decorative soap hoop dispenser covers · know, has been contacted to buy, sell, trade, or copy our...

6
Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law. The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved. Embroidery Club Feature Collection Decorative Soap Dispenser Covers Decorative Soap Dispenser Covers IN the HOOP Soap Dispenser Instructions Note: The Soap Dispenser Covers are designed for use on a common soap dispenser bottle size. The dimensions are: 5” to 6” tall, and a bottle diameter of 3” or a 9” circumference. Items you will need: Cut away stabilizer 11½” X 9½” piece of fabric 1/8” Elastic Tape Optional: Buttons or ribbon to accent the front of the dispenser. Note: The 11½” length will be the top and bottom of the fabric piece. 1. Fold the bottom of the fabric ½” to the inside and press. Fold ½” in again and press--This will be the bottom hem. Fold the top of the fabric 1 1/8” to the inside and press--This will be the pocket for the elastic. 2. Cut the fabric in half, 5¾” from the side. This will be your front and back. Back of soap dispenser needs to be embroidered first USE design number NFC0209 to create back of soap dispenser cover. 3. Hoop one piece of the stabilizer (if the stabilizer is light, you may need two pieces). Embroider the first color change of NFC0209—the outline stitches, which will be the guide for fabric placement.

Upload: others

Post on 26-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

Soap Dispenser Instructions

Note: The Soap Dispenser Covers are designed for use on a common soap dispenser bottle size. The dimensions are: 5” to 6” tall, and a bottle diameter of 3” or a 9” circumference.

Items you will need:

Cut away stabilizer11½” X 9½” piece of fabric 1/8” ElasticTapeOptional: Buttons or ribbon to accent the front of the dispenser.

Note: The 11½” length will be the top and bottom of the fabric piece.

1. Fold the bottom of the fabric ½” to the inside and press. Fold ½” in again and press--This will be the bottom hem. Fold the top of the fabric 1 1/8” to the inside and press--This will be the pocket for the elastic.

2. Cut the fabric in half, 5¾” from the side. This will be your front and back.

Back of soap dispenser needs to be embroidered first

USE design number NFC0209 to create back of soap dispenser cover.

3. Hoop one piece of the stabilizer (if the stabilizer is light, you may need two pieces). Embroider the first color change of NFC0209—the outline stitches, which will be the guide for fabric placement.

Page 2: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

4. Lay the fabric inside the outline stitches with the top of the fabric up.

5. Tape in place.

6. Stitch the second color change-- the tack down stitches, will hold the fabric in place, and the satin stitches will create the pocket for the elastic. Use a coordinating thread.

7. Remove the tape.

8. Remove from hoop.

9. Trim the stabilizer close to the fabric. Set aside.

Front of soap dispenser.

Select design of your choice (i.e. Honey Pot Soap Dispenser is NFC0189)

10. Hoop one piece of stabilizer (if the stabilizer is light, you may need two pieces).

11. Embroider the first color change-- the outline stitches, which will be the guide for fabric placement.

Page 3: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

12. Lay the fabric inside the outline stitches with top of the fabric up.

13. Tape in place.

14. Stitch the second color change -- the tack down stitches, will hold the fabric in place, and the satin stitches will create the pocket for the elastic. Use a coordinating thread

15. Remove the tape.

16. Continue embroidering the design following the color changes, leaving the last color change for adding the back piece of the soap dispenser.

17. Lay the back piece of the soap dispenser (that was set aside in step 9) with the embroidered side down. Make sure the pocket for the elastic is facing the same direction as the hooped front piece and the side seams match up.

18. Tape in place.

Page 4: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

19. Embroider the last color change-- this will be the side seams of the soap dispenser.

20. Remove the tape.

21. Remove from hoop.

22. Trim the fabric close to the side seams.

23. Snip the fabric on the inside close to the side seams on the front and back in the elastic pocket.

24. Run elastic through the pockets.

25. Stitch or tie the elastic.

Page 5: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

26. Turn the soap dispenser right side out.

27. Add an accent to the front of the dispenser on the gathered pocket if desired.

Page 6: Decorative Soap HOOP Dispenser Covers · know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles. Legal Notice: Making

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2011 Dakota Collectibles. All Rights Reserved.

Embroidery ClubFeature Collection

Decorative Soap Dispenser CoversDecorative Soap Dispenser Covers

IN theHOOP

STOCK EMBROIDERY DESIGN SOFTWARE LICENSE

1. LICENSE: The design software is licensed to the original customer for embroidery use at one location. The use of the software at more than one location is a violation of copyright law.

2. COPYRIGHTS: The stock embroidery designs, the software, and the catalog are owned and copyrighted by Dakota Collectibles and are protected by United States copyright laws and international treaties. You may not copy the software except: a) you may make one copy of the software for back-up or archival purposes; and b) you may transfer the software onto a hard disk provided you keep the original solely for back-up or archival purposes. You may not copy the catalog, flyers, or other printed materials which accompany the software.

3. OTHER RESTRICTIONS: You may not rent, lease, or share the software. You may permanently transfer the software provided that you transfer this license and the software together; do not retain any copies of the software; and therecipient agrees to the terms of this license. If the software is sold or otherwise transferred, the parties agree to provide Dakota Collectibles with the recipient’s name, business name, address, telephone number, and a list of the software involved with the transfer.

4. WARRANTY DISCLAIMER: Dakota Collectibles’ liability and your exclusive remedy for a defective product shall be either: a) replacement of defective software; or b) a return of the purchase price paid for the returned software.

5. LIMITATION OF DAMAGES: IN NO EVENT SHALL DAKOTA COLLECTIBLES BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES (INCLUDING BUSINESS INTERRUPTION, LOSS OF PROFITS, ETC.) ARISING OUT OF THE USE OR LOSS OF USE OF THE SOFTWARE, EVEN IF DAKOTA COLLECTIBLES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion of this liability, so this limitation may not apply to you.

6. REPRODUCTION AND SALE OF EMBROIDERED GOODS: This license allows you to sew the designs on fabric or other material. You may then sell, trade, or give away the embroidered goods which have the designs on them.

© COPYRIGHT NOTICE: Dakota Collectibles copyrights its artwork. The copyrights cover all of the embroidery designs as displayed in its catalogs, flyers, home embroidery collections, all promotional advertising, and the design software which reproduces those designs. The copyrights protect your best interests as well as ours. Dakota Collectibles is prosecuting copyright infringements to the fullest extent of the law. You cannot legally copy, by any means, such as, for example, scanning, photocopies, or electronic transfer, Dakota Collectibles’ artwork or design software. The design software you obtain is licensed for customer use at one location. Buying, selling, trading, or copying our artwork or design software is a violation of copyright law. Preventing the illegal copying of our designs and design software will help bring new and creative designs to you. If you, or anyone you know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles.Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law. The design software is licensed to the original customer for embroidery use at one location.

©2011 Dakota CollectiblesAll Rights Reserved

Software License and Contact InformationCall our Toll-Free Order Line...

1 800-331-3160Monday through Friday, 8 a.m. - 5 p.m. CTor call 701-255-2409

Fax your order to our Toll-Free Fax Line...

1 888-325-265524 hours a day, 7 days a weekor FAX to 701-255-7207

Designs in Home Formats are available at...

www.gonutsgocreative.com24 hours a day, 7 days a week

E-mail your order to...

[email protected] hours a day, 7 days a weekE-mails will be responded to Monday through Friday, 8 a.m. - 5 p.m. CT

Send your order to...

Dakota Collectibles2000 Schafer St.Bismarck, ND 58501