Sheet 1 of 2

DETAIL 01

DETAIL 01DETAIL 05

DETAIL 03

DETAIL 04

DETAIL 02

DETAIL 03

DETAIL 06

KEY

DETAIL 02

DETAIL 03 DETAIL 04

Data Sheet N° 202Stainless steel and cable rail balustrade installation

On Solid Substructure

©© Copyright Greensquares Products Ltd 2013

Handrail End Cap

Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.

Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.

Turnbuckles and fixings are indicative and may vary from those illustrated.

End Post

Baseplate cover to slide over baseplate

Baseplate to to be fixed with 2 holes to inside of balustrading and 1 hole to outside.

Baseplate to sit on and fix through slabs.

Baseplate fixed to slab using 3N° stainless steel M8x110mm resin anchor studs (not supplied). Holes to be drilled 10mm diameter, 80mm deep.

Corner Post

Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.

Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.

Handrail corner connector.

Turnbuckles and fixings are indicative and may vary from those illustrated.Refer to seperate guidance for turnbuckle fixing.

Data Sheet N° 202

Sheet 2 of 2

DETAIL 05

DETAIL 01DETAIL 05

DETAIL 03

DETAIL 04

DETAIL 02

DETAIL 03

DETAIL 06

KEY

DETAIL 06

©© Copyright Greensquares Products Ltd 2013

Handrail

Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.

Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.

Cable to pass through pre drilled holes in centre posts.

Centre post

Cable to pass through pre drilled holes in centre posts.

Centre post

Baseplate cover to slide over baseplate

Stainless steel and cable rail balustrade installationOn Solid Substructure