day 1 severe storms forecasting jim ladue – wdtb 08 june, 2005
TRANSCRIPT
![Page 1: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/1.jpg)
Day 1 Severe Storms Forecasting
Jim LaDue – WDTB
08 June, 2005
![Page 2: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/2.jpg)
Topics
• Use today’s example to discuss 2-8 hour severe storms forecast strategies– Convective forcing – lines vs. isolated – Convective mode
• If isolated, what type?• If a line, what type? • Hazards type?
– Timing – • When is initiation likely?
![Page 3: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/3.jpg)
General philosophy
1. Diagnose the current weather with real observations first
2. Then compare reality to what the model analyzed
3. Then use the model and your understanding of its errors to make a prognosis.
![Page 4: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/4.jpg)
Which model run to believe?
![Page 5: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/5.jpg)
![Page 6: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/6.jpg)
A simple methodology for convective initiation
After that is figuring what stormtype there’ll be.
Analyze regions of potential
Convective instability
look for forcing mechanisms to destabilize the
atmosphere
Next look for low-level triggering
mechanisms
![Page 7: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/7.jpg)
General regions of potential convective instability
![Page 8: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/8.jpg)
• What fits your conceptual model best?
Forcing mechanisms
![Page 9: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/9.jpg)
Short-wave forcing
• 500 mb Q-vectors
![Page 10: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/10.jpg)
Synoptic forcing mechanisms
• Complications of playing the jetstream game
Cyclonic curved jet anticyclonic curved jet
Ascent only where the red dots are located
![Page 11: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/11.jpg)
• Playing the jet game isn’t as critical with a bowling ball low
![Page 12: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/12.jpg)
Forcing contd
• Vertical motion from the RUC
• Vertical motion acts to remove the CAP
• Not the only type of CAP remover
![Page 13: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/13.jpg)
Differential thermal advection
• Warm advection down below or• Cold advection up above• Bottom line, the sounding destabilizes
![Page 14: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/14.jpg)
• Differential thermal advection
• 700mb cooling
![Page 15: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/15.jpg)
• 850mb
• Ascent cooling
• Compensated by solar heating
Differential thermal advection/heating
![Page 16: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/16.jpg)
• Bottom line?
• Note lifting of the CAP at FWD
![Page 17: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/17.jpg)
Low-level forcing mechanisms• Low-level
frontogenesis– How deep is it?
• Dryline – Poor at forcing CI– That’s good
• Any other troughs?
![Page 18: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/18.jpg)
Deep frontogenesis
• Shows up from surface past 850 mb
![Page 19: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/19.jpg)
Surface boundaries
![Page 20: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/20.jpg)
Convective forcing summ
front
ogen
esis
DPVA
WAA
![Page 21: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/21.jpg)
Forcing, now coverage
• CI is underway. The strongest forcing areas will most likely generate linear modes
• But geometry of forcing, especially with boundaries is important
![Page 22: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/22.jpg)
Boundary geometry
• Things to consider– Boundary-relative steering layer flow– Boundary-relative anvil-layer flow– Shear relative to lines of forcing
![Page 23: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/23.jpg)
Boundary-relative steering layer flow
• Promotes more initiation if this value is small
• Can be good if CIN is a problem
• Too little CIN with forcing and this can be a problem
![Page 24: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/24.jpg)
Boundary-relative Flow Parameters
Boundary-relative flow
Boundary-relative storm motion
Storm motion
Flow
Boundary motion
![Page 25: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/25.jpg)
Effects of Boundary-relative kinematics on storm morphology
• Steering flow
Is the storm going to remain on, fall behind or overtake a boundary?
This may affect storm type beyond CAPE and shear
stable unstable
![Page 26: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/26.jpg)
Boundary-relative anvil-layer flow
• If parallel to a line of forcing:– This can promote interstorm seeding and cold
pool development
• If directed ahead of a the forcing line– Limits cold pool development greater chance
of isolated modes
• If directed behind line of forcing– Depends but it can promote a rear inflow jet
![Page 27: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/27.jpg)
Effects of Boundary-relative kinematics on storm morphology
• Shear
Shear vector
RM
LM
![Page 28: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/28.jpg)
Now given your expected coverage are likely, what are the threats?
• Severe winds,
• Severe hail
• Tornadoes
• Heavy rain
![Page 29: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/29.jpg)
Ingredients for supercells and severe squall lines/bow echoes
• Deep moist convection (CAPE> a few hundred j/kg)
• Strong vertical wind shear– Best represented by 0-6 km bulk shear– Subtract the winds at 6 km from the boundary layer– Can be represented by Bulk Richardson Number
Shear or BRN shear = 0.5 (Uavg)2
where Uavg is the difference from the mean 0-6 km wind and the mean wind in the lowest 500 m.
![Page 30: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/30.jpg)
Do I have enough shear?
If I have around 18 m/s (35 kt) of shear between 500 mb and close to the ground. Just eyeballing 500mb, look for at least 30kt in the lower plains and 20 kt in the high plains. I personally look for that 40kt of shear
![Page 31: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/31.jpg)
supercell motion
sfc
6 km
1. Draw the shear vector from the surface to about 6km (in red here)
2. Plot the mean 0-6km wind if it isn’t there already (green dot)
3. Plot a line perpendicular to the shear vector that passes through mean wind (thin line)
R
L
4. The right (left) mover is about 8 m/s right (left) of the mean wind along the thin line.
![Page 32: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/32.jpg)
Horizontal cross sections of supercell motion
Make sure you are aware of ordinary and supercell motion before leaving.
![Page 33: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/33.jpg)
Multicell Motion
If a multicell backbuilds, heavy rain is a potential threat Use original MBE Vector (“Corfidi”) Technique
After Corfidi et al. (1996)
Vcl = 0-6 km mean wind
Vllj = direction of 0-1.5 km wind
Vmbe = multicell motion
Vcl
Vprop = -VLLJ
VMBE
![Page 34: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/34.jpg)
Multicell Motion
4) Boundary interactions• Modulates/enhances development of new
convection
Blue = steering layer flowGreen=triple pt motionRed = multicell motion(Weaver, 1979)
![Page 35: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/35.jpg)
Supercell tornado threat• We don’t know the ingredients and this
is still frontier science• But here are some parameters to look
for deciding whether to chase or not.– High storm relative helicity (SRH),
especially in the lowest 1km– A strong sustained updraft, preferably
one that begins close to ground, strong buoyancy in low levels
– Warm moist rear flank downdraft, low LCL is a good starting proxy parameter
![Page 36: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/36.jpg)
Storm Relative Helicity
• Air that is spinning around on its axis in the direction of motion (a thrown football)
• It is storm relative, therefore one must anticipate storm motion prior to storms
• Best visualized on a hodograph • Also can be represented as a number in units of
m2/s2 and contoured• Usually measured in the lowest 3 km but now
measured also in the lowest 1 km.
![Page 37: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/37.jpg)
SRH• Recent research shows better discrimination
between tornadic and nontornadic supercells with 0-1km SRH. Most sounding programs and maps use 0 – 3 km SRH.
• Look at soundings for evidence of high 0 – 1 km SRH.
Edwards and Thompson, 2000
![Page 38: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/38.jpg)
Simple and perhaps better:0-1km shear
• Look for 20 kts or more for most significant mesocyclonic tornadoes
![Page 39: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/39.jpg)
SRH contd.SRH can be enhanced by supercells themselves, especially supercells utilizing high CAPE and shear.
Estimated hodograph within 20 km of the storm in following page.
![Page 40: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/40.jpg)
Warm moist RFD• This cannot be so
easily anticipated and every storm can have different RFD temperatures
• But high RH boundary layers with low cloud bases (LCL) seem to have some relation
Rasmussen and Blanchard, 1998
![Page 41: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/41.jpg)
Estimating LCL heights
• Look at surface obs in an unstable airmass – LCL = 222 (T – Td) LCL in feet, Temps in F
• LCLs should be less than 1500 m for best tornado threat
– LCL height also displayed from soundings
![Page 42: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/42.jpg)
LCL height on the SPC product
![Page 43: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/43.jpg)
This storm is creating its own SRH
CAPE = 4800 j/kgSRH initially at zero0-6km shear = 60kt
![Page 44: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/44.jpg)
Strong low-level buoyancy
• Recent research courtesy of Jon Davies, Bill McCaul, suggest strong low-level buoyancy is associated with most significant tornadoes.
http://home.kscable.com/davies1/LLbuoyprimer/LLbuoy_background.htm
![Page 45: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/45.jpg)
Strong low-level buoyancy
• There also is a lower Level of Free Convection (LFC) with most significant tornadoes.
http://members.cox.net/jdavies1/waf796/waf796.htm
![Page 46: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/46.jpg)
Strong low-level buoyancy
• There also is a lower Convective Inhibition (CIN) with most significant tornadoes.
http://members.cox.net/jdavies1/waf796/waf796.htm
![Page 47: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/47.jpg)
LFC height example
• A little marginal in SE OK. Good in NC KS
![Page 48: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/48.jpg)
Nonmesocyclonic tornadoes
• Prefer strong low-level vertical vorticity and good low-level lapse rates/buoyancy
![Page 49: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/49.jpg)
How to forecast HP, CL, LP supercells
• Storm-relative anvil layer winds likely affect the storm type– LPs more common with SR anvil winds > 30 m/s – Classics: SR anvil winds 18 – 30 m/s – HPs: SR anvil winds < 18 m/s.
• Storm-to-storm seeding – Several storms in close proximity seed each other
increasing rain potential and HPs
• Moisture– This is a distant third but very dry atmospheres may keep
storms LP
![Page 50: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/50.jpg)
Storm-relative anvil layer winds
SR winds in range for classics. Isolated storm becomes long-lasting Hoisington, KS storm. Photo by Corey Mead
![Page 51: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/51.jpg)
Interstorm seeding
Storm on flanking line merges with target storm.Result was possibly a complicated storm structure during initial stages and possible interruption in tornadogenesis.
![Page 52: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/52.jpg)
Forecast methodology
As you approach initiation time, concentrate more on satellite, surface, profilers, radars to update your analysis
– If the mesoscale models look good, use them for your supercell, tornado parameters.
![Page 53: Day 1 Severe Storms Forecasting Jim LaDue – WDTB 08 June, 2005](https://reader030.vdocument.in/reader030/viewer/2022032702/56649ccd5503460f94997a79/html5/thumbnails/53.jpg)
Summary
1. Determine expected convective coveragea. Low coverage implies updraft shear dynamicsb. High coverage implies organized multicells, cold
pool/shear dynamics in addition to updraft/shear dyamics
2. Then determine your storm type and main hazards
a. Many of the parameters can be used for multicell and isolated cell convection
b. Hodograph/Skewt analysis is important!
3. Do not trust the models