5º Congreso de Métodos Numéricos en Ingeniería, Madrid, CD, 3-6 June 2002. (invited paper) 17. Ding, Y.; Barros, J.A.O., “Untersuchung der Stahlfaserverteilung im Versagens-querschnitt and Betonen mit unterschiedlichem Fasergehalt (Investigation of steel fibre distribution in the failure section of concretes with different fibre contents)”, 7th International Conference on Shotcrete Technology 2002, Austria, p. 175-184, January 2002. (em Alemão) 16. Sena-Cruz, J.M.; Barros, J.A.O.; Faria, R.M.C.M., “Assessing the embedded length of epoxy-bonded carbon laminates by pull-out bending tests”, International Conference Composites in Construction, p. 217-222, 10-12 October 2001. 15. Barros, J.A.O.; Sena-Cruz, J.M., “Strengthening a prestressed concrete slab by epoxy bonded FRP composites and SFRC overlayer”, 7th Internacional Conference on Inspection Appraisal Repairs & Maintenance of Buildings & Structures, Nottingham Trent University, UK, p. 211-218, 11-13 September 2001. 14. Lourenço P.J.B.; Barros, J.A.O., ”Size effect on masonry subjected to out-of-plane loading”, 12th International Brick/Block Masonry Conference, Madrid, p. 1085-1098, 25-28 June 2000. 13. Barros, J.A.O.; Sena-Cruz, J.M.; Delgado, R.M.; Costa, A.G., “Reinforced concrete under cyclic loading”, 12th World Conference on Earthquake Engineering, Auckland � Nova Zelândia, p. 0772 1 a 0772 8, 30 January to 4 February 2000. 12. Barros, J.A.O.; Sena-Cruz, J.M.; Ulrix, E., “Energy absorption capacity of steel fibre reinforced concrete”, IRF’99 International Conference, Porto, Portugal, p. 200, 19-22 July 1999. 11. Barros, J.A.O., “Analysis of concrete slabs supported on soil”, IV Congreso Métodos Numéricos en Ingeniería, SEMNI, Sevilha, CD, June 1999 (invited paper). 10. Barros, J.A.O., “Experimental behavior of mesh reinforced shotcrete and steel fiber reinforced shotcrete panels”, International Conference of the European Ready Mixed Concrete Organization, ERMCO’98, Lisboa, p. 701-714, 23-27 June 1998. 9. Barros, J.A.O.; Martins F.F., “Analysis of damage building in the north region of Portugal”, 1st International Conference on the Behaviour of Damaged Structures, Brasil, CD, 20-22 May 1998. 8. Barros, J.A.O.; Figueiras, J.A., “Experimental analysis of fiber reinforced concrete slabs”, International Conference New Technologies in Structural Engineering (IABSE, FIP and LNEC), LNEC, Lisbon, p. 271-278, 2-5 July 1997. 7. Barros, J.A.O.; Figueiras, J.A., “Experimental and numerical analysis of steel fiber reinforced concrete slabs”, I Conferencia Internacional sobre los Materiales Compuestos Aplicados en Arquitectura y Construcción, Sevilha, p. 29-39, October 1996. 6. Barros, J.A.O.; Figueiras, J.A., “Experimental Behavior of Concrete Beams and Slabs Reinforced with Steel Fibers”, ICCE/2-Second International Conference on Composites Engineering, August 1995. 5. Barros, J.A.O.; Figueiras, J.A.; Veen, C.V.D., “Tensile behaviour of glass fibre reinforced concrete”, Recent Advances in Experimental Mechanics, eds. J.F. Silva Gomes et al., Lisbon, Portugal, Vol. 2, p.1073-1080, 1994. 4. Ferreira, A.J.M.; Barros, J.A.O.; Marques, A.T., “Finite element analysis of sandwich structures”, Sixth International Conference on Composite Structures, September, 1991. 3. Ferreira, A.J.M.; Barros, J.A.O.; Marques, A.T., “Finite element analysis of sandwich structures”, International Conference on Composite Materials ICCM/VIII, Honolulu, USA, July 1991. 2. Barros, J.A.O.; Barreiros Martins, J., “Analysis of plates on elastic foundation by the finite element method”, EPMESC III, Macau, Vol.4, p. 815-824, August 1990. 1. Barros, J.A.O., Figueiras, J.A. “Analysis of composite laminates using graphical processing”, EPMESC III, Macau, Vol.3, p. 611-622, August 1990. National Conferences (in Portuguese) 115. Dalfré, G.M.; Barros, J.A.O.; Machado, D., “Varões embebidos para o reforço ao corte de vigas de betão armado (Embedded bars for shear strengthening of RC beams)”, Submitted to the 53º Brazilian Concrete Conference– IBRACON 2011, November 2011. 114. Sena-Cruz, J.M.; Barros, J.A.O.; Silva, L; Coelho, M., “Eficiência de diferentes técnicas de reforço à flexão de vigas de betão armado (Effectiveness of distinct flexural strengthening techniques for RC beams)”, BE2010 – National Conference on Structural Concrete, Lisbon, LNEC, 10-12 November 2010. 113. Lameiras, R.M.; Azenha, M.A.D.; Barros, J.A.O., “Concepção de sistemas de restrição passiva à retracção para avaliação das tensões associadas à deformação impedida (Conception of shrinkage passive restriction systems for the evaluation of the restrained strains)”, BE2010 – Encontro Nacional Betão Estrutural, Lisboa, LNEC, 10-12 Novembro 2010. 112. Dias, S.J.E.; Barros, J.A.O., “Aplicação da técnica da inserção de laminados de CFRP no reforço ao corte de vigas de betão de baixa resistência (Assessment of the effectiveness of the NSM CFRP technique for the shear strengthening of RC beams)”, BE2010 – Encontro Nacional Betão Estrutural, Lisboa, LNEC, 10-12 Novembro 2010. 111. Dalfré, G.; Barros, J.A.O., “Avaliação da eficácia da técnica NSM no reforço à flexão de faixas de laje



contínuas de betão armado (Assessment of the effectiveness of the NSM technique for the flexural strengthening of continuous RC slabs”, BE2010 – Encontro Nacional Betão Estrutural, Lisboa, LNEC, 10-12 Novembro 2010. 110. Barros, J.A.O.; Costa, I.G., “Avaliação do desempenho de ensaios de caracterização da ligação FRP-betão (Assessment of the effectiveness of test setups for the characterization of the FRP-concrete bond”, BE2010 – Encontro Nacional Betão Estrutural, Lisboa, LNEC, 10-12 Novembro 2010. 109. Dalfré, G.M.; Barros, J.A.O., “Reforço à flexão de faixas de lajes contínuas utilizando laminados de carbono aplicados segundo a técnica NSM (Flexural strengthening of continuous RC slabs using the NSM technique)”, accepted to be published in the IBRACON – Anais do 52º Congresso Brasileiro do Concreto CBC2010, Fortaleza, 13 to 17 October 2010. 108. Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Comportamento em tracção uniaxial e flexão de betão auto-compactável reforçado com fibras de aço (Tensile and flexural behaviour of steel fibre reinforced self-compacting concrete)”, BAC2010 - 2º Congresso Ibérico sobre betão auto-compactável, Guimarães, 1 and 2 July 2010. 107. Lourenço, L.A.P.; Durães, B.; Barros, J.A.O.; Gonçalves, D.M.F., “Comportamento mecânico de betão auto-compactável reforçado com fibras de aço após exposição a temperaturas elevadas (Mechanical behaviour of steel fibre reinforced self-compacting concrete after has been exposed to high temperatures)”, BAC2010 - 2º Congresso Ibérico sobre betão auto-compactável, Guimarães, 1 and 2 July 2010. 106. Gonçalves, D.M.F.; Barros, J.A.O.; Lourenço, L.A.P.; Sampaio, C., “Cobertura pré-fabricada em betão auto-compactável reforçado com fibras de aço (Pre-fabricated roofing in steel fibre reinforced self-compacting concrete)”, BAC2010 - 2º Congresso Ibérico sobre betão auto-compactável, Guimarães, 1 and 2 July 2010. 105. Barros, J.A.O.; Lourenço, L.A.P.; Gonçalves, D.M.F.; Durães, B.; Alves, N.; Nunes, Â., “Avaliação da heterogeneidade das propriedades mecânicas de um BACRFA em elementos estruturais (Assessment of the heterogeneities of the mechanical properties of a SFRSC applied in structural elements)”, BAC2010 - 2º Congresso Ibérico sobre betão auto-compactável, Guimarães, 1 and 2 July 2010. 104. Sena-Cruz,J.M.; Ramos, L.; Barros, J.A.O.; Aguilar, R., “Ensaio de carga numa laje fungiforme de um pavilhão industrial (Load test of a RC slab of na industrial building)”, Reabilitar 2010, Encontro Nacional Conservação e Reabilitação de Estruturas, LNEC, Artigo Com_015, 23-25 June 2010. 103. Sena-Cruz,J.M.; Barros, J.A.O.; Coelho, M., “Estudo da Ligação entre laminados Multi-direccionais e o betão (Study of the connexion between multi-directional laminates and concrete)”, Reabilitar 2010, Encontro Nacional Conservação e Reabilitação de Estruturas, LNEC, Artigo Com_022, 23-25 June 2010. 102. Barros, J.A.O.; Lourenço, L.A.P.; Silva, P.; Rosado, M., “Laminados de CFRP pós-tensionados no reforço à flexão de lajes de betão armado com excessiva deformabilidade (Pre-stressed CFRP laminates for the flexural strengthening of RC slabs presenting excessive deformability)”, Reabilitar 2010, Encontro Nacional Conservação e Reabilitação de Estruturas, LNEC, Artigo Com_012, 23-25 June 2010. 101. Carlos, K. G.; Sena-Cruz, J.M.; Barros, J.A.O.; Miranda, T.; Ferreira, C.; Azenha, M.A.D., “Sistemas de solo compósito/betão: caracterização da interface geocompósito-solo (Composite soil/concrete systems: characterization of the geocomposite-soil interface)”, 12º Congresso Nacional de Geotecnia, Guimarãesm 26-29 April 2010. 100. Carlos, K. G.; Sena-Cruz, J.M.; Barros, J.A.O.; Miranda, T.; Ferreira, C.; Azenha, M.A.D., “Sistemas de solo compósito/betão: caracterização da interface geocompósito-betão (Composite soil/concrete systems: characterization of the geocomposite-concrete interface)”, 12º Congresso Nacional de Geotecnia, Guimarães, 26-29 April 2010. 99. Barros, J.A.O., “Modelação da interação solo estrutura na simulação do comportamento de box-culvert em betão reforçado com fibras (Modeling the soil-structure interaction in the simulation of the behaviour of fibre reinforced concrete box-culvert)”, 12º Congresso Nacional de Geotecnia, Guimarães, 26-29 April 2010. 98. Dias, S.J.E.; Barros, J.A.O., “Aplicação da técnica da inserção de laminados de CFRP no reforço ao corte de vigas de betão armado (NSM CFRP-based laminates for the shear strengthening of RC beams)”, 8º Congresso Nacional de Mecânica Experimental, Guimarães, 21-23 April 2010. 97. Sena-Cruz, J.M.; Barros, J.A.O.; Coelho, M.R., “Comportamento da ligação entre laminados multi-direccionais de CFRP e o betão (Behaviour of the bond between multi-directional CFRP laminates and concrete substrate)”, 8º Congresso Nacional de Mecânica Experimental, Guimarães, 21-23 April 2010. 96. Sena-Cruz, J.M.; Barros, J.A.O.; Coelho, M.R., “Comportamento de laminados multi-direccionais de CFRP para aplicações em Engenharia Civil (Behaviour of multi-directional CFRP laminates for applications in Civil Engineering)”, 8º Congresso Nacional de Mecânica Experimental, Guimarães, 21-23 April 2010. 95. Cunha, V.M.C.F.; Sena-Cruz, J.M.; Barros, J.A.O., “Influência da geometria e propriedades mecânicas de fibras de aço no desempenho ao arrancamento (Influence of the geometry and mechanical properties of steel fibres on the fibre pullout behaviour)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 94. Lourenço, P.B.; Pereira, J.; Barros, J.A.O., “Comparação de programas comerciais para dimensionamento de lajes em betão armado (Comparison of commercial programs for the desing of RC slabs)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 93. Agante, M.A.B.; Júlio, E.N.B.S.; Barros, J.A.O.; Santos, J.M.C., “Avaliação do desempenho de uma técnica para aplicação de pós-tensão em mantas de CFRP no confinamento de pilares de betão armado (Assessment of the performance of a technique to confine concrete columns with active CFRP systems)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 92. Macedo, L.; Costa, I.G.; Barros, J.A.O., “Avaliação da influência das propriedades de adesivos e da geometria de laminados de fibra de carbono no comportamento de ensaios de arranque (Assessment of the influence of the adhesive properties and geometry of CFRP laminates in the bond behaviour)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 91. Lourenço, L.A.P.; Barros, J.A.O.; Marques, P.; Marques, Rui, “Propagação de ondas ultra-sónicas em provetes de betão expostos a temperaturas elevadas (Ultrasonic-waves propagation in concrete specimens exposed to high temperatures)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 90. Lima, J.L.T.; Barros, J.A.O., “Novas perspectivas para o desenvolvimento de modelos de dimensionamento ao corte de vigas de betão armado reforçadas com FRP colado externamente (New prespectives for the development of analytical models for the design of FRP-based shear strengthening systems)”, Betão Estrutural 2008, Guimarães, 5 7 November 2008. 89. Dalfré, G.M.; Barros, J.A.O.; Trombini, E., “Análise do desempenho de uma nova técnica de reforço ao corte para elementos estruturais de betão armado (Assessment of a new technique for the shear resistance of RC elements”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 88. Barros, J.A.O.; Dias, J.P.S.E.; Gonçalves, D.M.F.; Lourenço, L.A.P.; Chaves, J., “Moradias de custo controlado em betão auto-compactável reforçado com fibras (Steel fibre reinforced self-compacting concrete for cost competitive houses”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 87. Barros, J.A.O.; Gomes, A.C.T., “Laminados de CFRP pré-tensionados para o reforço à flexão de vigas de betão armado (NSM prestressed CFRP laminates for the flexural strengthening of RC beams)”, Betão Estrutural 2008, Guimarães, 5-7 November 2008. 86. Ferreira, D.R.S.M.; Barros, J.A.O., “Confinamento de pilares de betão armado reforçados total e parcialmente com mantas de CFRP submetidos a carregamentos ciclícos de compressão (RC columns partially confined with CFRP sheets and submitted to compression cyclic loading)”, 7º Congresso Nacional de Mecânica Experimental, Univ. de Trás-os-Montes e Alto Douro, Vila Real, 23-25 January 2008. 85. Gonçalves, D.F.; Dias, J.P.S.E.; Lourenço, L.A.P.; Barros, J.A.O.; Sampaio, C., “Painéis pré-fabricados em betão autocompactável reforçado com fibras de aço para fachadas de edifícios”, 2nd National Conference on concrete Prefabrication, ANIPB 2008, 6, 7 March 2008, LNEC, Lisboa. 84. Dias, J.P.S.E.; Lourenço, L.A.P.; Barros, J.A.O.; Monteiro, F.O., “Aplicação de novos materiais e de modelos de análise não linear material no desenvolvimento de sistemas estruturais pré fabricados para edifícios industriais”, 2nd National Conference on concrete Prefabrication, ANIPB 2008, 6, 7 March 2008, LNEC, Lisboa. 83. Barros, J. A. O.; Gouveia, A. V., “Memória Descritiva e Justificativa do Projecto de Estabilidade do Edifício do Centro de Solidariedade de Braga", Seminar of the Civil Engineering Department, Polytechnic Institute of Viseu, Viseu, 11 pp., 11 May 2006. 82. Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., "Modelação analítica da influência da idade de betão auto-compactável reforçado com fibras de aço no seu comportamento à compressão (Analytica simulation of the influence of the steel fibre reinforced self-compacting concrete age on its compression behaviour)”, 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. 81. Santos, S.P.F.; Barros, J.A.O.; Freitas, M.P., "Betão auto-compactável reforçado com fibras de aço para o



reforço à flexão de estrururas laminares (Steel fibre reinforced self-compacting concrete for the flexural resistanced of laminar structures)", 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. 80. Dias, S.J.E.; Barros, J.A.O., "Comportamento de vigas de betão armado reforçadas ao corte por inserção de laminados de CFRP (Behaviour of CFRP-shear strengthened reinforced concrete beams)”, 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. 79. Lourenço, L.A.P.; Barros, J.A.O.; Santos, S.P.F.; Mesquita, A., "Análise estrutural de aduela prefabricada em betão reforçado com fibras para o revestimento de túneis (Structural analysis of pre-fabricated fibre reinforced concrete tunnel segnments)", 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. http://hdl.handle.net/1822/5991 78. Lourenço, L.A.P.; Barros, J.A.O.; Rodrigues, J.; Santos, S.P.F.; Alves, A., "Betão fibroso de comportamento melhorado ao fogo (Fibrous concrete of enhanced behavior to the fire)”, 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. http://hdl.handle.net/1822/5994 77. Lima, J.L.T.; Barros, J.A.O.,"Desempenho de modelos analíticos de previsão da contribuição de materiais compósitos no reforço ao corte de vigas de betão armado (Performance of analytica models of the prediction of FRP contribution for the shear resistance of reinforced concrete beams)”, 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006. 76. Ferreira, A.J.M.; Barros, J.A.O.,"Elementos de pilar de betão armado confinados com sistemas de CFRP submetidos a carregamento cíclico de compressão (Reinforced concrete columns confined with CFRP systems submitted to compressive cyclic loading)”, 4th JPEE Portuguese Conference of Structural Engineering, paper in CD, December 13-16, 2006 75. Barros, J.A.O., Pereira, E.N.B., Santos, S.P.F., Lourenço, L.A.P., "Possibilidades e desafios do betão auto compactável reforçado com fibras – do laboratório à aplicação real (Possibilities and challenges of the fibre reinforced self-compacting concrete – from the laboratory to the practice)", Seminar “Inovation in the concrete technology and standards” Construnor 2006, Exhibition Parque of Braga, 21 September 2006. 74. Dias, S.J.E.; Barros, J.A.O., "Influência da percentagem e orientação de laminados de CFRP no reforço ao corte de vigas de betão armado (Influence of the percentage and orientation of the CFRP laminates on the shear strengthening of RC beams)", VIº Symposium EPUSP on Concrete Structures, S. Paulo, Brazil, 9-11 April 2006. 73. Dias, S.J.E.; Barros, J.A.O., “Reforço ao corte de vigas T de betão armado por inserção de laminados de CFRP (Shear strengthening of T cross section RC beams by NSM technique)”, 47º Brasilian Conference on Concrete – CBC2005, Olinda, Brazil, Paper 47CBC0415, p. VII.445 – VII.461, 2-7 September 2005. 72. Pereira, E.B.; Barros, J.A.O.; Santos, S.P.F.; Queirós, P.A.A.A.V., “Painéis aligeirados em betão auto compactável reforçado com fibras de aço (Lightweight panels of steel fibre self-compacting concrete”, 47º Brasilian Conference on Concret – CBC2005, Olinda, Brasil, Paper 47CBC0141, p. V.1009 – V.1024, 2-7 September 2005. 71. Ferreira, D.R.S.M; Barros, J.A.O., “Faixas de manta de CFRP no confinamento de elementos de pilar de betão armado (Strips of CFRP sheet on the confinement of RC column elements)”, 6º National Conference Congresso on the Experimental Mechanic, Azores, July 2005. 70. Cunha, V.M.C.F.; Barros, J.A.O., “Comportamento à tracção directa de elementos laminares de betão armado reforçado com fibras de aço (Direct tensile behavior of laminar elements reinforced with steel bars and fibers)”, National Conference on Structural Concrete, BE2004, p. 309-316, 17-19 November 2004. 69. Gouveia, A.V.; Barros, J.A.O.; Antunes, J.A.B.; Azevedo, A.F.M.; Sena-Cruz, J.M., “Método das linhas de rotura versus modelos de análise não linear material na determinação da capacidade de carga de lajes apoiadas em solo (Yield line method versus models for material nonlinear analysis of slabs on soil)”, National Conference on Structural Concrete, BE2004, p. 389-398, 17-19 November 2004. 68. Sena-Cruz, J.M.; Barros, J.A.O., Azevedo, A.F.M., “Modelação de vigas reforçadas com laminados de CFRP inseridos no betão de recobrimento (Modeling the behavior of RC beams strengthened by NSM technique)”, National Conference on Structural Concrete, BE2004, pp. 727-734, 17 a 19 Novembro 2004. 67. Dias, S.J.E.; Barros, J.A.O., “Avaliação da eficácia de distintas técnicas de reforço ao corte de vigas de betão armado com CFRP (Assessing the effectiveness of distinct techniques for the shear strengthening of RC beams)”, National Conference on Structural Concrete, BE2004, p. 751-758, 17-19 November 2004. 66. Palácio Késio; Lourenço, P.J.B.; Barros, J.A.O., “Nova formulação para o dimensionamento de estruturas laminares de betão armado (A new formulation for the design of laminar reinforced concrete structures)”, National Conference on Structural Concrete, BE2004, p. 509-516, 17-19 November 2004. 65. Oliveira, J.T.; Barros, J.A.O.; Everaldo, B.; Lourenço, P.J.B., “Comportamento à flexão de painéis representativos de um novo sistema construtivo em alvenaria armada (Flexural behavior of representative panels of a new reinforced masonry structural system)”, National Conference on Structural Concrete, BE2004, pp. 1073-1080, 17 a 19 November 2004. 64. Bonaldo, E.; Barros, J.A.O.; Lourenço, P.J.B., “Caracterização do comportamento da ligação entre betões de distinta classe de resistência (Characterization of the behaviour of the bond between concretes of distinct strength class)”, National Conference on Structural Concrete, BE2004, p. 703-710, 17-19 November 2004. 63. Pereira, E.B.; Barros, J.A.O.; Camões, A.F.F.L., “Painéis aligeirados em betão autocompactável reforçado com fibras de aço (Lightweigh panels of steel fibre reinforced self-compacting concrete)”, National Conference on Structural Concrete, BE2004, p. 291-298, 17-19 November 2004. 62. Ferreira, D.R.S.M; Barros, J.A.O., “Confinamento garantido ao betão por cintagem total e parcial com mantas de CFRP (Concrete confinment provided by full and discrete wrapping of CFRP steets)”, National Conference on Structural Concrete, BE2004, p. 783-790, 17-19 November 2004. 61. Barros, J.A.O.; Gouveia, A.V., “Centro de Solidariedade de Braga (Solidariety Center of Braga City”, National Conference on Structural Concrete, BE2004, p. 1267-1274, 17-19 November 2004. 60. Barros, J.A.O.; Antunes, J.A.B., “Reforço de pavimentos de edifícios industriais com laminados de fibras de carbono (Strengthening of concrete industrial floors using CFRP laminates according to the NSM technique)”, National Conference on Structural Concrete, BE2004, p. 767-774, 17-19 November 2004. 59. Ribeiro, A.F.; Barros, J.A.O.; Pereira, E.B.; Antunes, J.A.B., “Influência da idade nos parâmetros de fractura do betão auto-compactável reforçado com fibras de aço (Influence of the age on the fracture parameters of the steel fibre reinforced self-compacting concrete)”, National Conference on Structural Concrete, BE2004, p. 301-308, 17-19 November 2004. 58. Barros, J.A.O., “Materiais compósitos no reforço de estruturas (Composite materials for the structural strengthening)”, Civil´04 – Civil Engineering Seminar, University of Minho, Guimarães, 14 p., 2004. 57. Sena-Cruz, J.M.; Barros, J.A.O.; Gettu, R., “Comportamento da ligação de laminados de CFRP inseridos no betão sob acções cíclicas (Bond behaviour of CFRP laminates installed into concrete submitted to cyclic loading)”, 6º National Conference of Seismology and Seismic Engineering, p.591-600, 2004. 56. Barros, J.A.O., "Comportamento à flexão de betão reforçado com fibras de aço - caracterização experimental e conceitos para uso em projecto (Flexural behaviour of fibre reinforced concrete – experimental characterization and design concepts)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 2.1-2.13, 28 November 2003. 55. Ribeiro, A.F.; Cunha, V.M.C.F.; Barros, J.A.O.; Antunes, J.A.B., "Modelo de secção para dimensionamento à flexão de peças de betão armado (Cross section layer model for the design of reinforced concrete members failing in bending)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 3.1-3.17, 28 November 2003. 54. Cunha, V.M.C.F.; Barros, J.A.O., "Modelação do comportamento à flexão do BRFA com base em lei tensão-extensão (Modeling the flexural behavior of steel fibre reinforced concrete using a stress-strain constitutive law)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 5.1-5.25, 28 November 2003. 53. Ribeiro, A.F.; Barros, J.A.O., "Estratégia para determinar a lei tensão-abertura de fenda do BRFA (Strategy to obtain a stress-crack opening relationship for the steel fibre reinforced concrete)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 6.1-6.22, 28 November 2003. 52. Pereira, E.B.; Barros, J.A.O.; Camões, A.F.F.L., "Betão autocompactável reforçado com fibras de aço - Método racional de concepção (Steel fibre reinforced self-compacting concrete – a mix design rational method)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 13.1-13.14, 28 November 2003. 51. Antunes, J.A.B.; Barros, J.A.O., "Juntas em pavimentos de edifícios industriais (Joints in pavements of



industrial buildings)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 14.1-14.21, 28 November 2003. 50. Barros, J.A.O.; Ribeiro, A.F.; Cunha, V.M.C.F.; Antunes, J.A.B., "Fibras de aço no reforço ao corte de vigas de betão armado (Steel fibres for the shear resistance of RC beams)", Seminar on the design of steel fiber reinforced concrete structures, Eds. J. Barros, P. Rossi e B. Massicotte, Guimarães, p. 7.1-7.32, 28 November 2003. 49. Dias, S.J.E.; Barros, J.A.O., "Materiais compósitos de CFRP no reforço ao corte de vigas de betão armado (CFRP composite materials for the shear strengthening of RC beams)", III Portugal-Mozambique Engineering Conference, p. 539-550, 19-21 August 2003. 48. Ferreira, D.R.S.M.; Barros, J.A.O., "Confinamento de provetes cilíndricos de betão com mantas de CFRP - cintagem parcial e total (Confinement of concrete cylinder specimens with CFRP sheets – total and partial wrapping)", III Portugal-Mozambique Engineering Conference, p. 567-576, 19-21 August 2003. 47. Azevedo, A.F.M.; Barros, J.A.O.; Sena-Cruz, J.M.; Gouveia, A.V., "Software no ensino e no projecto de estruturas (Software for the teaching and for the structual design)", III Portugal-Mozambique Engineering Conference, p. 81-92, 19-21 August 2003. 46. Ribeiro, A.F.; Cunha, V.M.C.F.; Barros, J.A.O.; Antunes, J.A.B., "Avaliação da adequabilidade das leis propostas pela Rilem para caracterizar o comportamento fendilhadodo betão reforçado com fibras de aço (Assessing the appropriateness of the constitutive laws proposed by RILEM to characterize the behaviour of the cracked steel fibre reinforced concrete)", III Portugal-Mozambique Engineering Conference, p. 505-516, 19-21 August 2003. 45. Fortes, A.S.; Barros, J.A.O.; Padaratz, I.J., "Estudo comparativo de três técnicas de reforço à flexão com CFRP (A comparative study of three techniques for the flexural strengthening)", 45th Brazilian Conference on Concrete IBRACON, Vitória, Brazil, 16-20 August 2003. 44. Ferreira, D.R.S.M; Barros, J.A.O., "Mantas de CFRP no confinamento de elementos de betão submetidos a compressão (CFRP sheets for the confinement of concrete elements submitted to compression)", V Symposium EPUSP on Concrete Structures, 7-10 June 2003. 43. Barros, J.A.O.; Sena-Cruz, J.M.; Dias, S.J.E.; Ferreira, D.R.S.M; Fortes, A.S., "Investigação no âmbito da utilização de materiais compósitos no reforço de estruturas de betão (Research in the ambit of using composite materials for the strengthening of concrete structures)", V Symposium EPUSP on Concrete Structures, 7-10 June 2003. 42. Cunha, V.M.C.F.; Ribeiro, A.F.; Barros, J.A.O.; Antunes, J.A.B., "Betão reforçado com fibras de aço: recomendações normativas, investigação experimental e numérica (Steel fibre reinforced concrete: standards and experimental and numerical research)", V Symposium EPUSP on Concrete Structures, 7-10 June 2003. 41. Fortes, A.S.; Padaratz, I.J.; Barros, J.A.O.; Freire I.F., "Eficiência do reforço de CFRP em estruturas de concreto sob efeito térmico (Effectiveness of CFRP strengthening in concrete structures submitted to high temperatures)", V Symposium EPUSP on Concrete Structures, 7-10 June 2003. 40. Sena Cruz, J.M.; Barros, J.A.O., “Modelação da ligação de laminados de CFRP inseridos no betão de recobrimento (Modeling the bond behaviour between concrete and laminates inserted into concrete)”, VII Conference on Applied and Computational Mechanics, Ed. J. Barbosa, Évora University, Évora, p. 587 596, 2003. 39. Barros, J.A.O.; Antunes, J.A.B.; Amorim, J.A.S.B.A.; Fernandes, H.M.R., "Análise comparativa da eficácia de dois tipos de fibras de aço no reforço de elementos de betão (Effectiveness of two types of fibres for the concrete reinforcement)", Structural Concrete 2002, LNEC, p. 23-32, November 2002. 38. Lourenço, P.J.B.; Barros, J.A.O.; Oliveira, J.T., "Soluções industrializadas para cascas de betão com elementos cerâmicos incorporados (Industrialized solutions for shell structures including concrete and ceramic elements)", Structural Concrete 2002, LNEC, p. 213-222, November 2002. 37. Dias, S.J.E.; Barros, J.A.O., "Vigas de betão armado reforçadas ao corte com laminados de CFRP - uma técnica nova (CFRP laminates for the shear strengthening of RC beams – a new technique)", Structural Concrete 2002, LNEC, p. 223-232, November 2002. 36. Fortes, A.S.; Barros, J.A.O., "Desempenho de três técnicas de reforço à flexão de vigas de betão armado com CFRP (Performance of three CFRP techniques for the flexural strengthening of RC beams)", Structural Concrete 2002, LNEC, p. 233-242, November 2002. 35. Fortes, A.S.; Oliveira, J.T.; Barros, J.A.O., “Elementos de casca em alvenaria cerâmica reforçados com laminados de fibras de carbono (Masonry panels strengthened by CFRP laminates)”, VII International Seminar on Structural Masonry for Developing Countries, Belo Horizonte, Brazil, p. 391-397, 18-20 September 2002. 34. Oliveira, J.T.; Lourenço, P.J.B.; Barros, J.A.O., “Painéis de alvenaria cerâmica com juntas de concreto submetidos a ensaio de cisalhamento (Masonry panels with concrete joints submitted to shear)”, VII International Seminar on Structural Masonry for Developing Countries, Belo Horizonte, Brasil, p. 185-192, 18-20 September 2002. 33. Sena-Cruz, J.M.; Barros, J.A.O., “Comportamento da ligação de laminados de CFRP inseridos no betão (Bond behaviour of laminates inserted into concrete cover)”, National Conference of Structural Engineering, LNEC, Lisboa, p. 353-360, 10-13 July 2002. 32. Barros, J.A.O.; Antunes, J.A.B.; Amorim, J.A.S.B.A., “Eficácia de fibras discretas de aço no reforço à flexão de elementos de betão (Effectiveness of discrete steel fibres for the flexural reinforcement of concrete elements)”, National Conference of Structural Engineering, LNEC, Lisboa, p. 283-292, 10-13 July 2002. 31. Fortes, A.S.; Barros, J.A.O., “Reforço à flexão de vigas de betão armado por intermédio da inserção de laminados de CFRP no betão de recobrimento (Flexural strengthening of RC beams using laminates inserted into the concrete cover)”, National Conference of Structural Engineering, LNEC, Lisboa, p. 401-410, 10 13 July 2002. 30. Fortes, A.S.; Padaratz, I.J.; Barros, J.A.O., “Projecto de reforço à flexão com fibras FRP baseado nas recomendações do ACI 440 (Design FRP flexural strengthening solutions according to the recommendations of ACI 440)”, XXX South-American Conference on Structural Engineering, Brasília Univerisity, 27 31 May 2002. 29. Sena-Cruz, J.M.; Barros, J.A.O.; Portela, D., “Comportamento de vigas de betão armado reforçado com laminados de CFRP (Behaviour of RC beams strengthened with CFRP laminates)”, 4th National Conference on the Stress Experimental Analysis and Experimental Mechanics, High School of Tecnology and Management, Bragança, p. 57, 17-19 October 2001. 28. Barros, J.A.O.; Amorim, J.A.S.B.A.; Antunes, J.A.B.; Yining, D.; Fernandes, H., “Influência do tipo, percentagem e distribuição de fibras, idade do betão e quantidade de cinzas volantes no comportamento do betão reforçado com fibras de aço (Influence of the type, percentage and fibre distribution, concrete age and content of fly ash on the behaviour of steel fibre reinforced concrete)”, 4th National Conference on the Stress Experimental Analysis and Experimental Mechanics, High School of Tecnology and Management, Bragança, p. 55, 17-19 Outubro 2001. 27. Barros, J.A.O.; Amorim, J.A.S.B.A.; Antunes, J.A.B., “Avaliação da capacidade de absorção de energia do betão reforçado com fibras de aço segundo a proposta do RILEM (Energy absorption capacity of steel fibre reinforced concrete according to RILEM)”, 4th National Conference on the Stress Experimental Analysis and Experimental Mechanics, High School of Tecnology and Management, Bragança, p. 53, 17-19 Outubro 2001. 26. Camões, A.F.F.L.; Barros, J.A.O.; Aguiar, J.L.B.; Magalhães, M., “Avaliação do módulo de elasticidade de betão de elevado desempenho com cinzas volantes (Young’s Modulus of high performance concrete with fly ash)”, 4th National Conference on the Stress Experimental Analysis and Experimental Mechanics, High School of Tecnology and Management, Bragança, p. 135, 17-19 Outubro 2001. 25. Ferreira, D.R.S.M; Barros, J.A.O.; Lourenço, P.J.B., “Análise Experimental de Tensões em Laminados de Fibras de Carbono (Experimental stress analysis in carbon fibre reinforced laminates)”, 4th National Conference on the Stress Experimental Analysis and Experimental Mechanics, High School of Tecnology and Management, Bragança, p. 59-60, 17-19 Outubro 2001. 24. Barros, J.A.O.; Sena-Cruz, J.M.; Ferreira, D.R.S.M.; Lourenço, P.J.B., “Análise Experimental de Pilares de Betão Armado Reforçados com Laminados de Carbono sob Acções Cíclicas (Experimental analysis of RC columns strengthened by CFRP laminates submitted to cyclic loads)”, 5th National Conference of Seismology and Seismic Engineering, Civil Engineering Regional Laboratory, Ponta Delgada, Azores, p. 491-503, 24-27 October, 2001. 23. Barros, J.A.O.; Amorim, J.A.S.B.A.; Antunes, J.A.B., “Conceito de resistência equivalente em flexão do BFRA na verificação aos estados limites últimos e de utilização segundo o RILEM e o Eurocódigo (Equivalent flexural tensile strength parameters of SFRC on the verification of the serviceability and ultimate limite state analysis according to RILEM and Eurocode)” Seminar on the steel fibre reinforced concrete – recent



developments on the areas of the experimental characterization, design and applications, LNEC, p.2.1-2.14, June 2001. 22. Barros, J.A.O., “Caracterização do comportamento à flexão do betão reforçado com fibras segundo a proposta do RILEM (Characterization of the flexural behaviour of fibre reinforced concrete according to RILEM)” Seminar on the steel fibre reinforced concrete – recent developments on the areas of the experimental characterization, design and applications, LNEC, p.3.1-3.14, June 2001. 21. Barros, J.A.O., “Caracterização do betão reforçado com fibras de aço segundo as recomendações do RILEM (Characterization of the steel fibre reinforced concrete according to the RILEM recommendations)”, Standards on the experimental characterization of steel fibre reinforced concrete. Design and execução of industrial floors, UM, p. 4.1-4.21, January 2001 20. Ferreira, D.R.S.M; Barros, J.A.O.; Lourenço, P.J.B., “Pilares de betão armado reforçados com laminados de fibras de carbono (RC columns strengthened by CFRP laminates)”, 43th Brazilian Conference on Concrete, Foz do Iguaçu, I-069, p. 116, 18-22 August 2001. 19. Barros, J.A.O.; Ferreira, D.R.S.M.; Lourenço, P.J.B., ”Comportamento de pilares de betão armado reforçados com laminados de fibras de carbono (Behaviour of RC columns flexural strengthened by CFRP laminates)”, National Conference on Structural Concrete 2000, Porto, p. 393-402, 22-24 November 2000. 18. Camões, A.F.F.L.; Barros, J.A.O.; Aguiar, J.L.B, ”Comportamento à tracção em flexão de betões de desempenho melhorado (Tensile flexural behaviour of concrete of enhanced performance)”, National Conference on Structural Concrete 2000, Porto, p. 151-160, 22-24 November 2000. 17. Gouveia, A.V.; Barros, J.A.O.; Azevedo, A.F.M., ”Modelo de análise não linear material de pórticos de betão armado – calibração das relações constitutivas (Numerical model for the material nonlinear analysis of RC frames – calibration of the constitutive laws)”, National Conference on Structural Concrete 2000, Porto, p. 235-244, 22-24 November 2000. 16. Barros, J.A.O.; Ferreira, D.R.S.M.; Lourenço, P.J.B., ”Pilares de betão armado reforçados com laminados de fibras de carbono (RC columns flexural strengthened with CFRP laminates according to the NSM technique)”, REPAR 2000, National Conference on the structural rehabilitation and restauration, LNEC, Lisboa, p. 547-556, 14-17 June 2000. 15. Barros, J.A.O., “Lajes de betão reforçado com fibras de aço submetidas aos principais casos de carga (Steel fibre reinforced concrete slabs supported on soil submitted to the main load cases)”, VI Conference on Applied and Computational Mechanics, Aveiro, Vol. 1, p. 103-114, 17-19 April 2000. 14. Sena-Cruz, J.M.; Barros, J.A.O.; Delgado, R.M.; Costa, A.G., “Análise Experimental de elementos de viga de betão armado reforçado com fibras de aço sob acções ciclícas (Experimental analysis beams reinforced with steel fibres submitted to cyclic loading)”, 4th National Conference of Seismology and Seismic Engineering, High School of Technology of Algarve Univeristy, 27-29 October 1999. 13. Barros, J.A.O.; Sena-Cruz, J.M.; Ulrix, E., “Avaliação da energia de fractura em betões reforçados com fibras (Evaluating the fracture energy of fibre reinforced concrete)”, 3rd National Conference on the Stress Experimental Analysis and Experimental Mechanics, Porto, p. 135-136, 24-26 March 1999. 12. Barros, J.A.O.; Figueiras, J.A., “Análise de elementos de parede de betão armado (Analysis of elements of reinforced concrete walls)”, JPEE’98 Portuguese Conference of Structural Engineering, LNEC, Lisboa, p. 201-210, November 1998. 11. Barros, J.A.O.; Sena-Cruz, J.M.; Delgado R.M.; Costa, A.G., “Análise experimental de elementos de betão armado reforçado com fibras sob acções cíclicas (Experimental analysis of reinforced concrete elements including steel fibres and submitted to cyclic loading)”, JPEE’98 Portuguese Conference of Structural Engineering, Lisboa, LNEC, p. 421-430, November 1998. 10. Azevedo, A.F.M.; Barros, J.A.O.; Marques, E.R.B.; Branco, P.S.O., “Object oriented programming: Data preparation and visualization of FEM models”, National Conference of the Mechanical Computational, School of Engineering of Minho University, Guimarães, p. 575-584, October 1997. 9. Barros, J.A.O.; Figueiras, J.A., “Simulação numérica do comportamento de lajes de betão reforçado com fibras de aço apoiadas em solo (Numerical simulation of steel fibre reinforced concrete slabs supported on soil)”, 6th National Conference on pre-stressed structures, LNEC, Lisboa, p. 1-57 a 1-70, 27-29 November 1996. Livros (editor) 10. 2º Congresso Ibérico Betão Auto-Compactável, 1-2 de Julho 2010, Guimarães, Editores: Joaquim Barros, Aires Camões, José Sena-Cruz e Rui Miguel Ferreira, ISBN 978-972-8692-46-9, 200 Exemplares. 9. 8º Congresso Nacional de Mecânica Experimental 2010, 21-23 de Abril 2010, Guimarães, Editores: Graça Vasconcelos, Paulo Lourenço, Joaquim Barros, Filipe Samuel Silva, ISBN 978-972-8692-47-6, 200 Exemplares. 8. Encontro Nacional Betão Estrutural, 5 a 7 de Novembro 2008, Guimarães, Editores: Paulo B. Lourenço, Joaquim Barros, José Sena Cruz, Manuel Pipa, Rui Faria e Rui Miguel Ferreira, ISBN 978-989-95961-0-8, 500 Exemplares. 7. CCC2008 Challenges for Civil Construction, International Conference, Bridge Science and Application with Engineering Towards Innovative Solutions for Construction, Eds. A. Marques,L. Juvandes, A. Henriques, R. Faria, J.A.O. Barros, A. Ferreira, FEUP, Porto, Portugal, ISBN 978-972-752-100-5, 16-18 April 2008 (200 exemplares). 6. 1st US-Portugal International Workshop - Grand challenges in earthquake engineering - 250 years after the 1755 Lisbon Earthquake, Eds. J.A.O.Barros and P.F. Silva, ISBN: 972-8692-20-X, Lamego 11-14 July 2005 (100 publications). 5. Sísmica 2004, 6º Congresso Nacional de Sismologia e Engenharia Sísmica (6º National Conference of Seismology and Seismic Engineering), Eds. P.J.B. Lourenço, J.A.O. Barros and D.V. Oliveira, ISBN: 972-8692-15-3, DEC-EEUM, 14-16 April 2004 (300 publications) 4. Dimensionamento de estruturas de betão reforçado com fibras de aço (Seminar on the design of steel fiber reinforced concrete structures), Seminário, Eds. J.A.O. Barros (UM), P. Rossi (LCPC) and B. Massicotte (Montreal), ISBN: 972-8692-09-9, DEC-EEUM, 28/11/2003 (250 publications) 3. CCC 2001 Composites in Construction, Eds: J.A. Figueiras, L. Juvandes, R. Faria, A.T. Marques, A. Ferreira, J.A.O. Barros, J. Appleton, ISBN: 90 2651 858 7, FEUP, 10-12 October 2001. 2. Betão reforçado com fibras de aço – recentes desenvolvimentos nas áreas da caracterização experimental, cálculo e aplicação. Dimensionamento e execução de pavimentos (Seminar on the steel fibre reinforced concrete – recent developments on the areas of the experimental characterization, design and applications), Seminário, Eds. J.A.O. Barros, LNEC, 8/6/2001. (130 publications) 1. Normalização nos ensaios de caracterização experimental dos betões reforçados com fibras de aço. Dimensionamento e execução de pavimentos (Standards on the experimental characterization of steel fibre reinforced concrete. Design and execução of industrial floors), Eds. J.A.O. Barros, DEC-EEUM, 25/01/2001. (120 publications) Outras publicações Invited Lectures: 2. Barros, J.A.O., “Technology, design and applications of steel fibre reinforced self-compacting concrete”, 6th International Conference Fibre Concrete 2011 - Technology, Design, Application, CTU in Prague, Masarykova kolej, 8 and 9 September 2011. 1. Barros, J.A.O., “Steel fiber reinforced self-compacting concrete – from the material characterization to the structural analysis”, HAC2008, 1st Spanish Congress on Self-Compacting Concrete, Valencia, Spain, 31-58, 18-19 February, 2008.

10. Communications in scientific meetingsComunicações orais por convite "Integrated approach to explore new possibilities for structural applications of fiber reinforced self-compacting concrete", Seminat at the British Columbia University, Vancouver, Canada, 05 January 2009. "Betão reforçado com fibras", apresentada no Auditório da Sede da Ordem dos Engenheiros, no Seminário sobre “Novos Materiais para o Projecto de Estruturas”, em 19 de Março de 2009. "Fiber reinforced self-compacting concrete – from research to the applications", Seminar at Brescia University,



Brescia, Italy, 13 March 2009. "Fiber reinforced self-compacting concrete – from research to the applications", Seminar at the Politécnico di Milano, Milan, Italy, 11 March 2009. “Steel fiber reinforced self-compacting concrete – from the material characterization to the structural analysis”, HAC2008, 1st Spanish Congress on Self-Compacting Concrete, Valencia, Spain, 31-58, 18-19 February, 2008. (Keynote Lecturer) "Composite materials for the strengthening of reinforced concrete structures – theory and applications", Seminar at the Politechnique University of Dinamarca, DTU, in the scope of the Doctoral course in Structural Engineering, 09 January 2008. "Flexural and shear strengthening of reinforced concrete structures using composite materials.Theory and applications", apresentado na Universidade de Ferrara, Ferrara, Itália, em 27 Setembro de 2007. "Possibilidades e desafios do betão autocompactável reforçado com fibras", apresentado Seminário “Inovação em betões nova normalização de betões especiais, no âmbito da Construnor 2006, Parque de Exposições de Braga, 21 Setembro de 2006. "Centro de Solidariedade de Braga – Obra nomeada para o prémio Secil de Engenharia Civil 2005", apresentado no Instituto Politécnico de Viseu a Convite do Departamento de Engª Civil, Viseu, 11 Maio 2006. "Desempenho do sistema Mbrace Cut no reforço à flexão e ao corte de estruturas de betão", apresentado no Seminário BettoRepair organizado pela Bettor MBT, Ordem dos Engenheiros, Lisboa, 19 Maio 2004. "New approach on the using of laminate strips of CFRP for structural strengthening" apresentado no Comité 440-F-Repair-Strengthening do ACI, Vancouver, Canada, 31/03/2003. “Flexural behaviour of steel fibre reinforced concrete - experimental and numerical research”. Seminar at the Department of Civil Engineering of Polytechniq ue of Montreal, Canada, invited by Prof. Bruno Massicotte, 27 March 2003. “Concrete beams reinforced with carbon laminates bonded into slits”, 5º Congreso de Métodos Numéricos en Ingeniería, Madrid, 3-6 June 2002. “Laminate strips of CFRP on structural strengthening”. Palestra proferida no Departamento de de Engenharia Civil da Escola Politécnica de Montreal, Canada, a convite do Prof. Dr. Bruno Massicotte, 27 de Março de 2003. “Steel fibre reinforced shotcrete – experimental characterization and quality control”. Palestra apresentada na Universidade Politécnica da Catalunha, Barcelona, Espanha, a convite do Director do Laboratório desta Universidade, Dr. Ravindra Gettu, 11 de Dezembro de 2001. “Comparison between non linear finite element analysis and yield line analysis for designing ground supported floors”. Palestra apresentada na Universidade de Leuven, Bélgica, no Technical Meeting “New Dramix opportunities through design” organizado pela Bekaert NV, 26-28 de Janeiro de 2000. “Behaviour of steel fibre reinforced concrete – experimental and numerical approach”. Palestra apresentada na Universidade Politécnica da Catalunha, Barcelona, Espanha, a convite do Director do Laboratório desta Universidade, Dr. Ravindra Gettu, 29 de Outubro de 1999. Barros, J.A.O.; Pereira, E.B.; Ribeiro, A.F.; Antunes J.A.B., "Self compacting steel fibre reinforced concrete for precasted sandwich panels – experimental and numerical research", Workshop of 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, 24-25 de Setembro, 2004. Outras comunicações orais Cunha, V.M.C.F.; Barros, J.A.O.; Sena-Cruz, J.M., “Tensile behavior of steel fiber reinforced self-compacting concrete”, Sessão “Fiber-Reinforced Self-Consolidating Concrete”, Salons G&H, Hotel Marriott, New Orleans USA, 11 Novembro de 2009. Barros, J.A.O.; Lourenço, L.A.P.; Gonçalves, D.F.; Oliveira, F., “Inovative Structural Systems for Industrial Buildings using Fiber Reinforced Concrete and Material Nonlinear FEM-Based Models”, Congresso de Métodos Numéricos em Engenharia 2009, Barcelona, 29 Junho a 2 de Julho 2009. Barros, J.A.O.; di Prisco, M.; di Prisco, C., “Modelling FRC infrastructures taking into account the soil-structure interaction”, Congresso de Métodos Numéricos em Engenharia 2009, Barcelona, 29 Junho a 2 de Julho 2009. Barros, J.A.O.; Costa, I.G., “How shear resistance of RC beams is affected by cutting steel stirrups for installing NSM laminates for the flexural strengthening”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia, artigo 102, 13-15 July, 2009. Barros, J.A.O., “NSM Post-tensioned CFRP laminates for the flexural strengthening of RC beams”, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia, artigo 85, 13-15 July, 2009. Barros, J.A.O.; Gomes, A.C.T., “Laminados de CFRP pré-tensionados para o reforço à flexão de vigas de betão armado”, Betão Estrutural 2008, Guimarães, 5 a 7 de Novembro de 2008. Santos, P.F.S.; Barros, J.A.O.; Lourenço, L.A.P., “Steel fibres for the shear resistance of high strength concrete beams”, BEFIB 2008, 7th RILEM International Symposium on Fibre Reinforced Concrete Design and Applications, Artigo SIM01, 17-19 September, 2008. Barros, J.A.O.; Kotynia, R., “Possibilities and challenges of NSM for the flexural strengthening of RC structures”, Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, 22-24July 2008. Gomes, A.C.T.; Barros, J.A.O.; Dias, J.P.S.E., “CFRP group effect and interaction between stirrups and strips on the NSM-shear strengthening of RC beams”, Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, 22-24 July 2008. Dias, S.J.E.; Barros, J.A.O., “Behaviour of RC beams shear strengthening with NSM CFRP laminates”, Challenges for Civil Construction International Conference (CCC2008), Porto, Portugal, 16-18 April 2008. Barros, J.A.O., Pereira, E.N.B., Gouveia, A.V., Azevedo, A.F.M., “Numerical simulation of thin steel fiber self-compacting concrete structures”, ACI 435/544 Fall 2007 Puerto Rico Session 1: Deflection and stiffness issues in FRC and thin structural elements (Structural Implications and Material Properties), in CD, 25 pages, October 2007. Lima, J.L.T.; Barros, J.A.O., ”Design models for shear strengthening of reinforced concrete beams with externally bonded FRP composites: a statistical vs reliability approach”, FRPRCS-8, University of Patras, Patras, Greece, July 16-18, 2007. Bonaldo, E.; Barros, J.A.O.; Lourenço, P.J.B., ”Influence of the spacing between NSM-CFRP laminates on the flexural strengthening efficacy of RC slabs”, FRPRCS-8, University of Patras, Patras, Greece, July 16-18, 2007. Dias, S.J.E.; Barros, J.A.O., “NSM CFRP Laminates for the Shear Strengthening of T Section RC Beams”, 2nd International fib Congress, Naples, June 5-8, Artigo 10-58 em CD, 2006. Ferreira, D.R.S.M.; Barros, J.A.O., “Confinement efficacy of partially and fully wrapped CFRP systems in RC column prototypes”, 2nd International fib Congress, Naples, June 5-8, Artigo 10-20 em CD, 2006. Ferreira, D.R.S.M.; Barros, J.A.O., “CFRP-Based confinement strategies for RC columns-experimental and analytical research”, ISPIC, International Symposium in Concrete, Guimarães, Portugal, pp.261-272, 2-4 April 2006. Barros, J. A. O.; Gouveia, A. V., “Memória Descritiva e Justificativa do Projecto de Estabilidade do Edifício do Centro de Solidariedade de Braga”, Jornadas de Engenharia Civil, Instituto Politécnico de Viseu, 11 pp., 11 Maio 2006 Barros, J.A.O., "Reforço à flexão de cobertura de betão armado", JPEE 4as Jornadas Portuguesas de



Engenharia de Estruturas, artigo em CD, 13-16 de Dezembro de 2006. Dias, S.J.E.; Barros, J.A.O., “Shear Strengthening of RC beams with near-surface-mounted CFRP laminates”, 7th International Symposium on Fiber Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRP7RCS), Kansas, USA, SP-230-47, 807-824, 7-10 November 2005. Barros, J.A.O.; Gouveia, A.V.; Sena-Cruz, J.M.; Azevedo, A.F.M.; Antunes, J.A.B., “Design methods for steel fiber reinforced concrete industrial floors”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, CD, 22-24 August 2005. Pereira, E.B., Barros, J.A.O.; Cunha, V.M.C.F.; Santos S.P.F., “Compression and bending behavior of steel fiber reinforced self-compacting concrete”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, CD, 22-24 August 2005. Bonaldo, E., Barros, J.A.O.; Lourenço, P.J.B., “Concrete Slabs Strips Reinforced with Epoxy-bonded Carbon Laminates into Slits”, Third International Conference Construction Materials: Performance, Innovations and Structural Implications, Vancouver, August CD, 22-24, 2005. Barros, J.A.O.; Ferreira, D.R.S.M., “An efficient confinement strategy with CFRP sheets to increase the energy absorption capacity of concrete columns”, 1st US-Portugal International Workshop – Grand challenges in earthquake engineering, p. 13.1-13.8, Portugal, 11-14 July 2005. Barros, J.A.O.; Dias, S.J.E.; Fortes, A.S., “Near Surface Mounted thecnique for the flexural and shear strengthening of concrete beams”, INCOS’05 International Conference, p. 229-236, Coimbra, Portugal, June 2005. Pereira, E.B.; Barros, J.A.O.; Ribeiro, A.F.; Camões, A.F.F.L., "Post-cracking behaviour of selfcompacting steel fibre reinforced concrete", 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Vol. 2, pp. 1371-1380, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, 20-22 de Setembro, 2004. Barros, J.A.O.; Gettu, R.; Barragan, B.E., "Material Nonlinear analysis of Steel fibre reinforced concrete beams failing in shear", 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Vol. 1, pp. 711-720, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, 20-22 de Setembro, 2004. Seminário sobre Dimensionamento de estruturas de betão reforçadas com fibras de aço realizado na Escola de Engenharia da Universidade do Minho, 28/11/2003, tendo apresentado sete trabalhos. 3º Congresso Luso Moçambicano de Engenharia, 19-21 de Agosto de 2003, tendo apresentado três trabalhos. Moderador de um painel de oradores. V Simpósio EPUSP sobre Estruturas de Concreto, 7-10 Junho 2003, tendo apresentado dois trabalhos. RILEM TC 162 TDF Workshop, "Test and design methods for steelfibre reinfoced concrete - background and experiences", Ruhr-University Bochum, Institute for reinforced and prestressed concrete structures, 20-21 Março 2003, tendo apresentado um trabalho. 5th International Colloquium "Industrial Floors", Technique Academy Esslingen, Stuttgart, German, 21-23 Janeiro 2003, tendo apresentado um trabalho. Encontro Nacional Betão Estrutural 2002, LNEC, 27-29 Novembro 2002, tendo apresentado quatro trabalhos. Moderador da sessão nº 2 Comportamento e reabilitação de estruturas". Seminário sobre Paredes de Alvenaria - situação actual e novas tecnologias, 24 Outubro 2002. Moderador do terceiro quarto painel de oradores. 3rd International Conference on the Behaviour of Damaged Structures, Rio de Janeiro 27-30 Agosto 2002, tendo apresentado um trabalho. Chairman da palestra proferida pelo Prof. Sami H. Rizkalla da North Carolina State University, USA. Congresso Nacional da Engenharia de Estruturas, Lisboa, LNEC, 10-13 Julho 2002, tendo apresentado três trabalhos. III Seminário Internacional sobre Construções Históricas, 7-9 Novembro 2001, tendo sido Chairman de uma sessão. Composites in Construction International Conference, Porto, Portugal, 10-12 Outubro 2001, tendo apresentado um trabalho e tendo sido Chairman de uma sessão. 7th International Conference Inspection appraisal repairs & maintenance of Buildings & Structures, Nottingham Forest, 11-13 Setembro 2001, tendo apresentado um trabalho. Encontro Nacional Betão Estrutural 2000, Porto, FEUP, 22-24 Novembro 2000, tendo apresentado três trabalhos. REPAR 2000, Encontro Nacional sobre Conservação e Reabilitação de Estruturas, LNEC, 14-17 de Junho de 2000, tendo apresentado um trabalho. VI Congresso Nacional de Mecânica Aplicada e Computacional, Aveiro, 17-19 Abril 2000, tendo apresentado um trabalho. IV congreso de métodos numéricos en ingeniería, Sevilha, Julho 1999, tendo apresentado um trabalho. Integrability Rehability and Failure, Intenational Conference, 19-22 Julho 1999, Porto, tendo apresentado um trabalho. 3º Encontro Nacional de Análise Experimental de Tensões e Mecânica Experimental, Porto, 24-26 Março 1999, tendo apresentado um trabalho. JPEE’98 Jornadas Portuguesas de Engenharia de Estruturas, Lisboa, LNEC, Novembro, 1998, tendo apresentado um trabalho. International Conference of the European Ready Mixed Concrete Organization, ERMCO’98, Lisboa, 23-27 Junho 1998, tendo apresentado um trabalho. 1st International Conference on the Behaviour of Damaged Structures, Brasil, 20-22 Maio, 1998, tendo apresentado um trabalho. 2as Jornadas de Estruturas de Betão, FEUP, Porto, 24 de Abril, Ano 1998. I Conferencia Internacional sobre los Materiales Compuestos Aplicados en Arquitectura y Construcción, Sevilha, Outubro 1996, tendo apresentado um trabalho. 6º Encontro Nacional sobre Estruturas Pré-Esforçadas realizado em Lisboa no LNEC, 27-29 Novembro 1996, tendo apresentado um trabalho. 1as Jornadas de Estruturas de Betão, Betões de Elevado Desempenho, Novos Compósitos, realizado na FEUP em 18 Outubro 1996, tendo apresentado um trabalho. Betão Estrutural 1994, 2-4 Novembro 1994, tendo apresentado dois trabalhos. 10th International Conference on Experimental Mechanics realizado em Lisboa de 18-22 Julho 1994, tendo apresentado um trabalho. 4º Encontro Nacional sobre Estruturas Pré-esforçadas, LNEC, Lisboa, 19-21 Outubro 1992. JPEE de 20-23 Novembro 1990, em Lisboa, tendo apresentado um trabalho. EPMESC III realizado em Macau de 1-3 Agosto 1990, tendo apresentado dois trabalhos. X Congresso Ibero-Latino-Americano de métodos computacionais em Engenharia, Porto, de 25-27 Setembro 1989, tendo apresentado um trabalho.

11. LanguagesLanguage Reading Writing Conversation

Portuguese Very good Very good Very good

English Very good Very good Very good

Spanish Very good Basic Good

French Very good Basic Good

Italian Basic Basic Basic



curriculum vitae - departamento de engenharia civilisise/ · produced by an innovative vacuum...

Documents