8/22/2019 cv_159

1/3

CurriculumVitaePersonalInformation:Name:Khaled Ziad Hamzeh.

Date of birth: 13 / Dec / 1985Nationality: JordanianPlace of birth: Amman-Jordan.

Address: Al-Khobar KSA.

Mobile phone, KSA: 00966546600232Jordan: 00962796591296

E-mail: khel1985@yahoo.com

Objectives:I am working to improve my skills, gain an experience especially in construction engineering

management field, and seeking deeply to add exceptional improvement to my profession as well as

my employer organization.

WorkExperience:Joined Arabian BEMCO contracting company in KSA as Electrical Design Engineer since April2008 until present in Engineering department, current position is Senior Electrical Engineer.

I have been assigned at the following projects:

Qurayyah power plant Extension-1, Block-6 open and combined cycle power plant.This project is the first extension of Qurayyah-II power plant, consist of three gas turbine

7FA GE make, and one steam turbine with three HRSG units.

I have been assigned as a Senior Electrical Engineer at the site engineering department.Duration: April, 2011 - presentPosition: Senior Electrical Engineer

Main Assignments:

1- Prepare and review Layout drawings of power distribution system and lightingsystems.

2- Prepare and review the Panel board Schedules and one line diagrams3- Prepare and review Substation and Equipment Arrangement drawings.4- Review the Elementary and Interconnection Diagrams5- Prepare the Specifications and requisitions for electrical equipment and bulk material

items.

6- Determine the Construction/Detailed Engineering Scope of Work and Specifications7- Expediting all the electrical drawings and design and follow up closely with theclient.

8- Review all the submittal and drawings and prior submit them to the client.9- Provide Site feedback to the design office.10-Coordinator between the designer and the construction site for the electrical side.11-Prepare the necessary field change notice as per sit conditions and updates.12-Prepare the details design for the electrical ductbanks and manholes, as well as other

low voltage system.

8/22/2019 cv_159

2/3

Conversion of Qurayyah II open cycle to combined cycle power plant project.The project target is to convert the Qurayyah open cycle power plant to combined cycle

power plant, it consists of five 335 MW Steam Turbine GE make with 15 Heat recoverysteam generator DOOSAN make, total contract value is 7.8 billion SR.

Duration: July, 2010 April, 2011Position: Electrical Engineer

Main Assignments:

1- Coordinator between the designer and the construction site for the electrical side.2- Lead electrical material takes off team and place the order for the needed materials.3- Assist Engineering manager.4- Compares the electrical materials quotations and approve them.5- Review the electrical drawings for the medium and low voltage switchgear,

transformers, and different low current system.6- Manage and resolve the technical queries raised by construction site.

Construction of Qurayyah II Open Cycle Power Plant project.Qurayyah II Power plant consists of 15 GE 7FA Gas turbine units with total power of2400 MW. The total contract value is 3 billion SR.

Duration: April, 2008 present

Position: Electrical Engineer

Main Assignments:

1- Prepare the design for cable support and management systems (electrical duct bank,conduiting, and cable tray).

2- Prepare the general arrangement drawings of switchgear rooms and control rooms.3- Study and reply the client comments on different electrical systems, and do the

necessary modifications as per the comments.

4- Prepare and review Electrical design for lighting system and small power distributionsystems.

5- Prepare materials takeoff for different electrical systems (cable tray, duct bank,lighting, fire alarm, small power systems, grounding, public address, etc...).

6- Makes voltage drop calculations and cables sizing.7- Review protection and control system for the transformers, motors and switchgears.8- Review design of fire alarm, Public address, HVAC BMS, systems in plant a

materials takeoff for the same systems.

9- Assist Engineering manager.10-Reply on site engineers queries and do the necessary design changes as per site

conditions.

11-Manage and close engineering punch list items.

8/22/2019 cv_159

3/3

EducationBackground: Feb. 2011- present

Master of Engineering in construction engineering and management at king FahdUniversity of petroleum and minerals (KFUPM), Dhahran, KSA.

Oct 2003- Jan 2008B.Sc. Degree inMechatronics Engineering, Faculty of Engineering & Technology,University of Jordan.

- GPA: (3.78 / 4) ExcellentSecond position at Mechatronics Engineering Department

- University Achievement ExamThird position in Mechatronics Engineering on all Jordanian Universities.

TrainingCourses:- Primavera training course-basics, total of 30 hours. January 2012.- Training course at General Electric power controllers plant Poland, since 2/7/2007 to

17/8/2007 at QC department.

- PLC programming and interface, Technology Club, University of Jordan, Was held for atotal of 30 hours from 12/ Jun /2006 to 22/ Jun /2006.

Professional Skills:

- Languages skills:Arabic (native language).

English (Advance speaking and writing)

- Computer skills:Excellent computer skills (Microsoft office applications, Adobe Acrobat professional, and

internet).

Very good skills in PLC programming

- Personal skills:- Easy understanding, ability to quickly gain the knowledge in any field, requires the minimal

guidance at any new field, logically thinking.

- Able to work under stress, responsible work with definite deadline and working with other asteamwork (good communication)

References:

Available upon request