defining programs, specifications, fault-tolerance, etc

30
Defining Programs, Specifications, fault- tolerance, etc.

Upload: mavis

Post on 07-Jan-2016

8 views

Category:

Documents


0 download

DESCRIPTION

Defining Programs, Specifications, fault-tolerance, etc. Recall. Program State space Program computation Of the form Specification consists of a set of infinite sequences of states. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Defining Programs, Specifications, fault-tolerance, etc

Defining Programs, Specifications, fault-tolerance,

etc.

Page 2: Defining Programs, Specifications, fault-tolerance, etc

Recall

• Program – State space

• Program computation– Of the form

<s0, s1, s2, …>

• Specification consists of a set of infinite sequences of states

Page 3: Defining Programs, Specifications, fault-tolerance, etc

• It turns out that the specification considered here are general. Often specifications in practice have some additional characteristics

Page 4: Defining Programs, Specifications, fault-tolerance, etc

Fusion closure

• A spec is fusion closed for any finite sequences , and infinite sequences , and state x, the following condition is satisfied– if xspec xspec– Then xspec xspec

Page 5: Defining Programs, Specifications, fault-tolerance, etc

Suffix Closure

• A spec is suffix closed for any finite sequence and infinite sequence – if spec – Then spec

• For subsequent discussion, we will assume that specification is suffix closed & fusion closed

Page 6: Defining Programs, Specifications, fault-tolerance, etc

Safety Specification

: SafetySpec : ( : is a prefix of :: SafetySpec)

• Safety specification can be modeled in terms of the set of `bad prefixes’ – Intuition: Consider a computation that

violates safety. Identify the prefix . – Do this for each computation that violates safety– Collection of these prefixes can be used to model safety

Page 7: Defining Programs, Specifications, fault-tolerance, etc

Safety Specification

• While the safety specification we considered is general, often more concise specifications suffice– Example 1: safety modeled as a set of bad

states• E.g., the value of x should never be greater than 3

– How can such a safety specification be modeled as a set of bad prefixes?

Page 8: Defining Programs, Specifications, fault-tolerance, etc

Safety Specification

• Example 2:– Safety is modeled as a set of bad transitions

• E,g., the value of x should never increase

• We will use this representation for subsequent work– More compact– General enough for many applications– If specification is fusion closed and suffix closed then

safety can always be represented as a set of bad transitions

Page 9: Defining Programs, Specifications, fault-tolerance, etc

State Predicate

• State Space Sp identifies the set of all states of a program– A state predicate is a subset of the state space

• For example, consider a program with one variable x, say with domain 0..10– x > 5 is an example of state predicate– Corresponds to {6, 7, 8, 9, 10}

Page 10: Defining Programs, Specifications, fault-tolerance, etc

More concise program representation

• A program is modeled in terms of a set of variables and a set of guarded commands– The domain of variables can be used to

determine state space– Each guarded command is of the form

• guard statement– guard is a Boolean variable over program variables

– I.e., guard is a state predicate

– Statement updates program variables

Page 11: Defining Programs, Specifications, fault-tolerance, etc

Example

• Consider Peterson’s mutual exclusion example– Variables

• st1, st2 : {n, t, c}

• turn : {0, 1}

Page 12: Defining Programs, Specifications, fault-tolerance, etc

Example

• Climate control system– Variables

• dt, pt : {60 .. 90}

• sync : {0, 1}

– Action (example)• dt > 60 sync = 0 dt = dt – 1;

Page 13: Defining Programs, Specifications, fault-tolerance, etc

Program Computation

• A sequence <s0, s1, … > is a computation of program p iff for each si, i > 0,

– si is obtained by executing some action of p that is enabled in si –1

• An action is enabled in a state iff its guard evaluates to true in that state

Page 14: Defining Programs, Specifications, fault-tolerance, etc

Fairness

• Sometimes, we also introduce a fairness condition– A sequence <s0, s1, … > is a computation of

program p iff for each si, i > 0,

• si is obtained by executing some action of p that is enabled in si –1

• If an action of p is continuously enabled in this sequence then it will be eventually executed

Page 15: Defining Programs, Specifications, fault-tolerance, etc

Closure

• We say that a predicate S is closed in program p iff– Starting from any state where S is true

execution of any enabled action results in a state in S

• Note that S is closed in p iff (p satisfies closed(S) from all states)

Page 16: Defining Programs, Specifications, fault-tolerance, etc

Program Correctness

• Typically,– A program is correct if all its computations

starting from initial state are in the specification

• What if we want to talk about correctness of programs when we start observing it in the middle?

Page 17: Defining Programs, Specifications, fault-tolerance, etc

Invariant

• We say that state predicate S is an invariant of p iff the following condition is satisfied– S is closed in p– Every computation of p that starts from a state in p is in

the specification • (Alternatively, every computation of p that starts from a state in

p satisfies its specification)

– If the specification is suffix closed and fusion closed and the program is correct from some initial states, then the set of reachable states from initial states is an invariant of the program

Page 18: Defining Programs, Specifications, fault-tolerance, etc

Invariant

p

Page 19: Defining Programs, Specifications, fault-tolerance, etc

Example of Invariant

• For climate control system, – sync = 1 dt = pt is an invariant

Page 20: Defining Programs, Specifications, fault-tolerance, etc

Faults

• Also modeled as a set of transitions– (or guarded commands)

– Recall the example from first class of going from one location to another

– Effect of faults

Page 21: Defining Programs, Specifications, fault-tolerance, etc

Fault Span

• Let T be a state predicate

• T is a f-span of p from S iff the following conditions are satisfied– S T (same as S T)– T is closed in p [] f

Page 22: Defining Programs, Specifications, fault-tolerance, etc

Fault-Span

p/ff

p

Fault span is the boundary upto which faults can perturb the program

Page 23: Defining Programs, Specifications, fault-tolerance, etc

Computation in the presence of faults

• A computation of p– In every step, execute a transition of p

• A computation of p[]f – In every step, execute a transition of p or a transition of

f

– Number of fault transitions in any computation is finite

– Fairness??

Page 24: Defining Programs, Specifications, fault-tolerance, etc

Levels of Fault-Tolerance

• Irrespective of level of fault-tolerance, the program satisfies its specification from its invariant

• Levels are determined based on behavior in fault span

Page 25: Defining Programs, Specifications, fault-tolerance, etc

Failsafe Fault-tolerance

• p is failsafe f-tolerant to spec from S iff– p satisfies spec from S– There exists T such that

• T is a f-span of p from S

• Every computation of p[]f that starts from T satisfies the safety of spec

– Recall spec can be expressed as an intersection of safety and liveness. In the presence of faults, the failsafe program satisfies the safety part of it.

Page 26: Defining Programs, Specifications, fault-tolerance, etc

Failsafe Fault-Tolerance

p/ff

p

Computations here meet safety specification

Page 27: Defining Programs, Specifications, fault-tolerance, etc

Nonmasking Fault-Tolerance

• p is nonmasking f-tolerant to spec from S iff– p satisfies spec from S– There exists T such that

• T is a f-span of p from S

• Every computation of p[]f that starts from T eventually reaches a state in S

– Thus, a computation of p has a suffix that satisfies its specification

Page 28: Defining Programs, Specifications, fault-tolerance, etc

Nonmasking Fault-Tolerance

p/ff

p

Computations here eventually reach S, safety may be violated before reaching S

S

Page 29: Defining Programs, Specifications, fault-tolerance, etc

Masking Fault-Tolerance

• p is masking f-tolerant to spec from S iff– p satisfies spec from S– There exists T such that

• T is a f-span of p from S

• Every computation of p[]f that starts from T satisfies the safety of spec

• Every computation of p[]f that starts from T eventually reaches a state in S

Page 30: Defining Programs, Specifications, fault-tolerance, etc

Masking Fault-Tolerance

p/ff

p

Computations here meet safety specification and eventually reach S

S