delegated decisions cen · 2017. 7. 20. · uni nen 14. the decision was taken by ... it proves...

DDD 26 2017 2017-06-26 Page 1

CEN System - Delegated Decisions Dispatch 26:2017

1 CEN/TC 23 .................................................................................................................................. 1 2 CEN/TC 69 .................................................................................................................................. 3 3 CEN/TC 113 ................................................................................................................................ 4 4 CEN/TC 134 ................................................................................................................................ 6 5 CEN/TC 144 ................................................................................................................................ 6 6 CEN/TC 154 ................................................................................................................................ 9 7 CEN/TC 155 .............................................................................................................................. 10 8 CEN/TC 187 .............................................................................................................................. 12 9 CEN/TC 190 .............................................................................................................................. 15 10 CEN/TC 216 .............................................................................................................................. 16 11 CEN/TC 226 .............................................................................................................................. 19 12 CEN/TC 246 .............................................................................................................................. 20 13 CEN/TC 247 .............................................................................................................................. 22 14 CEN/TC 249 .............................................................................................................................. 22 15 CEN/TC 278 .............................................................................................................................. 24 16 CEN/TC 299 .............................................................................................................................. 26 17 CEN/TC 351 .............................................................................................................................. 26 18 CEN/TC 352 .............................................................................................................................. 27 19 CEN/TC 438 .............................................................................................................................. 27 20 CEN/TC 442 .............................................................................................................................. 29

1 CEN/TC 23 Decision CEN/TC 23 167/2017 taken on 2017-06-19 Subject: Adoption of a New Work Item CEN/TC 23 - Transportable gas cylinders

• having considered the proposal for a new work item as documented in CEN/TC 23 N 1073

• having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS

• confirming that the new work item falls within its scope

• confirming that the new work item corresponds to real market needs

• confirming that the resources to complete the work below are available

• decides to register the work item described below in its active programme of work

Section Details

DDD 26 2017 Page 2 1. Deliverable EN

2. This item corresponds to

A new project

3. Document developed in drafting body

CEN/TC 23 - Transportable gas cylinders

4. Title Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing

5. Scope To expand the scope of ISO 10460:2005 to include requirements for the periodic inspection and testing of welded aluminium alloy and stainless steel cylinders and to refresh the Normative references list in order to bring it up to date. The revision will contain requirements that apply to all cylinder types covered in the scope as well as specific requirements (possibly as Normative Annexes) for particular cylinder material types (e.g. aluminium alloys).

6. Environmental aspects

Other: Not yet decided

7. How do you plan to address these environmental aspects?

Use of environmental checklist

8. Vienna Agreement

Yes - Parallel ISO lead ISO project reference: 10460 ISO project ID: 68494 ISO TC: ISO/TC 58

9. The project is linked to

No document from another organization

10. Track Enquiry + Formal Vote (ENQ+FV)

11. Related mandate(s)

No

12. Related directive(s)

No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR ASI SIS BSI DIN UNI NEN

14. The decision was taken by

Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01,

DDD 26 2017 Page 3

min. 65% from 2017-01-01):100 Number of positive votes: 12 Number of negative votes: 0 Number of abstentions: 7

2 CEN/TC 69 Decision CEN/TC 69 743/2017 taken on 2017-06-20 Subject: 3 year time-frame for the development of WI 00069185 - 9 month Tolerance Request. CEN/TC 69 - Industrial valves • considering Resolution BT 34/2002 by which BT decided that any work item to result in

an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes;

• considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, to claim one tolerance of 9 months, applicable to the target dates for submission of a draft to CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA);

• considering that for work item 00069185 - prEN 17070 - Industrial valves - Minimum performance requirements, it proves impossible to Dispatch FV draft to CMC by 2018-06-07;

• claims a tolerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: disapproval with substantial comments during the CEN Enquiry

• confirms that CEN/TC 69 will Dispatch FV draft to CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2019-03-07 at the latest.

The decision was taken by simple majority with 7 positive vote(s), 0 negative vote(s) and 0 abstention(s).

DDD 26 2017 Page 4

Decision CEN/TC 69 750/2017 taken on 2017-06-20 Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher CEN/TC 69 - Industrial valves

• having received and agreed upon the reasons why harmonization is no longer needed;

• considering that the work item(s) are neither mandated nor covered by an Order Voucher;

• noting the consequences of release of standstill;

decides to delete the following work item(s): WI 00069187 prEN 15714-6 - Industrial valves - Actuators - Part 6: Actuators for pipeline valves used in petroleum and natural gas industries

and decides to release the standstill on these work item(s).

The decision was taken by unanimity.

3 CEN/TC 113 Decision CEN/TC 113 574/2017 taken on 2017-06-01 Subject: Adoption of a New Work Item CEN/TC 113 Heat pumps and air conditioning units







Section Details

1. Deliverable EN


An amendment to an EN EN 13215:2016

DDD 26 2017 Page 5 3. Document developed in drafting body

CEN/TC 113/WG 6 - Refrigerant compressors - Presentation of performance data

4. Title Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

5. Scope This European Standard specifies the rating conditions, tolerances and presentation of manufacturer's performance data for condensing units for refrigeration with compressors of the positive-displacement type. These include single stage compressors and single and two stage compressors having an integrated means of fluid sub cooling. This is required so that a comparison of different condensing units can be made. The data relate to the refrigerating capacity and power absorbed and include requirements for part-load performance where applicable.


Emissions to air Heat Noise/Vibration Use of energy Risk to the environment from accidents/misuse


Other: Experts of WG aware on the enviromental aspects

8. Vienna Agreement

No or expected CEN lead





Yes M/495


Yes Directive reference | For citation in Official journal 2009/125/EC | Yes 2015/1095 | Yes

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR ASRO LST SNV DIN UNI


Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 6

DDD 26 2017 Page 6

Number of negative votes: 0 Number of abstentions: 13

4 CEN/TC 134 Decision CEN/TC 134 11/2017 taken on 2017-06-01 Subject: CEN/TC 134 - Decision to skip the Formal Vote CEN/TC 134 - Resilient, textile and laminate floor coverings

• considering the results of the Enquiry ballot;

• considering the table of decisions and the formal written proposals as distributed after the comments decision meeting;

• considering the CEN/CENELEC Internal Regulations - Part 2, clause 11.2.3;

• considering Decisions BT 34/2002, BT 42/2003 and related document BT N 6962 concerning timeframes for the development of ENs;

• considering Decision BT 35/2014 to associate a vote to the CEN Enquiry and to allow Technical Bodies to decide to skip the Formal Vote;

• considering Decision 49/2014 to allow Technical Bodies to decide to skip the Formal Vote through a TC decision based on simple majority only;

decides to skip the Formal Vote and proceed with the publication of WI 00134249 – EN 13329:2016/prA1 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods (In this case the TC must not finalize the publication, this will be done by CCMC. Instead the TC must notify CCMC of its intention to skip Formal Vote by posting only an electronic transmission notice onto eTrans.)


5 CEN/TC 144 Decision CEN/TC 144 634/2017 taken on 2017-06-12 Subject: Activation of preliminary Work Item 00144358 - prEN 703 rev CEN/TC 144 - Tractors and machinery for agriculture and forestry

• having considered the proposal for the activation of work item 00144358 currently registered at preliminary stage 00.60 as documented in CEN/TC 144 N 2026


DDD 26 2017 Page 7





Section Details

1. Deliverable EN


The revision of an EN EN 703:2004+A1:2009


CEN/TC 144/WG 3 - Mobile machines and trailers

4. Title Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

5. Scope This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

This document applies only to machines that have the following functional combinations: - mixing and distributing functions; or - mixing, chopping and distributing functions; or - loading, mixing and distributing functions; or - loading, mixing, chopping and distributing functions; or - chopping and distributing functions; or - loading, chopping and distributing functions.

Silage block cutters, even if they carry out a single function, are covered by this document.

It does not apply: - to machines which pick up green fodder directly from the field; - to loading cranes; - to silage buckets.

NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision.

This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising

DDD 26 2017 Page 8

from: - failure of the control circuit; - inadequate seating; - inadequate lighting; - impossibility of stopping the machine in the best possible conditions; - travelling of machinery; - break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise).


Noise/Vibration


Bring in environmental expertise to the WG

8. Vienna Agreement






Yes M/396


Yes Directive reference | For citation in Official journal 2006/42/EC | Yes

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SNV DIN DS NBN UNI


Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 16 Number of negative votes: 0 Number of abstentions: 6

DDD 26 2017 Page 9

6 CEN/TC 154 DECISION 03/2017 taken by CEN/TC 154 on 2017-06-02

Subject: CEN/TC 154- Appointment of Chairperson

The CEN/TC 154 Aggregates - considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which

lays down the rules for nomination, appointment and responsibilities of Chairpersons;

- noting the nomination by the Technical Committee Secretariat;

- noting the commitment of the applicant to the responsibilities and duties of a

Technical Committee Chairperson as given in the CEN BOSS;

(Option 1 )

decides to appoint Mr Johan Heutinck as Chairperson of CEN/TC 154/SC 1 for a period of 6

years starting on 2017-06-02.


DECISION 04/2017 taken by CEN/TC 154 on 2017-06-02







(Option 1 )

decides to appoint Mr Mike Higgins as Chairperson of CEN/TC 154/SC 2 for a period of 6



DDD 26 2017 Page 10 DECISION 05/2017 taken by CEN/TC 154 on 2017-06-02







(Option 1 )

decides to appoint Mr Mike Wharton as Chairperson of CEN/TC 154/SC 6 for a period of 6



7 CEN/TC 155 Decision CEN/TC 155 1333/2017 taken on 2017-06-12 Subject: Adoption of a New Work Item CEN/TC 155 - Plastics piping systems and ducting systems







Section Details

1. Deliverable EN


A new project

3. Document developed in drafting

CEN/TC 155/WG 17 - Rehabilitation of pipeline systems

DDD 26 2017 Page 11 body

4. Title Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes

5. Scope This document, read in conjunction with Part 1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground gas supply networks. It is applicable to polyethylene (PE) pipes of three different types: PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes; PE pipes with co--- extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating; PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), see Annex A. In addition it covers: jointing of pipe lengths by means of butt fusion; fabricated and injection--- moulded fittings made of PE;


Other: not addressed by CEN/TC 155


Other: not applicable

8. Vienna Agreement

Yes - Parallel ISO lead ISO project reference: 11299-2 ISO project ID: 70125 ISO TC: ISO/TC 138





No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: ASI BSI DIN UNI NEN


Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 13

DDD 26 2017 Page 12

Number of negative votes: 0 Number of abstentions: 6

8 CEN/TC 187 Decision CEN/TC 187 02/2017 taken on 2017-06-07 Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher CEN/TC 187 - Refractory products and materials




decides to delete the following work item(s): WI 00187127 - Determination of shot content of High Temperature Insulation Wool (HTIW) products



Decision CEN/TC 187 03/2017 taken on 2017-06-07 Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher CEN/TC 187 - Refractory products and materials




decides to delete the following work item(s): WI 00187128 - Three point bend test for High Temperature Insulation Wool (HTIW) Boards



DDD 26 2017 Page 13





decides to delete the following work item(s): WI 00187129 - Determination of thermal conductivity of High Temperature Insulation Wool (HTIW) products







decides to delete the following work item(s): WI 00187130 - Determination of mean fibre diameter & fibre distribution of High Temperature Insulation Wools (HTIWs) by Scanning Electron Microscopy (SEM)



DDD 26 2017 Page 14

Decision CEN/TC 187 06/2017 taken on 2017-06-07 Subject: Adoption of a Preliminary Work Item CEN/TC 187 - Refractory products and materials







Section Details

1. Deliverable EN


The revision of an EN EN 14945:2005


CEN/TC 187/WG 4 - Chemical analysis

4. Title Refractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use

5. Scope This European Standard describes a method for the spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use. It is applicable to fired magnesia-chrome products (containing natural chromite, fused grain or co-clinker) and to unfired materials (with refractory cement or chemical bonds) although it is not to be restricted to these types of refractory. The method is applicable to concentrations up to 500 mg/kg of chromium (VI). This range may be extended or reduced by modifying the dilution factors.

6. Environmental aspects - OPTIONAL

7. How do you plan to address these environmental aspects? - OPTIONAL


DDD 26 2017 Page 15 9. Related mandate(s)

No


No


Simple majority Number of positive votes: 5 Number of negative votes: 0 Number of abstentions: 0

9 CEN/TC 190 Decision CEN/TC 190 16/2016 taken on 2016-11-23 Subject: Adoption of a Preliminary Work Item CEN/TC 190 Foundry technology







Section Details

1. Deliverable EN


The revision of an EN EN 1559-1:2011


CEN/TC 190/WG 1 - Technical conditions of delivery and cast material designation

4. Title Founding - Technical conditions of delivery - Part 1: General

5. Scope This part of EN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings. This part of EN 1559 is not applicable to metallic castings for further reprocessing such as forging ingots and continuously cast billets and blooms. NOTE 1: Technical delivery conditions for copper alloy castings are

DDD 26 2017 Page 16

specified in EN 1982. NOTE 2: Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN 1559-2 for cast steel; EN 1559-3 for cast iron; EN 1559-4 for cast aluminium; EN 1559-5 for cast magnesium; EN 1559-6 for cast zinc.


None of the above: This part of EN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.


Other: Experts in the working group



No


No



10 CEN/TC 216 Decision CEN/TC 216 13/2017 taken on 2017-05-16 Subject: Adoption of a Preliminary Work Item CEN/TC 216 Chemical disinfectants and antiseptics







Section Details



A new project


CEN/TC 216/WG 3 - Food hygiene and domestic and institutional use

4. Title Quantitative surface test for the evaluation of residual antimicrobial (bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectants on hard non-porous surfaces. Test method

5. Scope This PAS specifies a test method for residual bactericidal and/or yeasticidal activity of liquid, chemical disinfectant products that are applied to hard, non-porous surfaces which are likely to undergo abrasive action. The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used in accordance with BS EN 13697:2001.

It has been designed as an extension of BS EN 13697:2001 and is intended to be used in conjunction with this recognized standard allowing BS EN 13697:2001 to assess the initial antimicrobial action of a product and PAS 2424 to assess the residual antimicrobial action. Therefore the results from this PAS will only be considered if the product tested also achieves a pass according to BS EN 13697:2001 (≥4 log reduction) under conditions required for the test product’s application of use (e.g. specified contact times, micro-organisms, organic load, etc.).

It is applicable to ready-to-use products or dilute-to-use products that form a homogeneous, physically stable preparation when diluted with hard water.

It is applicable to products that are used in areas that are covered in BS EN 13697:2001. This includes but is not limited to hard surfaces in the food industry, institutional areas such as schools, hospitals and nursing homes, in the workplace and in the home/domestic environment.

It is not applicable to thickened or viscous products such as toilet bleaches or gels, wash-off products and products that are permanently bound to a surface.

This PAS is designed for laboratories that perform antimicrobial testing in order to test the residual antimicrobial properties of liquid, chemical disinfectant products.

NOTE 1 The sticky nature of thickened products and gels make the abrasion regime difficult to perform and therefore could lead to unreliable results. NOTE 2 The testing of wash-off products would require a method with the inclusion of a rinsing step. NOTE 3 Intrinsically antimicrobial surfaces are designed to remain active for longer than the 24 h covered in this test method.

DDD 26 2017 Page 18 6. Environmental aspects - OPTIONAL

Discharges to soil Emissions to air Use of materials Use of water Discharges to water Waste


Other: EN 14885 forward + other statement if considered appropriate



No


No



Decision CEN/TC 216 20/2017 taken on 2017-06-18 Subject: CEN/TC 216 - Decision to skip the Formal Vote CEN/TC 216 Chemical disinfectants and antiseptics

• considering the results of the Enquiry ballot;




• considering Decision BT 35/2014 to associate a vote to the CEN Enquiry and to allow Technical Bodies to decide to skip the Formal Vote;


decides to skip the Formal Vote and proceed with the publication of WI 00216114 - EN 12791:2016/prA1:2017 - Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) (In this case the TC must not finalize the publication, this will be done by CCMC. Instead the TC must notify CCMC of its intention to skip Formal Vote by posting only an electronic transmission notice onto eTrans.)


DDD 26 2017 Page 19

11 CEN/TC 226 Decision CEN/TC 226 622c/2017 taken on 2017-06-21 Subject: Activation of preliminary Work Item 00226196 - prEN 12414 rev CEN/TC 226 Road equipment

• having considered the proposal for the activation of work item 00226196 currently registered at preliminary stage 00.60 as documented in CEN/TC 226 N 1621






Section Details

1. Deliverable EN


The revision of an EN EN 12414:1999


CEN/TC 226/WG 9 - Clockwork parking meters and automatic car park ticket dispensers

4. Title Vehicle parking control equipment - Requirements and test methods for a parking terminal

5. Scope This standard specifies the technical and functional requirements and test methods for parking terminals installed on or off-street. It applies to unattended terminals used to obtain the right to park for visual and / or electronic control of an unlimited number of road vehicles, against payment or not. This standard covers only the terminal aspects of the parking system. This standard does not cover mobile phone applications or pay-on-foot terminals.


Other: No environmental comment


Other: Not relevant

8. Vienna Agreement


DDD 26 2017 Page 20 9. The project is linked to




No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS SN BSI DIN


Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 12 Number of negative votes: 0 Number of abstentions: 10

12 CEN/TC 246 Decision 001/2017 taken by TC 246 on 2017-06-09

Subject : Decision on the future of prEN 12440 after CEN Enquiry

TC 246, Natural Stones • considering the results of the Enquiry ballot;




• considering Decision BT 35/2014 to associate a vote to the CEN Enquiry and to allow Technical Bodies to decide to skip the Formal Vote


Decides; to skip the Formal Vote and proceed with the publication of EN 12440 Natural stone -

DDD 26 2017 Page 21 Denomination criteria (In this case the TC must not finalize the publication, this will be done by CCMC. Instead the TC must notify CCMC of its intention to skip Formal Vote by posting only an electronic transmission notice onto eTrans.)


Decision 005/2017 taken by TC 246 on 2017-06-09

Subject : Decision on the future of prEN 14157 after CEN Enquiry

TC 246, Natural Stones • considering the results of the Enquiry ballot;




• considering Decision BT 35/2014 to associate a vote to the CEN Enquiry and to allow Technical Bodies to decide to skip the Formal Vote - considering Decision 49/2014 to allow Technical Bodies to decide to skip the Formal Vote through a TC decision based on simple majority only;

Decides; to skip the Formal Vote and proceed with the publication of EN 14157 Natural stone test methods - Determination of the abrasion resistance (In this case the TC must not finalize the publication, this will be done by CCMC. Instead the TC must notify CCMC of its intention to skip Formal Vote by posting only an electronic transmission notice onto eTrans.)


DDD 26 2017 Page 22

13 CEN/TC 247 DECISION CEN/TC 247 419/2017 taken on 2017-06-20 Subject: CEN/TC 247 Building Automation, Controls and Building Management – Appointment of Chairperson CEN/TC 247 - Building Automation, Controls and Building Management

• considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons;

• noting the nomination by the Technical Committee Secretariat;

• noting the commitment of the applicant to the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS;

decides to appoint Tor I. Hoel as Chairperson of CEN/TC 247 for a period of 6 years starting on 2017-06-20.

The decision was taken by unanimity with 15 positive votes, 0 negatives votes and 7 abstentions.

14 CEN/TC 249 Decision CEN/TC 249 630R/2017 taken on 2016-06-20 Subject: Adoption of a Preliminary Work Item CEN/TC 249 Plastics







Section Details

1. Deliverable EN


A new project

DDD 26 2017 Page 23 3. Document developed in drafting body

CEN/TC 249/WG 11 - Plastics recycling

4. Title Plastics - Controlled loop methodology for recycling of post-consumer (or post-use) PVC-U windows and doors

5. Scope This European Standard defines a quality approval for the controlled loop method of recycling of used PVC windows and doors. Exact description of the origin of material streams as well as its further treatment and processing Description of the process management incl. the application of quality management Relationship to the existing standards such as waste characterization, traceability, specification of recycled materials and products etc. It gives the most important characteristics and associated test methods for assessing of PVC recyclates intended for use in the production of semi-finished/finished products, in particular plastic windows. Plastic pipes made out of PVC-U are considered to be a customer. It is intended to support parties involved in use of recycled PVC to agree on specification from specific and generic applications.


Waste


Bring in environmental expertise to the WG Use of environmental checklist



No


No



DDD 26 2017 Page 24

15 CEN/TC 278 Decision CEN/TC 278 018/2017 taken on 2017-06-22 Subject: Adoption of a New Work Item CEN/TC 278 - Intelligent transport systems







Section Details

1. Deliverable TS


The revision of a CEN/TS CEN/TS 16702-1:2014


CEN/TC 278/WG 1 - Electronic fee collection and access control (EFC)

4. Title Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checking

5. Scope This Technical Specification specifies transactions and data for Compliance Checking - Secure Monitoring. The scope of this technical specification consists of: - The concept and involved processes for Secure Monitoring. - The definition of new transactions and data. - The use of the OBE compliance checking transaction as specified in CEN ISO/TS 12813:2009, for the purpose of Compliance Checking - Secure Monitoring. - The use of back end transactions as specified in EN ISO 12855:2012, for the purpose of Compliance Checking â¿¿ Secure Monitoring. This includes definitions for the use of optional elements and reserved attributes. - A specification of technical and organisational security measures involved in Secure Monitoring, on top of measures provided for in the EFC Security Framework. - The interrelations between different options in the OBE, TSP and TC domain and their high level impacts.

DDD 26 2017 Page 25

Outside the scope of this Technical Specification are: - Information exchange between OBE and TR. - Choices related to compliance checking policies e.g. which options are used, whether undetected/unexpected observations are applied, whether fixed, transportable and/or mobile compliance checking are deployed, locations and intensity of checking of itinerary freezing and checking of toll declaration. - Details of procedures and criteria for assessing the validity or plausibility of Itinerary Records. - Choices concerning the storage location of itinerary records, and data retention policy. - Recommendations for a single specific implementation due to different applicable privacy laws. Instead, a set of options is provided.


Other: n/a


Other: n/a

8. Vienna Agreement




10. Track Vote on TS/TR by correspondence


No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: ASI SIS SNV UNI PKN


Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 11 Number of negative votes: 0 Number of abstentions: 10

DDD 26 2017 Page 26

16 CEN/TC 299 DECISION 11/2017 taken by CEN/TC 299 on 2017-05-19

Subject: CEN/TC 299 - Deletion of work item(s) neither mandated nor covered by a Specific Agreement

CEN/TC 299 Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances, • considering that the work item(s) are neither mandated nor covered by a Specific

Agreement;


decides to delete the following work item:

• WI 00299030 Indirect-heated sorption appliances for heating and/or cooling;

and decides to release the standstill on this work item.

The decision on the deletion of the work item(s) was taken by simple majority with 6 positive votes and 13 abstentions.

17 CEN/TC 351 DECISION 268 taken by CEN/TC 351on 2017-06-15

Subject: CEN/TC 351 – Renewal of the participation of IZA-Europe as Liaison Organization

The CEN/TC 351 Construction Products: Assessment of release of dangerous substances,

• considering the CEN/CENELEC Internal Regulations - Part 2, subclause 4.3.2,

• which lays down the conditions for external liaisons;

• considering that the conditions laid down in CEN/CENELEC Guide 25 “The concept of partnership with European organizations and other stakeholders” are fulfilled;

• considering the decision already taken in 2006 (DD 42/2006);

agrees to the renewal of the participation of the International Zinc Association – European Bureau in CEN/TC 351, and requests the CEN-CENELEC Management Centre to inform IZA-Europe accordingly of this decision.


DDD 26 2017 Page 27

18 CEN/TC 352 DECISION 6/2017 taken by CEN/TC 352 on 2017-03-23 Subject: CEN/TC 352 – Deletion of work item neither mandated nor covered by a Specific Agreement and possible release of their standstill Based on the result of TC enquiry (N 570), CEN/TC 352 Nanotechnologies,


• considering that the work item is neither mandated nor covered by a Specific Agreement;

• noting the consequences of release of standstill; decides to delete the following work item:

• WI 00352023 "Manufactured nanomaterials (MNMs) in the construction industry. Guidelines for occupational risk management" ;

and decides to release the standstill on this work item.

The decision on the deletion of the work item was taken by unanimity..

19 CEN/TC 438 Decision CEN/TC 438 29/2017 taken on 2017-06-19 Subject: Adoption of a New Work Item CEN/TC 438 Additive Manufacturing







Section Details



A new project


CEN/TC 438 - Additive Manufacturing

4. Title Additive manufacturing - Technical specifications on metal powders

5. Scope This International Standard deals with technical specifications for metallic powders intended to be used in additive manufacturing and covers the following aspects:

• Documentation and traceability • Sampling • Particle size distribution • Chemical composition • Characteristic densities • Morphology • Flowability • Thermal characteristics • Cleanliness • Packaging and storage

This International Standard does not deal with safety aspects. In addition, this International Standard gives specific requirements for reused metallic powders in additive manufacturing.


Other: not relevant


Other: Not relevant

8. Vienna Agreement

Yes - Parallel ISO lead ISO project reference: 52907 ISO project ID: 73565 ISO TC: ISO/TC 261





No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR

DDD 26 2017 Page 29

SIS BSI DIN NBN UNI NEN



20 CEN/TC 442 Decision CEN/TC 442 090/2017 taken on 2017-06-20 Subject: CEN/TC 442 – Participation of EUROVENT CEN/TC 442 - Building Information Modelling (BIM)

• considering the CEN/CENELEC Internal Regulations - Part 2, subclause 4.3.2, which lays down the conditions for external liaisons;

• considering that the conditions laid down in CEN-CENELEC Guide 25 “The concept of partnership with European organizations and other stakeholders” are fulfilled;

• agrees to the participation of the Europe’s Industry Association for Indoor Climate, Process Cooling, and Food Cold Chain Technologies in CEN/TC 442;

• requests the CEN-CENELEC Management Centre to inform EUROVENT accordingly of this decision.

The decision was taken by unanimity

Decision CEN/TC 442 094/2017 taken on 2017-06-20 Subject: Adoption of a New Work Item CEN/TC 442 - Building Information Modelling (BIM)






DDD 26 2017 Page 30


Section Details

1. Deliverable EN


A new project


CEN/TC 442 - Building Information Modelling (BIM)

4. Title Information container for data drop (ICDD)

5. Scope This is a proposal to develop ISO/NP 21597 Information container for data drop (ICDD) in parallel in ISO and CEN under the Vienna Agreement.

This proposed ISO standard provides a data exchange and storage mechanism by means of a container or envelope for BIM related data/information which can be represented using multiple existing ISO-IEC standards.

The standard provides a semantic model comprising a small core information model which can be extended with reference information models and object libraries for specific domains. Further support is provided for meta data notation and version management of exchanged data.

The standard provides functionality to integrate data structures which are a combination of RDF formatted, non geometric data structures and standardized geometric data structures like IFC and GML by deep linking to data structures of these types, object type libraries and non structured documents.

Doing so, the standard enables data drop as one information package with multiple data formats.

By using the mechanism of extensions with reference models, support can be added for various methods of version management including PLCS. Together with object type libraries, it offers capabilities to exchange data defined by information models that cover Systems Engineering, BIM, GIS and Life Cycle information management.

The elaboration of this standard will harvest the work done on COINS in NL and will include the existing examples of it.

The intended users and implementers of this standard includes software vendors and IT individuals, working in the field of buildings and infrastructure assets, offering software for procurement, design, construction, delivery, operation and maintenance. It also includes suppliers of project hotels and asset management databases.


None of the above: This proposed standard provides a data exchange and storage mechanism for BIM related data/information, and will not influence on environmental aspects.

DDD 26 2017 Page 31 7. How do you plan to address these environmental aspects?

Other: Not relevant.

8. Vienna Agreement

Yes - Parallel ISO lead ISO project reference: ISO/NP 21597 ISO project ID: 71207 ISO TC: ISO/TC 59





No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS ASI SIS BSI DIN



CEN System - Delegated DecisionsDispatch 26:20172 CEN/TC 69 33 CEN/TC 113 44 CEN/TC 134 65 CEN/TC 144 66 CEN/TC 154 97 CEN/TC 155 108 CEN/TC 187 129 CEN/TC 190 1510 CEN/TC 216 1611 CEN/TC 226 1912 CEN/TC 246 2013 CEN/TC 247 2214 CEN/TC 249 2215 CEN/TC 278 2416 CEN/TC 299 2617 CEN/TC 351 2618 CEN/TC 352 2719 CEN/TC 438 2720 CEN/TC 442 291 CEN/TC 23Decision CEN/TC 23 167/2017 taken on 2017-06-19CEN/TC 23 - Transportable gas cylinders

Subject: Adoption of a New Work Item having considered the proposal for a new work item as documented in CEN/TC 23 N 1073 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section 1 CEN/TC 23 1EN1. DeliverableA new project2. This item corresponds toCEN/TC 23 - Transportable gas cylinders3. Document developed in drafting bodyGas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing4. TitleTo expand the scope of ISO 10460:2005 to include requirements for the periodic inspection and testing of welded aluminium alloy and stainless steel cylinders and to refresh the Normative references list in order to bring it up to date.The revision will contain requirements that apply to all cylinder types covered in the scope as well as specific requirements (possibly as Normative Annexes) for particular cylinder material types (e.g. aluminium alloys).5. ScopeOther: Not yet decided6. Environmental aspectsUse of environmental checklist7. How do you plan to address these environmental aspects?Yes - Parallel ISO leadISO project reference: 10460ISO project ID: 68494ISO TC: ISO/TC 588. Vienna AgreementNo document from another organization9. The project is linked toEnquiry + Formal Vote (ENQ+FV)10. TrackNo11. Related mandate(s)No12. Related directive(s)The following CEN members (at least five) are committed to participate in the development of the project:AFNORASISISBSIDINUNINEN13. CommitmentWeighted vote and simple majorityPercentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100Number of positive votes: 12Number of negative votes: 0Number of abstentions: 714. The decision was taken by2 CEN/TC 69Decision CEN/TC 69 743/2017 taken on 2017-06-20CEN/TC 69 - Industrial valvesDecision CEN/TC 69 750/2017 taken on 2017-06-20CEN/TC 69 - Industrial valves

Subject: 3 year time-frame for the development of WI 00069185 - 9 month Tolerance Request. considering Resolution BT 34/2002 by which BT decided that any work item to result in an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, to claim one tolerance of 9 months, applicable to the target dates for submission of a draft to CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA); considering that for work item 00069185 - prEN 17070 - Industrial valves - Minimum performance requirements, it proves impossible to Dispatch FV draft to CMC by 2018-06-07; claims a tolerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: disapproval with substantial comments during the CEN Enquiry confirms that CEN/TC 69 will Dispatch FV draft to CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2019-03-07 at the latest. The decision was taken by simple majority with 7 positive vote(s), 0 negative vote(s) and 0 abstention(s). Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher having received and agreed upon the reasons why harmonization is no longer needed; considering that the work item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following work item(s): WI 00069187 prEN 15714-6 - Industrial valves - Actuators - Part 6: Actuators for pipeline valves used in petroleum and natural gas industriesand decides to release the standstill on these work item(s). The decision was taken by unanimity. 3 CEN/TC 113Decision CEN/TC 113 574/2017 taken on 2017-06-01CEN/TC 113 Heat pumps and air conditioning units

Subject: Adoption of a New Work Item having considered the proposal for a new work item as documented in CEN/TC 113 N 904 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableAn amendment to an ENEN 13215:20162. This item corresponds toCEN/TC 113/WG 6 - Refrigerant compressors - Presentation of performance data3. Document developed in drafting bodyCondensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data4. TitleThis European Standard specifies the rating conditions, tolerances and presentation of manufacturer's performance data for condensing units for refrigeration with compressors of the positive-displacement type. These include single stage compressors and single and two stage compressors having an integrated means of fluid sub cooling. This is required so that a comparison of different condensing units can be made. The data relate to the refrigerating capacity and power absorbed and include requirements for part-load performance where applicable.5. ScopeEmissions to airHeatNoise/VibrationUse of energyRisk to the environment from accidents/misuse6. Environmental aspectsOther: Experts of WG aware on the enviromental aspects7. How do you plan to address these environmental aspects?No or expected CEN lead8. Vienna AgreementNo document from another organization9. The project is linked toEnquiry + Formal Vote (ENQ+FV)10. TrackYesM/49511. Related mandate(s)YesDirective reference | For citation in Official journal2009/125/EC | Yes2015/1095 | Yes12. Related directive(s)The following CEN members (at least five) are committed to participate in the development of the project:AFNORASROLSTSNVDINUNI13. CommitmentWeighted vote and simple majorityPercentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100Number of positive votes: 6Number of negative votes: 0Number of abstentions: 1314. The decision was taken by4 CEN/TC 134Decision CEN/TC 134 11/2017 taken on 2017-06-01CEN/TC 134 - Resilient, textile and laminate floor coverings

Subject: CEN/TC 134 - Decision to skip the Formal Vote considering the results of the Enquiry ballot; considering the table of decisions and the formal written proposals as distributed after the comments decision meeting; considering the CEN/CENELEC Internal Regulations - Part 2, clause 11.2.3; considering Decisions BT 34/2002, BT 42/2003 and related document BT N 6962 concerning timeframes for the development of ENs; considering Decision BT 35/2014 to associate a vote to the CEN Enquiry and to allow Technical Bodies to decide to skip the Formal Vote; considering Decision 49/2014 to allow Technical Bodies to decide to skip the Formal Vote through a TC decision based on simple majority only; decides to skip the Formal Vote and proceed with the publication of WI 00134249 – EN 13329:2016/prA1 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods (In this case the TC must not finalize the publication, this will be done by CCMC. Instead the TC must notify CCMC of its intention to skip Formal Vote by posting only an electronic transmission notice onto eTrans.)The decision was taken by unanimity. 5 CEN/TC 144Decision CEN/TC 144 634/2017 taken on 2017-06-12CEN/TC 144 - Tractors and machinery for agriculture and forestry

Subject: Activation of preliminary Work Item 00144358 - prEN 703 rev having considered the proposal for the activation of work item 00144358 currently registered at preliminary stage 00.60 as documented in CEN/TC 144 N 2026 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableThe revision of an ENEN 703:2004+A1:20092. This item corresponds toCEN/TC 144/WG 3 - Mobile machines and trailers3. Document developed in drafting bodyAgricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety4. TitleThis document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.5. ScopeThis document applies only to machines that have the following functional combinations:- mixing and distributing functions; or- mixing, chopping and distributing functions; or- loading, mixing and distributing functions; or- loading, mixing, chopping and distributing functions; or - chopping and distributing functions; or- loading, chopping and distributing functions.Silage block cutters, even if they carry out a single function, are covered by this document.It does not apply:- to machines which pick up green fodder directly from the field;- to loading cranes;- to silage buckets.NOTE 1 Loading cranes are dealt with in EN 12999.NOTE 2 Silage buckets will be dealt through an amendment or during next revision.This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from:- failure of the control circuit;- inadequate seating;- inadequate lighting;- impossibility of stopping the machine in the best possible conditions;- travelling of machinery;- break-up of parts rotating at high speed.It is not applicable to environmental hazards (except noise).Noise/Vibration6. Environmental aspectsBring in environmental expertise to the WG7. How do you plan to address these environmental aspects?No or expected CEN lead8. Vienna AgreementNo document from another organization9. The project is linked toEnquiry + Formal Vote (ENQ+FV)10. TrackYesM/39611. Related mandate(s)YesDirective reference | For citation in Official journal2006/42/EC | Yes12. Related directive(s)The following CEN members (at least five) are committed to participate in the development of the project:AFNORSNVDINDSNBNUNI13. CommitmentSimple majority (min. 55% as from 2017-01-01)Number of positive votes: 16Number of negative votes: 0Number of abstentions: 614. The decision was taken by6 CEN/TC 154DECISION 03/2017 taken by CEN/TC 154 on 2017-06-02Subject: CEN/TC 154- Appointment of ChairpersonThe CEN/TC 154 AggregatesDECISION 04/2017 taken by CEN/TC 154 on 2017-06-02Subject: CEN/TC 154- Appointment of ChairpersonThe CEN/TC 154 AggregatesDECISION 05/2017 taken by CEN/TC 154 on 2017-06-02Subject: CEN/TC 154- Appointment of ChairpersonThe CEN/TC 154 Aggregates

- considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons;- noting the nomination by the Technical Committee Secretariat;- noting the commitment of the applicant to the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS;(Option 1 )decides to appoint Mr Johan Heutinck as Chairperson of CEN/TC 154/SC 1 for a period of 6 years starting on 2017-06-02.The decision was taken by unanimity.- considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons;- noting the nomination by the Technical Committee Secretariat;- noting the commitment of the applicant to the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS;(Option 1 )decides to appoint Mr Mike Higgins as Chairperson of CEN/TC 154/SC 2 for a period of 6 years starting on 2017-06-02.The decision was taken by unanimity.- considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons;- noting the nomination by the Technical Committee Secretariat;- noting the commitment of the applicant to the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS;(Option 1 )decides to appoint Mr Mike Wharton as Chairperson of CEN/TC 154/SC 6 for a period of 6 years starting on 2017-06-02.The decision was taken by unanimity.7 CEN/TC 155Decision CEN/TC 155 1333/2017 taken on 2017-06-12CEN/TC 155 - Plastics piping systems and ducting systems

Subject: Adoption of a New Work Item having considered the proposal for a new work item as documented in CEN/TC 155 N 4668 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableA new project2. This item corresponds toCEN/TC 155/WG 17 - Rehabilitation of pipeline systems3. Document developed in drafting bodyPlastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes4. TitleThis document, read in conjunction with Part 1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground gas supply networks. It is applicable to polyethylene (PE) pipes of three different types: PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;PE pipes with co--- extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating;PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), see Annex A. In addition it covers:jointing of pipe lengths by means of butt fusion;fabricated and injection--- moulded fittings made of PE;5. ScopeOther: not addressed by CEN/TC 1556. Environmental aspectsOther: not applicable7. How do you plan to address these environmental aspects?Yes - Parallel ISO leadISO project reference: 11299-2ISO project ID: 70125ISO TC: ISO/TC 1388. Vienna AgreementNo document from another organization9. The project is linked toEnquiry + Formal Vote (ENQ+FV)10. TrackNo11. Related mandate(s)No12. Related directive(s)The following CEN members (at least five) are committed to participate in the development of the project:ASIBSIDINUNINEN13. CommitmentWeighted vote and simple majorityPercentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100Number of positive votes: 13Number of negative votes: 0Number of abstentions: 614. The decision was taken by8 CEN/TC 187Decision CEN/TC 187 02/2017 taken on 2017-06-07CEN/TC 187 - Refractory products and materialsDecision CEN/TC 187 03/2017 taken on 2017-06-07CEN/TC 187 - Refractory products and materialsDecision CEN/TC 187 04/2017 taken on 2017-06-07CEN/TC 187 - Refractory products and materialsDecision CEN/TC 187 05/2017 taken on 2017-06-07CEN/TC 187 - Refractory products and materialsDecision CEN/TC 187 06/2017 taken on 2017-06-07CEN/TC 187 - Refractory products and materials

Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher having received and agreed upon the reasons why harmonization is no longer needed; considering that the work item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following work item(s): WI 00187127 - Determination of shot content of High Temperature Insulation Wool (HTIW) productsand decides to release the standstill on these work item(s). The decision was taken by unanimity. Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher having received and agreed upon the reasons why harmonization is no longer needed; considering that the work item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following work item(s): WI 00187128 - Three point bend test for High Temperature Insulation Wool (HTIW) Boardsand decides to release the standstill on these work item(s). The decision was taken by unanimity. Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher having received and agreed upon the reasons why harmonization is no longer needed; considering that the work item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following work item(s): WI 00187129 - Determination of thermal conductivity of High Temperature Insulation Wool (HTIW) productsand decides to release the standstill on these work item(s). The decision was taken by unanimity. Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher having received and agreed upon the reasons why harmonization is no longer needed; considering that the work item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following work item(s): WI 00187130 - Determination of mean fibre diameter & fibre distribution of High Temperature Insulation Wools (HTIWs) by Scanning Electron Microscopy (SEM)and decides to release the standstill on these work item(s). The decision was taken by unanimity. Subject: Adoption of a Preliminary Work Item having considered the proposal for a new work item as documented in CEN/TC 187 N 528 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableThe revision of an ENEN 14945:20052. This item corresponds toCEN/TC 187/WG 4 - Chemical analysis3. Document developed in drafting bodyRefractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use4. TitleThis European Standard describes a method for the spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use. It is applicable to fired magnesia-chrome products (containing natural chromite, fused grain or co-clinker) and to unfired materials (with refractory cement or chemical bonds) although it is not to be restricted to these types of refractory. The method is applicable to concentrations up to 500 mg/kg of chromium (VI).This range may be extended or reduced by modifying the dilution factors.5. Scope6. Environmental aspects - OPTIONAL7. How do you plan to address these environmental aspects? - OPTIONALEnquiry + Formal Vote (ENQ+FV)8. TrackNo9. Related mandate(s)No10. Related directive(s)Simple majorityNumber of positive votes: 5Number of negative votes: 0Number of abstentions: 011. The decision was taken by9 CEN/TC 190Decision CEN/TC 190 16/2016 taken on 2016-11-23CEN/TC 190 Foundry technology

Subject: Adoption of a Preliminary Work Item having considered the proposal for a new work item as documented in CEN/TC 190 N 1049 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableThe revision of an ENEN 1559-1:20112. This item corresponds toCEN/TC 190/WG 1 - Technical conditions of delivery and cast material designation3. Document developed in drafting bodyFounding - Technical conditions of delivery - Part 1: General4. TitleThis part of EN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.This part of EN 1559 is not applicable to metallic castings for further reprocessing such as forging ingots and continuously cast billets and blooms.NOTE 1: Technical delivery conditions for copper alloy castings are specified in EN 1982.NOTE 2: Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN 1559-2 for cast steel; EN 1559-3 for cast iron; EN 1559-4 for cast aluminium; EN 1559-5 for cast magnesium; EN 1559-6 for cast zinc.5. ScopeNone of the above: This part of EN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.6. Environmental aspects - OPTIONALOther: Experts in the working group7. How do you plan to address these environmental aspects? - OPTIONALEnquiry + Formal Vote (ENQ+FV)8. TrackNo9. Related mandate(s)No10. Related directive(s)Simple majorityNumber of positive votes: 3Number of negative votes: 0Number of abstentions: 011. The decision was taken by10 CEN/TC 216Decision CEN/TC 216 13/2017 taken on 2017-05-16CEN/TC 216 Chemical disinfectants and antisepticsDecision CEN/TC 216 20/2017 taken on 2017-06-18CEN/TC 216 Chemical disinfectants and antiseptics

Subject: Adoption of a Preliminary Work Item having considered the proposal for a new work item as documented in CEN/TC 216 N 1077 having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS confirming that the new work item falls within its scope confirming that the new work item corresponds to real market needs confirming that the resources to complete the work below are available decides to register the work item described below in its active programme of work Details Section EN1. DeliverableA new project2. This item corresponds toCEN/TC 216/WG 3 - Food hygiene and domestic and institutional use3. Document developed in drafting bodyQuantitative surface test for the evaluation of residual antimicrobial (bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectants on hard non-porous surfaces. Test method4. TitleThis PAS specifies a test method for residual bactericidal and/or yeasticidal activity of liquid, chemical disinfectant products that are applied to hard, non-porous surfaces which are likely to undergo abrasive action. The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used in accordance with BS EN 13697:2001.5. ScopeIt has been designed as an extension of BS EN 13697:2001 and is intended to be used in conjunction with this recognized standard allowing BS EN 13697:2001 to assess the initial antimicrobial action of a product and PAS 2424 to assess the residual antimicrobial action. Therefore the results from this PAS will only be considered if the product tested also achieves a pass according to BS EN 13697:2001 (≥4 log reduction) under conditions required for the test product’s application of use (e.g. specified contact times, micro-organisms, organic load, etc.).It is applicable to ready-to-use products or dilute-to-use products that form a homogeneous, physically stable preparation when diluted with hard water.It is applicable to products that are used in areas that are covered in BS EN 13697:2001. This includes but is not limited to hard surfaces in the food industry, institutional areas such as schools, hospitals and nursing homes, in the workplace and in the home/domestic environment.It is not applicable to thickened or viscous products such as toilet bleaches or gels, wash-off products and products that are permanently bound to a surface.This PAS is designed for laboratories that perform antimicrobial testing in order to test the residual antimicrobial properties of liquid, chemical disinfectant products.NOTE 1 The sticky nature of thickened products and gels make the abrasion regime difficult to perform and therefore could lead to unreliable results.NOTE 2 The testing of wash-off products would require a method with the inclusion of a rinsing step.NOTE 3 Intrinsically antimicrobial surfaces are designed to remain active for longer than the 24 h covered in this test method.Discharges to soilEmissions to airUse of materialsUse of waterDischarges to waterWaste6. Environmental aspects - OPTIONALOther: EN 14885 forward + other statement if considered appropriate7. How do you plan to address these environmental aspects? - OPTIONALEnquiry + Formal Vote (ENQ+FV)8. TrackNo9. Related mandate(s)No10. Related directive(s)Simple majorityNumber o

delegated decisions cen · 2017. 7. 20. · uni nen 14. the decision was taken by ... it proves...

Documents