cutting and grinding 2015 bellota uk

CUTTING AND GRINDING

152 153

MBox A mm B mmREF. £ NºD mmC mm MBox A mm B mmREF. £ D mmC mm

MBox A mm B mmREF. £ NºD mmC mm MBox A mm B mm

General purpose. Turbo. Pro7 REF. £ D mmC mm

AB



A

B

MBox A mm B mmREF. £ D mmC mm MBox A mm B mmREF. £ D mmC mm

MBox A mm B mmREF. £ D mmC mm

Diamond discs

Dry cutting discs are intended, both because of their diameters and their composition, to be used on portable machines where cooling is caused by air.Discs are chosen in function of the desired finish, the material to be cut, and the user’s preferences.

DRY CUTTING

General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion.Among these materials are roof tiles, concrete roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc.

General purpose. Segmenting. Professional 7 General purpose. Turbo. Professional 7

General purpose. Segmenting. Pro 7

DIAMOND

Hard materials. Segmenting. Professional 7 Hard materials. Turbo. Professional 7

Hard materials are considered to be those with extreme values of hardness and average abrasion. Among these materials are granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc.

Abrasive materials are considered to be those that are not very hard, but which wear out discs quickly because of their highly abrasive capacity.Among these materials are green concrete, aerated concrete blocks, old concrete, silica terrazzo, asphalt, normal brick, sandstone, etc.

Abrasive materials. Segmenting. Professional 7 Abrasive materials. Turbo. Professional 7

OTHER MATERIALS:

Within ceramic materials are tiles, Catalan tile, fired clay, etc. for use on floors and walls, both interior and exterior.

Ceramics. Continuous strip, Professional 7

Porcelain tile, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.

Porcelain tiles. Continuous strip, Professional 7

Reinforced concrete. Professional 10

It is a hard material because of the effect of the reinforcement, which conditions the composition of the binders of the disc

CUT

TIN

G A

ND

GR

IND

ING

GENERAL PURPOSE:

HARD MATERIALS:

ABRASIVE MATERIALS:

Benefits:• Maximum performance and service life of the disc.• Excellent cutting speed and capacity.• Large selection: discs for dry or wet cutting continuous, turbo or segmented.Features:• Top quality, large, octagonal shaped diamonds.• The diamonds are homogenous so that they are all of the same quality right around the rim of the disc.• Laser marking that prevents information from being lost or the disc blade slowing down or becoming

blunt.Use:• Dry cut discs to use in air cooled portable machines and wet cut discs to use in stationary water cooled

machines.

50702-11550702-12550702-18050702-230

4444

115125180230

22,222,222,222,2

24,33 26,01 41,16 48,19

89

1315

2,12,22,42,6

7777

051452051476051490051513

1111

50711-11550711-12550711-18050711-230

4444

115125180230

22,222,222,222,2

13,29

19,59 27,95 30,46

8101416

2,22,22,42,4

7777

405453405484405514405545

1111

50703-11550703-12550703-18050703-230

4444

115125180230

22,222,222,222,2

19,63

21,05 32,31 49,18

2,12,12,62,8

7777

051537051551051575051599

1111

50712-11550712-12550712-18050712-230

4444

115125180230

22,222,222,222,2

12,94

14,62 24,16 33,09

22

2,32,5

7777

405576405613405644405675

1111

50704-11550704-12550704-18050704-230

4444

115125180230

22,222,222,222,2

29,46 31,92 51,08 63,98

9101216

2,12,22,42,4

7777

051612051636051650051674

1111

50705-11550705-12550705-18050705-230

4444

115125180230

22,222,222,222,2

24,76 28,69 44,13 67,60

2,12,12,62,8

7777

051698051711051735051759

1111

50706-23050706-30050706-350

4 230300350

22,225,425,4

66,48 104,44

143,18

161821

2,62,83,2

777

051773051797051810

111

50707-23050707-30050707-350

4 230300350

22,225,425,4

76,66 124,89

140,38

2,533

777

051834051858051872

111

50722-11550722-125

44

115125

22,222,2

14,11

16,13

1,51,5

77

222838222890

11

50734-11550734-125

44

115125

22,222,2

20,41 23,25

1,61,6

77

525670525700

11

4 230 22,2 2,61050735-230 81,79 569308 1

154 155

A mm B mmREF. £ NºD mmC mm A mm B mmREF. £ NºD mmC mm

REF. A mm B mm£ NºD mmC mm

MBox A mm B mmREF. £ D mmC mm

BA

Cutting disc STAINLESS STEEL-METAL / THIN REF. £ g A mm B mm g A mm B mmREF. £

g A mm B mmREF. £

Cutting disc for stationary machine METAL REF. £ g A mm B mm

g A mm B mm

Cutting disc STONE REF. £

A

B

Wet cutting discs are intended, both because of their diameters and their composition, to be used for more intensive and continuous work, mainly with stationary machines, cooled with water.

General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion.Among these materials are roof tiles, concrete roof tiles, normal bricks, concrete blocks, hydraulic tiles, etc.

General purpose. Segmenting. Professional 10 General purpose. Segmenting. Professional 7

Hard materials. Segmenting. Professional 10

Among these materials are granite, klinker, quartzite, porphyry, cured concrete, etc.

Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.

Porcelain tiles. Continuous strip, Professional 7

DIAMOND / WET CUTTING FOR DIAMOND GRINDING

WET CUTTING FOR DIAMOND GRINDING

WET CUTTING FOR CERAMIC CUTTER

Advantages:• Excellent performance and accuracy.• Multipurpose use (fine and thick profiles; stainless steel and metal materials).• Wide range.Features:• High-quality raw materials.• Homogeneity of the discs over time.• Different types of grain, thicknesses and diameters of discs.• Complies with the EN-12413 standard.• Three qualities: Maxiplus, Professional and Dynamic.Uses:• For cutting, and grinding with electric portable or stationary machinery.

Cutting disc STAINLESS STEEL-METAL

PROFESSIONAL RANGE

Cutting disc STAINLESS STEEL-METAL

ABRASIVE DISCS FOR CUTTING AND GRINDING

5030050310 50320

Abrasive cutting and grinding discs

CUT

TIN

G A

ND

GR

IND

ING

GENERAL PURPOSE:

50708-30050708-350

300350

25,425,4

117,81

152,89

2024

2,83,2

1010

051896051919

11

50713-30050713-350

300350

25,425,4

71,65 87,78

2125

2,83

1010

405712314236

11

50724-30050724-350

300350

25,425,4

97,19 139,08

1821

2,83,2

1010

223491223569

11

50732-18050732-23050732-30050732-350

44

180230300350

25,425,425,425,4

47,54

71,78

118,03

153,71

1,61,62

2,2

7777

373479373486373493373516

1111

50300-11550300-12550310-11550310-12550320-18050320-230

25303647

100170

115125115125180230

22,222,222,222,222,222,2

1,10

1,21 1,17 1,33 2,10 2,25

AS 60 INOX - BFAS 60 INOX - BFAS 46 INOX - BFAS 46 INOX - BFAS 46 INOX - BFAS 46 INOX - BF

014785014808014822014839139617139679

252525252525

11

1,61,61,61,9

50330-11550330-12550330-18050330-230

3747

100170

115125180230

22,222,222,222,2

1,17 1,26 1,62 2,36

A 24 R - BFA 24 R - BFA 24 R - BFA 24 R - BF

373806374001374179374292

25252525

2,52,52,52,5

50301-11550301-12550301-15050301-18050301-230

6880115165282

115125150180230

22,222,222,222,222,2

1,17 1,26 1,54 1,62 2,36

A 24 R - BFA 24 R - BFA 24 R - BFA 24 R - BFA 24 R - BF

600711600728302721600735600742

2525252525

33333

50431-30050441-30050321-350

555555800

300300350

22,225,425,4

6,26

6,26

10,01

AS 24 S - BFAS 24 S - BFAS 24 S - BF

940961941005600926

252525

3,53,53,5

50302-11550302-12550302-230

5868

230

115125230

22,222,222,2

1,29 1,38 2,63

C 24 R - BFC 24 R -BFC 24 R - BF

600759600766600780

252525

333

C 60 T - BF

Cutting disc STONE / THINREF. £ g A mm B mm

50322-115 1,29 606768 25 30 115 22,2 1

156 157

Grinding disc STAINLESS STEEL-METAL / HARD REF. £ g A mm B mm

Grinding disc STAINLESS STEEL-METAL / SOFT REF. £ g A mm B mm

g A mm B mmREF. £g A mm B mmREF. £

g A mm B mm

Cutting disc METAL REF. £

Cutting disc STAINLESS STEEL-METAL / THIN REF. £ g A mm B mm

g A mm B mm

Cutting disc STONE REF. £

g A mm B mm

METAL – CORUNDUM (A) REF. £

STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ) REF. £ g A mm B mm

g A mm B mm

STONE – SILICON CARBIDE (SIC) REF. £

MAXIPLUS RANGE

Cutting disc STAINLESS STEEL-METALCutting disc STAINLESS STEEL-METAL

DYNAMIC RANGE

ABRASIVE DISCS FOR CUTTING AND GRINDING / PROFESSIONAL RANGE

Strip discs

Professional strip discs for surface finishing: maintenance work, finishing tasks repair of farming tools, welding, settings, etc.GRAIN:• A: universal, Ideal for steel, iron, wood.• AZ: demanding work, high removal capacity, ideal for stainless steel and forgery.• SIC: stone, glass, plastic – non-ferrous materials.SIZE OF GRAIN:• 40-60: average grain for rough surface finishes.• 80-120: fine grain for fine surface finishes.

POLYAMIDE BASE

Features:• Adequate flat base for flat surface finishes.• Does not stain or scratch the worked surface.• Improved disc usage as the nylon base can be worn during the work.• Cotton support fabrics that offer a very good finishing sensation and avoid burn marks on the material, making the discs to be very adequate for working with stainless steel• Longer useful life: +15% more filing capacity that fibreglass based discs.

For grinding work in steel sheets and cleaning of various surfaces (rust, paint).

For demanding grinding work in stainless steel and cas iron.

For grinding work in stone, plastics and non ferrous materials.

STRIP DISCS

CUT

TIN

G A

ND

GR

IND

ING

50351-11550351-12550351-18050351-230

170205405640

115125180230

22,222,222,222,2

1,68 1,89 3,24 4,36

A 30 T - BFA 30 T - BFA 30 T - BFA 30 T - BF

124422124552124828124958

10101010

7777

C 30 S - BF

Grinding disc STONEREF. £ g A mm B mm

50352-115 1,86 124576 10 150 115 22,2 7

50361-11550361-12550361-18050361-230

170205405640

115125180230

22,222,222,222,2

1,68

1,89 3,24

4,36

AS 30 Q - BFAS 30 Q - BFAS 30 Q - BFAS 30 Q - BF

125221125337125429125535

10101010

7777

50421-11550421-12550421-18050421-230

6880

165282

115125180230

22,222,222,222,2

1,52 1,63 2,11 3,06

AS 30 S - BFAS 30 S - BFAS 30 S - BFAS 30 S - BF

924596924633924671924718

25252525

3333

50480-11550480-12550480-18050480-230

6880

165282

115125180230

22,222,222,222,2

0,64

0,71 1,33 1,48

A 24 R - BFA 24 R - BFA 24 R - BFA 24 R - BF

446999512656512564447057

25252525

3333

50420-11550420-230

60245

115230

22,222,2

1,52 3,06

AS 30 S - BFAS 30 S - BF

388923389265

2525

2,52,5

50482-11550482-230

58230

115230

22,222,2

0,64 1,50

C 24 R - BFC 24 R - BF

447118447163

2525

33

50400-11550400-125

2535

115125

22,222,2

0,71 0,78

AS 60 INOX - BFAS 60 INOX - BF

556506586848

2525

11

50501-4050501-6050501-8050501-120

11210810192

115115115115

22,222,222,222,2

5,87 5,87 5,87 5,87

A 40A 60A 80

A 120

601152601169601176601220

10101010

50502-4050502-6050502-8050502-120

11210810192

115115115115

22,222,222,222,2

6,56 6,56 6,56 6,56

AZ 40AZ 60AZ 80

AZ 120

601190601206601213601237

10101010

50503-4050503-6050503-8050503-120

11210810192

115115115115

22,222,222,222,2

6,34

6,34 6,34 6,34

SIC 40SIC 60SIC 80

SIC 120

601244601251601268601275

10101010

158 159

g A mm B mm

METAL – CORUNDUM (A) REF. £

STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ) REF. £ g A mm B mm

g A mm B mm

STONE – SILICON CARBIDE (SIC) REF. £

Polyamide base discs stand REF. £

Fibreglass base discs exhibitor REF. £

REF. g A mm£ B mm H REF. g A mm£ B mm H

REF. g A mm£ B mm H REF. g A mm£ B mm H

B

A

g A mm

Brushes 50806-A REF. £ B mm H g A mm

Brushes 50806-I REF. £ B mm H

g A mm

Brushes 50806-L REF. £ B mm H

FIBREGLASS BASE

Features:• Fibreglass slanted base for edge finishing works.• Does not stain the worked surface.

For grinding work in steel sheets and cleaning of various surfaces (rust, paint).

For demanding grinding work in stainless steel and cas iron.

For grinding work in stone, plastics and non ferrous materials.

EXHIBITOR

395x265x135 mm

STRIP DISCS / FIBREGLASS BASE

395x265x135 mm

Advantages:• Excellent performance and accuracy for the job carried out.• Optimal finishes.• Comfortable brushing action.• Long-lasting tools.• Multipurpose.• Large range for different applications.Features:• High wear resistance.• High-quality raw materials.Uses:• For brushing, cleaning jobs, removing paint, varnish, flakes, rust and small burr.

Brushes

V: Max. r.p.m. H: Number of rows.

• For general light brushing jobs.• Stainless steel for stainless steel surfaces.• Brass wires for nonferrous metals and anti-spark jobs.• Without handle for tough jobs.• Plastic handle for difficult to access areas (slots, etc.).

HANDHELD BRUSHES

Brushes 50803

Brass. ø 0.3 corrugated wire.

Brushes 50804

Brass coated steel. ø 0.3 straight wire.

Brushes 50801

Brass coated steel. ø 0.3 straight wire.

Brushes 50802

Stainless steel. ø 0.3 straight wire.

BRUSHES

CUT

TIN

G A

ND

GR

IND

ING

Brass coated steel. ø 0.3 straight wire. Stainless steel. ø 0.3 corrugated wire.

Brass. ø 0.3 corrugated wire.

50513-4050513-6050513-8050513-120

80757065

115115115115

22,222,222,222,2

4,49 4,49 4,49 4,49

SIC 40SIC 60SIC 80

SIC 120

941548941579941609941630

10101010

50511-4050511-6050511-8050511-12050551-4050551-6050551-8050611-4050611-6050611-80

90807570909080

225220200

115115115115125125125180180180

22,222,222,222,222,222,222,222,222,222,2

4,10 4,10 4,10 4,10 4,66 4,66 4,66 8,07 8,07 8,07

A 40A 60A 80

A 120A 40A 60A 80A 40A 60A 80

941302941333941364941395300154300314300390941661941692941722

10101010101010101010

50512-4050512-6050512-8050512-12050552-40 50552-6050552-8050612-4050612-6050612-80

90807570

11011090

225220200

115115115115125125125180180180

22,222,222,222,222,222,222,222,222,222,2

4,66 4,66 4,66 4,66

5,18 5,18 5,18 8,15 8,15 8,15

AZ 40AZ 60AZ 80

AZ 120AZ 40AZ 60AZ 80AZ 40AZ 60AZ 80

941425941456941487941517300659300789300857941784941814941845

10101010101010101010

50954 155,60 608632 150953 218,98 608595 150511-40 - 10 50511-80 - 10 50512-40 - 1050512-80 - 10 50513-40 - 10 50513-80 - 10

50501-40 - 5 50501-80 - 5 50502-40 - 5 550502-80 - 5 50503-40 - 5 50503-80 - 5

50801-350801-450801-5

112140170

295295295

0,95 1,10 1,42

252525

345

372380372427372465

111

50803-350803-450803-5

112140170

295295295

2,02 2,70 3,61

252525

345

372625372663372700

111

50804-5 190 2101,68 35 5372748 1

50802-350802-450802-5

112140170

295295295

3,42 4,13 4,94

252525

345

372502372540372588

111

50806-A 38 2651,29 30 1372823 24 50806-I 38 2653,94 30 1372861 24

50806-L 38 2653,75 25 1372908 24

160 161

g A mm

Circular brushes 50807 REF. £ B mm V g A mm

Cup brushes 50808 REF. £ B mm V

gg A mmA mm

Drill brushes 50809 REF. £

Cup Brush 50808I REF. £ B mmB mm VV

g A mm

Brush stand 50850 REF. £ B mm C mm

B

A

gg A mmA mm

Spark plug cleaners 50805 REF. £

Spark plug cleaners 50805 REF. £ B mmB mm HH

REF. g gA mm A mm£

Brushes 50810 I REF. £B mm B mmH HV V

REF. g A mm£ B mm H V

B

A

REF. REF.g gA mm A mm£ £B mm B mmV V

REF. g A mm£ B mm V

• General used brushes for normal drills up to a maximum of 4,500 rpm.• Cleaning and removing paints, varnishes, rust, small burr from practically any material and relatively easy jobs.• 6 mm bolt.

DIY BRUSHES

Brass coated steel. ø 0.3 corrugated wire. Brass coated steel. ø 0.3 corrugated wire.

Brass coated steel. ø 0.3 corrugated wire.

BRUSHES / HANDHELD BRUSHES

Stainless steel. Wavy wire 0.3mm diameter

• Removing rust, paint and burr.• Braided wire recommended for jobs requiring increased brushing capacity.• Multi-axe adaptor.

CIRCULAR INDUSTRIAL BRUSHES

Brushes 50810

Brass coated steel. ø 0.3 corrugated wire. Supplied with up to ninedifferent axes.

Brushes 50811

Toughened steel. ø 0.5 braided wire.

• For working on large metal surfaces using angle grinders and mini grinders in areas which are difficultto access.

INDUSTRIAL CUP BRUSHES

Brushes 50812


Brushes 50813


CUT

TIN

G A

ND

GR

IND

ING

Stainless steel. Wavy wire 0.3 mm diameter.

Brush 50812 I


50805 L: Stainless steel. Wavy wire 0.3 mm diameter.50805 A: Wavy steel wire 0.15 mm diameter.

50809-2550808-50 I 5570 2550 2,004,97 3015 4.5004.500 373301633733 2424

50850 3.500 23060,60 380 400904031 1

50807-5050807-6050807-7550807-100

334270

105

506075

100

1,09 1,09 1,42 2,11

12131624

4.5004.5004.5004.500

373066373103373141373189

24242412

50808-5050808-7550808-80

63120196

507580

1,42 2,14 2,54

182523

4.5004.5004.500

373226373264936193

242412

50805 L50805 A 2020 133133 2,442,61 1515 33 633832633696 2424

50807-50 - 6 50807-75 - 6 50807-100 - 650808-50 - 6 50808-75 - 6 50809-25 - 6

50810-1001650810-1002050810-1251850810-1501850810-1502550810-2002050810-20025

50810-15025 I205229283450550790920

550100100125150150200200

1507,17 10,06

7,73

9,68

13,52

12,86

18,13

21,9516201818252025

255655757

78.0008.0008.0006.0006.0004.5004.500

6.000373387373424373462373547373585373707373745

6337951111111

12

50811-10050811-11550811-15050811-175

239272500686

100115150175

12,58 12,86 15,56 17,61

20233742

1111

12.50012.5009.0009.000

373783373936374124374162

1111

50812-8050812-10050812-125

50812-80 I230399620

23080100125

80 9,92 12,15 17,84

19,01 303035

228.5008.5006.500

8.500374209374247374285

633771111

12

50813-8050813-10050813-120

685875

1.065

80100120

14,14 15,04 18,98

222222

8.5008.5006.500

374322374360374407

111

162 163

g A mm

Brushes 50822 REF. £ B mm V g A mm

Brushes 50824 REF. £ B mm V

REF. g A mm£ B mm H V REF. g A mm£ B mm H V

REF. REF.g g

Brush 50818 I REF. £ g

A mm A mm

A mm

£ £B mm B mm

B mm

H HV V

V

Brushes 50814-75

REF. £ g A mm B V REF. £ g A mm B mm V

REF. £ g A mm B mm V

g A mm

Circular brushes 50825 REF. £ B mm V g A mm

Cup brushes 50826 REF. £ B mm V

g A mm

Drill brushes 50827 REF. £ B mm V g A mm

Industrial brush Stand 50851 REF. £ B mm C mm

B

A

• With 6 mm bolt to fit into drills.• Resin covered to provide: - Better performance and accuracy: the wire does not bend.- Maximum safety, the wire does not break off.

ENCAPSULATED INDUSTRIAL BRUSHES

Brass coated steel. ø 0.3 corrugated wire. Brass coated steel. ø 0.3 corrugated wire.

• For use with mini grinders.

CONICAL INDUSTRIAL BRUSHES

Brushes 50815


Brushes 50816

Stainless steel. ø 0.3 corrugated wire.

Brushes 50817


BRUSHES / INDUSTRIAL CUP BRUSHES

Use with mini grinders. Brass coated steel. ø 0.3 corrugated wire.

Brushes 50814-65

Use with mini grinders. Toughened steel. ø 0.5 braided wire.


• Nylon filaments with carbon silicate abrasive grains.• Thick grain 80 (red) and thin grain 180 (blue).

INDUSTRIAL FAN BRUSHES

Brushes 50829

• Manufactured with highly flexible nylon filaments preventing the breakage with carbon silicate abrasive grains.• Two types of grain: - Thick red, 80 grain. - Thin blue, 180 grain. • With 6 mm bolt to fit into standard drills.

INDUSTRIAL NYLON BRUSHES

CUT

TIN

G A

ND

GR

IND

ING

Brush 50817 I

Stainless steel. Braided wire 0.3 mm diameter.

50822-75 96 7510,53 30 15.000375084 24 50824-30 96 3110,53 25 15.000375169 24

50815-100150815-1002

181274

100100

9,92 18,51

2020

12

12.50012.500

374520374568

1212

50817-100150817-1151

50818-25 I

50817-1001 I215405

50

215100115

25

10010,44 12,15

5,80

22,322020

30

2012

112.50012.500

18.000

12.500374681374728

633757

6338181212

24

12

50816-100150816-1002

181274

100100

20,78 31,32

2020

12

12.50012.500

374605374643

1212

50814-75 215 75 9,63 30 12.500374445 1 50814-65 280 65 9,02 20 12.500374483 1

50825-75B50825-75F50825-100B50825-100F

7575

120120

7575

100100

4,22

4,41 5,12 5,31

16162323

4.5004.5004.5004.500

375244375602375329375282

24241212

50827-25B50827-25F

6767

2525

3,37 3,51

2525

4.5004.500

375565375527

2424

50826-50B50826-50F50826-75B50826-75F

7373

130130

50507575

4,13 4,22 4,41 4,56

18182525

4.5004.5004.5004.500

375404375367375480375442

24242424

50829-100B50829-100F

5,46 5,46

961034961072

1212

80120

100100

2525

3.5003.500

50851 1.125 230145,60 380 400213850 1

50825-75F - 3 50825-75B - 3 50825-100F - 350825-100B - 3 50826-75F - 3 50826-75B - 350826-50F - 3 50826-50B - 3 50827-25F - 350827-25B - 3 50829-100F - 3 50829-100B - 3

cutting and grinding 2015 bellota uk

Documents