delta 13 - nucor skyline library/document... · teal tle 188 | engineeringncorsline.com delta 13...
TRANSCRIPT
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
Delta 13Steel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
60º-120º
B
A
• Designed for use in Larssen interlocks
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
A*
in(mm)
B*
in(mm)
Weight
lb/ft(kg/m)
~0.91~23.0
~0.63~16.0
8.8013.0
* Dimensions based on 90o corners
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
E 20Steel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
90º
A
B
A
in(mm)
B
in(mm)
Weight
lb/ft(kg/m)
~0.98~25.0
~0.98~25.0
11.0916.2
• Designed for use in Larssen interlocks
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
Omega 18Steel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
A*
in(mm)
B*
in(mm)
Weight
lb/ft(kg/m)
~2.97~75.0
~1.18~30.0
12.1018.0
* Dimensions based on 90o corners
A
B
90º-135º
• Designed for use in Larssen interlocks
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
E 22Steel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
A
in(mm)
B
in(mm)
C
in(mm)
Weight
lb/ft(kg/m)
1.9750.0
2.0151.1
1.2832.5
6.8710.0
A
B
C
Corner Joint Combined Walls
• Weld-on for T's, corners or pipes/combined walls
• Max Length 59.1 ft (18.0m)
• Designed for use in Larssen interlocks
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
B90º
A
Larssen TSteel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
ASTM A572 Gr. 60Domestic14.02 lb/ft
• Designed for use in Larssen interlock applications
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
A
in(mm)
B
in(mm)
2.07552.7
0.91423.2
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
1.6112”
ASTM A572 Gr. 50/608.95 lb/ft
• Designed to transition from Ball & Socket to Larrsen Interlocks
• Can Be Used in 8 Different Orientations
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
SKAPSteel Sheet Pile Connectors
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
SKCWSteel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
A
B
ASTM A572 Gr. 607.32 lb/ft
• Designed for use in Hook & Grip applications
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
A
in(mm)
B
in(mm)
1.5338.9
2.7569.9
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
A
in(mm)
B
in(mm)
C
in(mm)
4.09103.89
1.1027.94
2.0552.07
SKLC 90Steel Sheet Pile Connectors
Orientations
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
ASTM A 572 GR 608.5 lb/ft
• Designed for use with Larssen Interlocks (NZ/AZ) and most cold form sections
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
A
C
B
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
HP or WF0.96"
Pipe Pile
0.96"
SKPFSteel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
ASTM A572 Gr. 656.13 lb/ft
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
0.96"
PZ/PZC Pipe H-pile
• Combination Connectors: Designed for use with Pipe, H-pile & PZ/PZC Sheet Pile
• Weld-on Connectors
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
SKPMSteel Sheet Pile Connectors
ASTM A572 Gr. 656.13 lb/ft
HP or WF
1.26"
1.26"Pipe Pile
1.26"
• Combination Connectors: Designed for use with Pipe, H-pile & PZ/PZC Sheet Pile
• Weld-on Connectors
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
PZ/PZC Pipe H-pile
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
SKPTSteel Sheet Pile Connectors
Type 1 Type 2 Type 3 Type 4 Type 8Type 7Type 6Type 5
Type 9 Type 10 Type 11 Type 12 Type 16Type 15Type 14Type 13
Type 17 Type 18 Type 19 Type 20 Type 24Type 23Type 22Type 21
Type 25 Type 26 Type 27 Type 28 Type 32Type 31Type 30Type 29
Orientations
1.23"
1.40"
90º
2.16"
1.96"
1.80"1.80"2.16"
1.12"
ASTM A572 Gr. 6511.30 lb/ft
• Designed for use in Ball & Socket (PZ/PZC) Applications
• Can Be Used in 64 Different Orientations
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
Type 1 Type 2 Type 3 Type 4 Type 8Type 7Type 6Type 5
Type 9 Type 10 Type 11 Type 12 Type 16Type 15Type 14Type 13
Type 17 Type 18 Type 19 Type 20 Type 24Type 23Type 22Type 21
Type 25 Type 26 Type 27 Type 28 Type 32Type 31Type 30Type 29
Type 33 Type 34 Type 35 Type 36
Type 37
Type 41
Type 45
Type 38 Type 39 Type 40
Type 42 Type 43 Type 44
Type 46 Type 47 Type 48 Type 61
Type 57
Type 53
Type 49 Type 50 Type 51 Type 52
Type 54 Type 55 Type 56
Type 58 Type 59 Type 60
Type 62 Type 63 Type 64
Orientations
SKPTSteel Sheet Pile Connectors
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
135º
0.760"
0.259"
ASTM A572 Gr. 508.97 lb/ft
• Designed for use in Ball & Socket (PZ/PZC) Applications
• Can Be Used in 16 Different Orientations
Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8
Type 9 Type 10 Type 11 Type 12 Type 13 Type 14 Type 15 Type 16
Orientations
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
SKP45Steel Sheet Pile Connectors
Technical Hotline: 1-866-875-9546 | [email protected] www.nucorskyline.com
This drawing detail is subject to customer review and acceptance. Nucor Skyline is not responsible for this submittal. The detail and the information it contains is the property of Nucor Skyline and is not to be traced or copied, nor is the information contained to be misused in any way.
ATTACHMENT PROCEDURE1. Thread connector into interlock of sheet pile.2. Tack weld connector to pile.
Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8
Type 9 Type 10 Type 11 Type 12 Type 13 Type 14 Type 15 Type 16
Orientations
1.694"
90º
1.358"
ASTM A572 Gr. 509.08 lb/ft
• Designed for use with Ball & Socket (PZ/PZC) Applications
• Can Be Used in 16 Different Orientations
SKP90Steel Sheet Pile Connectors