datasheet s5800-48f4s (481ge+410ge) high performance ... · datasheet s5800-48f4s (481ge+410ge)...

Optical Communication System

1

Datasheet

S5800-48F4S (48*1GE+4*10GE) High Performance Data Center Switch

Overview

FS S5800 Series is high performance Ethernet switche to meet next generation Metro, Data Center and Enterprise Ethernet network requirements designed based on high-end scalable chipset with integration of Layer 2 to Layer 4 packet processing engine, traffic management and fabric interface.

Configurations

Part Number Description

S5800-48F l 48x100/1000 Base-X SFP Ethernet PortlModular Uplink

S5800-24F l 24x100/1000 Base-X SFP Ethernet PortlModular Uplink

NM-4SFP+l Uplink Module for FS S5800 Seriesl 4x1G/10G SFP+ Ethernet Port (1G SFP compatible for S5800-48T&24T，1G

SFP is Combo with the last 4 RJ45 ports)

l Uplink Module for FS S5800 Seriesl 2x1G/10G SFP+ Ethernet Port (1G SFP compatible for S5800-48T&24T，1G

SFP is Combo with the last 2 RJ45 ports)NM-2SFP+


2

Datasheet

Primary Features and Benefits

I. Multiple Software Images to Provide Flexible Deployment Options

FS S5800 Series offers 6 different FiberstoreOS software images:l Enterprise Image: IP Base, IP Services and Advanced IP Servicesl Metro Image: Metro IP Base, Metro IP Services and Metro Advanced IP ServicesThe system vendors can choose the image with features for today and have the　　　　　　　 option for smoothly upgrading in the future.

IP Base IP Services Advanced IP Services

L2 Switching IP Base + IP Services +

Vlan Classification OSPF BGP

Static Link Aggregation, LACP IGMP v1/v2/v3 VRF-Lite

STP, RSTP, MSTP PIM-SM, PIM-SSM Static MPLS Forwarding

Static IPv4 Routing, RIPv1/v2 - -

VRRP - -

ACL, QoS - -

Storm Control, Port Security, MAC filters, DHCP Snooping, IP Source Guard, ARP Inspection, 802.1x, Radius

- -

Management:Telnet, TFTP, NTP,SSH,DNSSNMPv1/v2/v3RMON, Port&Vlan Mirror, sFlow

- -

Table 1- Primary Features in FiberstoreOS Enterprise Software Image

Table 2- Primary Features in FiberstoreOS Metro Software Images

Metro IP Base Metro IP Services Metro Advanced IP Services

IP Base+ Metro IP Base + Metro IP Services +

Selective QinQ OSPF BGP

VLAN Translation IGMP v1/v2/v3 VPWS

MVR PIM-SM, PIM-SSM VPLS

ERPS Route Map VRF Lite


3

Datasheet

Smart Link PBR Static MPLS Forwarding

Extended ACL * H-QoS LDP

Ethernet OAM (CFM, EFM) APS(G.8031, G.8032) MPLS/BGP VPN

* SyncE, 1588v2 * MPLS-TE/FRR

II.Carrier Class and High Performance Switching Core ASIC

FS S5800 Series Switches provides advanced L2/L3/MPLS features to meet therequirements in Carrier Ethernet and Enterprise network application.Single chip can provide 200Gbps high switching capability with main featuresincluding full IPv4/IPv6 stack, IPv4/IPv6 tunneling, Multiple Protocol LabelSwitching(MPLS), Hierarchy Quality of Service (H-QoS), On-chip OAM(802.1ag/Y.1731/CFM/EFM), Protocol Independent APS (<50ms protect switching) and1588/SycnE.

III.Multilayer Switching with High Capability at wire-speed

FS S5800 Series provides 176 Gbps switching capacity and 132 Mpps Layer2&Layer3packet forwarding rate with wire-speed for all ports. The switch provides 48 GE fixedEthernet ports, and 4 x 1000M SFP optical ports (Only for S5800-48T&S5800-24T) or 2/4SFP+ 1/10GE ports with different uplink modules to meet the requirement of high density1GE downlink ports and 10GE uplink ports.

IV.Modularized Uplink Port Design

The FS S5800 Series supports modularized uplink ports: NM-4SFPP with 4 SFP+ ports, NM2SFP+ with 2 SFP+ ports and NM-4SFP with 4 SFP ports (Only for S5800-48T& S5800-24T).Customers can select different modules according to the requirements which makegreat investment protection.

V.System Design for Green and Energy Saving

The FS S5800 Series supports modularized fans with speed control as well as powerconsumption adjustment which is based on the flow status of the ports. Both can highlysave the energy and go for green.

VI.Customized Profile for Different Deployment Scenarios

The Flexible Table Management (FTMTM) technology employed by Fiberstore FS S5800Series offers multiple table size configuration profiles as optimized choices for differentnetwork scenarios.


4

Datasheet

S5800-24F& S5800-48F could support up to 64K MAC address table.Besides these pre-defined profiles, application-specific profile is also applicable with Fiberstore Advanced Service.

VII.MEF Certification Ready Products

Carrier Ethernet is a huge growth area for emerging connectivity services which is a comparatively simple, cost-effective and familiar technology whose migration to the WAN will lead to more flexible network connectivity while reducing overall IT costs. However, its deployment is constrained by a shortage of global standards that provide assurance that equipment from different vendors will interoperate. In order to accelerate the adoption of Carrier Ethernet services and technology worldwide, Metro Ethernet Forum (MEF) initiated a certification program to assure them and their customers that products are compliant with MEF specifications. The Fiberstore FS S5800Series is ready to pass certification of MEF 9 and 14 supporting industry-standard Carrier Ethernet services and advanced QoS features.

VIII.Intelligent Ethernet OAM: Complete Fault Management and Performance Guarantee

End-to-end OAM based on IEEE 802.1ag and ITU-T Y.1731 enable Ethernet service providers to monitor their services proactively, measure end-to-end performance and guarantee that the customers receive the contracted SLA.Fault management includes CCM, LTM, LBM and performance measurement includes Frame Delay, Frame Delay Variation.FS S5800 series also supports single segment (link) OAM according to 802.3ah for remote management and fault indication, including remote loopback, dying gasp, and MIB parameters retrieval.

IX.Uninterrupted Performance Assurance and Multi-Node Redundancy and Robust Fault Protection System

l Hardware −Hot-swappable power modules and fans. −Power module supports AC or DC 1+1 redundancy. −Fans support N+1 redundancy. −Real-time environment monitoring for chipset temperature, status of fan and power, 　　　　 etc.l Software −LACP, ECMP, VRRP, STP/RSTP/MSTP, ERPS, SmartLink for redundancy and load- balancing. −Fiberstore-patented Sysmon for CPU status monitoring and protection upon unpredictable fault.


5

Datasheet

X.Outstanding QoS Control with Flexible Classification and Queuing Mechanism

Rich QoS mechanisms are implemented in Fiberstore FS S5800 Series includingflow classification based on source/destination MAC, source/destination IPaddress, protocol type, TCD/UDP port number to meet complicated networkrequirements.Moreover, Fiberstore FS S5800 Series provides 8 hardware queues per port tosupport multi-stage scheduling (WDRR, SP) and Tail Drop/WRED. 3-stage shaping(queue/group/port) can be applied for flow management. Meanwhile, ingressand egress policer provide bandwidth monitoring with a granularity of up to32Kbps. Both srTCM (Single Rate Three Color Marker) and trTCM (Two Rate ThreeColor Marker) can be supported.

XI.Triple-play Service Support with Bandwidth Guaranty for High Quality Application

The Fiberstore FS S5800 Series offers high bandwidth for Triple-Play services such asIPTV, video monitoring. The built-in QoS capabilities and flexible queuingtechnologies guarantee high quality of services.Rich multicast protocol set (IGMP Snooping, IGMP v1/v2, PIM-SM) supports up to16K multicast groups, 1K physical replications and 4K logical replications pergroup. With FiberstoreOS software, IPTV service and multicast time-delay control isfully supported.

XII.Comprehensive Network Security Policy

The Fiberstore FS S5800 Series supports subscriber-class, switch-class and networkclass security control.Basic IPv4/IPv6/MAC ACL is employed to filter IPv4/IPv6/Non-IP packetrespectively and can be applied to both port and VLAN. Besides that, extendedIPv4/IPv6 ACL is also available. In a single ACL rule, both IP and MAC ACE cantake effect to filter IP and Non-IP packets simultaneously.Fiberstore ARP Inspection and IP Source Guard features prevent network frommalicious ARP attack. CPU Traffic Protection, Storm Control features optimize CPUload. Centralized 802.1x authentication forbids illegal user access to the network.

Product Features and Benefits　 Feature Benefit

Triple-Play Services l Advanced QoS functionalities provide differentiated class of service treatment to support triple-play service.


6

Datasheet

lMulticast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs to reduce overall bandwidth requirement for multicast distribution in ring based network.

l Comprehensive security solution to provide protection of subscribers, switch, and network at the network edge.

MEF9 Services l Up to 4K EVC are supportedlQinQ based EPL/EVPL, ELAN/EVLAN service support

MEF14 Services

l Per port egress shaping and minimum 1Mbps increments up to port speed

l Ingress and egress per port policing and minimum 64Kbps increments up to port speed.

l CIR/PIR, srTCM / trTCMl Classification criteria , COS, Vlanl Ingress / Egress PBIT remarking – 802.1q VLANl Ingress / Egress PBIT remarking – 802.1ad SVLANl PBIT Transparency – 802.1q VLANl PBIT Transparency – 802.1ad VLAN

Intelligent Ethernet OAM

l Industry standard OAM 802.1ag (CFM) feature supports end-to-end network monitoring and troubleshooting. This greatly reduces OPEX for customers by reducing the numbers of site visits needed to troubleshoot network problems.

l Industry standard OAM 802.3ah (EFM) feature allows continuous standard Ethernet network across the globe, eliminating non-native transport such as Ethernet over ATM from the access networks, which eases OAM and provides compatibility with new transport media types, eg. PON.

Layer 2 VPN Service

l Fiberstore Selective QinQ feature strictly conforms to 802.1Q and 802.1ad and provides more flexibility to customers while classifying VLAN based on port, original VLAN or L2/L3 information for the purpose of segregating subscriber traffic in the network.

l VLAN translation in both ingress and egress translates VLAN IDs carried in the data packets between different virtual LANs or between VLAN and non-VLAN encapsulating interfaces at Layer 2.

l Virtual Private Wire Services (VPWS) provide point-to-point connectivity between customer sites, where the service provider network emulates a set of wires between the customer's sites over the underlying MPLS tunnel.

l Virtual private LAN service (VPLS) provides any-to-any (multipoint) communication over IP/MPLS networks to extend each site in a LAN to extend the edge of the service providers’ network.

l Port or VLAN based VPWS and VPLS are both supported; both services can work in raw or tagged mode.

lQinQ access based Hierarchical VPLS (H-VPLS) is also supported.


7

Datasheet

Layer 3 VPN Service

lMulti-VRF CE (VRF-lite) forms virtual packet-forwarding tables by associating one or more Layer 3 interfaces with each VRF, allowing the creation of multiple Layer 3 VPNs on a single Fiberstore FS S5800 Series Switch. Interfaces in a VRF could be either physical, as in an Ethernet port, or logical, as in a VLAN switch virtual interface (SVI).

l VRF-aware services (ARP, Ping, Traceroute, Telnet, SSH and FTP).l Support for multiple IP routing protocols (RIPv1/v2, OSPF) offers flexible

options for peering between end customers and service providers.l Fiberstore Multi Protocol Label Switching (MPLS)/ Border Gateway

Protocol (BGP) VPN technologies provide more scalability, better capability of management and higher efficiency by ASIC forwarding.

Availability and Reliability

Superior Redundancy for Fault Backup

l IEEE 802.1d Spanning Tree Protocol (STP) support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance.

l IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) allows a spanning-tree instance per VLAN, for Layer 2 load sharing on redundant links.

l IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides rapid spanning-tree convergence independent of spanning-tree timers and also offers the benefit of distributed processing.

l Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad.

l Equal-Cost MultiPath (ECMP) works for routing packets along multiple paths of equal cost for load balancing and redundancy.

l Virtual Router Redundancy Protocol (VRRP) is supported to create redundant, failsafe routing topologies.

l Fiberstore-patented Sysmon mechanism monitors real-time CPU status and pauses switch work while unexpected fault happens.

l ERPS (Ethernet Ring Protection Switching) is used to create a fault tolerant topology by configuring a primary and secondary path for each VLAN.

l SmartLink is a fault tolerant topology for two uplink application, can provide < 50ms protection time.

High-Performance IP Routing

l Basic IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], and RIPv2) are supported for small-network routing applications.

l Advanced IP unicast routing protocols (Open Shortest Path First [OSPF] and Border Gateway Protocol Version 4 [BGPv4]) is supported for load balancing and constructing scalable LANs.

l Protocol Independent Multicast sparse mode (PIM-SM) for IP multicast routing is supported.

l Up to 256 switch virtual interfaces (SVIs) are supported; all physical ports can be routed port.


8

Datasheet

l Proxy Address Resolution Protocol (ARP) allows a network host to answer the ARP queries for the network address that it does not have configured on the receiving interface.

lGratuitous Address Resolution Protocol (ARP) assists in the updating of other machines' ARP tables and helps detect IP conflicts and ensure load balancing on incoming traffic in some cases.

l IPv6 routing support in hardware for maximum performance.l VRRP provides dynamic load balancing and failover for routed links.

Robust Multicast Control

l Internet Group Management Protocol (IGMP) snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.

l IGMP Snooping TCN provides quick response capability to topology changes so that the service provider’s multicast service will not be paused even the topology is altered temporarily.

l IGMP immediate leave overrides the normal checks to see if there are other hosts or proxy devices on the local segment interested in the multicast group and shorten the time of changing channels for IPTV services.

l IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port.

l IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces to allow users on any downstream network to join an upstream sourced multicast group.

lMulticast VLAN Registration (MVR) allows one single multicast VLAN to be shared among different subscriber VLANs on the network which improves bandwidth utilization by reducing multicast traffic in the subscriber VLANs and simplifies multicast group management.

Bandwidth Optimization

l Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.

l Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

l Switch-port autorecovery automatically attempts to reactivate a link that is disabled because of a network error.

l Up to 256 Link Aggregation groups are supported with 8 member ports per group.

IPv6 Support

ASIC Chipset Based IPv6 Support

l Fully distributed handling and forwarding IPv6 packets at wire speed.l Chipset supports most of IPv6 routing protocol and tunneling protocol.l Support chipset based native tunneling.l Support chipset based IPv6 ACL and QoS.l Advanced chipset based IPv6 muliticast


9

Datasheet

QoS and Control

Advanced QoS

l Fiberstore QoS queuing mechanism differentiates flows according to any L2/L3/L4 identity and enqueues flexibly; meanwhile modifies CoS/DSCP and limits throughout.

l Ingress and egress policer is provided based on 802.1p Class of Service (CoS), Differentiated Services Code Point (DSCP), VLAN ID and QoS ACLs (IP ACLs or MAC ACLs), which can include source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields.

l Ingress and egress aggregate policer reinforces traffic policing across all of the applied ports. QoS applies the bandwidth limits specified in an aggregate policer cumulatively to all the flows matching the criteria.

lWeighted Random Early Detection (WRED) generally drops packets selectively based on IP precedence and packets with a higher IP precedence are less likely to be dropped than packets with a lower precedence; WRED ensures higher priority traffic to be delivered with a higher probability than lower priority traffic.

l In contrast to WRED, Tail Drop provides per QoS class congestion avoidance at the queues before a disruption occurs.

lQueue, service and port based three-level traffic shaping contributes to up to 64Kbps granularity.

lWeighted Deficit Round Robin (WDRR) extends the quantum idea from the DRR to provide weighted throughput for each queue. Different queues have different weights and the quantum assigned to each queue in its round is proportional to the relative weight of the queue among all the queues serviced by that scheduler.

l Strict Priority queue (SP) provides strict-priority queuing for a traffic class that enables delay-sensitive data, such as voice, to be sent before packets in other queues are sent. The priority queue is serviced first until it is empty.

l Strict priority queuing helps ensure that the highest-priority packets are serviced ahead of all other traffic.

l 8 egress queues per port help enable differentiated management of up to 8 traffic types across the stack.

l Support 8 differ-service domain, could provide flexible differ service for the ports.

l There is no performance loss when using advanced QoS functionalities.

Network Security

Comprehensive Security Solutions

l Subscriber Security −IEEE 802.1x allows dynamic, port-based security by providing user authentication.


10

Datasheet

−IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including that of the client. −DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as Address Resolution Protocol (ARP) poisoning. −DHCP Snooping helps administrators with consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database and to rate-limit the amount of DHCP traffic that enters a switch port. −Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol. −IP Source Guard prevents a malicious user from spoofing or taking over another user's IP address by creating a binding table between client's IP and MAC address, port, and VLAN.l Switch Security −Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions. −Multilevel security on console access prevents unauthorized users from altering the switch configuration. −RADIUS authentication facilitates centralized control of the switch and restricts unauthorized users from altering the configuration. −Three MAC based security mechanisms are offered to control access: MAC filtering MAC port binding MAC number limitation per port CPU traffic protection refuses abnormal data flow to avoid malicious attack.l Network Security −Fiberstore ACLs allows for multiple layer rules coexistence such L2 with L3, or even with L4. −Fiberstore security VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs. −Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports. −Three different mechanisms are supported to protect the STP topology from loops or undesired topology changes caused by addition of switches, mis-configuration of devices or even malicious attempts to override the current Spanning Tree Root Bridge. −Bridge Protocol Data Unit (BPDU) Guard −Bridge Protocol Data Unit (BPDU) Filtering −Root Guard −BPDU Guard and BPDU Filtering protect against possible loops created by switches added on ports configured with the STP Port Fast


11

Datasheet

Feature Benefit

feature. Root Guard protect against added switches attempting to become the Root Bridge.

Manageability

Superior Manageability

l FiberstoreOS Software CLI support provides common user interface and command set with all Fiberstore routing switches.

l IEEE 802.1ag Connectivity Fault Management (CFM) provides standard support for transport fault management. It allows for discovery and verification of path for Layer 2 services.

l IEEE 802.1ah Ethernet in the First Mile (EFM) allows detection of faults on an EFM link and enable service providers to fully monitor a customer’s end-to-end Ethernet service.

l Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination.

l Network Timing Protocol (NTP) client guarantees accurate and consistent time synchronization with the whole network.

l File Transfer Protocol (FTP) / Trivial File Transfer Protocol (TFTP) reduce the cost of administering software upgrades by downloading from a centralized location.

l Dynamic Host Configuration Protocol (DHCP) Relay allows a DHCP relay agent to broadcast DHCP requests to the network DHCP server.

l IGMP snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.

lMultifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-T, 100BASE-TX, 1000BASE-T, 10GBASE-LR indication as well as switch-level status LEDs for system, redundant-power supply, and bandwidth utilization provide a comprehensive and convenient visual management system.

Applications

I. Network Application 1: Enterprise Data Center Network

FS S5800 series can provide access ports for high density GE servers, and 4 10GE uplink ports to Aggregation or Core switches.Figure 1 shows a deployment example using the Fiberstore FS S5800 Series for Data Center Access network topology as TOR access devices.

Figure 1-Data Center Servers Access Network with FS S5800 Series


12

Datasheet

II.Network Application 2: Carrier’s Metro Network

Ring network topology allows service provider to establish robust network and operate multiple services. The Fiberstore FS S5800 Series is ideal for service provider Metro Ethernet access deployment, allowing providers to offer convergent application portfolio to their enterprise or individual users. Typically FS S5800 Series switches are installed in a building basement serving many customers in the branch building or at the head office.

Figure 2 shows the deployment example using the Fiberstore FS S5800 Series for ring network topology as access devices.

Figure 2-Ring Network Topology with the FS S5800 Series


13

Datasheet

Description Specification

Specification

l Up to 4K VLANl 32K/64K MAC addressl Configurable MTU: minimal 1518bytesl Up to 16000 bytes jumbo frame

Performance

l Switching capability: 128-Gbps (S5800-24T/ S5800-24F) 176-Gbps (S5800-48T/ S5800-48F)l Throughput: L2/L3 packet – 96Mpps (S5800-24T/ S5800-24F) L2/L3 packet – 130.95Mpps (S5800-48T/ S5800-48F)l CPU: Cavium CN5010-500BG564-CP-G/500MHzlMemory: 32 MB FLASH (Maximum 256MB extensible) 256 MB DRAM (Maximum 512MB extensible)

Connectors and Cabling

l 10/100/1000BASE-T ports: RJ-45 connectors Cat-5 UTP cablingl 100BASE-FX, 1000BASE-SX, -LX SFP-based ports: LC fiber connectors

(single-mode or multimode fiber)l 10GBASE-LR SFP+ based ports: LC fiber connectors (single-mode or

multimode fiber)

Table 3-Descriptions and Specifications

Product Specifications


14

Datasheet


l Ethernet Management port: RJ-45 connectors, Cat-5 UTP cablinglManagement console port: RJ-45-to-DB9 cable for PC connections

Power Supply

l AC: 150W Input Actual power consumption for 48 GE ports < 75W Actual power consumption for 48 GE and 4 x 10GE ports < 85W Operating voltage: 100 ~ 240V; 50/60Hz Maximum voltage: 90 ~ 264V; 47~63Hzl DC: 150W Input Actual power consumption for 48 GE ports < 75W Actual power consumption for 48 GE and 4 x10GE ports < 85W Operating voltage: -48 ~ -60V Maximum voltage: -36 ~ -72V

Indicators

l Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications

l System status LEDs: system indicationsl Power status LEDs: active, failure indicationsl Fan status LEDs: active, failure indications

Dimensions(H x W x D)

l S5800-24F4S: 4.36 x 44.0 x 40.0 cm (1.73 x 17.5 x 15.7 in.) l S5800-48F4S: 4.36 x 44.0 x 40.0 cm (1.73 x 17.5 x 15.7 in.)

Weight l S5800-24F4S: 6.3kg (One PSU, one 4x10GE SFP+ Card)l S5800-48F4S: 6.3 kg (One PSU, one 4x10GE SFP+ Card)

EnvironmentalRanges

l Operating temperature: 0 to 45 ºC (Long term) -5 to 55 ºC (Short term)l Storage temperature: -40 to 70 ºCl Relative humidity operating: 10 to 90% (non-condensing)l Relative humidity non-operating: 0 to 95% (non-condensing)

Acoustic Noise l International Organization for Standardization (ISO) 7779: < 45dB

MTBF

MTBF(Hours) MTBF(Years)l S5800-48F 174,374 19.9l S5800-24F 177,154 20.2l S5800-48F with 4SFP+ 144,669 16.5l S5800-48F with 2SFP+ 147,268 16.8l S5800-24F with 4SFP+ 146,578 16.7l S5800-24F with 2SFP+ 149,247 17

Table 4-Safety and Compliance


15

Datasheet


Safety Certifications

l Ready to UL to UL 60950, Third Editionl Ready to CE Markingl Ready to NEBS level 3

Electromagnetic Emissions Certifications

l Ready to FCC Part 15 Class Al Ready to CE

Warranty l Five years warranty

Image Part Numnber ID NO. Description

1G SFP Transceiver

SFP-GB-GE-T #20057 1000BASE-T SFP Copper RJ-45 100m Transceiver

SFP1G-SX-85 #29838 1000BASE-SX SFP 850nm 550m DOM Transceiver

SFP1G-SX-31 #29848 1000BASE-SX SFP 1310nm 2km DOM Transceiver

SFP1G-LX-31 #29849 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver

SFP1G-EX-55 #29854 1000BASE-EX SFP 1550nm 40km DOM Transceiver

SFP1G-ZX-55 #29856 1000BASE-ZX SFP 1550nm 80km DOM Transceiver

10G SFP+ Transceiver

SFP-10GSR-85 #58773 10GBASE-SR SFP+ 850nm 300m DOM IND Transceiver

SFP-10GLRM-31 #11590 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver

SFP-10GLR-31 #58774 10GBASE-LR SFP+ 1310nm 10km DOM IND Transceiver

SFP-10GER-55 #11592 10GBASE-ER SFP+ 1550nm 40km DOM Transceiver

SFP-10GZR-55 #11595 10GBASE-ZR SFP+ 1550nm 80km DOM Transceiver

SFP-10GZRC-55 #29799 10G SFP+ 1550nm 100km DOM Transceiver

Table 5- Supported Modules

Fiberstore GermanyBuilding 7, NOVA Neufahrn Gewerbepark, Am Gfild 1-11, 85375, Neufahrn bei Freising, Munich, GermanyTel: +49 8165 9904326

Fiberstore U.S. 331 Andover Park East Ste330, Tukwila, WA 98188, United StatesTel: +1-425-226-2035Fax: +1-253-246-7881

Fiberstore Hong Kong1220 Tung Chun Commercial Centre, 438-444 Shanghai Street, Kowloon, HongKongTel: +(852) 817 636 06Fax: +(852) 817 636 06

Fiberstore ChinaRoom 301, Third Floor, Weiyong Building, No. 10 Kefa Road, Nanshan District, Shenzhen, 518057, ChinaTel: +86 (755) 8300 3611Fax: +86 (755) 8326 9395

Copyright © 2009-2015 Fiberstore Copyright © 2009-2015 Fiberstore

Addresses, phone number and fax number also have been listed at www.fs.com. Please e-mail us at [email protected] or call us for assistance.

All statements, technical information, and recommendations related to the products here are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FS for more information.

Contact Us

Fiber Opitc Transceivers Copyright © 2009-2016 FS.COM All Rights Reserved.


Datasheet

Part Number Description

S5800-48F

l 176-Gbps switching capabilityl Standard 1U 19’’ rack mountablel 48x100/1000 Base-X SFP Ethernet PortlModular Uplink

S5800-24F

l 128-Gbps switching capabilityl Standard 1U 19’’ rack mountablel 24x100/1000 Base-X SFP Ethernet PortlModular Uplink

S5800-NM-4SFP+l Uplink Module for FS S5800 Seriesl 4 x1G/10G SFP+ Ethernet Port (1G SFP compatible for S5800-48T&24T，

1G SFP is Combo with the last 4 RJ45 ports)

S5800-NM-2SFP+l Uplink Module for FS S5800 Seriesl 2 x1G/10G SFP+ Ethernet Port (1G SFP compatible for S5800-48T&24T，

1G SFP is Combo with the last 2 RJ45 ports)

Ordering Information

datasheet s5800-48f4s (48*1ge+4*10ge) high performance ... · datasheet s5800-48f4s (48*1ge+4*10ge)...

Documents

datasheet s5800-48f4s (481ge+410ge) high performance ... · datasheet s5800-48f4s (481ge+410ge)...