D E C O R A T I V EA R C H I T E C T U R A LC O N C R E T ES O L U T I O N S

Since entering the business in January 1999, SureCrete has been the leader in high-quality, innovative, decorative and restoration concrete solutions. Our company was founded on the idea that craftsmen need not be chemists to deliver the looks, finishes, and solutions their customers want.

In 1999, SureCrete formulated the industry’s first full-line of single-component; just-add-water, overlay bag mixes. As SureCrete grew, so did our product line. Contractors asked for a user-friendly system to replace acid stains, so in 2005, we introduced an environmentally friendly water-based stain called Eco-Stain, available in thirty standard colors. In 2007, we then followed up with our Xtreme Series line and created a high-strength, fast-cure, Glass Fiber Reinforced Concrete mix in a bag. This patented system turned the counter-top industry upside down! In 2012, SureCrete debuted the On Demand Tinting System. This gave our distributors the power to offer a variety of color options to instantly tint acrylics, epoxies, urethanes, and polyaspartics with the same pigments. With this proprietary system, retailers can now tint commercial-grade coatings in a matter of minutes, with a minimal stocking investment.

At SureCrete, we pride ourselves on the quality and consistency of our product-line and truly believe that a company should stand behind not only its products, but also the entire system. 99% of all the products in this catalog are manufactured and quality controlled by SureCrete and our in-house chemist. Our products are available in over 140 stores in the USA, as well as Canada and multiple international locations.

On behalf of SureCrete, I would like to personally thank our customers for their continued support, while also welcoming new customers to the SureCrete family.

Jack Thomas

THANK YOU FOR CHOOSING SURECRETE.

Jack ThomasCEO of SureCrete Design Products

02

FLOORING • WALLS • COUNTERTOPS

PRODUCT DEPARTMENT INDEX

SURFACE PREPERATION PRODUCTSSCR,Flash Patch, SCT-22, SCT-EP, Elasto-Shield,

Fast Strip Plus, Enviro-Strip, Glue Remove, LD 1800, Retarder,

Surface Delay, Deep Patch, Sure Bond, SC Polymer

CONCRETE OVERLAY FLOORSTruTop, SureSpray, SureTex, SureBroom, SureBond, SureStamp

CONCRETE OVERLAY WALLSWallSpray, WallStamp

CONCRETE COLORANTSSC TruColor, SureStain, TruCast, TruPour, TruTique

SECONDARY COLORINGEco Accent, Eco-Stain

XS BAG MIX KITSXS Precast, XS Face, XS Terrazzo, XS Backer

XS COLORANTS • SEALERS • ACCESORIESXS TruColor, XS Veining, XS-327, XS PC12, XS Packing, XS Slurry,

Foam Rails, Clear Facing Tape, PSA Tape, Edge Profiles

CLEAR ACRYLIC SEALERSHS 200, HS 200LV, HS 300, HS 300LV, Super 30,

Super WB, Super 20, CS 250, CS 250LV, CS 125LV

CLEAR HIGH-PERFORMANCE COATINGSHow to Choose a Coating, DK 700, DK 400WB, DK 400, DK 120,

DK 180, DK 500, DK 600WB, SureFinish, SC Matting Agent, SureGrip

DK METALLIC • DK FLAKE

COLORTEC (PIGMENTED) SEALERS & COATINGSColorTec Acrylic’s, ColorTec 400WB, ColorTec 600WB, ColorTec 400,

ColorTec 180, ColorTec 500, ColorTec Top 30 Colors

04-17

18-19

20-21

22-27

28-29

30-34

35-37

38-41

42-47

48-52

53-61

62-63

64-69

WATER BASED

SOLVENT BASED

ECO FRIENDLY

03

COLORTECThe On Demand Tinting Station is your exclusive source to color high performance sealers and coatings for concrete. Choosing ColorTec means premium pigments,

fantastic fade resistance, and incredible hide.

COLORTEC PRODUCT TYPES:

• SOLVENT ACRYLIC

• LOW VOC SOLVENT ACRYLIC

• WATER-BASED ACRYLIC

• SOLVENT POLYURETHANE

• WATER-BASED POLYURETHANE

• POLYASPARTIC

• WATER-BASED EPOXY

• 100% SOLIDS EPOXY

™

04

UV STABLEPH & ALKALINE RESISTANT

FADE RESISTANT

SOLVENT ACRYLICpg.64

WB POLYURETHANEpg.65

WB EPOXYpg.65

EPOXY 100%pg.67

05

METALLIC FLOORINGHigh-Performance epoxy metallic’s are the latest in three-dimensional floor

designs. Use of this commercial grade interior system, will create a luxurious, one-of-a-kind floor for residential, retail, and office spaces.

06

COLORTEC WB EPOXYpg.65

CLEAR EPOXY 100%pg.58

DK METALLICpg.62

SOLVENT POLYURETHANEpg.56

+

+

+

07

FLAKE FLOORINGSlip resistant flooring for interior applications has made decorative

Flake Flooring a popular application with endless color designs and rugged longevity. Also available in one-day system applications.

08

COLORTEC WB EPOXYpg.65

DK FLAKEpg.63

SOLVENT POLYURETHANEpg.56

+

+

09

STAMPED CONCRETECreate endless design and color combinations for fresh poured concrete.

Replicate the look of stone, brick, or even wood while increasing durability and strength.

10

COLOR HARDENERpg.32

INTEGRAL COLORpg.33

POWDER RELEASEpg.34

CURE & SEALpg.51

OR

+

+

11

THIN OVERLAYSResurfacing interior and exterior concrete floors is made easier

through the use of self-bonding concrete overlays. Refined textures, colors, and designs for interior and exterior surfaces.

12

MICRO-TOPPINGpg.22

SURESPRAYpg.23

SURETEXpg.24

SUREBROOMpg.25

13

VERTICAL OVERLAYSCreate a new decorative interior or exterior concrete surface through

the use of our thin build and carvable self-bonding overlays.

14

WALLSPRAYpg.28

WALLSTAMPpg.29

MICRO-TOPPINGpg.22

15

CUSTOM CASTINGCreate high-quality, lighter weight concrete: countertops, fireplaces, mantles,

furniture, and other architectural elements. Xtreme Series & D-FRC mix designs will help you bring any color and/or design to life.

16

XS PRECAST KITpg.38

XS FACE KITpg.39

XS TERRAZZO KITpg.40

XS BACKER KITpg.41

17

“ENDLESS POSSIBILITIES”

FROM ONE SOURCE.18

CLEAR SEALERS& COATINGS

COLORTEC SEALERS& COATINGS

CONCRETEOVERLAYS

The industry’s most complete line of self-bonding, single component, cement-based overlays for interior and exterior applications.

SURFACEPREPARATION

Chemical surface preparation products including cleaners, etchers, mastic remover, cement-based patching products, and crack treatments.

CONCRETECOLORANTS

High-quality dry pigments, designed to color concrete and concrete overlays. Also includes color hardener, powder release, and reactive acids.

CLEAR SEALERS& COATINGS

Protection products for both interior and exterior concrete surfaces, including Super, HS Series, CS Series, and the high-performance DK Series (Dura-Kote).

XTREME SERIESPRODUCTS

High-performance and high early strength concrete castings mixes, colorants, sealants, and forming products.

ECOCOLORANTS

This environmentally friendly division is home to the industry’s best water-based concrete stain and colorwash products.

20-21

22-29

30-34

35-37

38-47

48-63

64-69Powered by the On Demand Tint Station, these products utilize fade-resistant pigments designed specifically for use on alkaline surfaces such as concrete.

19

SURFACE PREPARATIONPRODUCT OPTIONS

SCR

Super Concrete Renovator combines three products in one — a strong detergent,

degreaser, and acid — to ensure proper cleaning and etching for concrete overlays,

stains and sealers.

FLASHPATCH

High-strength, concrete patching material that is rapid-setting and self-bonding.

Patch up to one inch to feather. Available in 4lb. jar or 50lb. bag.

™

™

20

SURFACE PREPARATION

FLASHPATCH

CRACK TREATMENT & PREVENTION

STRIPERS & REMOVERS

LIQUID SURFACE SOLUTIONS

PATCH & PRIME

Rapid setting

ultra-low viscosity

urethane spall and

crack treatment.

SCT-22™

Traditional epoxy

and sand based

crack filler for

concrete.

SCT-EP™

Elastomeric

membrane for

waterproofing and

crack prevention.

ELASTO-SHIELD™

Aggressive solvent

based sealer and

coating stripper.

FAST STRIP PLUS™

Citrus based

removal of acrylic

sealer, heavy

grease, and dirt.

ENVIRO-STRIP™

Softens and aids in

removal of mastic,

carpet, and VCT

adhesives.

GLUE REMOVE™

15% solids lithium

based concrete

densifier and

hardener.

LD 1800™

Additive for

slowing the cure of

concrete overlays

in hot weather.

RETARDER

Topical spray-on

membrane to slow

the evaporation of

moisture.

SURFACE DELAY

Repairs deep voids

in concrete from

1/8 inch - 4 inches

in thickness.

DEEP PATCH™

Cement based

bonding agent for

SureStamp and

Deep Patch.

SURE BOND™

55% solids polymer

concentrate used

to increase bond

strength.

SC POLYMER™

21

TRUTOPUltra smooth, high-strength, single coat micro-topping used to create a new organic canvas on floors, walls, and countertops.

TruTop is available in both white and gray cement bases.

VENETIAN PLASTERORGANIC FINISHTIGHT TROWEL

™

22

SURESPRAYThe most versatile self-bonding thin overlay. Designed to resurface and texture interior floors and exterior concrete

surfaces. Available in “ST” for hot weather climates.

EURO STONEWOOD GRAINTRAVERTINE

™

23

SURETEXBlended with a larger aggregate to allow for an ideal mix design for

the use in spray texture finishes, such as knockdown. Available in “ST” for hot weather climates.

KNOCKDOWNSTENCIL PATTERNS

WOOD GRAIN

™

24

SUREBROOMHigh compressive strength concrete overlay, formulated for heavy

traffic abrasion resistance, without compromising design or texture. Available in white and gray cement mix.

6,000+ PSIVEHICULAR TRAFFICCOMMERCIAL GRADE

™

25

SUREBONDCement based bonding agent that utilizes dry polymer technology

with fine aggregates to create a premium bond for thick build patches and stampable overlays. Use with Deep Patch and SureStamp.

BONDING AGENTCEMENT BASED

TINTABLE

™

26

SURESTAMPSingle component, just add water, stampable overlayment for the

replication of stamped concrete on existing interior or exterior concrete surfaces. Available in “ST” for hot weather climates.

ASHLAR SLATEOLD GRANITE

COBBLESTONE

™

27

WALLSPRAYLightweight, thin, sprayable overlay for use on vertical surfaces as

a stucco replacement. WallSpray can be used to create textures such as antique, sand finish, knockdown, and more.

RECYCLED MATERIALSTUCCO REPLACEMENT1/16 - 1/4 INCH THICK

™

28

WALLSTAMPLightweight, vertical, thick build overlay for use when

stamping or carving three-dimensional textures. WallStamp can be applied on exterior and interior walls.

STAMPABLECARVABLE

1/4 - 3 INCH THICK

™

29

SC TRUCOLORPremeasured UV-stable pigments for use with all of SureCrete’s concrete bag mixes for floors and walls.

Final color requires color enhancing sealer.

17MAPLEWOOD

18MINT

19NATURAL

WHITE

20OLD BRICK

21PUTTY

22REDWOOD

23SAND BUFF

24SILVER

01ALMOND

02ANTIQUE

WHITE

03BLUE FOG

04BROWNDERBY

05CARIBBEAN

CREAM

06CHARCOAL

07CHOCOLATE

08CONCRETE

GRAY

09CORAL

10DARK

WALNUT

11DESERTSAND

12DOVE GRAY

13GRAY

14GREENSLATE

15IVORY

16LIMESTONE

25SMOKE

26SPICE

27SUN BUFF

28TAUPE

29TERRACOTTA

30TILE RED

™

30

SURESTAINReactive, low-residue acid for use in staining concrete

and cement based overlays. SureStain creates a multi-hued, bright, mottled look.

EARTH TONE COLORSREACTIVE ACIDLOW-RESIDUE

BLACK HARVESTGOLD

JADE MISSIONBROWN

PACIFICBLUE

SPANISHGOLD

SPICENUT

TERRACOTTA

™

31

29TERRACOTTA

23SANDBUFF

24SILVER

25SMOKE

27SUN BUFF

28TAUPE

SHAKE-ONSTRONGER SURFACE

FLOATS IN FAST

TRUCASTColor hardener creates stronger concrete and allows for color

ranges that cannot be achieved easily through integral coloring. TruCast is a broadcastable dry pigment.

01ALMOND

02ANTIQUE

WHITE

04BROWNDERBY

10DARK

WALNUT

12DOVEGRAY

13GRAY

15IVORY

17MAPLEWOOD

20OLD

BRICK

21PUTTY

30TILE RED

™

32

TRUPOURPremeasured, high-quality pigments for the coloring of ready-mix concrete. Each single bag of TruPour has the ability to create three

shades of colors from a disintegrating bag packaging.

1 COLOR MAKES 3SYNTHETIC IRON OXIDES

READY-MIX COLOR

™

33

07CHOCOLATE

81GUN METAL

73CARAMEL

BUFF

85RED BARN

74CHESTNUT

91WATERMELON

BROADCASTABLEHYDROPHOBIC PIGMENT

POWDER RELEASE

TRUTIQUEColored release agent used to create a secondary color for stamped concrete surfaces. TruTique creates a barrier between the concrete

and the stamping tool for the highest quality finish.

03BLUE FOG

04BROWNDERBY

05CARIBBEAN

CREAM

06CHARCOAL

07CHOCOLATE

10DARK

WALNUT

13GRAY

17MAPLEWOOD

23SAND BUFF

27SUN BUFF

29TERRACOTTA

30TILE RED

™

34

17MAPLEWOOD

10DARK

WALNUT

06CHARCOAL

ECO ACCENTDry powder concrete antiquing agent, when mixed with

water, can be used to color wash existing stamped concrete, stamped overlay, and other textures in concrete surfaces.

WATER BASEDCOLOR WASHREJUVENATE

04BROWNDERBY

07CHOCOLATE

13GRAY

23SAND BUFF

24SILVER

29TERRACOTTA

30TILE RED

™

35

ECO STAINLiquid, semi-transparent, water-based concrete stain. Eco-Stain

comes concentrated and can be diluted up to 10:1 to create virtually any color stain desired.

™

36

UV-STABLENO NEUTRALIZINGCONCENTRATED

56KODIAK

29TERRACOTTA

40ARBORGREEN

41AUTUMN

GOLD

42AZTECGOLD

43BEECHNUT

44BERMUDA

BLUE

46BURNT

CRIMSON

47COOL

FOREST

55KAYAK

48DOMINO

49EPICBLUE

50ESPRESSO

51FIR GREEN

53GREENOLIVE

54HARVESTYELLOW

57MAGNET

58MIDNIGHT

BLUE

59NAVYBLUE

60OAK

61ORANGE

BLOSSOM

62PEWTER

63RUBY

64SAFARI

TAN

65SPANISH

RED

67THAI

GREEN

68TITANIUM

GRAY

69WALNUT

70WHITE

37

XS PRECASTPourable, high early strength concrete casting mix that can be used

to create textures such as solid color, veining, travertine, pressed, and sandstone. Available in white and gray cement bases.

10,000+ PSIWHITE & GRAY CEMENT

POURABLE

™

38

XS FACESprayable face coat for glass fiber reinforced concrete

system. The use of XS Backer mix is required to complete system. Available in white and gray cement bases.

GFRC FACE COATSPRAYABLE

WHITE & GRAY CEMENT

39

™

XS TERRAZZOAdd a variety of different decorative aggregate types, to create a high early strength concrete casting mix. Intense loading of up to

80 lbs. of aggregate per bag. See TDS for formulas.

POLISHABLEDEMOLD SAME DAYADD AGGREGATE

™

40

XS BACKERTake the guess work out of glass fiber concrete mix designs. XS Backer increases tensile and flexural strengths when used with XS PreCast or

XS Face. Available in white and gray cement bases.

AR GLASS FIBERWHITE & GRAY CEMENT

REINFORCEMENT

™

41

XS TRUCOLORPremium, pre-measured pigment for Xtreme Series and D-FRC bag mixes. XS TruColor provides a rich, bold, consistent color

palette for concrete casting in both white and gray cement bases.

31BIRCH

32CANYONSUNSET

33CAVERN

36+38EUCALYPTUS

34JET BLACK

35MORNINGCANOPY

36MOUNTAIN

SHADOW

37RIVER BED

38TWILIGHT

39WHITEWATER

STRONG COLORPURE OXIDE PIGMENT

VIBRANT

™

42

BROADCASTABLECEMENT BASED

NATURAL LOOKING

XS VEININGSpecially formulated dry color and cement blend for the

creation of pigmented veins in poured concrete castings.Can be used with Xtreme Series and D-FRC bag mixes.

03BLUE FOG

06CHARCOAL

07CHOCOLATE

11DESERTSAND

14GREENSLATE

17MAPLEWOOD

21PUTTY

22REDWOOD

23SAND BUFF

27SUN BUFF

™

13GRAY

43

XS-PC12Thin film high-gloss solvent based sealer for a polished sheen

without the equipment. XS PC12 is UV-stable, easy to apply, and enhances color. Available in high gloss only.

XS-327Our exclusive technology delivers the ultimate protection for high

performance concrete mixes. This sealer is penetrating, has minimal color enhancement, high heat resistance, is water based, and comes

in a semi-gloss or matte finish.

HIGH GLOSSCOLOR ENHANCING

DRIES FAST

WATER BASEDSEMI-GLOSS & MATTE

FOOD SAFE

™

™

44

XS MATRIX 1/8” 1/4” 3/8” 1/2” 3/4”

# of Bags Sq. Ft.

1” 1.5” 2”

Sq. Ft. Sq. Ft. Sq. Ft. Sq. Ft.Sq. Ft. Sq. Ft. Sq. Ft.

1 20 6.5 5 3.25 2.7540 13 10

2 40 13 10 6.5 5.580 26 20

3 60 39 15 19.5 8.25120 39 60

4 80 26 20 13 11160 52 40

5 100 32.5 25 16.25 13.75200 65 50

6 120 39 30 19.5 16.5240 78 60

7 140 45.5 35 22.75 19.25280 91 70

8 160 52 40 26 22320 104 80

9 180 58.5 0 29.25 24.75360 117 90

10 200 65 50 32.5 27.5400 130 100

11 220 71.5 55 35.75 30.25440 143 110

12 240 78 60 39 33480 156 120

13 260 84.5 65 42.25 35.75520 169 130

14 280 91 70 45.5 38.5560 182 140

15 300 97.5 75 48.75 41.25600 195 150

XS BAG MIX MATRIX

XS-327 SEALER DILUTION RATES

* See TDS for Application Methods

* All Dilution Rates Should be Practiced Before Final Application. 1:1

32%SOLIDS

2:121.3%

SOLIDS

4:112.8%

SOLIDS

• KITCHENS• BARS• SINKS• FLOOR TILES• WET AREAS• SHOWERS

• BATH VANITIES• HEARTHS• MANTLES• FLOORS

• WALL PANELS**** Acts more as a treatmentinstead of a sealer at this dilution rate.

3:116%

SOLIDS

5:110.7%

SOLIDS

6:19.1%

SOLIDS

7:18%

SOLIDS

Rolled Application* Rolled Application* Rolled or Burnished Application*

PROTECTION LEVEL (After 7:1 Prime Coat)

45

XS PACKINGAccelerator for thickening Xtreme Series and

D-FRC bag mixes to create pressed orsandstone textures.

XS SLURRYWhite cement slurry to fill in voids and

pinholes in Xtreme Series castings. Tintable via SC TruColor or XS TruColor.

™

™

46

FOAM FORMING SYSTEM

Expedite forming with precut foam rails.PSA and Clear Facing tape required.Available in 0.75”, 1”, 1.5”, and 2” profiles.

4 FOOT HIGH DENSITY FOAM RAILS

Each roll is 100 lft. long. When adhered to the foam rails iteliminates seams and texture from the foam for a smooth finish.Available in 0.75”, 1”, 1.5”, and 2” profiles.

CLEAR FACING TAPE

Double-sided 100 lft. pressure-sensitive adhesive that bonds the foam rail to the casting deck. This tape does not wick moisture and will not lose its grip when casting.

PSA TAPE

EDGE PROFILES

High strength and heat moldable, these edge profiles deliver a 1.5” profile. Designs include Ogee, Bullnose, Chamfer, and Eased Edge.

50 LINEAR FOOTMOLDABLE EDGE PROFILES

47

HS 200LVPremium 20% solids low VOC solvent-based acrylic sealer

formulated with attributes of slow-evaporating solvents, silane, and the highest quality blend of acrylic for optimal concrete protection.

400 G/L VOCCOLD CLIMATES

1 GALLON • 5 GALLON

HS 200Premium 20% solids solvent-based acrylic sealer formulated with

attributes of slow-evaporating solvents, silane, and the highest quality blend of acrylic for optimal concrete protection.

600 G/L VOCGREAT FOR RESEAL

1 GALLON • 5 GALLON

™

™

48

HS 300LV

400 G/L VOCFREEZE-THAW

5 GALLON • 55 GALLON

HS 300LVPremium 30% solids low VOC solvent based acrylic sealer designed to protect concrete overlays with attributes of slow-evaporating solvents, silane, and the highest quality blend of acrylic for optimal protection.

HS 300Premium 30% solids solvent-based acrylic sealer designed to protect concrete overlays with attributes of slow-evaporating solvents, silane,

and the highest quality blend of acrylic for optimal protection.

600 G/L VOCPROTECT OVERLAYS

5 GALLON • 55 GALLON

™

™

49

SUPER WBEnvironmentally VOC friendly, water-based clear acrylic sealer

with 30% solids used outdoors to protect patios and pool decks. Available in Gloss and Low Luster finishes.

50 G/L VOCCOLOR ENHANCING

1 GALLON • 5 GALLON

SUPER 30Solvent-based, clear acrylic sealer with 30% solids used to seal and protect exterior concrete surfaces in states that can utilize

600 g/L solvents.

600 G/L VOCCOLOR ENHANCING

5 GALLON • 55 GALLON

™

™

50

CS 250

CS 25025% solid styrenated acrylic, solvent-based finishing membrane

designed to strengthen freshly poured concrete by managing the cure while also sealing it to protect the surface.

SUPER 20Solvent-based clear acrylic sealer with 20% solids used to

seal and reseal decorative concrete surfaces in states that can utilize 600 g/L solvents.

600 G/L VOCCOLOR ENHANCING

1 GALLON • 5 GALLON

CURE & SEALREDUCE SHRINKAGENON-DISSIPATING

™

™

51

CS 125LV12.5% solid, low VOC, styrenated, acrylic, solvent-based

finishing membrane designed to strengthen freshly poured concrete by managing the cure and reducing shrinkage.

400 G/LNON-DISSIPATING

LOW SOLIDS

CS 250LVLow Voc 25% solid, styrenated, acrylic, solvent-based finishing membrane designed to strengthen freshly poured concrete by

managing the cure and sealing it to protect the surface.

400 G/LNON-DISSIPATING

CURE & SEAL

™

™

52

SELECT THERIGHT COATING

Polyurethane? Polyaspartic? Epoxy?The chart below will showcase product attributes to aid you in selecting the right coating.

On projects were vapor transmission is present, the use of DK 700 is advised,see page 54 for details.

PRODUCTNAME

PRODUCTTYPE

%SOLIDS

BASETYPE

VOC AROMA MOISTURECURE

HIGHGLOSS

GLOSS SATINUV

STABILITY

DK 120

DK 180

DK 400

DK 400WB

DK 600WB

DK 500 E

DK 500 P

DK 500 PTV

Polyaspartic

Polyaspartic

Polyurethane

Polyurethane

Epoxy

100%Solids Epoxy

100%Solids Epoxy

100%Solids Epoxy

67%

80%

51%

57%

85%

100%

100%

100%

Solvent

Solvent

Solvent

Water

Water

Solvent

Solvent

Solvent

330

150

375

73

175

0

0

0

Mild

Strong

Strong

Zero

Mild

Minimal

Minimal

Minimal

X

X

X

X

X

X

X

X

X

RECOATTIME

HEAVYTRAFFICREADY

PAGENUMBER

X

Great

Great

Excellent

Excellent

Fair

Poor

Good

Good

2-3 Hours

4-6 Hours

6-8 Hours

8-10* Hours

8-10 Hours

7-9 Hours

7-9 Hours

7-9 Hours

24-36 Hours

24Hours

72Hours

72*Hours

24Hours

24*Hours

24*Hours

24*Hours

57

57

56

55

61

58-59

58-59

58-59

*Environmental conditions can cause the recoat time to vary up to 48 hours. See TDS for instructions.UV Stability Rating Highest to Lowest = Excellent - Great - Fair - PoorE - P - PTV denotes the curing agent used with the Part A of DK 500. See page 59.

SHEEN

53

VAPOR BARRIERUSE WITH DK & COLORTEC

EASY ROLLOUT

DK 700Eliminate unwanted bubbles and pinholes by stopping the moisture vapor transmission from the concrete. DK 700 is a Class 1 moisture

mitigation system that creates a topical vapor barrier.

™

54

DK 400WBWater-based, 57% solids, dual-component polyurethane clear coating. Excellent UV stability, flexibility, chemical and scratch resistance, with

easy recoat properties. Available in gloss and satin sheens.

72 G/L VOC1 GALLON KIT • 4 GALLON KIT

MINIMAL AROMA

™

55

DK 400Dual-component clear solvent-based polyurethane with 51% solids. DK 400 is high-gloss, non-yellowing, delivers superb

chemical and scratch resistance, and will enhance colors.

CHEMICAL RESISTANCE1 GALLON KIT • 5 GALLON KIT

HIGH GLOSS

™

56

DK 180

DK 18080% solids, solvent based, dual-component, polyaspartic clear

coating. DK 180 can provide a one-coat application when applied to a surface that has no absorption, such as a DK Flake System.

HIGH GLOSSRECOAT IN 4-6 HRS.

THICK BUILD

DK 12067% solids, solvent-based, dual-component, thin film, polyaspartic

clear coating. Superior gloss finish, color enhancing, fast recoat and cure times for projects on tight schedules.

THIN FILMRECOAT IN 2-3 HRS.

HIGH GLOSS

™

™

57

DK 500Solvent-based, 100% solids, thick build, clear epoxy.

Choose one of the three Part-B’s to introduce specific attributes to your project. The most popular coating for the DK Metallic pigments.

100% SOLIDSPREMIUM RESINSSELF-LEVELING

™

58

PART B OPTIONS

DK 500PART B OPTIONS

Economy aliphatic amine hardener that delivers a cost-effective clear coat.

Susceptible to blushing and yellowing over time.

Premium cycloaliphatic amine hardener increases resistance to impact and

chemicals. Will slow blushing, water spotting,

and yellowing.

Premium Thin Viscosity cycloaliphatic amine

hardener has all the high performance attributes of

the “P” with a more flowable consistency for DK Metallic.

E P PTV

™

59

SUREFINISHMop-on coating to enhance sheen and hide wear.SureFinish is available in a gloss and matte finish.

GLOSS & MATTE1 GALLON • 5 GALLON

™

60

NON-SLIP ADDITIVES

Polypropylene 300

micron/ 50 mesh

for acrylic sealers.

SUREGRIPADDITIVE™

Polypropylene 840

micron/ 50 mesh

for acrylic sealers.

SUREGRIPHD ADDITIVE™

Aluminum oxide

for use with acrylic

sealers and

coatings.

SUREGRIPBROADCAST™

EPOXY PRIMER

SEALER & COATING GLOSS REDUCTION

85% solids, water-based, dual-component, clear

epoxy. DK 600WB can handle a high tolerance of vapor

transmission, when used as a primer.

DK 600WB™

Dry powder additive for specific sealers

and coatings to reduce sheen. Used in:

SC MATTINGAGENT™

• HS 200

• HS 200LV

• HS 300

• HS 300LV

• SUPER 20

• SUPER 30

• DK 400

61

DK METALLICMetallic, pearlescent, dry pigment powder designed to be mixed into a DK coating. The most popular, DK

500PTV, creates a three-dimensional finish.

20 COLORSMIX & MATCH3-D FINISH BURNT

ORANGE

PEWTER TOFFEE COPPER CHARCOAL CHAMPAGNE

PEARL ONYX MIDNIGHTBLUE

MAHOGANY GUN METAL

DARKCHERRY

WINERED

SLATE SEQUOIA ROYAL BLUE

BRONZE BRASS BLONDE BARKBROWN

™

62

ASPHALT(Silver Base)

COSMOS(Silver Base)

GRAVEL(Dove Gray Base)

BUCKSKIN(Antique White Base)

CHIMNEY(White Base)

NEVADA(Dove Gray Base)

PRARIE(Antique White Base)

SIERRA(Antique White Base)

SMOKE(Dove Gray Base)

DURANGO(Antique White Base)

SAVANNAH(White Base)

DK FLAKEMulti-colored, preblended, polymer chip flakes to be

broadcasted into ColorTec coatings. For one-day floors, use ColorTec 180.

PRE-BLENDED25 LB. BAGS

WRANGLER(Dove Gray Base)

™

63

Solvent-based,

30% solid, 600g/L

acrylic sealer for

exterior concrete

surfaces. Two tint

bases can create

over 200 colors,

making exterior

theming easier

than ever before.

COLORTECACRYLIC

Low VOC

solvent-based

30% solid, 400g/L

acrylic sealer for

exterior concrete

surfaces. Two tint

bases can create

over 200 colors,

making exterior

theming easier

than ever before.

COLORTECACRYLIC LV

Eco-friendly,

water-based,

30% solid, 50 g/L

acrylic sealer for

exterior concrete

surfaces. Two tint

bases can create

over 200 colors,

making exterior

theming easier

than ever before.

COLORTEC ACRYLIC WB

COLORTEC ACRYLICOPTIONS

™

64

COLORTEC 600WB

ECONOMICALDK METALLIC PRIMER

WAREHOUSING

COLORTEC 600WBPigmented, dual-component, water-based epoxy. Used for DK Flake system and as the colored basecoat for metallic flooring.

Two tint bases can create over 200 colors.

COLORTEC 400WBPigmented, water-based polyurethane that is dual component and

low VOC. Ideally suited for high traffic commercial and manufacturing settings due to its high chemical resistance. Two tint bases

can create over 200 colors.

UV-STABLEINDUSTRIAL USEHIGH-DURABILITY

™

™

65

COLORTEC 180Pigmented, two-component, solvent-based polyaspartic. Fast cure times make this ideal for one-day flooring systems. Two tint bases

can create over 200 colors.

ONE-DAY FLOORINGTHICK BUILDFAST DRYING

COLORTEC 400Pigmented, two-component, solvent-based polyurethane. Ideally

suited for high traffic in commercial settings, such as manufacturing facilities. Two tint bases can create over 200 colors.

UV-STABLEHIGH GLOSS

FORK LIFT TRAFFIC

™

™

66

COLORTEC 500Solvent-based, 100% solids, thick build, pigmented epoxy.

Choose one of the three Part-B’s to introduce specificattributes to your project.

100% SOLIDSSELF-LEVELING

INCREASE BRIGHTNESS

™

67

Economy aliphatic amine hardener that delivers a cost-effective clear coat.

Susceptible to blushing and yellowing over time.

Premium cycloaliphatic amine hardener increases resistance to impact and

chemicals. Will slower blushing, water spotting,

and yellowing.

Premium Thin Viscosity cycloaliphatic amine

hardener has all the high performance attributes of

the “P” with a more flowable consistency for DK Metallic.

E P PTV

COLORTEC 500PART B OPTIONS

™

68

1.352.567.797315246 CITRUS COUNTRY DR.

DADE CITY, FL 33523 USA

WWW.SURECRETEDESIGN.COM