d-sub abs backshells - jevons · 2019. 7. 5. · cdm jevons inc. 6 size part number 9 p09gb-90-sl...
TRANSCRIPT
-
CDM Jevons Inc. www.jevons.on.ca
1
TABLE OF CONTENTS
D-SUB DIE CAST BACKSHELLS ………………………………………………………………… 2
D-SUB METALIZED ABS BACKSHELLS ………………………………………………………… 3
D-SUB ABS BACKSHELLS ………………………………………………………………………… 4
D-SUB 90° EXIT STANDARD BACKSHELLS ……………………………………………………. 5
D-SUB 90° AND 180° EXIT SLIDE-LATCH BACKSHELLS …………………………………….. 5
D-SUB 90° EXIT SLIDE LOCK BACKSHELLS …………………………………………………... 6
D-SUB DIE CAST BACKSHELLS W. CAPTIVATED JACKSCREWS ………………………... 7
D-SUB ZINC DIE CAST 45° EXIT BACKSHELLS ………………………………………………. 8
D-SUB INSULATED 45° EXIT BACKSHELLS …………………………………………………… 9
D-SUB PLASTIC 45° EXIT BACKSHELLS ……………………………………………………….. 10
D-SUB PLASTIC SNAP TOGETHER BACKSHELLS …………………………………………… 11
D-SUB CONTACTS ………………………………………………………………………………….. 12
SMART SERIAL BACKSHELL AND CONNECTORS …………………………………………. 13
LFH ZINC DIE CAST BACKSHELLS …………………………………………………………….. 14
HFMC68 VHDCI CONNECTOR & BACKSHELL ……………………………………………….. 15
SCSI OCTAL EXIT CAST BACKSHELLS ……………………………………………………….. 16
342 SERIES V.35 EMI/RFI SHIELDING SYSTEM ………………………………………………. 17
342 SERIES EMI/RFI METALIZED ABS BACKSHELLS ………………………………………. 18
786 SERIES EMI/RFI BACKSHELLS ……………………………………………………………... 19
V.35 EMI/RFI PIN PROTECTORS …………………………………………………………………. 20
V.35 DUST COVERS ………………………………………………………………………………... 21
COMBIMATE STAMPED & FORMED CONTACTS ……………………………………………. 22
PIN CONTACT CHART …………………………………………………………………………….. 23
SOCKET CONTACT CHART ……………………………………………………………………… 24
(RM) REMOVABLE MACHINED CONTACTS …………………………………………………… 25
V.35 CM & RM HAND TOOLS …………………………………………………………………….. 26
V.35 HEADERS ………………………………………………………………………………………. 27
V.35 GENDER CHANGERS ………………………………………………………………………… 28
ADAPTORS …………………………………………………………………………………………... 29
-
CDM Jevons Inc. www.jevons.on.ca
2
in mm in mm in mm in mm in mm
9 JDC09B.01 0.620 15.7 1.225 31.1 1.610 40.9 0.396 10.1 .210 - .400 5.3 - 10.2
15 JDC15B.01 0.590 15.7 1.565 39.4 1.640 40.9 0.396 10.1 .210 - .400 5.3 - 10.2
25 JDC25B.01 0.590 15.7 2.098 53.3 1.790 44.7 0.510 13.0 .230 - .500 5.8 - 12.7
37 JDC37B.01 0.620 15.7 2.745 69.7 1.925 48.9 0.726 18.4 .350 - .725 8.9 - 18.4
50 JDC50B.01 0.740 18.8 2.65 67.3 1.925 48.9 0.726 18.4 .350 - .725 8.9 - 18.4
A B C D Cable Range
Size Part #
D-SUB DIE CAST BACKSHELLS
FEATURES
• highly effective EMI/RFI shield due to metal to metal cable
shielding termination
• hermaphroditic design optimizes assembly and eliminates
the need to differentiate between male and female cover
halves
• comes with TPR grommets which accommodate a wide
range of cable diameters
• available in two assembly types, tapped or traditional
through hole
• accommodates industry standard D-Sub connectors
• available with custom logo displayed on both sides of
assembled cover
MATERIAL SPECIFICATIONS
• cover - die cast zinc
• grommet - TPR (UL94V-0)
• fasteners - steel, with nickel or clear zinc finish
• plating - nickel over copper
JDC SERIES REFERENCE DIMENSIONS
-
CDM Jevons Inc. www.jevons.on.ca
3
D-SUB METALIZED ABS BACKSHELLS
FEATURES
• nickel/copper plated over EDM textured high impact ABS
optimizes EMI/RFI shielding effectiveness
• hermaphroditic design optimizes assembly and eliminates
the need to differentiate between male and
female cover halves
• comes with TPR grommets which accommodate a wide
range of cable diameters
• accommodates industry standard D-Sub connectors
• available with custom logo displayed on both sides of
assembled cover
MATERIAL SPECIFICATIONS
• cover - high impact ABS (UL94V-0)
• grommet - TPR (UL94V-0)
• fasteners - steel, with nickel or clear zinc finish
• plating - nickel over copper on EDM textured high impact ABS
JMP SERIES REFERENCE DIMENSIONS
-
CDM Jevons Inc. www.jevons.on.ca
4
D-SUB ABS BACKSHELLS
FEATURES
• high impact ABS optimizes structural integrity
• hermaphroditic design optimizes assembly and
eliminates the need to differentiate between
male and female cover halves
• comes with TPR grommets which accommodate a
wide range of cable diameters
• accommodates industry standard d-sub connectors
• available with custom logo displayed on both sides of
assembled cover
• custom colours available please consult factory
MATERIAL SPECIFICATIONS
• cover - high impact ABS (UL94V-0)
• grommet - TPR (UL94V-0)
• fasteners - steel, with nickel or clear zinc finish
JP SERIES REFERENCE DIMENSIONS
grsg;ghs
-
CDM Jevons Inc. www.jevons.on.ca
5
D-SUB 90° EXIT STANDARD BACKSHELLS D-SUB 90° AND 180° EXIT SLIDE-LATCH BACKSHELLS
90º EXIT WITH 4-40 THUMBSCREWS
90° EXIT AND 180° EXIT SLIDE-LATCH CONNECTOR COVERS
FEATURES
• Backshell – nickel plated zinc die cast
• TPR grommet included
• Without grommet, cable exit is 0.450"/11.43m
• With grommet installed,
cable exit is 0.210"/5.33mm – 0.320"/8.13mm
Dimensions are for reference only
-
CDM Jevons Inc. www.jevons.on.ca
6
Size Part Number
9 P09GB-90-SL
15 P15GB-90-SL
25 P25GB-90-SL
37 P37GB-90-SL
D-SUB 90° EXIT SLIDE LOCK BACKSHELLS
FEATURES
• Backshell – Polycarbonate (PC) UL94 V-0
• Available in sizes 9 through 37
• Temp. Range -55°C - 105°C
• Strain Relief set with 4 different sizes moulded from steel fibre reinforced Polycarbonate UL94 V-0
• Integrated Locking Screws with UNC 4-40 threads for slide lock or panel assembly
• Cable Diameter 0.118” - 0.512” (3.00mm – 13.00mm)
-
CDM Jevons Inc. www.jevons.on.ca
7
Size Part Number A B C D E F (with Grommet) F (without Grommet)
9 DC09CJE.01 31.00 25.85 27.00 46.00 16.00 ø5.0 - ø9.0 ø11.00
15 DC15CJE.01 40.00 33.32 27.00 45.00 15.50 ø5.0 - ø9.0 ø11.00
25 DC25CJE.01 53.00 47.04 27.00 45.00 15.60 ø6.0 - ø10.0 ø13.00
37 DC37CJE.01 71.30 63.50 27.00 33.00 15.60 ø6.0 - ø10.0 ø13.00
Dimensions in mm (for reference only)
D-SUB DIE CAST BACKSHELLS
FEATURES
• Durable Nickel Plated Zinc Alloy cover halves
• Full Metal Nickel plated steel captivated 4-40
jackscrews
• TPR Grommets included
• Accommodates industry standard D-sub
connectors
GROMMETS FOR 9 & 15 POSITION KITS GROMMETS FOR 25 & 37 POSITION KITS
-
CDM Jevons Inc. www.jevons.on.ca
8
D-SUB ZINC DIE CAST 45° EXIT BACKSHELLS
DC
Size Strain Relief Packaging Options
9 9 pin G grommets included B bulk packaged 45 45 degree exit
15 15pin E individually packaged
25 25pin
37 37pin
50 50pin
XX G X -45
FEATURES • Backshell – nickel plated zinc die cast
• Available in sizes 9 through 50
• Cable strain relief – steel fibre
reinforced polycarbonate UL94V-0
• Cable diameter 0.118" - 0.512"
(3.00mm - 13.00mm)
-
CDM Jevons Inc. www.jevons.on.ca
9
Size Part Number A B
9 DC09GE-45-INS 31 36.2
15 DC15GE-45-INS 39.5 40.2
25 DC25GE-45-INS 53.2 40.2
37 DC37GE-45-INS 69.7 40.2
Dimensions in mm for reference only
D-SUB INSULATED 45° EXIT BACKSHELLS
FEATURES
• Backshell – nickel plated zinc die cast
• Available in sizes 9 through 37 • Temp. Range -40°C - 120°C
• EMI/RFI Shielded Steel Fibre reinforced PC (UL94 V-0) Strain Relief • Integrated Insulation Plates ideal for applications with screw termination connectors • Cable Diameter 0.118” - 0.512” (3.00mm – 13.00mm)
A
-
CDM Jevons Inc. www.jevons.on.ca
10
Size Part Number A B
9 P09GB-45 31 36.2
15 P15GB-45 39.3 40.2
25 P25GB-45 53 40.2
37 P37GB-45 69.5 40.2
Dimensions in mm for reference only
D-SUB PLASTIC 45° EXIT BACKSHELLS
FEATURES
• Backshell – Polycarbonate (PC) UL94 V-0 • Available in sizes 9 through 37
• Temp. Range -40°C - 120°C
• Strain Relief set with 4 different sizes moulded from steel fibre reinforced Polycarbonate UL94 V-0
• Cable Diameter 0.157” - 0.512” (4.00mm – 13.00mm)
-
CDM Jevons Inc. www.jevons.on.ca
11
D-SUB PLASTIC SNAP TOGETHER BACKSHELLS
FEATURES
• Convenient one piece, snap together plastic
clamp style backshell
• Nickel plated black steel locking screws for
added strength
• Nickel plated black steel captivated
jackscrews with moulded head
• Inner cable clamp
• Accommodates industry standard d-sub
connectors
Dimensions in mm (for reference only)
Size Part Number A B C D E F G
9 P09CJE-12 33.80 24.99 12.00 33.30 24.60 14.80 8.50
15 P15CJE-12 42.20 33.32 16.00 32.80 23.60 14.80 10.50
25 P25CJE-12 56.30 47.04 16.00 36.50 25.60 14.80 11.00
37 P37CJE-12 72.70 63.50 16.00 39.20 26.40 15.00 11.00
50 P50CJE-12 70.10 61.11 16.00 41.20 26.40 18.50 12.00
-
CDM Jevons Inc. www.jevons.on.ca
12
D-SUB CONTACTS
-
CDM Jevons Inc. www.jevons.on.ca
13
Smart Serial Backshell and Connectors
Part Number Description
CDMNA00016 SSC Kit - Metal Backshell and Male Connector (part numbers SSC26000HP1 + SSC26MC100)
SSC26FRA00 Female Board Connector
The 26 pin Smart Serial connector with full metal backshell was designed to
meet the highest quality standards and shielding requirements.
SPECIFICATIONS
FULL METAL BACKSHELL
⇒ Material Zinc Diecast Ni-plated
⇒ Jackscrews Ni-plated, UNC 4-40
⇒ Hood screws with Phillips head
⇒ Spacer low carbon steel
(the spacer will secure the connector)
MALE CABLE CONNECTOR
⇒ Shell Steel Ni-plated
⇒ Short plates Phosphor Bronze
⇒ Contacts Phosphor Bronze
⇒ Body LCP (Liquid Crystal Polymer)
⇒ Cover LCP (Liquid Crystal Polymer)
FEMALE BOARD CONNECTOR
⇒ Shell Steel Ni-plated
⇒ Snap-In Phosphor Bronze
⇒ Hex screw Steel Ni-plated
⇒ Housing LCP (Liquid Crystal Polymer) glass-reinforced
⇒ Insulation Material PBT (PolyButylene Terephthalate)
⇒ Contacts Phosphor Bronze
⇒ Operating temp. -55 °C to 125 °C
ELECTRICAL / MECHANICAL VALUES
⇒ Current rating 0,5 A ⇒ Dielectric insulation voltage 500 VAC ⇒ Voltage rating 125 V ⇒ Insulation resistance 500 Mohm
⇒ Wire size 28 AWG ⇒ Cable diameter 6.0 mm – 6.7 mm ⇒ Mating force (26 position connector) 10-15 N
-
CDM Jevons Inc. www.jevons.on.ca
14
LFH ZINC DIE CAST BACKSHELLS
FEATURES
• designed to accommodate the Molex LFH series 160 and 200 pin connectors
• easy to assemble, tapped, zinc die cast tub and cover design optimizes shielding effectiveness
• unique cable braid captivation improves shield termination and enhances EMI/RFI attenuation
• multiple exits each with 0.250"/6.35mm ID. Custom cable exits are available, please consult factory
• custom logo option available
• supplied with 4-40 jackscrews, M3 available on request
-
CDM Jevons Inc. www.jevons.on.ca
15
HFMC 68 M MS A 1 9 7
No. Type
68 Pos.
Contact Type
M = Male
Hood Finish
MS = Metal Jackscrew (Straight Exit 180°)
Options
A = Assembly Type
Wire Holder
1 = 0.61mm
Entry Hole Size
9 = (ø9.0)
Contact Finishes
7 = 30μ" Gold Selective Plating
HFMC68 VHDCI CONNECTOR & BACKSHELL
FEATURES • kit containing backshell, connector and hardware as shown
• easy to assemble, tapped, zinc die cast tub and cover design optimizes shielding effectiveness
• available with 9mm cable exit, custom cable exit option available on request
• conforms to industry standards
• Material: PBT Glass Reinforced Fiber UL94V0
• Contact current rating: 1 Amp
• Dielectric withstanding voltage: 250VAC
• Insulation resistance: 500MΩ/Min
• Contact resistance: 35MΩ/Max
• Operating Temperature: -55°C ~ +85°c
• Contact Plating 30 μ inches
-
CDM Jevons Inc. www.jevons.on.ca
16
SCSI OCTAL EXIT CAST BACKSHELLS
FEATURES
• designed to accommodate Tyco and
equivalent SCSI 68 pin pin connectors
• easy to assemble, tapped, zinc die cast tub and cover design optimizes shielding effectiveness
• unique cable braid captivation improves shield termination and enhances EMI/RFI attenuation
• 8 cable exits each with 0.211"/5.36mm ID. Custom cable exits are available, please consult factory
• supplied with 4-40 jackscrews, 2-56 available on request
-
CDM Jevons Inc. www.jevons.on.ca
17
342 SERIES V.35 EMI/RFI SHIELDING SYSTEM
-
CDM Jevons Inc. www.jevons.on.ca
18
342 SERIES EMI/RFI METALIZED ABS BACKSHELLS
-
CDM Jevons Inc. www.jevons.on.ca
19
786 SERIES EMI/RFI BACKSHELLS
FEATURES
● ISO 2593 compliant
● Nickel Plated Extruded Aluminum
● Seamless design with symmetrical wall thickness improves structural ---integrity
● Superior EMI/RFI attenuation due to
improved strain relief design
● Accommodates industry standard --- ---
--- V.35 connectors
● Provided with one-piece metal ----------
-- jackscrews installed
● Large exit strain relief does not exceed
---profile of hood
Dimensions are for reference only
in mm
786.734-90 .250 - .500 6.35 - 12.7
786.934-90 .400 - .600 10.16 - 15.24
Cable OD RangePart Number
-
CDM Jevons Inc. www.jevons.on.ca
20
V.35 EMI/RFI PIN PROTECTORS
FEMALE SHELL
MALE SHELL
2.122”
SHALLOW SHELL
● DIMENSIONS ARE FOR REFRENCE ONLY ● OTHER OPTIONS AVAILABLE, CONSULT FACTORY
Part Number Description
783.634-90 Male Aluminum Nickel Finish
783.634-91 Male Nickel Plated ABS
784.734-90 Female Aluminum Nickel Finish
784.734-91 Female Nickel Plated ABS
V6313-1 Steel Shallow Shell Nickel Finish
-
CDM Jevons Inc. www.jevons.on.ca
21
V.35 DUST COVERS
● PE friction fit dust cover protects against debris and external forces which may degrade connector when in transit or not in use.
-
CDM Jevons Inc. www.jevons.on.ca
22
Combimate stamped & formed contacts
-
CDM Jevons Inc. www.jevons.on.ca
23
Combimate stamped & formed contacts
-
CDM Jevons Inc. www.jevons.on.ca
24
Combimate stamped & formed contacts
-
CDM Jevons Inc. www.jevons.on.ca
25
(RM) Removable machined contacts
For special applications, for example
harsh environments, C.D.M. offers a
high-quality removable machined (RM)
contact. It is a solid closed barrel
machined pin and socket contact.
Manufactured from a solid copper alloy,
the contact features high mechanical
stability and can carry a higher current
than the stamped and formed contact. The
six-finger gold-plated female contact
guarantees a low and stable resistance
over a great number of mating cycles at a
low insertion force.
The crimp barrel is designed for a high-
quality, 8-impression (MIL spec.)
crimp.
Contacts are available as female or male parts and for applications where
two different contacts – male and female – are needed in a mixed configuration.
For manual crimping a standard hand tool is available. For automated crimping,
C.D.M. can be contacted for advice.
Contact specification
Contact body: Copper alloy CuZn36Pb3
Contact spring: Beryllium copper alloy 172
Plating: 0.38 μm Au (15 μinch) over Ni or
0.75 μm Au (30 μinch) over Ni
Retention spring: Stainless steel
Performance characteristics
Mating force: 1.0 – 4.5 N (0.225 – 1.0 lb)
Mating cycles: Min. 1000 cycles
Push-out force: Min. 100 N (22.5 lb) from a Pocan® housing
Current rating: 13 A (for higher currents contact C.D.M.)
Initial resistance: Max. 4 mΩ, measured according to IEC 512-2
Initial voltage drop: Max. 35 mV at 13 A at 25°C ambient temp.
Operating temperature: -55°C to 125°C for gold-plated contacts
Subject to change without prior notice
-
CDM Jevons Inc. www.jevons.on.ca
26
V.35 CM & RM HAND TOOLS
● CM Hand Crimp Tool
Available in 2 ranges
● CM Insertion and Extraction Tools
● RM Hand Crimp Tool
● RM Insertion and Extraction Tools
Part Number AWG
769.116-00 26-24/24-20/18-16
769.116-01 30-28/26-24/24-20
Part Number Description
769.103-00 Extraction Tool
769.103-30 Insertion Tool
Part Number AWG
769.116-04 26-10
Part Number Description
000.900-00 Extraction Tool
000.900-01 Insertion Tool
-
CDM Jevons Inc. www.jevons.on.ca
27
V.35 Headers
For placement on printed circuit boards C.D.M. has several fully assembled, ready to place V.35 headers available. The
headers are pre-loaded, fully or customer specific, with size 16 or 10 machined contacts. The header can accommodate
male, female or a combination of male and female contacts in any desired configuration. Headers are standard equipped
with jack screws, mounting brackets for securing the header on the printed circuit board and a wafer to guarantee a fixed
solder post position. The standard jack screw has an UNC6-32 single thread; on request, a double threaded version is
available.
The mounting hardware bracket can either be a snap-in type or one with a screw hole.
For those applications where available board space is critical, a “low profile” header is also available. The depth of the header, the space occupied by the header on the board, is approximately half the depth of the standard header. The header is loaded with size 16 machined contacts, upon request headers loaded with 1.0 mm machined contacts are available.
Subject to change without prior notice
-
CDM Jevons Inc. www.jevons.on.ca
28
V.35 GENDER CHANGERS
Available fully assembled or as a kit containing two nickel plated steel cover halves, two connectors and all the necessary hardware. (Contacts sold separately)
Assembled adaptors are available fully or selectively loaded.
Each assembled adaptor undergoes a complete electrical test.
FULLY ASSEMBLED VERSION
KITTED VERSION
Part Number Description
34-FF Assembled V.35 Female to Female Adaptor
34-FFK Unassembled V.35 Female to Female Adaptor Kit
34-MM Assembled V.35 Male to Male Adaptor
34-MMK Unassembled V.35 Male to Male Adaptor Kit
-
CDM Jevons Inc. www.jevons.on.ca
29
ADAPTORS
Available Overmoulded and Ultrasonic Welded
Overmoulded Ultrasonic Welded
Sample shown: V.35 to DB25 Sample shown: V.35 to DB37
The adaptor can be completely shielded with copper foil which is connected to the D-sub shield and to the V.35
jackscrews (as shown)
Designed to meet: CCITT V.35
ISO 2593
MIL-C-28748
UL
CSA
Many options available. Please consult factory with requirement details for a quote.
-
CDM Jevons Inc.
72 Proctor Road, Schomberg, ON Canada L0G1T0 Phone: +1(905) 939-8001 Toll Free Phone: 1-800-267-4492
Fax: +1(905) 939-8002 Toll Free Fax: 1-877-267-4493
Product information, drawings and a PDF version of this catalogue are available at:
www.jevons.on.ca
CDM Jevons Catalog REV: 12168
http://www.jevons.on.ca/