d link dwl 700ap
TRANSCRIPT
-
8/9/2019 d Link Dwl 700ap
1/81
This product can be set up usingany current web browser, i.e.,Internet Explorer 6 or NetscapeNavigator 6.2.3.
DWL-700APD-Link AirTM
Wireless Access Point
5V 2A DC Power Adapter
Before You Begin
Check Your Package Contents
DWL-700AP Wireless Access Point
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP) Cable
If any of the above items are missing, please contact your reseller.
Using a power supplywith a different voltage
rating will damage and voidthe warranty of this product.
Its best to use a computer (with an Ethernet adapter) that is connected to a switch forconfiguring the DWL-700AP. The default IP address for the DWL-700AP is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign yourcomputer a Static IP address within the same range as the DWL-700APs IP addressfor the purpose of configuring the DWL-700AP. See the Manual on the CD-ROM if youneed assistance in assigning a Static IP address for your network adapter.
2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-700AP.06062003
-
8/9/2019 d Link Dwl 700ap
2/82
Connecting The DWL-700AP Wireless Ac-cess Point To Your Network
A. First, connect the power adapter to the receptor at the back panel of theDWL-700AP and then plug the other end of the power adapter to a wall outletor power strip. The Power LED will turn ON to indicate proper operation.
B. Using a Ethernet cable, insert one end of the cable to the LAN port on theback panel of the DWL-700AP and the other end of the cable to a switch.Note: You also have the option of connecting the DWL-700AP directly to thecomputer that will be used for configuration. The Link LED light will illuminateto indicate a proper Ethernet connection.
C. Computers with 802.11b wireless adapters such as the DWL-650 AirWireless Cardbus Adapter and the DWL-520 AirWireless PCI Adapter can
connect to the DWL-700AP. By default, the DWL-700AP SSID is set todefault with a Channel setting of 6.
C.AntennaUsed to wirelesslyconnect to 802.11b
networks.
B.LAN PortThis is the connection forEthernet cables to yourEthernet-enabled device.
A. Receptor forPower Adapter
Reset Button
-
8/9/2019 d Link Dwl 700ap
3/83
Using The Setup Wizard
Open your Web
browser and typehttp://192.168.0.50into the URL addressbox. Then press theEnter or Return key.
The logon pop-up
screen will appear.
Typeadmin for theusername and leave thepassword field blank.
ClickOK
http://192.168.0.50
admin
Once you havelogged in, the Homescreen will appear.
ClickRun Wizard
-
8/9/2019 d Link Dwl 700ap
4/84
ClickNext
Step 1 - Set up your newpassword. You have theoption to establish a
password.
Step 2 -Set Wireless LANConnectionBy default the DWL-700APSSID is set to default witha Channel setting of 6.
ClickNext
Using The Setup Wizard (continued)
You will see the
following screens.
ClickNext
-
8/9/2019 d Link Dwl 700ap
5/85
Step 3 -EncryptionThe DWL-700AP is capableof two levels of wirelessencryption - 64-bit, and 128-bit. By default encryptionis disabled. You canchange the encryption
settings for more securewireless communication.
ClickNext
ClickRestart
Using The Setup Wizard (continued)
-
8/9/2019 d Link Dwl 700ap
6/86
Your Setup is Complete!
ClickClose
You will be returned to the Home tab. Please close all internet browserwindows.
When you have completed thesteps in this Quick InstallationGuide, your connected networkshould look similar to this:
-
8/9/2019 d Link Dwl 700ap
7/87
Connecting to the DWL-700AP
Using the AirWirelessUtillity included with the Air
Adapters, you can browseand connect to the DWL-
700AP.
The Link Info page of theAirutility will show theconnection status between
the DWL-700AP and Airwireless adapter.
The MAC address of theDWL-700AP is listed on
the product sticker on thebottom of the unit.
-
8/9/2019 d Link Dwl 700ap
8/88
Technical SupportYou can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link technical support through ourwebsite, or by phone.
Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a week.
D-Link Technical Support over the Internet:http://support.dlink.comemail:[email protected]
Tech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet:http://support.dlink.caemail:[email protected]