cutting tools and procedures
DESCRIPTION
Cutting Tools and Procedures. Objectives: As a result of this lesson, students will be able to accomplish the following objectives: Identify and select appropriate cutting tools for a given project. Use cutting tools correctly and accurately when given a woodworking project. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/1.jpg)
Cutting Tools and Cutting Tools and ProceduresProcedures
Objectives: As a result of this lesson, students will be Objectives: As a result of this lesson, students will be able to accomplish the following objectives:able to accomplish the following objectives:
1.1. Identify and select appropriate cutting tools for Identify and select appropriate cutting tools for a given project.a given project.
2.2. Use cutting tools correctly and accurately when Use cutting tools correctly and accurately when given a woodworking project.given a woodworking project.
3.3. Read measurements within 1/16”.Read measurements within 1/16”.
4.4. Cut boards within 1/16” tolerance.Cut boards within 1/16” tolerance.
Essential Questions: What are the common hand cutting tools and the procedure for using them?
![Page 2: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/2.jpg)
Cross Cut Hand SawCross Cut Hand Saw
Used for cutting Used for cutting across the grain.across the grain.
8 to 12 teeth per 8 to 12 teeth per inch. The more inch. The more teeth per inch the teeth per inch the smoother the cut.smoother the cut.
![Page 3: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/3.jpg)
Rip HandsawRip Handsaw
Used to cut with Used to cut with the grain of the the grain of the wood.wood.
5 to 7 teeth per 5 to 7 teeth per inch.inch.
We do not have a We do not have a rip saw in the shop.rip saw in the shop.
![Page 4: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/4.jpg)
Back SawBack Saw
Has a thin blade with Has a thin blade with fine teeth with a fine teeth with a heavy piece of steel heavy piece of steel fitted over the back to fitted over the back to prevent it from prevent it from buckling.buckling.
Used to make flat Used to make flat bottom cuts such as, bottom cuts such as, dado cuts and rabbit dado cuts and rabbit cuts.cuts.
Only cuts on the Only cuts on the forward stroke.forward stroke.
![Page 5: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/5.jpg)
Key Hole or Compass SawKey Hole or Compass Saw
Used mostly for Used mostly for cutting holes in cutting holes in sheet rock/dry wallsheet rock/dry wall
![Page 6: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/6.jpg)
Coping SawCoping Saw
Used for cutting inside Used for cutting inside or outside curves.or outside curves.
Small blade will make Small blade will make sharp curves.sharp curves.
Can take blade off and Can take blade off and put through a hold to put through a hold to cut out holes.cut out holes.
Cuts on forward Cuts on forward stroke.stroke.
![Page 7: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/7.jpg)
Hole SawHole Saw
Used to cut holes Used to cut holes in boards.in boards.
Sizes range from Sizes range from ¾” to 5” plus.¾” to 5” plus.
Use with low Use with low speed.speed.
Works best to cut Works best to cut part way through part way through and then cut from and then cut from other side.other side.
![Page 8: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/8.jpg)
HacksawHacksaw
Used to cut metal.Used to cut metal. Only cuts on Only cuts on
forward stroke.forward stroke.
![Page 9: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/9.jpg)
Wood ChiselWood Chisel
Comes in widths ¼ Comes in widths ¼ inch to 1 ½ inch.inch to 1 ½ inch.
Wood chips out on Wood chips out on the beveled side.the beveled side.
Push by hand or Push by hand or use a mallet.use a mallet.
NEVER USE A NEVER USE A HAMMER!HAMMER!
![Page 10: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/10.jpg)
Jack PlaneJack Plane
14” or 15” long, 2” 14” or 15” long, 2” – 2 ½” wide.– 2 ½” wide.
Used for making Used for making straight, smooth straight, smooth edges.edges.
Can be used for Can be used for chamfers.chamfers.
Not for plywood or Not for plywood or end grain.end grain.
![Page 11: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/11.jpg)
Surform PlaneSurform Plane
Combination of Combination of rasp and plane.rasp and plane.
Works well for Works well for shaping wood.shaping wood.
![Page 12: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/12.jpg)
Wood RaspsWood Rasps
Used to smooth Used to smooth wood.wood.
![Page 13: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/13.jpg)
Test your knowledgeTest your knowledge
![Page 14: Cutting Tools and Procedures](https://reader036.vdocument.in/reader036/viewer/2022062517/568134bc550346895d9bdc89/html5/thumbnails/14.jpg)
Test your knowledge againTest your knowledge again