data sheet - rs componentssurface multilayer capacitor soft termination npo and x7r fication – v.5...

Pro

duct

Speci

fica

tion –

May

23, 2019 V

.5

DATA SHEET

SURFACE-MOUNT CERAMIC

MULTILAYER CAPACITORS Soft termination

NPO and X7R 16V TO 3KV

0.47pF to 2.2 uF

RoHS compliant & Halogen Free

2

19

NPO & X7R Soft Termination

16V to 3KV

Surface-Mount Ceramic Multilayer Capacitors

Product specification

www.yageo.com

May. 23, 2019 V.5

SCOPE

This specification describes X7R

series chip capacitors with Flexible

leadfree terminations.

APPLICATIONS

High flexure stress circuit boards

Switch power supplies

Telecom base station

FEATURES

Supplied in tape on reel

Flexible termination system

Leaded-free termination meet

RoHS requirements

Improved resistance to thermal

stresses

Increased mechanical

performance

ORDERING INFORMATION - GLOBAL PART NUMBER

All part numbers are identified by the series, size, tolerance, TC material,

packing style, voltage, process code, termination and capacitance value.

YYAAGGEEOO oorrddeerriinngg ccooddee

GLOBAL PART NUMBER (PREFERRED)

CS XXXX X X X7R X BX XXX

(1) (2) (3) (4) (5) (6)

(1) SIZE – INCH BASED (METRIC)

0402 (1005)

0603 (1608)

0805 (2012)

1206 (3216)

1210 (3225)

1808 (4520)

1812 (4532)

(2) TOLERANCE

G = ± 2% (1)

J = ± 5% (2)

K = ± 10%

M = ± 20%

(3) PACKING STYLE

R = Paper/PE taping reel; Reel 7 inch

K = Blister taping reel; Reel 7 inch

P = Paper/PE taping reel; Reel 13 inch

F = Blister taping reel; Reel 13 inch

(4) RATED VOLTAGE

7 = 16 V

8 = 25 V

9 = 50 V

0 = 100 V

A = 200 V

Y = 250 V

B = 500 V

Z = 630 V

C = 1 kV

D = 2 kV

E = 3 kV

(5) PROCESS

N = NP0

B = Class 2 MLCC

(6) CAPACITANCE VALUE

2 significant digits+number of zeros

The 3rd digit signifies the multiplying factor, and letter R is decimal point

Example: 103 = 10 x 103 = 10,000 pF = 10 nF

NOTE

1. Tolerance ±2% doesn't available for full NPO product range, please contact local sales

force before order.

2. Tolerance ±5% doesn't available for full X7R product range, please contact local sales

force before order.

3

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

CONSTRUCTION

The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal

electrodes are contained. This structure gives rise to a high capacitance per unit volume.

The inner electrodes are connected to the two end flexible terminations and finally covered with a layer of

plated tin (NiSn).

The terminations are lead-free. A cross section of the structure is shown in Fig.1 and Fig.2.

Fig. 1 Surface mounted multilayer ceramic capacitor construction

TYPE L1 (mm) W (mm) T (mm) L2/L3(mm)

min L2/L3(mm)

max L4(mm)

min Dimension

code

0402 1.0 ± 0.15 0.5 ± 0.15 0.50 ± 0.15 0.10 0.35 0.30 CA

0603 1.6 ± 0.20 0.8 ± 0.15 0.80 ± 0.15 0.20 0.65 0.50 DA

1.6 ± 0.25 0.8 ± 0.25 0.80 ± 0.25 0.20 0.85 0.20 DB

0805 2.0 ± 0.3 1.25 ± 0.2

0.60 ± 0.15

0.25 0.75 0.70

EA

0.85 ± 0.15 EB

1.25 ± 0.20 EC

1.25 ± 0.25 1.25 ± 0.25 0.25 0.85 0.50 ED

1206 3.2 ± 0.4 1.6 ± 0.2

0.60 ± 0.15

0.25 0.85 1.50

FA

0.85 ± 0.15 FB

1.15 ± 0.20 FC

1.25 ± 0.20 FD

1.60 ± 0.20 FE

1.6 ± 0.3 1.60 ± 0.30 0.25 1.00 1.20 FF

1210 3.2 ± 0.5 2.5 ± 0.3

0.85 ± 0.20

0.25 0.85 1.40

GA

1.15 ± 0.30 GB

1.25+/-0.20 GC

1.25+/-0.30 GD

1.60+/-0.30 GE

2.00+/-0.30 GF

2.5 ± 0.3 0.25 1.0 1.2 GG

1808 4.5+0.6/-0.4 2.0+/-0.4

1.25+/-0.20

0.25 0.85 2.20

HA

1.35+/-0.40 HB

1.60+/-0.20 HC

1.60+/-0.40 HD

2.00+/-0.40 HE

1812 4.5+0.6/-0.4 3.2+/-0.4

0.85+/-0.30

0.25 0.85 2.20

IA

1.15+/-0.40 IB

1.25+/-0.20 IC

1.25+/-0.40 ID

1.35+/-0.40 IE

1.60+/-0.40 IF

DIMENSION

Table 1 For outlines see fig. 3

OOUUTTLLIINNEESS

For dimension see Table 1

Fig. 3 Surface

mounted multilayer ceramic capacitor dimension

YNM0049

Copper

Ni Plating

Sn Plating

Soft electrode(Stress relaxation)

Fig. 2 Concept of soft termination

4

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 2 NPO / 0402 to 0805

CAPACITANCE RANGE & THICKNESS

CAP. 0402 0603 0805

50V 100V 50V 100V 250V 50V 100V 250V 500V 630V 1000V

0.47 pF CA CA DA DA DA EA EA EA EA




1 pF CA CA DA DA DA EA EA EA EA












10 pF CA CA DA DA DA EA EA EA EA EA EB









56 pF CA CA DA DA DA EA EA EA EA EA EC



100 pF CA CA DA DA DA EA EA EA EA EA

Tape width 8 mm

NOTE

1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request 3. For product with 2% tolerance, please contact local sales force before ordering

5

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 3 NPO / 0402 to 0805


CAP. 0402 0603 0805

50V 100V 50V 100V 250V 50V 100V 250V 500V 630V 1000V



180 pF CA

DA DA DA EA EA EA EA EA

220 pF CA

DA DA DA EA EA EB EB EB

270 pF CA


330 pF CA


390 pF CA


470 pF CA


560 pF

DA DA DA EA EA EB EC EC

680 pF

DA DA DA EA EA EB EC EC

820 pF

DA DA

EA EA EB EC EC

1.0 nF

DA DA

EA EA EB EC EC

1.2 nF

DA

EB EB EC

1.5 nF

DA

EB EB EC

1.8 nF

DA

EB EB EC

2.2 nF

DA

EC EC EC

2.7 nF

DA

EC EC EC

3.3 nF

DA

EC EC EC

3.9 nF

EC EC EC

4.7 nF

EC EC EC

5.6 nF

EC EC

6.8 nF

EC EC

8.2 nF

EC EC

10 nF

EC EC

Tape width 8 mm

NOTE 1. Values in shaded cells indicate thickness class in mm

2. Capacitance value of non E-12 series is on request 3. For product with 2% tolerance, please contact local sales force before ordering

6

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 4 NPO / 1206 to 1210


CAP. 1206 1210

50V 100V 250V 500V 630V 1000V 2000V 3000V 50V 100V 250V 500V 630V 1000V 2000V

0.47 pF FA FA FA

0.56 pF FA FA FA

0.68 pF FA FA FA

0.82 pF FA FA FA

1 pF FA FA FA

1.2 pF FA FA FA

1.5 pF FA FA FA

1.8 pF FA FA FA

2.2 pF FA FA FA FA

2.7 pF FA FA FA FA

3.3 pF FA FA FA FA

3.9 pF FA FA FA FA

4.7 pF FA FA FA FA

5.6 pF FA FA FA FA

6.8 pF FA FA FA FA

8.2 pF FA FA FA FA

10 pF FA FA FA FA FD FD FD FD







GC GC GC


GC GC GC

47 pF FA FA FA FA FD FD FD FD GC GC GC GC GC GC GC

56 pF FA FA FA FA FD FD FD GC GC GC GC GC GC GC




Tape width

7

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 5 NPO / 1206 to 1210


CAP. 1206 1210

50V 100V 250V 500V 630V 1000V 2000V 50V 100V 250V 500V 630V 1000V 2000V





270 pF FA FA FA FA FD FD

GC GC GC GC GC GC


GC GC GC GC GC GC


GC GC GC GC GC GC


GC GC GC GC GC GC


GC GC GC GC GC GC


GC GC GC GC GC GC

820 pF FA FA FB FB FD FD

GC GC GC GC GC GC

1.0 nF FA FA FB FB FD FD

GC GC GC GC GC GC

1.2 nF FA FA FB FB FD

GC GC GC GC

1.5 nF FA FA FB FB FD

GC GC GC GC

1.8 nF FA FA FD FD FD

GC GC GC GC

2.2 nF FA FA FD FD FD

GC GC GC GC

2.7 nF FA FA FD

GC GC GC GC

3.3 nF FB FB FD

GC GC GC GC

3.9 nF FB FB FD

GC GC GC GC

4.7 nF FB FB

GC GC GC GC

5.6 nF FB FB

GC GC

6.8 nF FB FB

GC GC

8.2 nF FD FD

GC GC

10 nF FD FD

GC GC

Tape width 8 mm

8

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 6 NPO / 1808 to 1812


CAP. 1808 1812

1000V 2000V 3000V 100V 250V 500V 630V 1000V 2000V 3000V

10 pF

HC

IC IC IC

12 pF

HC

IC IC IC

15 pF

HC

IC IC IC

18 pF

HC

IC IC IC

22 pF

HC

IC IC IC

27 pF

HC

IC IC IC

33 pF HA HA HC

IC IC IC

39 pF HA HA HC

IC IC IC

47 pF HA HA HC

IC IC IC

56 pF HA HA HC IC IC IC IC IC IC IC




120 pF HA HA

IC IC IC IC IC IC IC

150 pF HA HA


180 pF HA HA


220 pF HA HA


270 pF HA HA

IC IC IC IC IC IC

330 pF HA HA

IC IC IC IC IC IC

390 pF HA HA

IC IC IC IC IC IC

470 pF HA HA

IC IC IC IC IC

560 pF HA HA

IC IC IC IC IC

680 pF

IC IC IC IC IC

820 pF

IC IC IC IC IC

1.0 nF

IC IC IC IC IC

1.2 nF

IC IC IC IC IC

1.5 nF

IC IC IC IC IC

1.8 nF

IC IC IC

2.2 nF

IC IC IC

2.7 nF

IC IC IC

3.3 nF

IC IC IC

3.9 nF

IC IC IC

4.7 nF

IC IC IC

5.6 nF

IC

6.8 nF

IC

8.2 nF

IC

10 nF

IC

12 nF

IC

15 nF

IC

18 nF

IC

22 nF

IC

27 nF

33 nF

Tape Width 12 mm

NOTE

1. Values in shaded cells indicate thickness class in mm

2. Capacitance value of non E-12 series is on request

3. For product with 2% tolerance, please contact local sales force before ordering

9

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 7 X7R / 0402 to 0805


CAP. 0402

0603

0805

16V 25V 50V 100V 16V 25V 50V 100V 250V 16V 25V 50V 100V 250V 500V 630V 1000V

100 pF CA CA CA CA DA DA DA DA DA

150 pF CA CA CA CA DA DA DA DA DA EA EA EA EA EB EB EB EB





1.0 nF CA CA CA CA DA DA DA DA DA EA EA EA EA EB EB EB EB

1.5 nF CA CA CA CA DA DA DA DA DA EA EA EA EA EB EB EB

2.2 nF CA CA CA CA DA DA DA DA DA EA EA EA EA EB EB EB

3.3 nF CA CA CA CA DA DA DA DA

EA EA EA EA EB EB EB


EA EA EA EA EB EB EB


EA EA EA EA EC EB EB

10 nF CA CA CA CA DA DA DA DA

EA EA EA EA EC EC EC

15 nF CA CA CA DA DA DA DA

EA EA EA EB EC EC


EA EA EA EB EC EC


EB EB EB EC


EB EB EB EC

68 nF CA CA

DA DA DA DA

EB EB EB EC

100 nF CA CA

DA DA DA DA

EB EB EB EC

150 nF

DA DA DA

EC EC EC

220 nF

DA DA DA

EC EC EC

330 nF

DA DA

EC EC EC

470 nF

DA DA

EC EC EC

680 nF

DA

EC EC EC

1000 nF

DA

EC EC EC

2.2 µF

EC ED

4.7 µF

ED

Tape width 8 mm

NOTE




10

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

CAP. 1206 1210

16V 25V 50V 100V 200/250V 500V 630V 1000V 2000V 16V 25V 50V 100V 250V 500V 630V 1000V 2000V

100 pF

150 pF

220 pF FB FB FB FB FB FD FD FD FD



GD GD


GD GD

1.0 nF FB FB FB FB FB FD FD FD FD

GD GD

1.5 nF FB FB FB FB FB FD FD FD FD

GD GD

2.2 nF FB FB FB FB FB FD FD FD

GA GA GA GA GA GD GE


GA GA GA GA GA GD GD GD





10 nF FB FB FB FB FB FD FD FD


15 nF FB FB FB FB FB FD FD


22 nF FB FB FB FB FD FD FE

GA GA GA GA GD GD GE GE

33 nF FB FB FB FB FD FE FE

GA GA GA GA GD GD

47 nF FB FB FB FB FD

GA GA GA GA GD GD

68 nF FB FB FB FD FD

GA GA GA GA GD

100 nF FB FB FB FD FE

GA GA GA GA GD

150 nF FB FB FC FD

GA GA GB GD GD

220 nF FB FB FC FD

GA GA GB GD GD

330 nF FE FE FE FF

GA GA GB GD

470 nF FE FE FE FF

GB GB GD GD

680 nF FC FC FF FF

GB GB GD GF

1000 nF FC FC FF FF

GD GD GD GF

2.2 µF FC FC FF FF

GG GG GG GF

4.7 µF FF FF

GG GG GG

10 µF FF FF

GG GG GG

Tape width 8 mm

NOTE




Table 8 X7R / 1206 to 1210


11

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

CAP. 1808 1812

1000V 2000V 3000V 50V 100V 250V 500V 630V 1000V 2000V

100 pF

150 pF

220 pF

330 pF HB HB HD

470 pF HB HB HD

680 pF HB HB HD

1.0 nF HB HB HE

1.5 nF HB HB HE

2.2 nF HB HD IA IA IA ID IE IE IE

3.3 nF HB IA IA IA ID IE IE IE

4.7 nF HB IA IA IA ID IE IE IE

6.8 nF HD IA IA IA ID IE IE

10 nF HD IA IA IA ID IE IE

15 nF IA IA IA ID IE IE

22 nF IA IA IA ID IE IE

33 nF IA IA IA ID IF IF

47 nF IA IA ID ID

68 nF IA IA ID ID

100 nF IB ID ID IF

150 nF IB ID ID

220 nF IB ID IF

330 nF IB ID IF

470 nF IB IF IF

680 nF IF IF

1000 nF IF IF

2.2 µF

Tape width 12 mm

NOTE




Table 9 X7R / 1808 to 1812


12

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

Table 10

THICKNESS CLASSES AND PACKING QUANTITY

SIZE CODE

THICKNESS CLASSIFICATION

TAPE WIDTH QUANTITY PER REEL

Ø 180 MM / 7 INCH Ø 180 MM / 13 INCH

PAPER BLISTER PAPER BLISTER

0402 0.50+/-0.15 8mm 10,000 -- 50,000 --

0603 0.80+/-0.15 8mm 4,000 -- 15,000 --

0805

0.60+/-0.15 8mm 4,000 -- 20,000 --

0.85+/-0.15 8mm 4,000 -- 15,000 --

1.25+/-0.20 8mm -- 3,000 -- 10,000

1206

0.60+/-0.15 8mm 4,000 -- 20,000 --

0.85+/-0.15 8mm 4,000 -- 15,000 --

1.15+/-0.20 8mm -- 3,000 -- 10,000

1.25+/-0.20 8mm -- 3,000 -- 10,000

1.60+/-0.20 8mm -- 2,000 -- 8,000

1.60+/-0.30 8mm -- 2,000 -- 8,000

1210

0.85+/-0.20 8mm -- 4,000 -- 10,000

1.15+/-0.30 8mm -- 3,000 -- 10,000

1.25+/-0.20 8mm -- 3,000 -- 10,000

1.25+/-0.30 8mm -- 3,000 -- 10,000

1.60+/-0.30 8mm -- 2,000 -- 5,000

2.00+/-0.30 8mm -- 2,000 -- --

1808

1.25+/-0.20 12mm -- 2,000 -- --

1.35+/-0.40 12mm -- 2,000 -- --

1.60+/-0.20 12mm -- 2,000 -- --

1.60+/-0.40 12mm -- 2,000 -- --

2.00+/-0.40 12mm -- 2,000 -- --

1812

0.85+/-0.30 12mm -- 2,000 -- --

1.15+/-0.40 12mm -- 1,000 -- --

1.25+/-0.20 12mm -- 1,000 -- --

1.25+/-0.40 12mm -- 1,000 -- --

1.35+/-0.40 12mm -- 1,000 -- --

1.60+/-0.40 12mm -- 1,000 -- --

ELECTRICAL CHARACTERISTICS

XX77RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS

Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions

for testing as given in 5.3 of IEC 60068-1:

- Temperature: 15 °C to 35 °C

- Relative humidity: 25% to 75%

- Air pressure: 86 kPa to 106 kPa

Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time

sufficient to allow the entire capacitor to reach this temperature.

The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.

13

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

DESCRIPTION VALUE

Capacitance range 100 pF to 2.2µF

Dissipation factor (D.F.)

NPO

C < 30 pF

≤ 1 / (400 + 20C )

C ≥ 30 pF

≤ 0.1 %

X7R

16V

0402 0603 0805 1206 1210 1808 1812

100pF to 22nF 100pF to 220nF 150pF to 470nF 220pF to 1µF 2.2nF to 1µF

≤ 3.5%

27nF to 100nF 470nF to 1µF 680 nF to 2.2µF 2.2µF

≤ 5%

4.7µF 4.7µF to 10µF 2.2µF to 10µF

≤ 10%

25V

100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 680nF 2.2nF to 1µF

≤ 2.5%

12 nF to 47nF 47nF to 220nF 220nF to 470nF 1µF

≤ 3.5%

56nF to 100nF

680nF to 1µF 2.2µF

≤ 5%

330nF to 470nF 2.2µF 4.7µF to 10µF 2.2µF to 10µF

≤ 10%

50V

100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 470nF 2.2nF to 1µF

2.2nF to 1µF ≤ 2.5%

12 nF to 47nF 47nF to 220nF 220nF to 470nF 680nF to 1µF

≤ 3.5%

680nF 2.2µF

≤ 5%

1µF

2.2µF to 10µF

≤ 10%

100V

All 100pF to 10nF All 220pF to 680nF 2.2nF to 680nF

All ≤ 2.5%

1µF 1µF

≤ 3.5%

12nF to 100nF

2.2µF 2.2µF

≤ 5%

250V to 3KV All All All All All All ≤ 2.5%

Insulation resistance after 1 minute at Ur (DC)

I.R. ≥ 10 GΩ or R × C ≥ 500 seconds whichever is less

R × C ≥ 100 seconds :

X7R/0805/2.2µF/25V;

X7R/0805/4.7µF/16V;

X7R/1206/4.7µF to 10µF/16V to 25V ;

X7R/1210/2.2µF to 10µF/16V to 50V, X7R/1210/2.2µF/100V ;

Maximum capacitance change as a function of temperature NPO: ± 30ppm

(temperature characteristic/coefficient): X7R: ± 15%

Operating temperature range: –55 °C to +125 °C

Table 11

Table 12

SOLDERING RECOMMENDATION

SOLDERING

METHOD

SIZE

0402 0603 0805 1206 ≥ 1210

Reflow Reflow only > 1.0 µF > 2.2 µF > 2.2 µF Reflow only

Reflow/Wave ≤ 1.0 µF ≤ 2.2 µF ≤ 2.2 µF ---

14

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

TESTS AND REQUIREMENTS

Table 13 Test procedures and requirements

TEST TEST METHOD PROCEDURE REQUIREMENTS

Mounting

IEC 60384-

21/22

4.3 The capacitors may be mounted on printed-circuit boards

or ceramic substrates

No visible damage

Visual

Inspection

and Dimension

Check

4.4 Any applicable method using × 10 magnification In accordance with

specification

Capacitance 4.5.1 Class 1:

f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C

f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C

Class II:

At 20 °C, 24 hrs after annealing

f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C

f = 120Hz for C >10 µF, measuring at voltage 0.5 Vrms at 20 °C

Within specified tolerance

Dissipation

Factor (D.F.) 4.5.2 Class 1:

f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C

f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C

Class II:

At 20 °C, 24 hrs after annealing

f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C

f = 120Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C

In accordance with

specification

Insulation

Resistance 4.5.3 Ur ≤ 500 V: At Ur for 1 minute

Ur > 500 V: At 500 V for 1 minute

In accordance with

specification

15

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5


Temperature

Characteristic IEC 60384-

21/22

4.6 Capacitance shall be measured by the steps shown in the

following table.

The capacitance change should be measured after 5 min at each

specified temperature stage.

Step Temperature(˚C)

a 25± 2

b Lower temperature± 3˚C

c 25± 2

d Upper Temperature± 2˚C

e 25± 2

(1) Class I

Temperature Coefficient shall be calculated from the formula as

below

Temp, Coefficient = C2-C1

C1 x106 [ppm/˚C]

C1: Capacitance at step c

C2: Capacitance at 125˚C

T: 100˚C (=125˚C-25˚C)

(2) Class II

Capacitance Change shall be calculated from the formula as

below

C = C2-C1

C1 x 100%

C1: Capacitance at step c

C2: Capacitance at step b or d

Class I:

C/C: ± 30ppm

Class II:

X7R: C/C: ±15%

16

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5


Adhesion

4.7

A force applied for 10 seconds to the line joining the

terminations and in a plane parallel to the substrate

Force

size ≥ 0603: 5N

size = 0402: 2.5N

size = 0201: 1N

Bending

Strength 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage

Conditions: bending at a rate of 1 mm/s, radius jig 5 mm

NPO: 5 mm

X7R/0402 to 0603: 5 mm

X7R/0805 to 1812: 3 mm

C/C

Class I:

NP0: within ± 1% or 0.5 pF, whichever

is greater

Class II:

X7R: ± 10%

Resistance to

Soldering Heat 4.9

Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature

Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute

Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute

Solder bath temperature: 260 ± 5 °C

Dipping time: 10 ± 0.5 seconds

Recovery time: 24 ± 2 hours

Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned

ΔC/C

Class 1:

NP0: within ± 0.5% or 0.5 pF, whichever is greater

Class II:

X7R: ± 10%

D.F. within initial specified value

I.R. within initial specified value

Solderability IEC 60384-

21/22

4.10 Preheated the temperature of 80 °C to 140 °C

and maintained for 30 seconds to 60 seconds.

Test conditions for lead containing solder alloy

Temperature: 235 ± 5 °C


Depth of immersion: 10 mm

Alloy Composition: 60/40 Sn/Pb

Number of immersions: 1

Test conditions for leadfree containing solder alloy

Temperature: 245 ± 5 °C


Depth of immersion: 10 mm

Alloy Composition: SAC305

Number of immersions: 1

The solder should cover over 95% of

the critical area of each termination

17

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5


Rapid Change of

Temperature

4.11 Preconditioning;

150 +0/–10 °C for 1 hour, then keep for

24 ± 1 hours at room temperature

5 cycles with following detail:

30 minutes at lower category temperature

30 minutes at upper category temperature

Recovery time 24 ± 2 hours

No visual damage

ΔC/C

Class 1:

NP0: within ± 1% or 1 pF, whichever is greater

Class II:

X7R: ± 15%

D.F. meet initial specified value

I.R. meet initial specified value

Damp Heat

with Ur Load IEC 60384-

21/22

4.13 1. Preconditioning, class II only:

150 +0/-10 °C /1 hour, then keep for

24 ± 1 hour at room temp

2. Initial measure:

Spec: refer initial spec C, D, I.R.

3. Damp heat test:

500 ± 12 hours at 40 ± 2 °C;

90 to 95% R.H. 1.0 Ur applied

4. Recovery:

Class 2: 24 ± 2 hours

5. Final measure: C, D, I.R.

P.S. If the capacitance value is less than the

minimum value permitted, then after the other

measurements have been made the capacitor

shall be precondition according to “IEC 60384

4.1” and then the requirement shall be met.

No visual damage after recovery

ΔC/C

Class 1:

NP0: within ± 2% or 1 pF, whichever is greater

Class II:

X7R: ± 15%

D.F.

Class 1:

NP0: ≤ 2 x specified value

Class II:

X7R: ≤ 2 x specified value

I.R.

Class 1:

NP0: ≥ 2,500 MΩ or

R x C ≥ 25Ω.F whichever is less

Class II:

X7R: ≥ 500 MΩ or


X7R/0805/4.7µF/16V ;

X7R/1206/10µF/16V to 25V ;

X7R/1210/2.2µF to 10µF/16V to 50V,

X7R/1210/2.2µF/100V ;

ΔC/C

± 20%

D.F.

≤ 2 specified value

I.R.

R C ≥ 5 Ω.F

18

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5


Endurance IEC 60384-

21/22

4.14 1. Preconditioning, class II only: 150 +0/-10 °C /1

hour, then keep for 24 ± 1 hour at room temp

2. Initial measure: Spec: refer initial spec C, D, I.R.

3. Endurance test: Temperature: NP0/X7R: 125 °C

Specified stress voltage applied for 1,000 hours:

4. High voltage series follows with below

stress condition:

Voltage NPO X7R

≤ 100V 2.0 x Ur 2.0 x Ur

200/250V 1.5 x Ur 1.5 x Ur

500/630V 1.3 x Ur 1.2 x Ur

≥ 1KV 1.2 x Ur 1.1 x Ur

5. Recovery time: 24 ± 2 hours

6. Final measure: C, D, I.R.

P.S. If the capacitance value is less than the minimum

value permitted, then after the other measurements

have been made the capacitor shall be precondition

according to “IEC 60384 4.1” and then the

requirement shall be met.

No visual damage

ΔC/C

Class1:

NP0: within ± 2% or 1 pF, whichever is

greater

Class II:

X7R: ± 15%

D.F.

Class1:

NP0: ≤ 2 x specified value

Class II:

X7R: ≤ 2 x specified value

I.R.

Class1:

NP0: ≥ 4,000 MΩ or


Class II:

X7R: ≥ 1,000 MΩ or


* Apply 1.5 x Ur for below items

X7R/0805/4.7µF/16V ;

X7R/1206/10µF/16V to 25V ;

X7R/1210/2.2µF to 10µF/16V to 50V,

X7R/1210/2.2µF/100V ;

ΔC/C

± 20%

D.F.

≤ 2 specified value

I.R.

R C ≥ 10 Ω.F

Voltage Proof IEC 60384-1 4.6 Specified stress voltage applied for 1~5 seconds

Ur ≤ 100 V: series applied 2.5 Ur

100 V < Ur ≤ 200 V series applied (1.5 Ur + 100)

200 V < Ur ≤ 500 V series applied (1.3 Ur + 100)

Ur > 500 V: 1.3 Ur

Ur ≧ 1000 V: 1.2 Ur

Charge/Discharge current is less than 50 mA

No breakdown or flashover

19

19


16V to 3KV



www.yageo.com

May. 23, 2019 V.5

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION

Version 5 May 23, 2019 - - Product range changed

Version 4 Jun.19, 2017 - - Product range updated

Version 3 Jan. 26, 2017 - - Global part number coding rule update

Version 2 Dec. 30, 2016 - - Dimension updated

Version 1 Dec. 16, 2016 - - Product range updated

Version 0 May 20, 2016 - - New datasheet for soft termination NPO & X7R series with

RoHS compliant

data sheet - rs componentssurface multilayer capacitor soft termination npo and x7r fication – v.5...

Documents