deanestor cat08 24pp new: · materials as part of the worktop and cupboard construction, ensuring...

Product Specifierhealthcare environments for lifeTM

With you for 50 years...

Britain’s leading healthcare furniture

www.deanestor.com

Throughout thisbrochure youwill see theDeanestorproduct codesymbolwhich shouldbe used tolocateDeanestorproducts forspecification.

Introduction

BS

As a market leader in the design, manufactureand installation of fitted healthcare andeducational furniture, we have extensiveknowledge and experience and have beensupplying the market since 1947.

Deanestor's manufacturing facility and offices are

integrated in a purpose built premise, based in the heart

of the East Midlands allowing us to access and service all

areas of the UK. The estimating, production scheduling,

project management and design teams are located in an

open plan office, which combined with our just in time

manufacturing method allows us to be exceptionally

flexible and provide a scope of works in accordance with

client requirements.

Deanestor is committed to delivering healthcare

excellence in every respect, from design and

manufacture to project management and installation. We

operate with purchase orders from the NHS trusts

through to multiple subcontracts under framework

agreements with main contractors under procurement

schemes such as PFI, Procure 21 and LIFT.

Our determination to supply healthcare environments in

parallel with construction requirements ensures

excellence for our clients as well as the end user. We

supply HTM63 & HTM71 furniture at Deanestor and also

manufacture education, dental, laboratory furniture,

bespoke reception counters, seating and nurse stations.

These are supplied with the same degree of expertise you

would associate with our healthcare range. In addition to

manufactured furniture we also stock and operate supply

chains for various fixtures and fittings that are required

under the N10 supply scope ‘NBS’ National Building

Specification.

As part of our ongoing diversification of supply scope and

in accordance with client requirements we have been

supplying and fixing IPS panels and full sanitary ware

packages under the N13. This avoids the coordination

issues, over lapping of supply on group 1 fittings and on

site trades which can often occur with the ADB coding of

FF&E works.

At Deanestor Plc we understand the role of Health and Safety,

not only from a construction site perspective but also for our on

site manufacturing facilities. We employ our own HS&E Manager

and every aspect of our operation has been

assessed for risks to ensure the safety of

our and your employee’s. We believe

that operational effectiveness and

good practise for Health and Safety

work are essential.

At our factory we have recently

implemented numerous changes

to our operating procedures from

our raw material off load to finish

good loading. As well as pedestrian

areas and demarcation lines we have

also implemented a programme of NVQ

training for our operatives.

From a site perspective Deanestor considers every aspect of

Health and Safety. Each Project Manager is CITB SMSTS and

IOSH trained. Our Site Managers are all either CITB SMTS or

IOSH trained and we have also adopted a recognised training

programme so they are able to administer First Aid. Our entire

on site operatives are a minimum CSCS qualified.

Our mandatory PPE for all operatives is Safety Helmet,

Boots, Vest and Glasses. Our team is also provided with

a range of gloves to suit each application, these are

mandatory.

1

Environment Commitment

tel: 01623 420041 fax: 01623 420061 email: [email protected]

Deanestor is committed to the use of sustainablematerials as part of the worktop and cupboardconstruction, ensuring that we not only meetproject objectives such as programme and costbut also reduce the impact of ouroperations on the environment.

All of Deanestor’s hard wood productscan be supplied with an FSC or PEFCcertification. Hardwood products areordinarily utilised by Deanestor onbespoke items such as reception desks,nurse stations and bench seating. All ofthe particle and fibreboard supplied byDeanestor is FSC certified.

As part of our commitment to theenvironment we are undertaking a programme to reduceour carbon footprint. The most affective way to reduce thisis to introduce a waste burner to provide heating to ourfactory however this also prevents the need for landfill.

HEALTH AND SAFETY

2

At Deanestor we have long understood theprimary considerations for storagefurniture in a healthcare environment itmust be robust, durable, functional,ergonomic and also free from infectioncontrol issues.

To enable us to meet the increasinglystringent infection control measuresDeanestor have adopted a continuousimprovement policy on its furniture. Whetherthis is in material selection, construction orancillary products as we can be flexible withour manufacturing due to our facilities wecan adopt the same with our global sourcingability.

In addition to the above measuresDeanestor have a commitment to sourcing afull anti-bacterial range. We are able to offeran extensive range of anti-bacterial laminate,with our 10 stock colours supplied anti-bacterial as a standard option. This laminateis from the Resopal Hipercare range whichhas been tested to European StandardEN438 and to ISO 4586 to prevent and isendorsed by the spread of bacteria, mostnotably the MRSA bacteria.

In addition to thelaminate all of ourmetal hardwareincluding handlesand hinges can besupplied with a BioCotecoating. This coating is a universallyrecognised and has been tested by anindependent laboratory to show it’s ability toinhibit the growth of bacteria, mould andfungi by up to 99.9% over a 24 hour period.

In addition to the above ancillary items suchas cantilever support legs are supplied withanti-bacterial polyester powder coatings asstandard and the same applies to our shelfbrackets and uprights.

Due to Deanestor’s parametricmanufacturing techniques integral corbelscan be provided which prevents thesandwiched panels affect which occurs whenend panels are screwed to the side of thecarcase to close off the service voids. Thesecannot be easily cleaned and are unsightly.

In addition to the above Deanestor are alsoable to manufacturer their base and wallunits with limited shelf locations so that areall internal surfaces are also wipeable.

INFECTION CONTROL

Clinical Issuesinfection control and lifecycles

As part of Deanestor’s ongoingcommitment to quality we able tooffer life cycles from 12 years up to25 years and guarantees from 1 ofup to 10 years. As Deanestor offersa diverse product range and materialselection each aspect of this mustbe considered to achieve the longestcycles and guarantees. We would bepleased to assist you in thespecification of our products toachieve this.

Operating for over 50 yearsDeanestor regularly undertakesrefurbishment projects to replace it’sown furniture. We believe that withincreased input at the specificationstage and with appropriate designconsiderations our units could be re-furbished in situe with onlyreplacement worktops necessary.

LIFE CYCLES

3tel: 01623 420041 fax: 01623 420061 email: [email protected]

Contents

CONTENTSTrue HTM63 assembly diagram

Our Interpretation what we offerof HTM63

True HTM71 assembly diagram

Our Interpretation what we offerof HTM71

Storage Cabinets base cabinets, wall -cabinets, tall cabinets

Typical Layout explanatory notes for HTM's

Worktops postformed, timber edged, -resin, laboratory solid grade laminate

Reception Counters bespoke reception counters -

Surgery drugs cupboards, ward -lockers, sloping canopy

Shelving shelves, uprights, brackets

Handles types, sizes, colours, finishes

General Information maintenance, fire rating, moisture content

Product Code Guide how to specify Deanestor

20 21

18 19

14 17

13

8 12

7

6

5

24

23

22

4

25

4

True HTM63

PD70 Worktop

Corbell(integral to the unit)

Faced End

Battern(white melamine

wrapped forinfection control)

The purpose of HTM63 when fully compliantis to provide suspended base units. Thisallows a clearance to the underside of theunit to facilitate a full and wet cleaningregime. These units are supported fromcantilever legs which are supported from thewall which ensures there are no fixingpenetrations through the floor

Deanestor have made incremental changesto standard HTM63 guide lines, one of thefirst changes was the supply of internalhinges – exposed hinges have recessedwhich cannot be cleaned. Other notableimprovements have been supplying amelamine wrapped wall fixing batten for theworktop support and ensuring all exposedsurfaces, seen or not are sealed with eitherlaminate or PVC edging. Our most recentinnovation has been a continuous plinth toavoid butting joints however to maintain thequality of installation this is still surfacemounted onto our box plinth.

The surface materials and constructionrequirements for HTM63 can all be met byDeanestor. The fully laminate carcass witha glued and dowelled construction attractsthe longest life cycles and warranty periods.

5tel: 01623 420041 fax: 01623 420061 email: [email protected]

HTM63 technical spec

DEANESTOR INTERPRETATION OF HTM63

VARIABLE BASE UNITBV

STANDARD BASE UNITVARIABLE PLINTH

BS

PD55

All of Deanestor units are pre-assembled and quality inspectedat our factory. The construction method for these is fullycompliant with HTM63, a glued and dowelled constructionwhich provides the durability required for Healthcare furniture.

Deanestor offer the PD55 worktop as standard, this is thesame profile as HTM63 however it does not provide the 15mmdown stand. There are several reasons for this, firstly the costis reduced, secondly the worktop finishes flush with thecabinet/ frontal and appears neater and thirdly as we are ableto adjust either the plinth or cabinet height this 15mm packerpiece is not necessary to achieve a 920mm working height.

As standard the PD55 type profile worktop will be priced witha BS type base unit. This provides a working height of 905mm.As standard Deanestor offer a variable plinth height to achievea 920mm working height a 115mm plinth height.

The BV base unit has been introduced so that the unit can bebetween 750 – 800mm high. This is so that a 100mm plinthwhich is often the skirting and coving height of vinyl flooringcan be maintain with any working height. This unit is atadditional cost as Deanestor is unable to achieve the samematerial optimisation with a base unit increased in height from850mm.

At Deanestor we appreciate that the success of Healthcareinterior is dependent equally on finishes and co-ordination. Weare prepared to work with the end user, architect, contract andother trade contractors to ensure every aspect of the FF&Epackage is co-ordinated to deliver a successful project.

Deanestor can manufacture fully HTM compliant furniturehowever due to the costs associated with this the generalminor deviations below are accepted.

Quirk line within the upstand.

MDF dove tailed drawer boxes.

The following derogations are often also agreed with the client.

Plinth mounting, our plinths are moisture resistant mediumdensity fibreboard with a standard black, grey or whitemelamine facing. High pressure decorative laminate can beprovided at additional cost.

Concealed hinge, our hinges are a Blum 170° opening clip typewith 3 dimensional adjustment. These are provided with a 25year warrantee.

RECOMMENDED

6

True HTM71

Wall Unit

PK20 Worktop

Battern

Faced End

Legs(supported from

the wall)

Corbell(integral to the unit)

Base Unit

Plinth Systembox type,

continuousoverlaid plinth for

infectioncontrol/asthetics

Tray

Tray

The purpose of HTM71 is to provide modularstorage however HTM71 units can besupplied open with liners for storage traysand baskets or with doors. The liners with thetrays or baskets allow instruments anddressing etc to be stored in an accessibleand organised manor which facilitates stockmanagement. In general HTM71 canincrease the volume of storage available withthe same footprint of HTM63.

Deanestor have made incremental changesto standard HTM71 guide lines. Theseinclude supplying all shelves 18mm thick asstandard. In addition to this all of our frontalsare still supplied manufactured from mediumdensity fibreboard with a high pressure ordecorative laminate facing. One advantageto the Deanestor HTM71 system is that thethey can be retro fitted into any of ourstandard base or wall cabinets, this offer thearchitect, client and the end user theflexibility to ensure that the units are laid putin a fully functional manner.

The surface materials and constructionrequirements for HTM71 can all be met byDeanestor and a full range is offeredincluding Pharmacy units.

7

HTM71 technical spec


RECOMMENDED

VARIABLE BASE UNITBV

TALL BASE UNITVARIABLE PLINTH

BT

PK40

DEANESTOR INTERPRETATION OF HTM71

All of Deanestor units are pre-assembled and quality inspectedat our factory. The construction method for these is fullycompliant with HTM71, a glued and dowelled constructionwhich provides the durability required for Healthcare furniture.

Deanestor offer the PK40mm profile at the same cost. Thisenables us to provide the same unit height and working heightwith other 40mm profile arrangements. This more substantialprofile is offered preferred from an aesthetics perspective.When this worktop does not span across base units and issupported by cantilever legs it also conceals any fixings unlikea 20mm profile.

As standard the PK20 worktop will be priced with BT baseachieving a working height of 920mm. Alternatively a BS unitswith 85mm plinth and PK40 can be provided to match ourstandard HTM63 working height of 905mm The PK40mmarrangement with a BV is available with nominal additional costto the base unit.

Deanestor offer a full range of HTM71 baskets and trays.These can be provided in either ABS which is in light blue andresistant to temperatures of up to 85 °C or polycarbonate,which is transparent and resistant to temperatures of up to121 °C.

CODE TYPE DEPTH WIDTH LENGTH

HB100/34 Basket 100 300 400HB100/46 Basket 100 400 600 HB200/34 Basket 200 300 400 HB200/46 Basket 200 400 600

Basket

CODE TYPE DEPTH WIDTH LENGTH

HT50/34 Tray 50 300 400HT50/46 Tray 50 400 600 HT100/34 Tray 100 300 400HT100/46 Tray 100 400 600 HT200/34 Tray 200 300 400HT200/46 Tray 200 400 600

Tray

BASKETHB

TRAYHT

8

Storage Cabinetsbase cabinets

SUSPENDED SYSTEM Deanestor offers a wide range of storage cabinets designed tomeet the specific requirements of healthcare environments fromwards and operating theatres to pharmacies and outpatientdepartments. Our storage furniture has been designed to be usedconjunction with our surgery, pharmacy, laboratory, ward and officefurniture ranges. A variety of finishes are offered to suit mostspecifications and budget requirements.

Deanestor manufactures healthcare furniture in accordance withthe HTM63, HTM71 and MDB guidelines, which are recognised byHealth Authorities and Trusts. The cabinet heights shown belowshould be used with the correct worktop fascia height, or thecorrect variable base unit dimensions, to achieve an overall 900mmstanding work height, 720mm to 750mm seating work height or a920mm HTM industry standard work height.

BS - Standard is a 750mm high cabinet with 150mm top drawer, 100mmplinth and is typically used with a 50mm fascia worktop - allows mostappliances to fit under the worktops without the need for fascia cut-outs.BM - Medical (MDB) is a 700mm high cabinet with 100mm top drawer,100mm plinth and is typically used with a 100mm fascia worktop - worktopfascia requires cut-outs for most appliances.BH - Suspended (HTM 63) is a 550mm high cabinet with 100mm topdrawer, no plinth and is typically wall mounted - has less storage spacethan traditional plinth mounted cabinets and is 450mm deep.BT - Domestic is a 720mm high cabinet with 120mm top drawer, 100plinth and is typically used with an 80mm worktop (optional 140mm plinthwith 40mm worktop available) - ideally suited for domestic applications.BL - Low is a 600mm high cabinet with 150mm top drawer, 100mm plinthand has been designed to be used with the BS or BM cabinets - useful forseating requirements.BV – Variable is a 865mm high cabinet with a 100mm plinth and providesa HTM working height with 55mm worktops.

Single Double

BH base cabinets and WH wall cabinets withlaminate doors (lacquerededge) and laminate PEworktop shown

HEIGHT HEIGHT PLINTHCODE DESCRIPTION DEPTH* (with plinth) (no plinth) HEIGHTBS Standard 500 850 750 100BM Medical (MDB) 500 800 700 100BH Suspended (HTM 63) 450 - 550 -BD Domestic 500 820 720 100BL Low 500 700 600 100BV Variable 500 865 765 100

Adjustable Shelves Metal Drawer Sides 170° Hinge

Blue indicates HTM 63 compliant dimensionsMaroon indicates MDB compliant dimensions

* Depth excludes service void (add 100mm to depth of cabinet for service voidand 150mm for void on HTM63 specification)

Base Cabinet Height and Depth Options (Height excludes worktop)

Stand

ard

- BS

Varia

ble

- BV

Tall -

BT

Med

ical (M

DB) - B

M

Suspe

nded

(HTM

63)

- BH

Low -

BL

Standing

HTM

Seating

Floor

750

100

Varia

ble

100

800

100

700

100

600

100

550

300

9



The Deanestor range ofwallcabinets are available in4 heights.

The Deanestor range of basecabinets are available in 6heights. Our range of tallcabinets are available in 2heights and tall lockers areavailable in 3 heights.

Hint: end cabinets can bespecified with corbel endsin order to conceal the rearvoid as shown above.

BS base cabinets and WMwall cabinets with ashveneer doors (solid ashedges) and laminate PEworktop shown

Available in four plinth finishes 100mm standard plinth height*

Black Grey White Unfinished

Laminate doors shown

Beech veneer doors shown

* May be ordered up to 170mm high as an option at extra cost.

Two-tone laminate doors with beechvertical edges shown

PLINTH MOUNTED SYSTEM

Corner “L” Corner

BASE TALL for use with 20/30mm worktops

BASE LOW for use with all worktop profiles

BASE VARIABLEfor use with all 40mm and55mm worktops

BT

BL

BV

Postformed laminate doorshown (800mm highcarcase, 100mm plinth)

Laminate door shown(600mm high carcase,100mm plinth)

Laminate doors shown(550mm high carcase,100mm plinth)

10


BASE STANDARD for use with PD70, PD55 andPG40 worktops

BS

BASE MEDICAL(MDB compliant)for use with PA100 worktop

BM

BH

Laminate door shown (750mmhigh carcase, 100mm plinth)

Beech door shown(700mm high carcase,100mm plinth)

Laminate doors shown(550mm high carcase, no plinth)

BASE SUSPENDED (HTM 63 compliant)for use with PD70 and PD55worktops

11

Storage Cabinetsplinth arrangements, wall cabinets


Single400500600

Double80010001200

Triple15001800

Single400500600

Double80010001200

Triple15001800

Cabinet Depth: 500mm plus100mm service void

Cabinet Depth: 450mm plus150mm service void

SUSPENDED ARRANGEMENT

WALL CABINETS available in 4 heights

Laminate door shown(600mm wide)

WXC WTC WMC WHC

Corner DoubleSingle• 900mm high wall units have 2

adjustable shelves

Fixing of Wall CabinetsDrill for use with screw and cup fittings50mm in from internal corners of units wherepacking blocks are provided. Do not counter-sink wall cabinet backs.

Wall Cabinet Height OptionsCode Description HeightWX Extra Tall 900WT Tall 750WM MDB 600WH HTM63 550

PLINTH ARRANGEMENT

FILLER PANELS

FW EP

FB DP

Wall

Base

FillersFront filler panels are designed tofinish flush with the unit doors andshould be secured by fixing asoftwood cleat to the rear of thefiller panel and by screwing throughthe carcase side into the cleat.Double panels are used as modestypanels. Corner panels are used oninternal corners to provide drawerclearance.

Filler-wall End panel

Filler-base Double panel

Hint: end cabinets canbe specified withcorbel ends in order toconceal the rear void.

12

Storage Cabinetstall cabinets, filler panels

TALL LOCKERS available in 3 heights TALL CABINETS available in 2 heights

Oak veneer door, melaminecarcase shown (1700mm highcarcase, 600mm wide, 100mmplinth shown)

Oak veneer door and carcase shown(1700mm high carcase, 1000mmwide, 100mm plinth shown)

• Tall lockers include a clotheshanging rail as standard andone fixed shelf

• Type A locker can be fitted witheither a pull-out endoscope orcatheter storage system

• Type B and C only available in1700mm high.

• Type D locker only available in2000mm high carcase

TL TC

• The 4 door type may beused as a patient server

• Cabinets may be orderedin a veneer finish tomatch our office furniturerange

13

Typical Layout


EXPLANATORY NOTES FOR HTMS

PROFILES

TH40

PH40 PG40

PK40

TH40 - Timber/Resin Edged see page 15for use in office/storage areas

PH40 - Post Formed see page 14for use in non clinical areas such as staff rest

PG40 - Post Formed see page 14HTM63

PK40 - Post Formed see page 14HTM71

One of the main issues for Healthcare projects now is thediffering clinical requirements. With primary care healthcentres, poly clinics and even acute hospitals the building oftenincorporate clinical areas, office areas, staff rest and patientwaiting.

With the various HTM’s, manufacturers recommendations andindividual preferences it can be difficult to integrate all this intoa single cohesive specification. At Deanestor we havedeveloped a range of worktop profiles and storage units whichcan be used for clinical and non clinical areas with the sameworking heights, patressing requirements and fixing details.This enables all co-ordinating aspects throughout the buildingto be standardised, from window cill and trunking heights to thespace planning for appliances.

Each of our for 40mm profiles has been designed to be fit forthe intended areas of use and to reflect up to date designrequirements. These are explained below. Please note with thisarrangement any sanitary ware adjoining our worktopsincluding HTM63 and HTM64 sit on sinks, slop hoppers ordisposal units may also be required with 40mm profiles and atnon standard depths. Deanestor offer a co-ordinating range asstandard.

600mm DoubleDoor Unit

1000mm DoubleDoor Unit

Same workingheight throughout

HTM63 40mmprofile

HTM71 400mmprofile

Seated WorkingHeight

ContinuousPlinth

14

Worktopspostformed

PA

PB

PC

PD

PE

PF

PG

PH

PJ

PK

PL

PM

PU

Surface FinishPostforming grade laminate available in over 50 plain colours asstandard and 30 pattern colours as an option at extra cost (seecolour chart).

LengthWorktops can be supplied without joints up to 3600mm asstandard (4100mm optional depending on colour and type oflaminate).

DepthStandard depths of worktops are from 300mm to 650mm. Other depths can be accommodated in increments of 50mm toa maximum depth of 1300mm depending on worktop profile.

Fascia HeightA range of heights from 20mm to 100mm depending on profileselected with 70mm being HTM63 standard.

Faced EndsMust be specified in the code when ordering. Plain ends supplied25mm oversize to allow for scribing to wall.

SubframeTimber softwood frame is provided loose for site fixing bycontractor, depending on profile of worktop.

Loose UpstandAvailable in 50mm height as standard. Use for notching aroundcolumns, recesses and return walls as required.

Fixing InstructionsWorktops are fixed through the softwood back rail at approximately600mm centres using plastic wall plugs to manufacturersrecommendations. If no subframe is fitted to the top, the installershould fit a softwood cleat to the wall and screw through the cleatinto the top. The units should then be positioned and fixedthrough the carcase tops into the worktops.Caution: worktops with integral upstands (types PA and PD)can only be mitred at 45o.

Optional loose upstand available



White laminate surface in profile PE worktop shown

Postformed worktops are recommended for use in cleanroom environments. If chemical resistance is requiredrefer to resin worktops or solidlaminate worktops.

CoreAll postformed worktops have a moisture resistant particle boardcore as standard and a moisture resistant fibre board core isavailable as an option at extra cost.

CoreAll postformed worktops have a moisture resistant particle boardcore as standard and a moisture resistant fibre board core isavailable as an option at extra cost.

Surface FinishLaminate available in the colours shown on our colour chart.Linoleum available as an option at extra cost.

LengthWorktops can be supplied without joints up to 3600mm asstandard (4100mm optional depending on colour and type oflaminate).

DepthStandard depths of worktops are from 300mm to 650mm. Otherdepths can be accommodated in increments of 50mm to amaximum depth of 1300mm depending on worktop profile.

Fascia HeightA range of heights from 20mm to 100mm depending on profileselected.

Faced EndsMust be specified in the code when ordering. Plain ends supplied25mm oversize to allow for scribing to wall.

SubframeTimber softwood frame is screw fixed to the underside of theworktop panel and fascia to profiles TA, TB & TC.

Loose UpstandAvailable in 50mm height as standard. Use for notching aroundcolumns, recesses and return walls as required. Upstands aresecret fixed by screwing through the softwood subframe into theworktop and upstand with No.8 CS woodscrews (requires drillingat a suitable angle). An alternative method for fixing is with screwsand cups through the front of the upstand or with siliconeadhesive.

Fixing InstructionsWorktops are fixed through the softwood back rail at approximately600mm centres using plastic wall plugs to manufacturersrecommendations. If no subframe is fitted to the top, the installershould fit a softwood cleat to the wall and screw through the cleatinto the top. The units should then be positioned and fixed throughthe carcase tops into the worktops.Caution: worktops with integral upstands (types PA and PD)can only be mitred at 45o.

Ash timber linoleum surface in profile TE with TU loose upstand shown

Timber faced worktops are recommended for use in generalstorage or office environments. Available in the following

species of wood: beech, oak and ash as standardand maple, cherry and sapele as an

option at extra cost.




Loose upstand

15

Worktopstimber edged


TB

TC

TE

TF

TH

TJ

TL

TM

TU

Please note timber edged worktops can now also be supplied with solidresin edges such as Corian, Wilson Art or Formica Senza.

NA

NB

NC

ND

NE

NF

NG

NH

NJ

NK

NL

NM

NU





Loose upstand

CoreAll solid surface worktops have moisture resistant particle boardbase supports.

Surface FinishResin (solid surface) material available in the colours shown onour resin colour chart.

LengthWorktops can be supplied without joints up to 3600mmdepending on colour. Joints are seamless and are not visible.

DepthStandard depths of worktops are from 300mm to 650mm. Otherdepths can be accommodated in increments of 50mm to amaximum depth of 1200mm.

Fascia HeightA range of heights from 20mm to 100mm depending on profileselected.

Faced EndsMust be specified in the code when ordering. Plain ends supplied25mm oversized to allow scribing to wall.

SubframeTimber softwood frame is provided loose for site fixing bycontractor, depending on profile of worktop.

Loose UpstandAvailable in 50mm height as standard. Use for notching aroundcolumns, recesses and return walls as required.

Fixing InstructionsThese worktops require specialist installation on site. Pleasecontact our technical department for details.

White resin finish in profile RF worktop shown

Resin (solid surface) worktops are recommended for use in clean room,operating theatre or laboratory environments. Spectacular designs can be achieved with resin materials.Also refer to lab grade worktops.

see email photo

16

Worktopsresin

LC

LB

LH

LJ

LL

LM

LU


Loose upstand

SOLID GRADE LAMINATE WORKTOPS

TYPICAL PENINSULA LABORATORY BENCHINGLGS

17

Laboratorysolid grade laminate worktops


White solid laminate with arrised edge shown

Solid Grade Laminate worktops are recommendedfor use in laboratory situations where chemical

resistance is required. Edges can be specified aseither radiused or arrised

Swan neck taps

Fixed and sealedupstand

Stainlesssteel sink

Service bridge/Reagent shelving

Modestypanel

Modestypanel

Table framearrangement

Electrical trunking

16mm solidgrade

laminate

18

Reception Counters

19

Reception Counters


Deanestor plc incorporates a bespokejoinery department employing 5 benchjoiners and 3 design draughtsman. With twocomputer aided design packages, CAD/ CAMfunctionality as well as parametricmanufacturing we are able to provide 3dconcept drawings as well as standard 2dmanufacturing approval details.

Through our extensive materials range andexperience of healthcare, education anddental environments we are able to offerreception counters and nurse stations withinnovative designs incorporating glass, solidresin and metal features as well as traditionallaminate or veneer facades.

As all of our bespoke works aremanufactured in the same facilities as ourfurniture we are able to utilise elements ofthe production line such as the beam sawand cnc profiling saw to reduce costs andattain the high quality finishes.

DW

UT

WARD DRUGS CUPBOARD

URINE TEST CABINET

Available in white melamine particle board or medium densityfibreboard (painted or laminated) with a white laminate door. Fittedwith security lock to comply with requirements (coloured dooroptional).

Glass shelves

CD020, CD015, CD010 A CD005 inside aPC cabinet

PC085

20

Surgerydrugs cupboards, ward lockers

CONTROLLED DRUGS CUPBOARDS WARD LOCKERWL

CD Range - Mild steel ‘Controlled Drugs’ cabinet, designed and manufactured tomeet “The Misuse of Drugs (Safe Custody) Regulations 1973”. This cabinetismost commonly used as an inner for the PC range cabinets.PC Range - Mild steel ‘Drug & Medicine’ cabinet, independantly security testedto BS2881:1989 (security level one) specification for cupboards for the storageof medicines in healthcare premises. This cabinet has a unique 12v DClighting/warning system which is CE marked and conforms to the low voltagedirectives 73/23/EEC, 89/336/EC and 96/68/EC.

DimensionsCD005 - w210 x d270 x h300 CD010 - w335 x d270 x h300CD015 - w335 x d270 x h550 CD020 - w500 x d300 x h550PC085 - w600 x d300 x h600

Deanestor offer a full rangeof bedside lockers from abudget particle boardmelamine construction tofibreboard high pressurelaminate. Due to parametricmanufacturing techniquesany size and combination interms of doors, flaps andlocks can be provided.Please contact theestimating department todiscuss these further.

NOTE FLAP wall mounted

Beech shown

NF

HANDBAG SHELF wall mounted

HBS

CD PC

Surgerysloping canopy


SLOPING CANOPYSC

For use with wall cabinets in cleanroom environments

30° OR 45°ANGLE

21

CATHETHER STORAGE UNIT

ENDOSCOPE STORAGE UNIT

22

Shelving Systemsshelves, uprights, brackets

Melamine facedparticle/fibre boardshelf with 2.0mm PVCedge

Laminated particleboard shelf shelf with2.0mm PVC edge

Optional hardwoodlipping on veneer

WALL SHELVINGLengths in increments of 50mm from 300mmto 2800mm depending on surface finishspecified. Depths from 150mm up to 650mmin increments of 50mm (refer cross-sectionsketches below).

METAL UPRIGHTSAvailable in Black or White finish in sevenlengths 430mm, 710mm, 1000mm,1220mm, 1600mm, 1980mm and2400mm.

METAL BRACKETSAvailable in black or white finish in four sizesto suit shelf depths from 150mm to 650mm(actual bracket sizes are 120mm, 170mm,220mm, 270mm, 370mm, 470mm and610mm).

FIXINGWall uprights are fixed with 75mm x No.10 CSwoodscrews. Brackets are not usually fixeddirectly to the shelves as this prohibitsadjustments. We recommend No.8roundhead woodscrews positioned in theunderside of the shelf to locate with the frontinner face of the bracket. This holds the shelfin position and allows removal foradjustments. Ensure vertical noggins areprovided for uprights to suit our recommendedfixing centres. Measure screw length to ensurecorrect size.

FINISHESAll of our brackets and uprights are suppliedpolyester powder coated to RAL9016. This isan Interpon AB type which has been tested byan independent microbiological laboratory andhas proven effective at inhibiting the growthof the following bacteria:-Listeria monocytogenesEscherichia coli 0157Samonella enteritidisStaphylococcus aureus (MRSA)Bacillus subtilisPseudomonas aeruginosaSalmonella typhiniumStreptococcus faecalisLegionella pneumophilaVibrio parahaemolyticusEnterobacter aerogenes

Please contact our estimating department forany non standard shelving bracketrequirements such as alternate colours ormaterials.

WS

SU

SBA SBF

Upright lengths

Wall shelving cross-section

WSM

WSL

WSV

Recommended centres for mounting metaluprights or fixed brackets

23

Handlestypes, sizes, colours, finishes


Nylon handle colours

If you require non standard handles, please contact our estimatingdepartment for information

HPA

HRP

HPN

HPM

HPM

HPM

6

20

52

33 30

1 12 60

96mm Metal (recessed)

Metal handlesAvailable in 2 styles: curve or ‘D’ pull and available in 5 finishes:matt nickel, stainless steel, polished chrome, black or white.

Nylon handlesAvailable in 96mm ‘D’ pull. Also available in 8 colours: white (1), yellow (12), dark green (60), red (33), dark brown (30),grey (20), blue (52), green (6)

Plastic handlesAvailable in 4 colours: black, white, grey and brown.

Aluminium handlesAvailable in satin anodised aluminium.

96mm Nylon (‘D’ pull)

96mm Aluminium (‘D’ pull)

192mm Metal(black curve)

192mm Metal (chrome ‘D’ pull)

192mm Metal(chrome curve)

24

General Information

Manufacturing TolerancesThe sizes quoted are nominal and the actualdimensions may be 1mm more or 2mm less.

Moisture ContentAll assemblies and components leaving thefactory have a moisture content not exceeding12%.

Fire RatingIndicative surfaces spread of flameclassification to BS476: part 7 shows class 1for plastic laminates, class 2 for melaminesurfaces and class 3 for veneers. Werecommend you check fire regulations beforespecifying finishes.

Effect of LightDeanestor makes every effort to match realwood veneers during manufacture. However,surfaces will tend to darken over a period oftime (the darkening effect tends to remainuniform, provided the veneer is not placed partin shadow and part in sunlight).

PackagingFurniture supplied by Deanestor is cleaned andwrapped for protection during transport. Wegenerally deliver using our own transport.

IdentificationEach item of furniture is labelled identifying thetype of product and room location.

Site Access and Storage ConditionsAccess should be readily available withadequatelabour for off loading and aresponsible signatory for checking receipt ofitems. Deliveries will usually be made duringnormal working hours, althoughspecial requestswill be accommodated. Ambient conditions onsite for storage and fixing must be clean, withinthe temperature range 10-24ºC and within therelative humidity range of 20-65%. Whenstoring veneered furniture prior to installationdo not store in direct sunlight. Sunlight shouldnot affect melamine or plastic laminatesurfaces.

Maintenance of furnitureEach item of furniture is labelled identifying thetype of product and room location.When cleaning the furniture the following pointsmay be helpful: laminates, melamines, solidsurfaces and solid laminates can be cleanedwith mild detergent and warm water. A non-abrasive scouring solution can be used forstubborn marks but should be used sparingly toavoid scratching or penetration of the surface.A mild detergent on a damp cloth may be usedto clean off veneer surfaces. Stubborn marksand stains can be removed by the use of whitespirit, but this should be used sparingly. Forareas requiring polishing, use a wax polish in

small amounts applied with a clean muslincloth.

For other marks or stains, we will be happy toassist with information regarding possiblemethods of treatment. Periodic repolishing oftimber may be necessary in heavy work areasusing a brush-on clear lacquer.

LaminatesLaminates are 0.9mm thick and slightlytextured. For all colours and finishes pleaserefer to our colour chart.

PlinthsConstructed from hardwood or fibre boarddepending on range. Hardwood plinths are paintfinished in black, grey, brown or white. Castorsor adjustable feet can be fitted to plinths ifrequired.

Removable BacksRecommended for base cabinets with sink unitsand to areas where it is necessary to gainaccess to services. Removable backs arestandard on our surgery and laboratorycabinets.

Show BacksThese can be specified when the rear of thestorage cabinet is visible after installation. Thefinish will match the carcase material.

Carcase FinishAll carcasses are of 18mm or 19mm thickmaterial with rigid doweled construction and allexposed edges are lipped. Back panels to baseand wall units are 4.8mm white melaminefaced hardboard (or 6mm fibre boarddepending on range) grooved into cabinetpanels. Removable backs are of the samematerial.

Front fillersFor areas where base or wall cabinets do notabut a wall and leaves a gap. Note that drawerunits placed near a wall should have a filler toallow clearance. Please see the coding guidefor specifying the required size, height andwidth. Base fillers are supplied with a plinth asstandard.

Rear fillersFor the service void behind the base cabinets.The infill panel will be required at ends of thebase cabinets if corbel ends are not specified.Please see the coding guide for specifying therequired height and width. Filler as supplied witha matching plinth line.

Corbel endsFull end panels are available and should beused in preference to rear fillers on the end ofcabinet runs to conceal rear services void.

Blank endsUsed instead of a door on base corner units.Cabinets fitted with a blanking panel aresupplied with a centre-post hung door, togetherwith a 50mm corner filler and full with shelf asstandard

HandlesA wide choice of handles are available tocompliment your intended colour scheme. Ifyou require a different handle, we would be topleased to provide these as a special order.

LocksThese are supplied to the top drawer only andto doors when specified. Locks are notsupplied suited unless specified.

Floor & Wall Mounted Corner UnitsThe door is a bifold type opening through 170ºusing metal hinges with magnetic door catches.The general design and the 170º door openingallows complete access to the interior of thecabinets, making optimum use of cornerinstallations. Both cabinets come with anadjustable shelf. The cabinets are only availablein the sizes shown. B80, B100 and B120 canalso be specified with a blank end for cornersituations.

ShelvesAll single base and wall cabinets are suppliedwith one adjustable shelf unless otherwisespecified. Double base and wall cabinets havetwo shelves (one each side of the division).Triple base and wall cabinets have three shelves(one each side of the division). Additional unitshelves or full width shelves are available uponrequest.

Glass DoorsGlass sliding doors are only offered on wall unitsas standard. Glass sliding doors are 6mm clearplate with all edges polished and a chromefinger pull.

Help us to help youWhen requesting a quotation or placing anorder please use our new and simplified productcodes.

The green issueAt Deanestor we believe in manufacturing ourfurniture in an environmentally responsible way.Our equipment is tested for emissions on aregular basis. We only purchase timber andveneer from suppliers who can certify that thematerials they supply have been obtained frommanaged sources.

Deanestor reserves the right to change thespecification and/or design of their products withoutprior notice. Colours and/or textures indicated inthis brochure are representative only.

Specifier Guidehow to specify, storage cabinets

tel: 01623 420041 fax: 01623 420061 email: [email protected] 25

The Deanestor product code system has been developed with easeof use and accuracy of information in mind. All products start with analpha short code, which is either 1, 2, or 3 characters long. Belowis an explanation of the base cabinet code.

The base cabinet product has a 2 character alpha short code(referred to as part 1 of the code), which specifies the type of base

cabinet as either BS, BM, BH, BD, BL or BE. Part 2 of the code refersto the width of the cabinet in cms. Part 3 of the code refers to thedoor hand. Part 4 of the code refers to the number of drawers. Part5 of the code refers to the lock. Part 6 of the code refers to theoptions of a fixed, removable or show back. Part 7 of the code refersto the corbel ends. The full 7 part code must be specified in order tocorrectly order the desired product.

BASE CABINETS1 2 3 4 5 6 7

example: B S 1 0 0 / R 1 L F B

1 Product2 Width3 Door hand4 Drawers5 Lock6 Back7 Corbel Ends

1 PRODUCT BS: Base Standard (750mm high)BM: Base MDB (700mm high)BH: Base HTM 63 (550mm high)BD: Base Domestic (720mm high)BT: Base Tall (800mm high)BV: Base Variable (variable height)

2 WIDTH (cm) 40: 400mm (single)50: 500mm (single)60: 600mm (single)80: 800mm (double)100: 1000mm (double)120: 1200mm (double)150: 1500mm (triple)180: 1800mm (triple)

3 DOOR HAND -: NoneL: Left HandR: Right HandD: Double DoorsS: Sliding Doors (double only)

4 DRAWERS -: None1-5 Drawers (see brochure)

5 LOCK -: NoneL: Lock (top drawer only)

6 BACK F: Fixed BackR: Removable Back

7 CORBEL ENDS -: NoneL: Left HandR: Right HandB: Both Sides

WORKTOPS1 2 3 4 5 6 7 8P A 50 /600 /50 /2600 P F

1 PRODUCT P: Postformed WorktopT: Timber Edged WorktopN: Resin Solid SurfaceL: Solid Grade Laminate

2 STYLE A,B,C,D,E,F,G,H,J,K,L,M(see brochure)

3 FASCIA 20: 20mm (Profile K,L,M)30: 30mm (Profile K,L,M)40: 40mm (Profile G,H,J,K,L,M)50: 50mm (Profile A,B,C,D,E,F)55: 55mm (Profile D,E,F)70: 70mm (Profile D,E,F)80: 80mm (Profile A,B,C)100: 100mm (Profile A,B,C)150: 150mm (Profile A,B,C)

4 DEPTH 330: 330mm350: 350mm500: 500mm530: 530mm550: 550mm560: 560mm600: 600mm630: 630mm650: 650mm660: 660mm700: 700mm750: 750mm1200: 1200mm

5 UPSTAND -: None50: 50mm

6 LENGTH up to 3600mm

7 LEFT END P: PlainF: FaceJ: JointM: MitreS: Splay

8 RIGHT END P: PlainF: FaceJ: JointM: MitreS: Splay

HOW TO USE DEANESTOR PRODUCT CODES:

Please call us for your free copy of our latest product code guide

www.deanestor.com

Email: [email protected] Visit our website www.deanestor.com

Deanestor PlcWarren WayCrown Farm Business ParkMansfieldNottinghamshire NG19 0FLTelephone: 01623 420041Facsimile: 01623 420061

Crown Farm Way

Long Stoop Way

Kilton AvenueAvenue

Eakring Road

Jubilee Way

Eakring Road

HeathAvenue

FairfieldDriveDrive

Charmw

ood

Grove

Grove

Cansbrook

AvenueAvenue

Violet Hill

StainsbyDriveDrive

Alport

PlacePlace

Crown Farm Way

Violet Hill

Oak Tree

LaneLane

Fletchers

Badger WayWay

Ratcher W

ayW

ay War

ren

Way

Way

Avenue

e

Drive

Grove

ook e

Avenue Drive

Place

Lane

Way

Way

Mansfield

We AreHere

deanestor cat08 24pp new: · materials as part of the worktop and cupboard construction, ensuring...

Documents