DBI-050-D

TITANIUM CHILLERMINI

5. GETTING STARTED5-1. Start Up

1.) Once all connections are made, circulate water through chiller before turning on the unit.

2.) Check all connections for leaks.

3.) Verify electricity rating, and then plug power cord into a dedicated electrical outlet.

4.) This unit has been factory-set at 77F.

5.) The Digital Display will read the current water temperature.

6.) The light indicator will begin to blink.

7.) Chiller will automatically turn on within 3 minutes.

8.) Your chiller has now been activated.

Changing setting temperature Example: To change setting temperature rang from 77℉ to 79℉

Press the UP buttonfor 5 seconds.

The Decimal Point willblink. Depress the UPbutton once the numberstarts to blink.

Set to desired temperaturesetting by pressing UP or Downbuttons.

The new temperature settingwill blink and be stored in thememory chip after 10 seconds.

℉

M I N I

1/15HP

DBI-050-D

Calibrating Water Temperature with Temperature Controller

Press the UP and DOWN buttonssimultaneously for 5 seconds. "CA"will appear on display screen.

Calibration Procedure Example : The actual water temperature is 65℉ ,but the thermostatindication is 70℉ . (The actual temperature differs from thethermostat indication.)

The newly calibratedtemperature setting will blinkand be stored in the memorychip after 10 seconds.

Depress both buttons when "CA" changesto numbers. The numbers on the display isa reading of the current water temperaturefrom the chiller's integrated probe.Calibrate to your tank's current watertemperature by pressing the UP or DOWNbuttons and depress.

It is recommended that you calibrate your chiller to your current water temperature uponintial installation.

DiagramElectrical

DBI-050-D

DBI-050-D

MINI TITANIUM CHILLER 1YEAR LIMITED WARRANTY

MINI TITANIUM CHILLER 1YEAR LIMITED WARRANTY