cypress traveotm ii cyt2b6/2b7/2b9/2bl series …

2
CYPRESS TRAVEO TM II CYT2B6/2B7/2B9/2BL SERIES MICROCONTROLLERS For Automotive Body Control Cypress' Traveo II CYT2B6/2B7/2B9/2BL series MCUs integrate embedded CXPI interface and the CAN FD interface for automotive body applications that enable fast communication and quicker response time. The Traveo II family of microcontrollers have a whole range of options for you to choose from. www.cypress.com/traveoII Traveo TM II MCU Family CYT2B6/2B7/2B9/2BL Series PERFORMANCE Traveo II CYT2B6/2B7/2B8/2BL series is designed to enable faster in-car communication. This series provides higher response and faster communication with embedded CXPI interface and the CAN FD interface. 160 MHz Arm® Cortex® -M4F Single and up to 4 MB code flash Up to 8-ch CAN FD, 4-ch CXPI SECURITY FEATURES Today’s automobiles integrate multiple electronic control units that are connected through multiple networks. Traveo II CYT2B6/2B7/2B9/2BL series offers advanced security features with the introduction of HSM (Hardware security module) and dedicated Cortex® -M0+ for secure processing. With the embedded flash in dual bank mode, this family of microcontrollers enables advanced features such as updating firmware over the air. Crypto accelerator: - Embedded eSHE 1 and HSM 2 - Hardware-accelerated cryptography engine One Time Programmable Fuses (OTP) to manage product lifecycle Secure boot: - Arm® Cortex®-M0+ boots from ROM - ROM provides root-of-trust - Authentication/integrity check of the flash image Memory/peripheral protection: - Memory protection unit (MPU) and shared memory protection unit (SMPU) - Peripheral protection unit (PPU) JTAG security ENHANCED POWER MODES Traveo II CYT2B6/2B7/2B9/2BL series supports six power modes: Active, Sleep, Low-Power Active, Low-Power Sleep, DeepSleep, and Hibernate (typ. 5 uA). The series also supports cyclic wake-up from DeepSleep to optimize power consumption. AUTOSAR MCAL 3 EMBEDDED PLATFORM Traveo II CYT2B6/2B7/2B9/2BL series supports relevant versions of AUTOSAR MCAL, including optional microcontroller modules such as CorTst 4 , FlsTst 5 , RamTst 6 , FEE 7 , and HSM Performance Library. APPLICATIONS Traveo II CYT2B6/2B7/2B9/2BL series is the ideal solution for body control modules, HVAC, and lighting with up to 4 MB flash. 1 Enhanced Secure Hardware Extension 2 Hardware Security Module 3 Automotive Open System Architecture Microcontroller Abstraction Layer 4 Core Test 5 Flash Test 6 RAM Test 7 Flash EEPROM Emulation FEATURES Traveo II CYT2B6/2B7/2B9/2BL series offers cutting-edge performance and robust safety features for automotive body applications that need fast communication and quicker response time. 32-bit MCU Core Systems: 160 MHz Arm® Cortex®-M4F Single Up to 4 MB code flash, 128 KB work flash and 512 KB SRAM and Arm® Cortex®-M0+ Power Supply Voltage: 2.7 V to 5.5 V Connectivity: Up to 8-ch CAN FD, 4-ch CXPI (CYT2B9/2BL only), 8-ch Serial Communication Block (SCB), 12-chLIN/UART A/D Converter: Up to 64-ch, 12 bit with 3x successive approximation ADC (SAR ADC) units Timers: Up to 75-ch 16 bit and 8-ch 32 bit Timer Counter Pulse Width Modulator (TCPWM) Real Time Clock (RTC) Event generation timer GPIOs: Up to 152 programmable GPIOs Security: Embedded eSHE and HSM (on/off option) * Packages: 176/144/100/80/64 LQFP Temperature Range: -40 o C to 105 o C (S grade) -40 o C to 125 o C (E grade) * Firmware solution is a combination of Cypress' security low level drivers and third-party firmware.

Upload: others

Post on 04-Feb-2022

22 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CYPRESS TRAVEOTM II CYT2B6/2B7/2B9/2BL SERIES …

CYPRESSTRAVEOTM IICYT2B6/2B7/2B9/2BL SERIESMICROCONTROLLERSFor Automotive Body ControlCypress' Traveo II CYT2B6/2B7/2B9/2BL series MCUs integrate embedded CXPI interface and the CAN FD interface for automotive body applications that enable fast communication and quicker response time.

The Traveo II family of microcontrollers have a whole range of options for you to choose from.

www.cypress.com/traveoII

TraveoTM II MCU Family CYT2B6/2B7/2B9/2BL Series

PERFORMANCETraveo II CYT2B6/2B7/2B8/2BL series is designed to enable faster in-car communication. This series provides higher response and faster communication with embedded CXPI interface and the CAN FD interface.

•160 MHz Arm® Cortex®-M4F Single and up to 4 MB code �ash

•Up to 8-ch CAN FD, 4-ch CXPI

SECURITY FEATURESToday’s automobiles integrate multiple electronic control units that are connected through multiple networks. Traveo II CYT2B6/2B7/2B9/2BL series offers advanced security features with the introduction of HSM (Hardware security module) and dedicated Cortex®-M0+ for secure processing. With the embedded �ash in dual bank mode, this family of microcontrollers enables advanced features such as updating �rmware over the air.

•Crypto accelerator:

- Embedded eSHE1 and HSM2

- Hardware-accelerated cryptography engine

•One Time Programmable Fuses (OTP) to manage product lifecycle

•Secure boot:

- Arm® Cortex®-M0+ boots from ROM

- ROM provides root-of-trust

- Authentication/integrity check of the �ash image

•Memory/peripheral protection:

- Memory protection unit (MPU) and shared memory protection unit (SMPU) - Peripheral protection unit (PPU)•JTAG security

ENHANCED POWER MODESTraveo II CYT2B6/2B7/2B9/2BL series supports six power modes: Active, Sleep, Low-Power Active, Low-Power Sleep, DeepSleep, and Hibernate (typ. 5 uA). The series also supports cyclic wake-up from DeepSleep to optimize power consumption.

AUTOSAR MCAL3 EMBEDDED PLATFORMTraveo II CYT2B6/2B7/2B9/2BL series supports relevant versions of

AUTOSAR MCAL, including optional microcontroller modules such as

CorTst4, FlsTst5, RamTst6, FEE7, and HSM Performance Library.

APPLICATIONSTraveo II CYT2B6/2B7/2B9/2BL series is the ideal solution for body

control modules, HVAC, and lighting with up to 4 MB �ash.

1 Enhanced Secure Hardware Extension2 Hardware Security Module3 Automotive Open System Architecture Microcontroller Abstraction Layer 4 Core Test5 Flash Test 6 RAM Test7 Flash EEPROM Emulation

FEATURESTraveo II CYT2B6/2B7/2B9/2BL series offers cutting-edge performance and robust safety features for automotive body applications that need fast communication and quicker response time.

32-bit MCU Core Systems:• 160 MHz Arm® Cortex®-M4F Single

• Up to 4 MB code �ash, 128 KB work �ash and 512 KB SRAM and Arm® Cortex®-M0+

Power Supply Voltage:• 2.7 V to 5.5 V

Connectivity:• Up to 8-ch CAN FD, 4-ch CXPI (CYT2B9/2BL only), 8-ch Serial Communication Block (SCB), 12-chLIN/UART

A/D Converter:• Up to 64-ch, 12 bit with 3x successive approximation ADC (SAR ADC) units

Timers:• Up to 75-ch 16 bit and 8-ch 32 bit Timer Counter Pulse Width Modulator (TCPWM)

• Real Time Clock (RTC)• Event generation timer

GPIOs:• Up to 152 programmable GPIOs

Security:• Embedded eSHE and HSM (on/off option)*

Packages:

• 176/144/100/80/64 LQFP

Temperature Range:

• -40oC to 105oC (S grade)

• -40oC to 125oC (E grade)

*Firmware solution is a combination of Cypress' security low level drivers and third-party �rmware.

Page 2: CYPRESS TRAVEOTM II CYT2B6/2B7/2B9/2BL SERIES …

CYT2B6/2B7/2B9/2BL SERIES BLOCK DIAGRAM DEVELOPMENT TOOLS

CYT2B6/2B7/2B9/2BL SERIES PRODUCT LINEUP

Cypress Semiconductor Corporation

198 Champion Court, San Jose CA 95134

phone +1 408.943.2600 fax +1 408.943.6848

toll free +1 800.858.1810 (U.S. only) Press “1” to reach your local sales representative

© 2020 Cypress Semiconductor Corporation. All rights reserved. All other trademarks are the property of their respective owners. 002-29004 Rev.*A

GET STARTED NOWTo understand how you can transform your Automotive Design Experience, contact your Cypress Sales Representative or write to us at [email protected]

CYT2B63CACYT2B64CACYT2B65CACYT2B73CACYT2B74CACYT2B75CACYT2B77CACYT2B78CACYT2B93CACYT2B94CACYT2B95CACYT2B97CA

CYT2B98CACYT2BL3CACYT2BL4CA

CYT2BL5CACYT2BL7CACYT2BL8CA

22283222283248642734

39546427

34

395464

3445666657

8885

7

888

2

3

4

4

4

2

3

44

4

6667888878

88

8788

88

eSHE&HSM

eSHE&HSM

eSHE&HSM

eSHE&HSM

LQFP-64LQFP-80

LQFP-100LQFP-64LQFP-80

LQFP-100LQFP-144LQFP-176LQFP-64LQFP-80

LQFP-100

LQFP-144

LQFP-176

LQFP-64

LQFP-80

LQFP-100

LQFP-144

LQFP-176

1088 + 962.7 to 5.5160 128

512 + 642.7 to 5.580 64

-

4160 + 1282.7 to 5.5160 512

2112 + 1282.7 to 5.5160 256

Product Name CPU Freq.(MHz)

Power Supply(V)

Flash(Code + Work)

SRAM (KB)

12 bit ADC (ch)(3x unit (SAR)

CAN FD (ch) CXPI (ch) SCB

(ch) Security Package

Debugging Device Evaluation Board

Green Hills Software (MULTI®)

IAR Systems (IAR EmbeddedWorkbench)

IAR Systems (I-jet)

Green Hills Software (Green Hills ProbeTM)

TVII-B-E Base Board

TVII-B-E 64-pin CPU Board

TVII-B-E 144-pin CPU Board

TVII-B-E 176-pin CPI Board

PeripheralSystem Control Core Block

CYT2B6/2B7/2B9/2BL series

Peripheral

System Control Core Block

Regulators

PLL/FLL

RC Oscillators

LVD/BOD

Power ModeManagement

Real Time Clock

WDT/CSV

Reset

Event Generation Timer

GPIO Smart I/O

16-bit TCPWM

32-bit TCPWM

16-bit Motor TCPWM

Boot ROM

Code Flash SWD/JTAG/ Trace

PPU

Work Flash

SRAM

DMA OTPMPU

Cortex® M4F (Single) FPU Crypto

Cortex® M0+

IRQ/NMI

Arm®

Arm®

SCB I2C/UART/SPI

CAN FDCXPI Controller (CYT2B9/2BL only)

LIN/UART

12-bit ADC (3 x SAR ADC)