AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)

CLEANING RECOMMENDATIONS

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and setouts listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.Tech Page Version 1

To see the complete AMERICAN STANDARD range go to www.reece.com.au/bathrooms

Inlet Valve Recommended maximum working pressure 500kpa

Seat Soft Close Quick Release Seat

Rim Configuration Box Rim

Bowl Configuration

Cistern Fixing Bolted directly to pan

Pan Fixing Screwed to the floor using brackets (supplied)and bedded with sealant

SPECIFICATIONSRecommended use Domestic, Hotel & Commercial

Dimensions are nominal measurements only.

Material Pan: Vitreous China Cistern: Vitreous ChinaSeat: Polypropylene

Colour Pan: WhiteCistern: WhiteSeat: White

Weight Pan: 34 kgCistern: 13 kg

Water Inlet Position Back Inlet

Note: Ensureback inletconnectionextends 40mmfrom �nishedwall.

40mm

page 1 of 4

P trap (converts to S Trap using plastic s bendprovided)

190

270

TM

WMKA21023AS 1172

835

140-270

400

680

353

Back inlet hole 415

700

125

381

760

240

We recommend the use of soapy water or approved cleaners.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.

The more stars the more water efficient

WATER RATINGwww.waterrating.gov.au

In accordance with AS/NZS 6400

Licence No. 0050LIXIL (Thailand) Public Company Limited

4.5 L per full flush / 3 L per half flush

3.5 litres average flush

INSTALLATION INSTRUCTIONS

page 2 of 4

Ø10

Ø5

Ø10

Ø22

Unit: mm

700/760

40125

140~159

160~270

140~270

70

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)140-150 mm.151-159 mm.

10 mm.20 mm.

160-170 mm.171-180 mm.181-190 mm.191-200 mm.201-210 mm.

30 mm.40 mm.50 mm.60 mm.70 mm.

211-220 mm. 80 mm.221-230 mm.

~ ~

261-270 mm.

90 mm.

130 mm.

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)

C=116 - (A-160)

190

B

A

190

BC

A

5a 5b

6a

6b

AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)

INSTALLATION INSTRUCTIONS

PUSH BUTTON ASSEMBLY AND ADJUSTMENT

page 3 of 4

9 10

1211

13 14

Ø22

190

AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)

12

Loosen lock nutTighten lock nut

Adjustment

Lock out

Full flush

Half flush

Ensure button rods are aligned with full & 1/2 flush on outlet valve.

SPARE PARTS

1

3

2

6

45

7

8

9

a

b

FLUSH BUTTON KIT1 - 9504479

2 - 103510 MINI STOP CHROME 15MM

BUFFER KITa - 9505886

b - 9505887 SEAT HINGE KITINCLUDES - FIXING KIT & SOFT CLOSE REPLACMENT KIT

FLEX HOSE WATER (PVC) 1/2"ELB 300MMDUAL FLUSH OUTLET VALVE COMPLETE

4 - 1817018

3 - 107616

5 - 9500475 SIDE/BACK INLET VALVE

TOP FIX CISTERN BOLTS (PAIR)6 - 9504528

7 - 9506467 CC CISTERN TO PAN RUBBER SEALPAN BEND8 - 9503902

9 - 9500851 PAN FIXING BRKT &COVER

AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)