Page 1 of 15

السيرة الذاتية :الشخصية المعلومات- 1

سلوم احمد داود الجبوريأ.د. أألسم عراقية الجنسية

sajibury@mutah.edu.jo and salamd51@yahoo.com البريد األلكتروني Ext. 6176 237238-3-962+ تصالمعلومات اال

:المؤهالت العلمية - 2

لتخصصا الدولة السنة الجامعة تصاميم - هندسة ميكانيكية العراق 1976 بغداد البكالوريوس

وتحليل - ميكانيك تطبيقي المملكة المتحدة البريطانية 1981 ليدز الماجستير الصورة الرقمي

ترابولوجي - ميكانيك تطبيقي المملكة المتحدة البريطانية 1985 ليدز الدكتوراه وتحليل الصورة الرقمي

:األهتمامات البحثية والتدريسية - 3

strength of materials ,Stress analysis, Fatigue failures and Aero–Elasticity Mechanical Engineering Design, Machines Design (I and II). Composite materials and bearings materials Theory of Machines Advanced course in Stress Analysis Advanced Wear and friction theories Failure of rolling elements bearings using Acoustic Emission Technique Lubrication problems of the sliding surfaces Application of digital image processing to study the bearings lubrication Bearings design and Design of magnetic bearings Stability of gas bearings Machines, Mechanical and Manufacturing systems design Friction, wear of sliding surfaces and Surface roughness Operations research and Engineering management, Planning and Scheduling , Total Quality Management(TQM), production management and research methodology Powder metallurgy Hydraulic and pneumatic systems design Automatic control Static and dynamics Dies, Molds, Jigs & Fixtures Mechanical vibrations Calculus and Engineering Analysis

Finite differences and Numerical analysis Pneumatic and Hydraulic Systems and PLC applications Renewable, sustainable energy and energy management Design and analysis of Industrial systems Systems Engineering Fundamentals Human factors Measurements and Instruments systems Nano- Materials

:نشوراتمال - 4

Page 2 of 15

: الكتب تأليف(أ)

1- Advance course in Tribology, 1989 2- Tribology principals and applica ons, 1999 3- Principals of lubrica on, 2001 4- Strength of materials for graduate students, 2013 5- Strength of materials Laboratory for graduate students, 2013. 6- Principal of Tribology, by J. Halling, 1988. (Transla ng to Arabic) 7- Lubrica on, by A.R. Lansdowne, 1992.(Transla ng to Arabic) 8- Fric on, wear, Lubrica on (Tribology handbook) , by I.V. kraglesky, Vols.1,2 and 3,1994,1997,2001. (Transla ng to Arabic)

:المنشورة األبحاث )ب(

No. Paper Title

Journal Name

1 Concurrent modes of instability in Taylor Couette flow in journal bearings

Proc. of Taylor –vor ces ,vol.5 Nancy-France , pp. 122-133 ,1983

2 Application of digital image processing to study Taylor vortex flow

11th Leeds-Lyon Symposium on Tribology 1984 ,U.K

3 Multiple-Time dependent modes in Taylor-Couette flow

The Eng. Vol.15, pp. 76-95 ,1984

4 The adhesive wear of copper alloys under different sliding contacts

Eng. & Tech.,1986,pp.86-89

5 Abrasive wear characteristics of aluminum alloys

Eng. & Tech.,1987,vol.5,pp.15-30

6 The application of dimensions to the study of supper-laminar flow in journal bearing

Proc. of Lubrica on, Nancy, vol.9., France ,1988

7 The study of wear rate and friction coefficient characteristics of metallic pin-joints of crane’s track

M.E.C.,No2 , vol.18 , pp. 110- 127,1989

8 Tribological properties by the graphitic-aluminum alloys as bearing material

Wear ,vol.13, pp. 192- 211 , 1989

9 Friction and wear reduction in sliding surfaces bearing using polymer additives

J. of Eng., vol.6, 75- 87 ,1989

10 Analysis of gear performance working under thermal and two phase lubricant conditions

J. of MEC vol.32, pp. 113- 131 ,1990

11 Iron oxides and scuffing wear prevention Wear , vol. 12, pp.105, 1991

12 Wear and friction characteristics of dry multi-discs clutch

J. Eng. Com.,vol.17, pp. 17-29 , 1994

13 Failure detection of rolling element bearings using Acoustic Emission Technique(A.E.T.)

Proc. Of MCE. 3 rd ENG. SCI.CON. pp. 66-76 ,2000

Page 3 of 15

14 Performance of friction materials Journal of Tribology,vol.119,1995

15 Application of Acoustic Emission Technique (A.E.T.) to the study of abrasive wear of two aluminum alloys, 2024 and 2024-T

Journal of M.E.C. No.19, pp.186-205 , 2000

16

Performance analysis of ceramic plated clutch discs of heavy vehicles

Eng. & Tech., vol.118, pp. 144-163 ,1995 .

17 Measurement of fluid viscosity using spectral estimation method

Eng. & Tech. , vol.13,1996

18 The effect of misalignment on the operational characteristics of infinitely of journal bearing

Eng. & Tech. , vol.16, no. 5 , pp. 360 – 366 ,19967

19 Dynamic performance characteristics of externally pressurized gas lubricated J.B.

Tribology, no.1,vol.14, pp. 87-101 ,1997

20

The effect of bearing surface and foundation deformation on the performance of J.B. using EHL theory

The Eng. vol.63, pp. 151-163 ,Bagh.,1998

21 Thermal and dynamic stresses on compressor blades of aircraft engine

ASME, vol. 45 , pp. 78, 1998

22 Design Analysis of drum brake The Eng. ,vol.18 , pp. 17-31 ,1999

23 Effect of porosity of gears teeth surface on lubrication film performance

Eng.& Tech. ,vol.46,1999

24 Optimum life of engine blades of aircraft due to erosive wear

J. Eng. Soc. ,vol.17, pp. 10- 18 ,1999

25 Friction and wear of new and dismissed piston-rings of heavy duty vehicles

Journal of MEC. - vol.12 , No.19 pp156-1885, 2000

26 Thermal stress generated at gun barrel under different working conditions

Proc. of MCE 3 rd ENG. SCI. CON., pp. 129-141 , 2000

27 Design and construction of cracks detection system of aircraft wing using A.E.T

J. of Eng. Com. ,vol.12, pp. 72-79 , 2000

28 The influence of tooth profile on gear performance under dynamic loading

J. of Eng. vol.16, pp. 230-241 ,2000

29 Wing design and construction of unmanned aircraft

Journal A/C,vol.12, pp. 131-147 ,2001

30 Investigation of heat transfer between the surfaces during the relative motion between them

Proc. of Eng. Tech.8th, pp. 34- 47 ,2001

31 Analysis of aircraft bearings failure due to impact landing forces

Eng. & Tech.,vol.36,2001

Page 4 of 15

32 Investigation of properties and optimum design of fiber-reinforced composite shell of aircraft structure

ASME.vol. 40, pp. 182-194 ,2002

33 Design for parts made from powder metallurgy

Eng. & Tech.,vol.34, pp. 322- 331 ,2002

34 A study of wear and friction characteristics of turning and drilling tools

Eng. & Tech.,vol.37, pp. 297- 310 ,2002

35 Design and implementation of the active radial magnetic bearing

Eng. Tech., vol. 21, No. 17 , 2007

36 Corrosion Protection of steel reinforcement in concert

Eng. Tech., vol. 21, No. 17 , 2007

37 Acoustic Emission Technique to Detect the Failure of Sliding Journal Bearings

Muta'h Lil-Buhuth Wad-Dirasat (Natural and Applied Sciences Series), vol.(24), No.1 , , 2009

38 Analysis of the Wear rate of the I.C. engines by Inversion the Cylinder liner

Muta'h Lil-Buhuth Wad-Dirasat (Natural and Applied Sciences Series), vol.( 31 ), No.4 , , 2010

39 The Achievement of Safety Management in Arab Potash Company

Physical Sciences Research International

Vol. 2(4), December 2014,Full Length Research Paper

40 Medical Devices Service Life Cycle Cost Management in AL KARAK Hospital as a case study

Journal Account Market, vol. 4, 2015

41 Modeling and Managing of Random and Sudden Demand of Inventory

Proceeding of 5th GLOBAL ACADEMIC MEETING, GAM 2016, 24-26 March, Budapest, Hungary, ISBN 978-608-4642-48-0

42 Implementation of Total Management to Improve the Poultry Feed Manufacturing processes

Proceeding of 5th GLOBAL ACADEMIC MEETING, GAM 2016, 24-26 March, Budapest, Hungary ISBN 978-608-4642-48-0,

43 The Impact of Applying the Total Quality Management and Kaizen Methods on the Maintenance of Electricity and Water sectors

European Scien fic Journal August 2016, ed. Vol. 12,No. 24 ISSN 1857-7881 (print)e-ISSN 1857-7431

44 Implementation Of Quality Control Analysis Techniques On A Blood Product As A Case-Study

Proceeding of 4th annual interna onal interdisciplinary conference, aiic 2016, 27-29 May, PamukKale, Turkey European Scien fic, ISBN 978-608-4642-52-7

45 Role of Engineering Management in Reducing the Construction Projects Delay

International Journal of Managerial Studies and Research (IJMSR) Volume 5, Issue 2, February 2017, PP 91-99 ISSN 2349-0330 (Print) & ISSN 2349-0349 (Online) h p://dx.doi.org/10.20431/2349-0349.0502010 www.arcjournals.org

46 Work stress management in constructions industry and the contractor's commitment level with Labor law

Proceeding of 7th interna onal scien fic forum, isf 2017, 7-9 February, Oxford, UK European Scientific

Page 5 of 15

47 Wind Power Generation Utilizing a Special Buildings Layout Design To Enhance the Wind Speed

European Scien fic Journal February 2018, Edi on Vol. 14, No. 6, ISSN: 1857-7881 (print)e-ISSN: 1857-7431

48 Economic impact of thermal insulation of the building's envelope

12th Interna onal Scien fic Forum, ISF 2018, 26-27 April 2018, Prague, Czech Republic

49 Solar Energy Assessment of Molten Salts as Thermal Storage Mediums

Proceeding of 13th International Scientific Forum, ISF 2018, 04-06 October 2018, Fez, Morocco

50 Employees Brain Dominance Thinking Style Of Arab Potash Company

International Journal of General Engineering and Technology (IJGET) ISSN(P): 2278-9928; ISSN(E): 2278-9936 Vol. 8, Issue 1, Dec- Jan 2019; 19-38 © IASET

51 Smart residential house saving energy system

Proceedings year iii, issue 1 (4), Sofia, Bulgaria 2019 volume i “high technologies” ISSN 2535-0005(print, ISSN 2535-0013 (online), publisher: scientific technical union of mechanical Engineering Industry-4.0

52 Improving the Mechanical Properties of Conventional Materials by Nano-

Coating, Part-1

International scientific conference, Material science "non equilibrium phase transformations” 09-12 September, 2019, Varna, Bulgaria, proceeding, ISSN: (print) 2535-0218, ISSN: (online) 2535-0226

53 Conflict Management Of Construction Projects –A Case Study Kuwait International Airport Cargo City

International Journal of Mechanical Engineering (IJME) ISSN(P): 2319-2240; ISSN(E): 2319-2259 Vol. 8, Issue 3, Apr - May 2019; 45-54

54 Effective Application of Lean Manufacturing In Leading Industrial Company – A Case Study

International Journal of Mechanical ,Engineering (IJME) ISSN (P): 2319-2240; ISSN (E): 2319-2259 Vol. 9, Issue 1, Dec–Jan 2020; 21-42 , © IASET

55 Improving the Linearized stresses resistance by Nano-Coating, Part-2

Proceeding of International Scientific Conference

High Technologies. Business. Society

09-11.03.2020, Borovets, Bulgaria Year V, Issue 2 (8), Sofia, Bulgaria 2020 , Volume II

:االختراعبراءات - 5

باستخدام تقنية األنبعاث الصوتي )rolling elements bearings (ذات السرع العالية فشل المساند التدحرجة فحصلتصنيع منصة تصميم و - 11999

Photo-cell) 2001)تصميم وتصنيع منصة لفحص قياس السماحات القطرية والمحورية باستخدام طريقة الخلية الضوئية- 2

) باستخدام طريقة الخلية rolling elements bearings تصميم وتصنيع منصة لفحص قياس قوة األحتكاك ومعامل األحتكاك للمساند التدحرجة(- 3 Photo-cell) 2001)الضوئية

Page 6 of 15

ئز العلمية:الجوا - 6

الطالب المتميز على الجامعات العراقيةجائزة - 1 على الجامعات العراقية جائزة براءات األختراع في يوم العلم- 2 2003لغاية 1995جائزة المستشاري األكاديميين المتميزيين في الشركات من - 3 2012- 2011 المهرجان التكنولوجي السابع للجامعات األردنية- 4 2013- 2012 المهرجان التكنولوجي الثامن للجامعات األردنية- 5 2014- 20113 للجامعات األردنية التاسعالمهرجان التكنولوجي - 6 2015- 2014 للجامعات األردنية العاشرالمهرجان التكنولوجي - 7

- :أألشراف على رسائل الماجستير والدكتوراه - 7

التي اشرفت عليها: الماجستير رسائلعناوين (أ) الماجستير:

(1) The effect of bearing surface and foundation deformation on the performance of journal bearing using EHL theory. (1988)

(2) The adhesive wear of copper alloys under different sliding condi ons. (1989)

(3) Wear and fric on characteris cs of dry multi-discs clutch. (1998)

(4) Fric on and wear of new & dismissed piston-rings of heavy duty vehicles. (1990)

(5) Stress analysis at joints areas of aircra engines. (1991)

(6) The study of wear rate and fric on coefficient characteris cs of metallic pin-joints of crane’s track. (1992)

(7) Failure detec on of rolling element bearings using Acous cs Emission Technique (AET) . (1997)

(8) The effect of thermal deforma on on wear characteris cs of gun barrel. (1998)

(9) Thermal stress generated at gun barrel under different working condi ons. (2000)

(10) Studying of metal failure during the deep drawing process. (2000)

(11) Op mum life of engine blades of aircra due to erosive wear. (2001)

(12) Design and construc on of cracks detec on systems of A/C wing Using AET. (2001)

(13) Stress analysis of unmanned aircra wing. (2003)

(14) Theoretical and experimental investigation of heat-par on between surfaces in sliding contact. (2003)

(15) Engineering Management Op miza on of Machines, Equipments and Human Resources of Arab-Potash

Company LTD. (2011)

(16) Op mization of Acoustic and Dynamic Emission Random Signal Parameters using Statistical Methods. (2011)

(17) Simula on Study to Inves gate Running Cost Op miza on of Rock Wool Produc on in Jordan Rock Wool

Industries Company LTD. (2011)

(18) Modernize A Construc on Company Cost System Using Ac vity-Based Costing (ABC) and Activity-Based

Management (ABM) Methodology (2011)

(19) Engineering Management Role in Qualifying Private and Public Sectors to Join the World Trade Organiza on. (2011)

Page 7 of 15

(20) Managing and controlling Exis ng Maintenance Systems in Muta’h University Using Computerized

Maintenance management Systems (CMMS) (2011)

(21) Inves ga ng and Managing the safety Issues and Measures in Muta’h University Facili es (2011)

(22) Analysis of Work Place Design U lizing Engineering Management (2012 )

(23) Effect of Educa on Technologies Management on Students Performance In Muta’h University as a Case Study (2012)

(24) Value Engineering (E.V.) Awareness, Prac ce and Management to create sustainable Value in

Jordanian Industry Sector (2013)

( 25) Analysis of Engineering Maintenance Projects Management In Kuwait Education Ministry as a case Study (2013)

( 26 ) Analysis and Dissec on the Priori es of Pavement Networks Maintenance of the Al-Riyadh City- KSA(2013).

(27) The Impact of quality Control management of laboratories to reduce of costs of Engineering Tests ( 2014)

(28) Economic Benefit management of Applica on of Solar Energy Instead of Electric energy In Mutah

University as a Case Study ( 2014)

(29) Analysis of Engineering Maintenance projects Management in Kuwait Educa on Ministry ( 2013)

(30) Medical devices Life Cycle Cost Management I Al-Karak Hospital (2014)

(31) Modeling and Managing of Random and sudden demand of Inventory (2014)

(32) Produc on based on Decision Techniques Management (2015)

(33) Work stress management in construc on industry and contractors commitment level with Kuwaiti labor Law (2015)

(34) The role of engineering management of the sewage plant in the Solabyh to improve produc vity using solar

Energy (2015)

(35) The impact of applying the total quality management and Kaizen methods on maintenance of electricity

genera on plants in ministry of electricity and water in Kuwait 2015)

(36) Management and economic benefit study of application of solar energy instead of electrical energy in

Mutah University as a case study (2015)

(37) The effect of quality control management of the laboratories on reduc on the cost of engineering tests in

Kuwai ministry of defense as a case study (2015)

(38) The effect of applying total quality management to improve construc on projects in Kuwait ( 2015)

(39) Safety and risk construc on accidents in Jordanian construc on sector (2015)

(40) Effect applica on of Lean manufacturing on leading industrial company as a case study (2015)

(41) The impact of applying produc on management techniques on maintenance of electricity u li es in

Na onal electricity Power Company in Jordan as a case study (2015)

(42) Management of the essen al building design using Building Informa on Modeling (BIM), 2016

Page 8 of 15

(43) Sustainable supply chain management prac ces in Jordanian companies, 2016

(44) Energy management in feed industry in na onal poultry company as a case study, 2016

(45)The role of management to select the contracts and the technical specifications for the implemented

Materials in oil sectors, 2106

(46) U lizing a special buildings design to generate wind energy, 2016

(47) The role of engineering management to reduce cost of energy in thermal insulated buildings, 2016

( 48) Theore cal and experimental analysis of the salt capacity to store clean energy, 2016

(49) Design a renewable energy for the central bank of Qatar, 2016

(50) Design and verifica on of combined renewable energy resources, 2016

( 51) Design and verifica on of 3D solar energy tracking system in comparison with the fixed coordinates

System (2016)

(52) Design and implementa on poten al of an integrated management system for quality, environment and

Safety ( 2016)

(53) Safety management in the cyclic life of construc on projects, 2106

(54) Flexible manufacturing system in produc on lines, 2016

(55) Designing a smart residen al building energy management system, 2017

(56) The role of environmental assessment and planning in renewable energy diffusion in Jordan as a case study, 2017

(57) Designing a concentrated solar power of molten salt, 2017

(58) Quality improvement techniques in construc ons sector, 2017

(59) Stresses and strains Analysis around the air plane window, 2017

(60) A compara ve study of nano- materials and conven onal materials, (2017)

(61) A compara ve study of Concentrated Solar System (CSP) and Trough Solar Systems, (2017)

(62) Floa ng Photo-Voltaic system on Dead Sea waters (2017)

(63) Study and analysis of vibra ons problems in Al-Mujib pumping sta ons (2017)

(64) Access to clean energy through the special design of the buildings to enhance the wind energy (2017)

(65) Designing a Smart Residen al Building Management System (2018)

(66) Compara ve cost es ma on between Asphalt Pavement and Reinforced Concrete Pavement of Amman-

Aqaba Highway as case study (2018)

(67) Performance analysis of mechanical proper es of nano and conven onal materials (2018)

(68) The role of engineering management in the applica on of quality standards in construc on sector ( 2019)

(69) Applica on of Six Sigma in projects management (2019)

Page 9 of 15

(70) Role of employees and customers sa sfac on in product quality (2019)

(71) Design and Managing a micro grid control system for green building (2019)

(72) Impact of Human Factors on Quality Improvement of Produc on Systems (2020)

(73) Implementation of Total Productive Maintenance in Mining Industries (2020) (74) Applying the Value Engineering in Highway Projects to Improve Quality and Costs (2020) (75) Fundamental criteria for dialysis pa ents' sa sfac on through developing crucial factors for pa ents 2020)

(76) Sustainable Supply-Chain Management Prac ces In Jordanian Companies (2020)

(77) Implemen ng of Concentrated Solar Power for Salts Mel ng (2020)

ب) عناوين رسائل الدكتوراه التي اشرفت عليها:(

(1) Thermal and dynamic stresses of compressor blades of aircra engine (1998)

(2) The effect of piston-ring design of heavy vehicle engines on wear rate. (1999)

(3) The influence of tooth profile on gear performance under dynamics loading. (1999).

(4) Sta c and dynamic analysis of marina structure (2001)

(5) Corrosion protec on of steel reinforcement in concert (2002)

(6) Die design for parts made from powder metallurgy (2002)

(7) Inves ga on of proper es and op mum design of fiber-reinforced composite shell of aircraft Structure (2002)

(8) Aircra landing gear bearing failure due to impact loading forces during landing (2003)

(9) Design and implementa on of the ac ve radial magne c bearing (2003)

ث علمية:وأخر المؤتمرات العلمية التي شاركت بها ببح - 7

(1) 5th GLOBAL ACADEMIC MEETING, GAM 2016, 24-26 March, Budapest, Hungary (2) INTERNATIONAL SCIENTIFIC FORUM, ISF 2016 “Educa on, climate change and economic development” 21-23 April 2016, Rome, Italy

(3) 4th ANNUAL INTERNATIONAL INTERDISCIPLINARY CONFERENCE, AIIC 2016, 27-29 May, PamukKale, Turkey European Scientific (4) 13th International Scientific Forum, 4-6 October 2018, Fez, Morocco, Organizer: European Scientific Institute, ESI.

(5) 12th Interna onal Scien fic Forum ISF 2018, 26-27 April, Prague, Czech Republic

(6) ) Interna onal Scien fic Conference, High Technologies, Business. Society, 11-14.03.2019, Borovets, Bulgaria

(7) V International Scientific Conference, Матеrial Science "Nonequilibrium Phase Transformations, 09-12 September, 2019, Varna, Bulgaria (8) Interna onal Scien fic Conference High Technologies. Business. Society 09-12.03.2020, Borovets, Bulgaria

المساهمات في تصميم البرامج الدراسية - 8

:و العلياعلى مستوى الدراست األولية متها او ساهمت في تصميمهاناه اهم البرامج الدراسية التي صمفي اد

6- Syllabi and Courses Design:

The following courses for B.Sc., M.Sc., and PhD., Have been designed:-

Page 10 of 15

a- M.Sc and PhD -Syllabus courses design of Mechanical Eng. /Mechanical Eng./The Engineering college/

Baghdad-Iraq

b- M.Sc-Syllabus course design of Mechanical Eng./ Mechanical Eng. Dept / Engineering college/ Mutah

University.

c- B.Sc-Syllabus of Engineering Management course design/ Industrial systems Engineering Dept / Engineering

College/ Mutah University.

d- B.Sc-Syllabus of Aerospace Eng. course design/Mechanical Eng. Dept / Engineering college/ Mutah University.

e- B.Sc-Syllabus of Manufacturing and Industrial systems Engineering course design/ Industrial systems

Engineering./ Engineering college/Mutah University.

f- PhD -Syllabus of Engineering Management course design/ Industrial systems Engineering./ Engineering

college/ Mutah University.

g- B.SC -Syllabus of Sustainable and Renewable Energy course design/ Mechanical Engineering Dept./

Engineering college/ Mutah University.

h- M.Sc -Syllabus of Engineering Aviation Management course design/ Industrial systems

Engineering/ Engineering College / Mutah University

الخبرة العملية: - 9

9-1 Consultant for hydraulic systems and tools manufacturing company Al-Nad’a Company

(1996-2003), Baghdad- Iraq

9-2 Consultant for dies and moulds manufacturing company Badeer Company (1997-2003), Babel- Iraq

9-3 Projects consultant of Iraqi Engineers Community (1998-2003)

9-4 Consultant for wear, friction of sliding surfaces, Bearing Design, and Lubrication systems in Al-karama

9-5 General company, Baghdad- Iraq( 1996-2003) .

9-6 Maintenance Mechanical Engineer in engineering technical general company, Baghdad- Iraq( 1977-1980)

10- المواد التي قمت بتدريسها:

i- Strength of Materials.

j- Advanced course in Stress Analysis.

k- Advanced Wear and friction theories.

l- Mechanical Engineering Design, Machines Design (I and II).

m- Theory of Machines.

n- Theories of Failures in mechanics.

o- Engineering Analysis (i.e. application of mathematics to engineering problems).

p- Advance course in Mathematics.

q- Finite differences and Numerical analysis.

r- Fluid Mechanics.

s- Bearings design.

t- Lubrication of sliding surfaces.

u- Mechanical vibrations.

v- Principals of Tribology (see appendix-1).

w- Advance course in Tribology.

x- Pneumatic and Hydraulic Systems and PLC applications.

Page 11 of 15

y- Automatic control.

z- Static and dynamics.

aa- Dies, Molds, Jigs & Fixtures.

bb- Special topics in industrial systems engineering.

cc- Industrial Systems design.

dd- Calculus

ee- Production Management.

ff- Research Methodology

gg- Projects Management

hh- Total Quality Management (TQM).

ii- Projects Planning and Scheduling

jj- Energy management

kk- Human factors

ll- Measurements and Instruments systems

mm Systems Engineering Fundamentals الجامعات التي درست فيها: - 11

a) Faculty of Engineering- Leeds-University, U.K., 1984-1985. b) Engineering College – Baghdad, 1985-2003. c) Arabia College- Baghdad, 1995. d) Faculty of Engineering – University of Baghdad, 1989…2000. e) Faculty of Engineering – University of Al-Nahrian – Baghdad.1989-2003. f) University of Technology – Baghdad.1987……2005. g) Faculty of Al-Rashid for Engineering and Science – Baghdad.2003-2005. h) Faculty of Engineering – University of Mustanseria – Baghdad.1989…..1997. i) Faculty of Engineering-University of Muta’h, Kingdom of Jordan, 2005- to present.

:المواقع األدارية - 12

a. Head Of General Mechanical Engineering Department, 1992-1996 in Engineering College- Baghdad/ Iraq b. Head Of Mechanical Engineering Wing (Includes: General Mechanical Engineering dept., Materials Engineering dept., Aero-Space Engineering dept. , Armored Vehicles Engineering dept. and Artillery Engineering dept.) From 1996- 2003 In Engineering College – Baghdad/ Iraq. c. Postgraduates Tutor from 1996- 2003 In Engineering College – Baghdad/ Iraq. d. Head of Scien fic Promo ng Commi ee, 1998 -2002, In Engineering College – Baghdad/ Iraq. e. Head of Under Graduates Programs Commi ee, 1996-2000 In Engineering College - Baghdad/ Iraq. f. Postgraduates Tutor In Mechanical Engineering- College of Engineering/ Muta’h University- Jordan ( 2005 – 2010 ). g. Head of many promoting committees in College of Engineering/ Muta’h University- Kingdom of Jordan from 2005 to present. h. Fellow of ASTF (The Arab Science And Technology Foundation). i. Member of Engineering College Council In College of Engineering Muta’h University, 2009-2010 to Present. j. Fellow of Academic Keys (WWEHE- Who's Who In Engineering Higher Education). k. Head of commi ee engineering college plan from 2012 to present/ Mutah University- kingdom of Jordan l. Head of Industrial engineering department/ Mutah University- kingdom of Jordan ( 2013- to 2019 )

m. Head of Mechanical Engineering Department/Engineering faculty/ Muta'h University/ Jordan, Sept. 2020-till now

-مشروع واغلبها حصلت على جوائز او دعم مالي لتنفيذها من بعض المؤسسات : 300نماذج من مشاريع تخرخ البكالوريوس من -13

1- - Relationship between Acoustic Emitted from materials and their mechanical properties

2- Automatic non-destructive inspections of industrial products using Acoustic Emission and image processing technique.

Page 12 of 15

3- Full automa c quality control and 3D inspec ons of products

4- Mango-electric and clean power

5- Automated power saving of lights and heating of a classroom

6- Automated containers filling of industrial line

7- Full automatic drilling products industrial line

8- Wear rate and friction characteristics of slotted clutch

9- Composite reinforced fiber of A/C structure

14.10 Cartesian robo c for drilling.

10- Interior product defects inspection using Acoustic Emission Technique (AET)

11- Wear rate and friction characteristics of ceramic clutches of vehicles.

12- Production of parts from powder metallurgy.

13- Effect of sliding direction on wear rate and heat distribution of partial journal bearing

14- Landing impact force analysis of A/C wheel’s bearings

15- Design and construction PLC for a washing machine

16- Automated Packaging of tins in different boxes

17- Design and analysis of magnetic journal bearing

18- Wear rate and friction characteristics of I.C. engine under rotating piston-rings conditions

19- Wear rate and friction characteristics of I.C. engine under rotating cylinder-liner conditions.

20- Fracture and tensile tests of A/C structure using Acoustic Emission Technique (AET.

21- Redesign of the sealing between rotor and housing of Winkle engine.

22-Clean Power from Olive’s Peat.

23- Water is a promising fuel for jet engine.

24- Design an Electro- magnetic engine.

25- Generating an electric power from compressive force- displacement technique.

26-Autonomous machine for separating the harmful wastes to environment.

27- On-line three sensors earth-quick detector.

28- Energy generation due to unbalance masses mechanism.

29-………………………………….. (There many other)

Page 13 of 15

دعاسات توليد الطاقة الكهربائية برعاية وزير الطاقة والثروةمؤتة: افتتاح مشروع 21/3/2018في المعدنية/كلية الهندسة

الدكتور رعى معالي وزير الطاقة والثروة المعدنية الدكتور صالح الخرابشة حفل افتتاح مشروع دعاسات توليد الطاقة الكهربائية والذي يشرف عليه للطالب حيدر المشاعلة والطالب أحمد حماد والطالب مثنى العدوانسلوم أحمد الجبوري وهو مشروع

و السحبوحول الفكرة العلمية للمشروع أشار الجبوري بأنها تعتمد على مبدأ الخاصية العلمية للمعادن التي تتغير مقاومتها عندما تتعرض للضغط أ

المتقدمة صناعيا للبحث عن الطاقة النظيفة حيث يمكن تطبيقها واالستفادة والتقنية حسب المشرف على المشروع بدأت التجارب عليها في بعض الدول من حركة تجمعات الناس في األسواق المزدحمة وحركة المركبات في الشوارع

ص ولألردن وحسب علم المشرف (الجبوري) بأن هذا أول تطبيق من نوعه بهذه التقنية على المستوى اإلقليمي وهذا فخر كبير لجامعة مؤتة بشكل خا الغالي بشكل عام

ر عن وأما الدعم المالي للمشروع فهو مقدم من شركة سامسونج العالمية فرع األردن إذ قدم مشرف المشروع شكره للشركة على هذا الدعم الذي يعب دورها اإليجابي الفاعل

طالب ينتسب لمؤتة ويقدم لها تميزا وتألقا من الطبيعي أن رئيس الجامعة الدكتور ظافر الصرايرة عبر عن تقديره العميق ألي باحث أو أكاديمي أورتقاء يكون موضع فخر مستحق للوطن كله ال سيما وجاللة الملك عبدهللا الثاني ابن الحسين ومن خالل توجيهات ملكية سامية حث الجامعات على اال

األمل والجامعة حاضنة لشباب نوعي قادر ويمتلك عزيمة وفكرا يستطيع بمخرجاتها المعرفية وتفعيل فضاءات االبتكار واالبداع الشبابي فالشباب هو صنع الفارق وتحقيق اإلنجازات العلمية وهذا المشروع دليل على ذلك والمستقبل يعد بالمزيد

ت المكانة المرموقة في واضاف بأن كلية الهندسة من الكليات التي برهنت على قدرتها في تحقيق معايير الجودة واالرتقاء بمخرجاتها العلمية ذا االوساط االكاديمية

Page 14 of 15

ردني MOV.فديو التلفزون ا

21/3/2108

21/3/2108مقابلة مع التلفزيون األردني

Page 15 of 15

3/2108/ 21 جريدة الرأي األردنية