curved handle serving tray - wordpress.com · curved handle serving tray 1. start by going through...
TRANSCRIPT
Curved Handle Serving Tray
1. Start by going through the STOCK
BREAKOUT procedure
2. Once you have the pieces cut to the proper
length, width and thickness (right) start by
making the tray sides (below)
Curved Handle Serving Tray
3. You can now either make
the ENDS or the HANDLES
4. Once all pieces are made
the assembly can be started
a. Glue sides to bottom
aligning the ends
b. Glue in ENDS using
dowel for alignment and strength
c. Glue in handles using
dowels for alignment and strength
5. Finish sanding/remove any
excess glue and apply finish
All diagrams are from Woodsmith magazine Vol.33/ No.196