deep well submersible pumps by hallmakr industries inchp volt amp flow gpm 0 5.3 8.8 14.1 17.6 24.7...
TRANSCRIPT
HALLMARK INDUSTRIES INC. PUMP DIMENSIONS (inch [mm])
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
MA0343X-4 MA0343X-4A MA0414X-7 MA0414X-7A MA0460X-9 MA0460X-9A MA0419X-12A MA0431X-18A MA0459X-14 MA0459X-14A
SS series SS.MA0343X SS.MA0343X SS.MA0414X SS.MA0414X SS.MA0460X SS.MA0460X SS.MA0419X SS.MA0431X SS.MA0459X SS.MA0459X
D MAX 4 4 3.8 3.8 3.8 3.8 3.8 4 3.3 3.3
NPT 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1 1
C (inch) 13.74 13.74 16.65 16.65 17.72 17.72 23.86 28.86 21.26 21.26
B (inch) 15.59 15.59 17.32 17.32 17.32 17.32 21.14 22.24 17.05 17.05
A (inch) 25.83 25.83 32.09 32.09 33.15 33.15 44.65 49.21 36.89 36.89
Deep Well Submersible Pumps by
HALLMAKR INDUSTRIES INC
Pump series MA
0343X series
MA 0414X series
MA 0419X series
MA 0431X series
MA 0459X series
MA 0460X series
Pump series SSMA 0343X series
SSMA 0414X series
SSMA 0419X series
SSMA 0431X series
SSMA 0459X series
SSMA 0460X series
Pump's Max rated Head
150 (ft)
207 (ft)
400 (ft)
625 (ft)
247 (ft)
240 (ft)
Max pumping level for 20/40
psi setting
55 (ft)
114 (ft)
307 (ft)
530 (ft)
154 (ft)
147 (ft)
Max pumping level for 30/50
psi setting
33 (ft)
91 (ft)
284 (ft)
508 (ft)
131 (ft)
124 (ft)
Max pumping level for 40/60
psi setting 9 (ft)
68 (ft)
261 (ft)
486 (ft)
108 (ft)
101
(ft)
Fits min well casing ID
(inch) 5 5 4 5 4 4
Performance and sizing chart
Part # Power Flow M3/H 0 1 2 2.6 3.2 3.6 4.2 4.5 Weight
HP Volt Flow (GPM) 0 4.6 9.1 11.5 14 16 18.4 20 (lbs) Amp
MA0343X-4 SS.MA0343X-4-115
1/2 115 Head (ft) 154 142 120 103 80 56 27 5 26 6.5
MA0343X-4A SS.MA0343X-4A-230
1/2 230 Head (ft) 154 142 120 103 80 56 27 5 26 3.3
A B C D E MAX
26” 15.6” 13.7 1-1/4 NPT
3.86” 4.0”
Features & Technical Specifications:
• 4" deep well submersible pump, 150 feet max head. For 5” or larger well casing.
• Patented impeller provides heavy duty high flow: 25 GPM. That is greater than almost all other 1/2 HP well pumps.
• Water temperature: (32 ~113oF)
• Trans medium’s Ph: 6.5~ 8.5
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Built in capacitor start, and thermal protection for longer life and powerful start.
• Built in control box. This pump DOES NOT require an external control box!
• This pump uses high quality UL approved motor, UL file No.: E233961
• This is a 2 wire pump with 3-Wire (2 wires + ground wire)
• 10' long electric cord comes with this submersible deep well pump.
• 1¼” NPT discharge
• Designed to fit inside 5" ID or larger pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent overheating
• Submersible design eliminates the need for priming and creates quiet operation
4” Deep Well Submersible Pump (for 5” well casing) Performance chart
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part # Power Flow M3/H 0 1.2 2 3.2 4 5.6 6.4 7.4 Weight
HP Volt Flow GPM 0 5.3 8.8 14.1 17.6 24.7 28.2 32 (lbs) Amp
MA0414X-7 SS.MA0414X-7-115
1 115 H (ft) 207 195 184 161 138 82 52 11 30 10.2
MA0414X-7A SS.MA0414X-7A-230
1 230 H (ft) 207 195 184 161 138 82 52 11 30 5.1
4” Deep Well Submersible Pump Performance chart
Features & Technical Specifications:
• 3.7" deep well submersible pump, 8 stage, 207 feet max head.
• Fits 4” ID or larger well casing.
• Patented impeller provides heavy duty high flow: 33 GPM. That is greater than almost all other 1 HP well pumps.
• Water temperature: (32 ~113oF)
• Trans medium’s Ph: 6.5~ 8.5
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Built in capacitor start, and thermal protection for longer life and powerful start.
• Built in control box. This pump DOES NOT require an external control box!
• This pump uses high quality UL approved motor, UL file No.: E233961
• This is a 2 wire pump with 3-Wire (2 wires + ground wire)
• 10' long electric cord comes with this submersible deep well pump.
• 1¼” NPT discharge
• Designed to fit inside 4" ID or larger pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent over-heating
• Submersible design eliminates the need for priming and creates quiet operation
A B C D E MAX
32.1” 17.3” 16.7 1-1/4 NPT
3.5” 3.7”
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part # Power Flow M3/H 0 2 3.2 4.27 5.26 6.11 7.2 7.74 Weight
HP Volt Flow GPM 0 8.8 14.1 18.8 23.2 27 32 34.1 (lbs) Amp
MA0419X-12A-E SS.MA0419X-12AEXT-230
2 230 H (ft) 400 369 330 288 232 171 77 5 39 10.2
MA0419X-12A SS.MA0419X-12A-230
2 230 H (ft) 400 369 330 288 232 171 77 5 41 10.2
Features & Technical Specifications:
• 3.8" deep well submersible pump, 14 stage, 400 feet Max head
• Fits 4” ID or larger well casing.
• Patented impeller provides heavy duty high flow: 35 GPM. That is greater than al-most all other 2 HP well pumps.
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Capacitor start motor, and thermal protection for longer life and powerful start.
• MA0419X-12A and SS.MA0419X-12A-230 have a built in control box. This is a 2 wire pump with ground (2 wires + ground wire)
• MA0419X-12A-E and SS.MA0419X-12AEXT-230 have a control box. This is a 3 wire pump with ground (3 wires + ground wire)
• This pump uses high quality UL approved motor, UL file No.: E233961
• 10' long electric cord comes with this submersible deep well pump.
• 1¼” NPT discharge
• Designed to fit inside 4" ID or larger pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent over-heating
• Submersible design eliminates the need for priming and creates quiet operation
A B C D E MAX
44.7” 21.1” 24” 1-1/4 NPT
3.5” 3.8”
4” Deep Well Submersible Pump Performance chart
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part # Power Flow M3/H 0 2 3.5 4.27 5.26 6.11 7.2 7.74 Weight
HP Volt Amp Flow GPM 0 8.8 14.1 18.8 23.2 27 32 34.1 (lbs)
MA0431X-18A-E SS.MA0431X-18AEXT
3 230 17 H (ft) 625 550 480 420 340 220 42 5 54
Features & Technical Specifications:
• 4" deep well submersible pump, 18 - 20 stage, 625 feet Max head (open tank)
• Patented impeller provides heavy duty high flow: 35 GPM. That is greater than al-most all other 3 HP well pumps.
• Water temperature: (32 ~113oF)
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Capacitor start motor, and thermal protection for longer life and powerful start.
• With a built in check valve!
• Comes with an external control box.
• This pump uses high quality UL approved motor, UL file No.: E233961
• This is a 3 wire pump with 4-Wire (3 wires + ground wire)
• 10' long electric cord comes with this submersible deep well pump.
• 1¼” NPT discharge
• Designed to fit inside 5" ID or larger pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent over-heating
• Submersible design eliminates the need for priming and creates quiet operation
A B C D E MAX
49.2” 22.2” 28.9” 1-1/4 NPT
3.9” 4.0”
4” Deep Well Submersible Pump Performance chart
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part # Power Weight Capacitor: 20µF/450V (MA0459X-14A); 55µF/250V (MA0459X-14)
HP Volt Amp Flow GPM 0.3 2.1 4.4 7.1 9.8 11.8 13.5 16.5 (lbs)
MA0459X-14 SS.MA0459X-14-115
3/4 115 9.2 Head (ft) 272 262 253 230 199 150 105 3.94 24
MA0459X-14A SS.MA0459X-14A-230
3/4 230 4.6 Head (ft) 272 262 253 230 199 150 105 3.94 24
3.3” Deep Well Submersible Pump Performance chart
Features & Technical Specifications:
• 3.3" deep well submersible pump, 14 stage, 247 feet max head (open tank).
• Patented impeller provides heavy duty high flow: max 17 gpm, and rated 10 gpm.
• Water temperature: (32 ~113oF); Trans medium’s Ph: 6.5~ 8.5
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Built in capacitor start, and thermal protection for longer life and powerful start.
• Built in control box. This pump DOES NOT require an external control box!
• This pump uses high quality UL approved motor, UL file No.: E233961
• This is a 2 wire pump.
• 10' long electric cord comes with this submersible deep well pump.
• Built in check valve. 1” NPT discharge
• Designed to fit inside 4" ID pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent over-heating
• Submersible design eliminates the need for priming and creates quiet operation
A B C D E MAX
37” 17” 21.3” 1” NPT 2.9” 3.3”
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part #
Power Weight Capacitor: 70µF/250V (MA0460X-9); 30µF/450V (MA0460X-9A)
HP Volt Amp Flow GPM 0 4.6 8.8 17.5 20.2 22.3 24.2 25.5 (lbs)
MA0460X-9 SS.MA0460X-9-115
1 115 12 Head (ft)
247 234 227 150 91 79 49 24 28
MA0460X-9A SS.MA0460X-9A-230
1 230 5.8 Head (ft)
247 234 227 150 91 79 49 24 28
3.5” Deep Well Submersible Pump Performance chart
Features & Technical Specifications:
• 3.8" deep well submersible pump, 9 stage, 240 feet max head (open tank).
• Patented impeller provides high flow: 25GPM (max), 13 GPM (rated).
• Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5
• Solid stainless steel body with heavy duty cast iron or stainless discharge
• Industrial grade heavy duty, also good for home usage
• Built in capacitor start, and thermal protection for longer life and powerful start.
• Built in control box. This pump DOES NOT require an external control box!
• This pump uses high quality UL approved motor, UL file No.: E233961
• This is a 2 wire pump with 3-Wire (2 wires + ground wire)
• 10' long electric cord comes with this submersible deep well pump.
• 1¼” NPT discharge. No check valve for easy winterization.
• Designed to fit inside 4" ID or larger pipe/well casing
• Heavy-duty thermoplastic impellers, diffusers, and intake screen.
• High efficiency, hermetically sealed motor is thermally protected to prevent overheating
A B C D E MAX
33.2” 17.3” 17.7” 1.25” NPT
3.5” 3.8”
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
Part # Power Weight
HP (pre-set) Volt (lbs)
SP0456X-4A 1/2 230 6
SP0456X-7A 1 230 6
SP0456X-12A 2 230 6
Pump Protectors for Deep Well Submersible Pumps
Features & Technical Specifications:
• Pump controller is a smart protector, for 230V deep well pump with built-in control box (internal capacitor);
• Protectors are pre-set for Hallmark Industries pumps, and can be adjusted for different horsepower;
• Shuts off pump automatically to protect the pump when wa-ter is low, or when current is too high;
• Comes with water 3 level sensors, manual, installation kit for accurate pump control and protection;
• Installing water level sensors is optional;
• Easy to wire with the included wiring diagram;
• This smart device is an efficient way to protect and extend water pump life.
411 E. North Ave, Streamwood, IL 60107, USA • Ph: 847-301-8050 • Toll free 888-863-6623 • www.hallmarkind.com
AAALLLLLLMMMAAARRRKKK IIINNNDDDUUUSSSTTTRRRIIIEEESSS,,, IIINNNCCC... 624 Estes Ave, Schaumburg, IL 60193, U.S.A.
Tel: 847-301-8050 Fax: 847-301-8839
Email: [email protected] Website: www.hallmarkind.com
TM HHH
PUMP SELECTION GUIDE (MUST READ!)
Never select a pump based on the horse power (HP)! Many brands mark down their HP to falsely claim that
their pumps use less electricity. It is common in the pump industry. So your old 1/2HP pump may actually be a
1HP pump. We do not mark down our pumps’ HP. But Amps won’t lie. Compare the Amps, NOT HP!
If a pump has max 150’ head & 25 gpm, its gpm is not always 25! Gpm reduces with the increase of pumping
level, from max 25 gpm (@0’ head) and reduces to 0 gpm (@150’ head). Read the flow curve! 150’ head is to
an open water tank with no back pressure! A pressure tank will reduce the pump’s head significantly. 1 psi
setting in the pressure tank equals 2.307’ of head. We use our 1/2HP (max head 150’) for 2 cases below.
Case 1: To determine its flow at water level 20’, 20/40 psi pressure switch setting:
The min total head (@20 psi) = 20’ + 20x 2.307 = 66’
The max total head (@40 psi) = 20’ + 40x 2.307 = 112.3’
Read the flow chart for MA0343X-4 (MA0343X-4A). The flow at 66’ is about 15 gpm, at 115’ is about 10 gpm.
So the pump will start at 15 gpm (@ 20 psi on) and lower to 10 gpm (@40 psi off). In this case, the head used is
not 20’, and flow is not 19 gpm (@ 20’).
Case 2: To decide the max pumping level (1/2HP) to a pressure tank, 30/50 psi setting (@50 psi):
150 – 50 X 2.307 = 34.65 (feet)
So the water level should be less than 34 feet in order for this pump to get 50 psi in the pressure tank. If the
water level is deeper than 34 feet (i.e. 38 feet), you will not get 50 psi. Fittings, and elbows etc will add
resistance to the water head, and reduce the psi. Here is the chart for the pumping levels vs. psi settings.
Our Pump's
true HP 1/2HP 1HP 2HP
Pump's Max
rated Head
150
(feet)
207
(feet)
400
(feet)
Max pumping
level for 20/40
psi setting
43
(feet)
112
(feet)
300
(feet)
Max pumping
level for 30/50
psi setting
24
(feet)
89
(feet)
280
(feet)
Max pumping
level for 40/60
psi setting
5
(feet)
66
(feet)
260
(feet)
Selection chart for
pressure tank application HALLMARK IN
DUSTRIES IN
C.