Rev 2020.10.16

Strong PermeabilityAntibacterial & Dust Proof

For Safety & Sanitation

Construction and demonstration video link

Packaging video link

▪ 5"x1" ▪ 1" Clear buttons. ▪ 15 standard colors.

Single use only. Dispose after use. These masks have been stored away from contaminated areas, sunlight, extreme temperatures, excessive moisture, and damaging chemicals. Packaging is in English. Boxes come with 5 packs of 10 masks each! A box should be able to supply a person for 2 months.

3-ply pleated design:1. Inner breathable and skin-friendly

non-woven layer2. Middle meltblown non-woven layer3. Outer non-woven layer

Orders Prepaid.

PFE (Particle Filtration Efficiency) filter >92%BFE (Bacterial Filtration Efficiency) filter >99%Lightweight, comfortable to wear.FR Fire Resistant

These masks are FDA, and CE certified: certification upon request.

25¢ EachCase Price - $500 R

40 Boxes(2000 Masks)

30¢ Each½ Case Price - $300 R

20 Boxes(1000 Masks)

37¢ Each¼ Case Price - $185 R

10 Boxes(500 Masks)

50

67¢(Blank)

75 150 250 500 $237 $192 $159 $135

5R (Printed)

CV126 Disposable Pleated Face Mask

CV132 Mask Extender Ear Saver

ASI 31260SAGE 50254UPIC ADCAPDIST. CENTRAL 119956

Rev 2020.10.16

bit.ly/2BfHPTz Classic Specialties Video

SMART Tiers® Fabric is a breathable dual layer Berry compliant proprietary fabric that was designed for enhanced comfort shirts using inherent chemical free properties that help your body perform better with more endurance.

PROTECT OTHERS:Moisture moves only from the inner layer to the outer layer.The hydrophobic (hates water) inner layer, which touches your skin, breaks the surface tension of your sweat, humidity, sneeze, cough, and saliva and moves it away from you to the outside layer. This polymer layer is also self extinguishing. Your skin stays comfortably cool and dry while protecting others. Because bacteria needs moisture to grow, fabric and skin are odor free. The inside will stay dry and not cling to your skin.

PROTECT YOURSELF:Moisture does NOT move from the outer layer to the inner layer. Moist contaminants are absorbed and dry particles are filtered in the hydrophilic (loves water) outer layer and STOP before the inner layer and do not touch your skin. The mask is protecting you. Because of electrical charge and the Browning effect, most particles smaller than the hole size are captured. Testing has been ongoing at the Nelson Laboratories and indications are two layers may provide class three NIOSH N95 protection as developments are underway to provide natural antimicrobial and repellency to the outer cotton layer. Currently because pressurized flow may penetrate; these masks are for Civil Use, not surgical.

Wearing a breathable SMART Tiers masks 24/7 is important during possible contact with viruses. Your body should stand a better chance of fighting a lesser quantity of viruses than a massive influx caused by removal of a mask or a leaky mask. We recommend alternating daily or washing daily. Fabric softener and dryer sheets are not recommended.

If you wish to print on mask, please contact us for details. SMART Tiers will not sublimate because mask is not polyester.

Sweat ManageMent and ReMoval technology (MADE IN USA) is behind the most comfortable reusable mask you can wear.

youtu.be/Wx09hXjS8-k

bit.ly/2W4gCKW Nelson Labs Report PDF

Rev 2020.10.16

▪ Machine wash & dry ▪ Stay cool ▪ Less sweat

▪ Glasses won’t fog ▪ Ear slit for comfort and stability

SMART Tiers Mini-Gaiter Mask

Quick turn around! These cut edge triangle bandanna masks stop 98% moisture particles while being breathable. This mask works all day with it’s inner polymer / cotton outer layers. Comes in white and assorted colors. Stays in place for easy usage. Material stretches for a one-size-fits-all adjustment. Adult bandannas measure approx. 26½ inches by 6 inches. Youth bandannas measure approx. 22½ inches by 5¼ inches.

Unfinished top and bottom. Shorter cut sides for hot weather use. Face and neck stay cool for all day usage. Stays in place with wide adjustable nose clip. Mask front slides down to neck for easy eating access, and won't fall off. Ear slots for extreme comfort.

▪ SMART Tiers wicking polymer-cotton material

▪ Reusable ▪ White and assorted colors ▪ Most comfortable / soft / breathable

▪ Sewn-in HD Comfortable 3½"x3∕8" flat nose clip for safety - Won't slip down nose

MADE IN THE USA

MADE IN THE USA

▪ SMART Tiers wicking polymer-cotton material ▪ Reusable ▪White and assorted colors ▪Most comfortable / soft / breathable ▪Washable ▪Civic use; certification underway ▪Coolest ▪ Less sweat ▪Glasses won’t fog ▪Ask about 12 pc samplers ▪ Printing available. ▪ Protect YOURSELF and OTHERS from Coughs, Sneezes, and Saliva!

New! Sleeker Summer Cut

MADE IN THE USA

SMART Tiers Triangle Bandanna

Shorter cut sides for hot weather use and hemmed top and bottom edge for a professional look. Face and neck stay cool for all day usage. Stays in place with wide adjustable nose clip. Nose slides down neck for easy eating access. Mask front slides down to neck for easy eating access, and won’t fall off. Ear slots for extreme comfort. Make sure you stop wet infectious respiratory particles by wearing this patented SMART Tiers dual layer mask! The tubular design, with its soft inner polymer/cotton outer layers, protects you from 98% incoming moisture-particles.

S M A R T Tiers Masks

New! Sleeker Summer Cut

75 150 250 500 $845 $810 $783 $765

Color 5R (Printed)

50

$697 (Blank)Co

lor

50

$399 (Blank)

75 150 250 500 $549 $519 $496 $480

White 5R (Printed)

75 150 250 500 $645 $610 $583 $564

Color 5R (Printed)

50

$482 (Blank)Co

lor

Whi

te

50

$190 (Blank)

75 150 250 500 $294 $278 $266 $257

5R (Printed)

50

$332 (Blank)

75 150 250 500 $456 $431 $412 $399

5R (Printed)

50

$599 (Blank)

75 150 250 500 $835 $790 $756 $732

5R (Printed)

50

$499 (Blank)

75 150 250 500 $647 $612 $585 $566

5R (Printed)

SMART Tiers wicking polymer-cotton material. With or without sewn-in nose clip. Extra soft, extra comfortable, ear straps. Semi-rigid vertical front serged seam for easier breathing. Reusable, washable. For extra large sizes, add 50¢ each (R).

CV129 SMART Tiers Triangle Adult Bandanna

CV122 SMART Tiers Triangle Adult with Sewn-in Clip

CV117 SMART Tiers Triangle Youth Bandanna

CV118 SMART Tiers Triangle Youth with Sewn-in Clip

CV120 Mini-Gaiter Adult MaskCV119 Mini-Gaiter Youth Mask

CV116 SMART Tiers Hemmed Deluxe Mini-Gaiter Adult MaskCV115 SMART Tiers Hemmed Deluxe Mini-Gaiter Youth Mask

CV121 SMART Tiers Soft Ear Loop Mask (No Sewn-in Clip)

CV123 SMART Tiers Soft Ear Loop Mask with Sewn-in Clip

ASI 31260 • SAGE 50254UPIC ADCAP

DIST. CENTRAL 119956

Rev 2020.10.16SMART Tiers

Masks Sponsor:

Abid Ali Synergy Dyeing & Finishing

2201 Mocaro Dr. Stateville, NC 28677

Christopher Acker electronically approved for

10 Jun 2020 06:13 (+00:00) Study Director Curtis Gerow Study Completion Date and Time

801-290-7500 | nelsonlabs.com | sales@nelsonlabs.com

dh FRT0005-0001 Rev 6 Page 1 of 2

These results apply to the samples as received and relate only to the test article listed in this report. Reports may not be reproduced except in their entirety. Subject to NL terms and conditions at www.nelsonlabs.com.

Latex Particle Challenge Final Report

Test Article: Smartier

Lot #001 Study Number: 1286755-S01

Study Received Date: 09 Apr 2020 Testing Facility: Nelson Laboratories, LLC

6280 S. Redwood Rd. Salt Lake City, UT 84123 U.S.A.

Test Procedure(s): Standard Test Protocol (STP) Number: STP0005 Rev 07 Deviation(s): Quality Event (QE) Number(s): QE22125

Summary: This procedure was performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article. Monodispersed polystyrene latex spheres (PSL) were nebulized (atomized), dried, and passed through the test article. The particles that passed through the test article were enumerated using a laser particle counter. A one-minute count was performed, with the test article in the system. A one-minute control count was performed, without a test article in the system, before and after each test article and the counts were averaged. Control counts were performed to determine the average number of particles delivered to the test article. The filtration efficiency was calculated using the number of particles penetrating the test article compared to the average of the control values. The procedure employed the basic particle filtration method described in ASTM F2299, with some exceptions; notably the procedure incorporated a non-neutralized challenge. In real use, particles carry a charge, thus this challenge represents a more natural state. The non-neutralized aerosol is also specified in the FDA guidance document on surgical face masks. All test method acceptance criteria were met. Testing was performed in compliance with US FDA good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820.

Test Side: Inside (Smoother) Side

Area Tested:

91.5 cm2 Particle Size: 0.1 µm

Laboratory Conditions: 21°C, 25% relative humidity (RH) at 0104; 21°C, 24% RH at 0214 Average Filtration Efficiency: 91.7%

Standard Deviation: 0.95

Study Number 1286755-S01 Latex Particle Challenge Final Report

801-290-7500 | nelsonlabs.com | sales@nelsonlabs.com dh FRT0005-0001 Rev 6

Page 2 of 2

Deviation Details: Controls and sample counts were conducted for one minute instead of an average of three one minute counts. This change shortens the total test time for each sample but will still provide an accurate determination of the particle counts. An equilibrate is a dwell period where the challenge is being applied to the test article for a certain period of time before test article counts are counted. The equilibrate period was reduced from 2 minutes to a minimum of 30 seconds which is sufficient time to clear the system of any residual particles, and establish a state of stable equilibrium before sample counts are taken. Test method acceptance criteria were met, results are valid.

Results: Test Article Number Test Article Counts Average Control Counts Filtration Efficiency (%)

1 1,215 13,654 91.1

2 1,077 14,626 92.6

3 955 13,416 92.9

4 1,215 13,797 91.2

5 1,297 14,190 90.9

Sponsor: Abid Ali

Synergy Dyeing & Finishing 2201 Mocaro Dr.

Stateville, NC 28677

Christopher Acker electronically approved for

10 Jun 2020 06:13 (+00:00) Study Director Curtis Gerow Study Completion Date and Time

801-290-7500 | nelsonlabs.com | sales@nelsonlabs.com

dh FRT0005-0001 Rev 6 Page 1 of 2

These results apply to the samples as received and relate only to the test article listed in this report. Reports may not be reproduced except in their entirety. Subject to NL terms and conditions at www.nelsonlabs.com.

Latex Particle Challenge Final Report

Test Article: Smartier

Lot #001 Study Number: 1286755-S01

Study Received Date: 09 Apr 2020 Testing Facility: Nelson Laboratories, LLC

6280 S. Redwood Rd. Salt Lake City, UT 84123 U.S.A.

Test Procedure(s): Standard Test Protocol (STP) Number: STP0005 Rev 07 Deviation(s): Quality Event (QE) Number(s): QE22125

Summary: This procedure was performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article. Monodispersed polystyrene latex spheres (PSL) were nebulized (atomized), dried, and passed through the test article. The particles that passed through the test article were enumerated using a laser particle counter. A one-minute count was performed, with the test article in the system. A one-minute control count was performed, without a test article in the system, before and after each test article and the counts were averaged. Control counts were performed to determine the average number of particles delivered to the test article. The filtration efficiency was calculated using the number of particles penetrating the test article compared to the average of the control values. The procedure employed the basic particle filtration method described in ASTM F2299, with some exceptions; notably the procedure incorporated a non-neutralized challenge. In real use, particles carry a charge, thus this challenge represents a more natural state. The non-neutralized aerosol is also specified in the FDA guidance document on surgical face masks. All test method acceptance criteria were met. Testing was performed in compliance with US FDA good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820.

Test Side: Inside (Smoother) Side

Area Tested:

91.5 cm2 Particle Size: 0.1 µm

Laboratory Conditions: 21°C, 25% relative humidity (RH) at 0104; 21°C, 24% RH at 0214 Average Filtration Efficiency: 91.7%

Standard Deviation: 0.95

Study Number 1286755-S01 Latex Particle Challenge Final Report

801-290-7500 | nelsonlabs.com | sales@nelsonlabs.com dh FRT0005-0001 Rev 6

Page 2 of 2

Deviation Details: Controls and sample counts were conducted for one minute instead of an average of three one minute counts. This change shortens the total test time for each sample but will still provide an accurate determination of the particle counts. An equilibrate is a dwell period where the challenge is being applied to the test article for a certain period of time before test article counts are counted. The equilibrate period was reduced from 2 minutes to a minimum of 30 seconds which is sufficient time to clear the system of any residual particles, and establish a state of stable equilibrium before sample counts are taken. Test method acceptance criteria were met, results are valid.

Results: Test Article Number Test Article Counts Average Control Counts Filtration Efficiency (%)

1 1,215 13,654 91.1

2 1,077 14,626 92.6

3 955 13,416 92.9

4 1,215 13,797 91.2

5 1,297 14,190 90.9

Sponsor: Abid Ali

Synergy Dyeing & Finishing 2201 Mocaro Dr.

Stateville, NC 28677

Christopher Acker electronically approved for

10 Jun 2020 06:13 (+00:00) Study Director Curtis Gerow Study Completion Date and Time

801-290-7500 | nelsonlabs.com | sales@nelsonlabs.com

dh FRT0005-0001 Rev 6 Page 1 of 2

These results apply to the samples as received and relate only to the test article listed in this report. Reports may not be reproduced except in their entirety. Subject to NL terms and conditions at www.nelsonlabs.com.

Latex Particle Challenge Final Report

Test Article: Smartier

Lot #001 Study Number: 1286755-S01

Study Received Date: 09 Apr 2020 Testing Facility: Nelson Laboratories, LLC

6280 S. Redwood Rd. Salt Lake City, UT 84123 U.S.A.

Test Procedure(s): Standard Test Protocol (STP) Number: STP0005 Rev 07 Deviation(s): Quality Event (QE) Number(s): QE22125

Summary: This procedure was performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article. Monodispersed polystyrene latex spheres (PSL) were nebulized (atomized), dried, and passed through the test article. The particles that passed through the test article were enumerated using a laser particle counter. A one-minute count was performed, with the test article in the system. A one-minute control count was performed, without a test article in the system, before and after each test article and the counts were averaged. Control counts were performed to determine the average number of particles delivered to the test article. The filtration efficiency was calculated using the number of particles penetrating the test article compared to the average of the control values. The procedure employed the basic particle filtration method described in ASTM F2299, with some exceptions; notably the procedure incorporated a non-neutralized challenge. In real use, particles carry a charge, thus this challenge represents a more natural state. The non-neutralized aerosol is also specified in the FDA guidance document on surgical face masks. All test method acceptance criteria were met. Testing was performed in compliance with US FDA good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820.

Test Side: Inside (Smoother) Side

Area Tested:

91.5 cm2 Particle Size: 0.1 µm

Laboratory Conditions: 21°C, 25% relative humidity (RH) at 0104; 21°C, 24% RH at 0214 Average Filtration Efficiency: 91.7%

Standard Deviation: 0.95

Rev 2020.10.16

CV001 CV006 CV027 CV028

CV029 CV065 CV068 CV069

CV071 CV075 CV078 CV087

CV099 CV106 CV107 CV109

CV113 CV138 CV139 CV040

CV141 CV142 CV143

Rev 2020.10.16

Silky Polyester Bandana Masks

The fashionable polyester mask are machine-washable featuring comfortable ear straps. Vibrant designs and a poly-pro filter liner, make this eye-catching mask an easy purchase.

Imported, in stock, 100% Polyester. Worn as a triangle, the bandanna stretches to 34"x8" to easily make a 2-layer mask for 2-layer protection. Twenty-three different designs to choose from. Use as a popular designer fashion scarf, tie around your face for a timely COVID-19 prevention mask, or use as a head-wrap to keep stray hair out of your face! 19"x19".

Timeless patterns with bold contrast on each design make this a winning fashion accessory. Soft silky feel, this is a sophisticated office accessory, sporty weekend wear, and perfect for all seasons. Makes a a great gift that is fashionable, practical, and ideal for travel. Neck scarf, head scarf, hair tie, purse scarf, shawl or wrap.

Gently wash and dry; lay flat or line hang to dry.

Nose Clip02873Optional sewn-in nose clip.

50

$125 Each

50

$667 (Blank)

$159 Additional

CV200 Party Mask

BA132 19”x19” Silky Polyester Bandanna

ASI 31260SAGE 50254UPIC ADCAPDIST. CENTRAL 119956

Rev 2020.10.16

If you are in need of medical KN95 face masks, this is the place for you! Here you will find the highest quality KN95 face masks at the most affordable pricing.

Stay Safe and Stay Healthy!

Better protection! This mask is designed to offer more protection than a standard disposable mask. The lightweight mask allows for folding and easier portability. Includes adjustable nose clip. Packaging is in English. Boxes come with 10 packs of 5 masks each! A box should be able to supply a person for 2 months.

• Not for children• Should be stored in a cool and dry place• Should be used immediately once removed from bag

and should not be placed on any dirty surface• Should never be used if it is visibly damaged or

contaminated• Should not be used more than once• Should be disposed away properly after 1 use• It does not cure any medical conditions; it is intended to

be used as a means of protection and prevention only

These masks are FDA, and CE certified: certification upon request.

$315 EachBox Price: $15750 R1 Box = 50 Masks

CV127 KN95Protective Mask

ASI 31260SAGE 50254UPIC ADCAPDIST. CENTRAL 119956

Rev 2020.10.16

Domestic Made to Order or Import Ready to Go!

►White Dimpled Polypropylene► ►Light Blue Woven Polyester►

These medical gowns are the perfect cover-up for patients and healthcare workers, as it covers the torso, arms, and down to the knees. The elasticized wrists keep arms from exposure. Be sure to get this comfortable and reliable effective protection.

▪ Sewn at the sides for total coverage ▪ Long sleeves and elastic at wrists ▪ Self-binding ties on neck

▪ Domestic version has self-binding ties at front that wrap to the back for a one-size-fits-most fit.

Keeps hair and sweat back!

These disposable shoe covers protect floors from tracked dirt.

▪ White dimpled polypropylene

▪ Universal size; Pair ▪ Disposable

▪ Can be lightly washed

▪ Non-skid print available.

Disposable Medical Gowns / Bouffants

Keeps hair and sweat back!

50

$884 R (Blank)

50 Pairs

$315 R (Blank)

50

$244 R (Blank)

50

$182 R (Blank)

CV131 Domestic Dimple Tie-String Medical Cap

CV101 Domestic Dimple Medical Gown

CV110 Domestic Dimple Shoe Covers

CV130Domestic Dimple Elastic Medical Bouffant

ASI 31260SAGE 50254UPIC ADCAPDIST. CENTRAL 119956