delta profile rev2

35
Company Profile ISO 9001: 2000 ACSMA082 Copyright @ 2008 Delta Region Engineering. All rights reserve

Upload: others

Post on 09-Dec-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Company Profile

ISO 9001: 2000

ACSMA082

Copyright @ 2008 Delta Region Engineering. All rights reserve

2

Table of Contents

Contents

1. Introduction 2. Agent/Distributor

3. Quality Philosophy

4. Shop Inspection Procedure

5. HSE Policy

6. Company Information

7. Organization Chart

8. Well Head Control Panel (WHCP) procedures and

documentations

9. Previous Jobs Experience 10. Project Photographs 11. Letter of Appointment/Support 12. Standards and Approvals

3

1. Introduction

Delta-Region Engineering Sdn.Bhd. is an established oil and gas company that serves the oil, gas, petrochemical, mining and power industries in the Asia Pacific Region. We provide excellent services, solutions and a wide range of engineered products as well as after sales support to our clients.

Our priority is to ensure equipment integrity and customer satisfaction. This is delivered through strong relationships with our manufacturers and a high level of specialized local support. We have excellent track record of installation and support of the equipment range and have a proven ability to meet and exceed customer’s expectations. Our clients include major multinational operators and national oil companies such as Shell Sarawak Berhad, Shell Sabah Berhad, Shell China, Petronas, TOTAL Mynmar, Murphy Oil, MLNG, etc.

Being a service-oriented company, we place a strong emphasis in our customer needs and requirements. We always commit to provide our customers with the highest quality products and excellent service supports.

We deliver our products on time, with quality, at the right cost.

Our company has a group of experienced professionals in the oil and gas industries. They are supported by a team of experienced engineers and dedicated staff.

4

We are proud to be the agents/distributors for various reputable manufacturers worldwide for supplying valves, instrument panels, downhole tools, switchboard, gauges, flame arrestors, etc. We also have excellent contacts and business relationship with stockists and manufacturers who are capable to supply the following products /equipment to meet client's specification with competitive prices: - Mechanical pipe fittings - Seals, line pipes - Structural steel, beams and columns - Plates, rods and bars - Marine equipment - Rotating equipment Besides product sales and engineering services, we provide manpower to serve the oil and gas industries around the world. Our scope of manpower supply consists of engineers involved in Engineering, Procurement, Construction and Commissioning (EPCC) phases in projects and also includes other categories of skilled technicians, competent/certified workers and specialists such as E&I technicians, crane operators, production and maintenance crews, certified ASME welder, crews in well services, well completion, workover, well testing, drilling, marine operations, catering services and etc. Inline with our emphasis on quality of work, we are proud to be accredited with ISO 9001: 2000 by ACS Certification body since Jun 2008.

5

2. Agent/Distributor

Taylor Valve Technology, Inc. has been engineering and manufacturing world class products through creativity and innovation.

Taylor Valve products consist of safety relief valves, flow control valves/chokes, steam valves, vapor valves, regulators, level controllers and various pressure reading devices.

www.taylorvalve.com

Leeds Valve is the world leader in supplying butterfly valves for niche applications in oil and gas industrial. Valve types include swingclear, stepseat, low noise/anti cavitation, refractory lined, reduced port, twin disc and also more conventional low noise/ anti cavitation, high performance butterfly valve. www.leeds-valve.com

DFT has been making the in-line check valves for over 50 years. It started with a customer’s need for a small metal-seated check valve that could be installed in any position while providing tight shut-off. Today, DFT products range from a Basic Check® valve, Excalibur®

valve, DLC® valve, SCV® valve, GLC® valve, WLC® valve, PDC®

valve, HI-100 control valve, Ultra-Trol® control valve or Uniflo valve. www.dft-valves.com

Advanced Component Techonology is a well established supplier of electro-hydraulic actuators and hydraulic components to oil & gas, power generation, nuclear, marine, industrial, and mobile marketplaces throughout the world.

Besides actuators, ACT also provides brakes, gearboxes, motors and Kawasaki pumps. www.adcomtec.co.uk

We are proud to be agent/distributors for the following worldwide recognized manufacturers:

2. Agent/Distributor

CSI International, Inc. has been serving the process industry for over 35 years. CSI offers Reyco Safety Relief Valves (parts interchangeable with Lonergan) and Global Control Valves (parts interchangeable with Fisher).

In addition, CSI International also provides thermometer, thermocouple, pressure gauge and level switch

www.csiionline.com

China Xi'an Fengyang Petroleum Equipments Co.,Ltd (FYPE) specializes in the supply of a range of quality manufactured oilfield products . These include Downhole Tools , Petroleum Pipes, Wellhead Equipments, Drilling Rigs and Components as well as an extensive range of Mud Pumps. Additionally FYPE are able to offer: Stabilizer Forgings, Drill Collars, Kellys, Heavy Weight Drill Pipes, OCTG , Line Pipe and Casings.

http://www.fy-oilfield.com/

Nantong Strong World Fiber Reinforced Plastic Products Co., LTD. is a scientific enterprise specialized in manufacturing and developing molded frp grids, pultruded products and pultruded profiles. http://www.strongrate.com/strongrid/english/

Tenaga Kenari specializes in several types of Switchboard panel products, namely Main Switchboards, Sub-Switchboard, Distribution Board, AMF Control Panel, SESCO Metering Panel, Starter Control Panel, Water Treatment Control Panels and some other PLC Control Panels.

7

AMC design and fabricate engineering process equipment like pressure vessels, heat exchangers, filters & coalesces, heat recovery steam generator, storage tanks, scrubbers, chemical injection skids, other process and utilities skids in oil and gas, petrochemical and power industrial. http://www.amcsb.com.my

Severe Service Technology, Inc., is a premier manufacturer of metal and ceramic seated ball valves for severe and lethal environments. http://www.sstvalve.com/

Marco Specialty Steel, Inc. is a steel service center specializing in Wire Cloth, Perforated Metal, Expanded Metal, Bar Grating, Fiberglass Grating, Grip Strut® Saftey Grating, Perf-O Grip® Grating, GrateLock® Grating and Hex Metal. Marco Specialty Steel offer custom manufacturing and fabrication of all our products. http://www.marcospecialtysteel.com

Valveworks USA offers gate valves, bolt dual valve, ring gasket, ball valves and also wellhead products. All materials supplied by Valveworks forging and casting facilities are proven to meet the required quality specifications. All chemicals and physicals are quality assured. http://www.valveworksusa.com

2. Agent/Distributor

8

ATV provides flow control solutions to the most demanding requirements of the Oil & Gas upstream and downstream industry. ATV offers downstream and upstream products such as through conduit slab gate valve, through conduit double expending gate valve, top entry ball valve, swing check valve, Axial flow control valve, dual plate check valve, hydraulic actuators, rotary gate valve, rising stem ball valve, subsea valves,actuators and HIPPS. www.atvspa.com

Vanasa Multigas is specialized in designing, engineering,manufacturing, and servicing gas metering and measuring system. Vanasa Multigas design and manufacture gas metering stations, city gate stations and pressure reduction/regulation skids according to the clients’ requirements and industrial standards. Vanasa Multigas also offers filter separators, launchers and receivers, as well as indirect fired gas heaters for gas pipelines industrial.

2. Agent/Distributor

Corporation Win is specialized in the manufacture of pressure and vacuum relief valves and flame arrestors, as well as safety protection devices for liquid petroleum and petroleum products storage tanks, waste gas burning system for sewage treatment, nitrogen blanketing systems for automatic nitrogen sealing devices, explosive, venting systems, and other related products. http://www.corpwin.com/

AES was incorporated in 1987 with corporate headquarters, manufacturing and warehousing facilities located in Houston, Texas. AES products are certified to API 6A and API 6D, while their facilities is certified to API Q1.

AES valves are available in all ANSI and API pressure classes and virtually any metallurgy required.

http://www.aesvalves.com/

9

3. Quality philosophy

To deliver highest quality of work that meet clients’ requirements.

Always ensure the correct and up to date information is been used.

To liaise with client for joint inspection and joint acceptance.

Constantly instill quality awareness among employees.

Delta-Region always strives to achieve highest quality of works, without

compromising the health and safety of our staff, clients as well as

environments. We ensure our working environment is free of hazard.

10

4. Shop Inspection Procedure

Delta-Region is committed to deliver highest quality of works to customers. We have a comprehensive shop inspection procedure as attached below to govern the quality of materials to be purchased as well as inspection and testing plan.

1. SCOPE

The procedure outlines the execution procedure of quality control work for the equipment and materials to be purchased and fabricated for projects and covers required inspection and testing plan on the Project Procedure. 2. DEFINITIONS

Company shall mean Delta-Region Engineering Sdn Bhd. Contractor shall mean a registered business entity contracted to implement a project either as EPCC, an installer or otherwise specified. Vendor shall mean a firm / company who is awarded the contract to supply goods, services and material to the Company. Authorized Inspection Agency (AIA) shall mean the firm / company who is authorized by the company or its representatives to perform the inspection for certification purpose as per the company’s requirement

11

3. RESPONSIBILITIES

3.1 Local Inspection

All shop inspection for contractors, vendors, manufacturers will be managed and handled directly by the company. 3.2 Overseas Inspection

For overseas Vendors, basically all shop inspection shall be managed and handled by company’s office. However, for the critical equipment / materials, Contractor will appoint inspection agency in the country (or area) of the equipment / materials are being fabricated to perform the inspection activities on behalf of Contractor. The appointed inspection agency executes the inspection activities in accordance with the instruction given by the QC Representative of the Company. Company QC representative shall witness the testing should it be deemed necessary.

3.3 Contractor’s Inspection

Contractor’s inspection shall be performed by the Company’s engineer and / or inspector from appointed inspection agency.

4. PROCEDURE FOR INSPECTION

4.1 General

Contractor, Vendor and / or their Sub-vendors shall inspect the materials / equipment to be supplied at any time when necessary and in accordance

12

with the ‘List of Inspection Items’ as mentioned in requisition. Vendor shall ensure that the quality of materials/equipment comply with the requirements of purchase order, specifications and other related documents.

Company shall perform the adequate inspection and test to ensure that the equipment and materials conform to the requirements of the purchase order, specifications and other related documents and to maintain good quality and workmanship of materials and equipment.

For equipment and materials which are not covered by requirement of the ‘List of Inspection Item’ as mentioned on each requisition, Company will request Vendor to submit their standard inspection procedure and decide whether appointed inspector or representative will witness inspection and test after reviewing the document.

Company has the right to inspect materials and equipment being fabricated in accordance with the Inspection and Test Plan.

If any inspection shows that any materials and equipment have not been fabricated in accordance with the requirements of purchase order, specifications and other related documents, Vendor shall immediately correct the defects and shall repeat the inspection and / or test to prove that the defects have been eliminated. The extend of examination will be specified in Repair Procedure in which shall be prepared by Vendor and approved by Malaysian Inspector and COMPANY before commencement of repairing work.

13

4.2 Government Inspection

Company will assign Authorized Inspection Agency to implement Malaysian Government inspection in line with the country’s requirements.

Under the coordination of COMPANY, Authorized Inspection Agency shall be responsible for all inspection required by the rules and regulations of Malaysia. Basically, inspection that will be performed by approved authorities and / or Authorized Inspection Agency as specified under the country’s requirements.

4.3 Inspection and Test Plan (ITP)

Contractors and Vendor shall prepare ITP and submit it to Company. Then Contractor and vendors shall issue to COMPANY for comments and notification of their own inspection requirement (i.e. witness point, hold point, etc). Similarly, COMPANY shall submit ITP to client and Authorized Inspection Agency for comments and notifications of their own inspection requirements. COMPANY will forward the marked-up ITP to Contractor and vendor and a new ITP shall be forwarded to the company for resubmission.

4.4 Pre-Inspection Meeting (PIM)

Company will hold a pre-inspection meeting with Vendor for major equipment and materials in order to assure that Vendor’s quality control and inspection method conform to the requirement of the purchase order, specifications and other related documents and to maintain good quality and workmanship of equipment and materials and also to establish the

14

communications channel with Vendor.

Company will be notified of the PIM schedule and has the option to attend if considered necessary.

In the event that the equipment shall be certified by Authorized Inspection Agency, COMPANY shall notify Authorized Inspection Agency and Authorized Inspection Agency shall confirm whether they will attend the PIM.

4.5 INSPECTION APPLICATION FROM VENDOR

Vendor shall submit ‘Monthly Inspection Schedule’ to Contractor on the 27th day of each month for the coming next month inspection schedule.

Vendor shall submit ‘Application for Inspection’ to Company at least thirty (30) days prior to the actual inspection or test date for overseas inspection and sixteen (16) days in advance for domestic inspection. Vendor shall give final confirmation to Company at least seven (7) working days prior to actual inspection or test of overseas inspection and three (3) working days for domestic inspection.

When any change of inspection date occurs due to fabrication schedule, Vendor shall notify Contractor of the revised inspection date at least ten (10) working days in advance of any witness point in writing and such confirmation will be informed to COMPANY.

15

4.6 NOTICE OF INSPECTION SCHEDULE

COMPANY shall notify Authorized Inspection Agency for the inspection to be witnessed by Authorized Inspection Agency.

When Contractor / Vendor informs any change of inspection date after issuance of the ‘Monthly Inspection Schedule’, Contractor / Vendor will submit the above revised schedule to COMPANY immediately or within 2 days after confirmation of the new schedule.

4.7 NOTICE OF WITNESS INSPECTION FROM COMPANY

Company will inform Contractor / Vendor as well as Authorized Inspection Agency decision on which items COMPANY, and / or Authorized Inspection Agency will accompany Contractor’s/Vendor’s inspector on expected materials/equipment shop test as mentioned in this procedure.

If there is any change of inspection date as mentioned in this procedure, which occur due to the fabrications schedule, Contractor will inform COMPANY immediately and COMPANY will give short notice to the contractor within 3 working days. 4.8 INSPECTION AND TEST RECORD

Contractor / Vendor shall submit all inspection and / or test records to the company. Company will check the inspection and test records issued by Contractor / Vendor and will submit them to Client / End User for information.

16

5. HSE Policy It is a fundamental responsibility and commitment of the Delta-Region to provide and maintain a safe and healthy working environment for our staff, contractors and also clients. We will diligently comply with all provision of the Occupational Safety and Health Act, Regulations and approved codes of practice.

The objectives of our policy are to: ensure a healthy and safe working environment for all the employees clients and contractor personnel alike.

develop and enforce the use of safe working practices and provide training to employees.

investigate all unsafe practices, incidents and injury accidents. hold each manager accountable for the achievement of these objectives.

prevent negative impact to the environment.

In conducting the business activities, we will strive to prevent all occupational illness, accidents, injuries, and pollution to the environment.

Every employee of Delta-Region is actively involved and complements management responsibility by making suggestions for improvements. We strongly believe the application of sound safety and health practices for the protection of our people, clients and contractors is an essential ingredient in the overall success of our business.

17

6. Information of Company Registered Company Name : Delta-Region Engineering Sdn Bhd Registration Number : 405532-A Registered Office Address : Lot 2089, 1st Floor, Krokop Main Road, P.O.Box 678

98007 Miri, Sarawak. Telephone Number : +608 - 5410 626 (4 lines) Fax Number : +608 – 5411 679 Email Address : [email protected] Managing Director : Liew Fah Sin Banker : CIMB Bank Berhad Lot 507 &508 Block 9 Miri Concession Land District Jln Permaisuri, Miri, Sarawak. CAPITAL AUTHORISED CAPITAL : RM 500,000.00 PAID UP CAPITAL : RM 500,000.00

18

7. Organization Chart

Admin Assistant

ORGANIZATION CHART

DELTA REGION ENGINEERING SDN. BHD.

Accountant

Business Development Manager

Admin / HR Director

Agents / Distributors / Market Network

Managing Director

Secretary

Business Development Director

- Technical Support Engineer

- Sales Support Executive

- Expeditor

Sales Support Team

19

STRATEGIC ALLIANCES

EJ JOINT VENTURE SDN.BHD (M)

TENAGA KENARI

AMALGAMATED METAL CORPORATION

P&G ENERGY

EXACT AUTOMATION

DELTA REGION ENGINEERING

ASSOCIATE COMPANIESDISTRIBUTORS/AGENTS

PETRO SUTRA (BRUNEI)

FLO SOLUTION PTY (AUSTRALIA)

ALPHA GROUP; PROBITY

(THAILAND)

PT MAKS; EJJV

(INDONESIA)

LITEKON BUILTEK CORP; EJJV

(PHILIPPINES)

SUTRA ENGINEERING SDN..BHD.

20

8. WHCP Procedures & Documentation 1. WHCP Drawings We design and provide comprehensive WHCP drawing for clients to

review prior fabrication. Bill of material complete with actual make/model number is usually included for client’s perusal.

2. Components Certificates We provide certificates of compliance, test reports, from manufacturer or

recognized organization such as ASME for equipments used in the WHCP. These certificates copies are usually burnt in cd and send to client as part of Vendor Master Document List.

3. WHCP Operating Procedures

We provide WHCP operating procedures to client through conducting training by our experienced trainers.

4. Components Catalogues, Operating and Maintenance Manuals Together with BOM, we include components’ catalogues/datasheet for

clients to review prior procurement.

5. Factory Acceptance Test (FAT) Factory acceptance test procedures are written and given to clients for

review before the actual FAT kickoff. This also includes PRE FAT tests which clearly specify reservoirs preparation and filling, system tubing drains, system leak test, etc.

21

9. Previous Job Experience 9.1 Track Record of Supplying Solar Panel, WHCP, ICS, Fusible Loop Panel & Alarm System

No Client Project Description Supplied Date 1. Sarawak Shell Berhad

(Malaysia) Supply of WHCP for SFJT-B 20.08.2003

2. Sarawak Shell Berhad

(Malaysia) Supply of IGLO Solar Panel for SJJT-B 25.08.2003

3. Sarawak Shell Berhad

(Malaysia) Supply of IGLO Solar Panel for SJJT-B 25.08.2003

4. Sarawak Shell Berhad (Malaysia)

Supply of WHCP for SFJT-B Revisit Project

30.05.2003

5. Sarawak Shell Berhad

(Malaysia) Supply of (ICS) Instrumented Protective and Control System for SFJT-B

12.03.2003

6. Sarawak Shell Berhad

(Malaysia) Supply of ICS and Solar Power System for SJ-Rej. Phase 2

05.12.2003

7. Sarawak Shell Berhad

(Malaysia) Supply of ICS for BJJT-A 07.05.2003

8. Sarawak Shell Berhad

(Malaysia) Supply of Integrated SIMOPS Safety System for SJJT-B

07.05.2004

9. Sarawak Shell Berhad

(Malaysia) Supply of ICS & Solar Power System for SJJT-B Revisit 1

12.11.2004

10. Petronas Carigali

(Malaysia) Supply of SIPROD Alarm Panel for BAJT-H

12.12.2005

11. Petronas Carigali

(Malaysia) Supply of Fusible Plug Loop Panel for BAJT-H

12.12.2005

22

9.1 Track Record of Supplying Solar Panel, WHCP, ICS, Fusible Loop Panel & Alarm System No Client Product Description Date 12. Shell China, Changbei

(China) Supply of WHCP for ONSHORE Gas Plant

20.01.2006

13. Shell China, Changbei

(China) Supply of WHCP for Changbei Cluster 5,6, 14

03.05.2007

14. Petronas Carigali

Vietnam (Vietnam) Supply of WHCP for Pearl Development Platform

22.06.2008

9.2Track Record of Supplying Safety Relief Valve No Client Product Description Date 1. Sabah Shell Berhad

(Malaysia) 1/2" MNPT x 1" FNPT Safety Relief Valve

23.01.2003

2. Sabah Shell Berhad (Malaysia)

1" MNPT x 1.1/2" FNPT Safety Relief Valve

23.01.2003

3. Sabah Shell Berhad (Malaysia)

3/4" 150RFF x 1" 150RFF Safety Relief Valve

23.01.2003

4. Sabah Shell Berhad (Malaysia)

1" 300RFF x 2" 150 RFF Safety Relief Valve

23.01.2003

5. Sabah Shell Berhad (Malaysia)

1" 150# x 2" 150# Pilot Operated Safety Relief Valve

23.01.2003

6. Sabah Shell Berhad (Malaysia)

1" ANSI 150 RFT x 2" ANSI 150 RFT Taylor Safety Relief Valve

23.01.2003

7. Sarawak Shell Berhad (Malaysia)

1/2" x 1" 150# Safety Relief Valve 30.06.2004

8. Sabah Shell Berhad (Malaysia)

1 1/2" 150# x 1" 150# Safety Relief Valve

14.12.2004

9.

Sabah Shell Berhad (Malaysia)

4" 150# x 6" 150# Safety Relief Valve

25.02.2005

10. Sabah Shell Berhad (Malaysia)

1/2" 150# x 1" 150# Safety Relief Valve

18.04.2005

11. Sarawak Shell Berhad (Malaysia)

1 ½” 1500# x 2” 300# Pilot Relief Valve

06.06.2005

23

9.2Track Record of Supplying Safety Relief Valve Client Brand Project Location 12. PT. MULTI ANDAL

KARSA SELARAS (Indonesia)

1" 300 x 2" 150# Safety Relief Valve, Taylor Model 7800 Hard Seat

14.08.2007

13. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1 1/2" 300# x 2" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat

14.08.2007

14. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1" 300# x 2" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat

14.08.2007

15. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1 1/2 300# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat

14.08.2007

16. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

2" 150# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat

14.08.2007

17. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

3" 150# x 4" 150# Safety Relief Valve

14.08.2007

18. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1-1 1/2" 150# x 3" 150# Safety Relief Valve, Taylor Model 8200 Soft Seat

14.08.2007

19. PT. MULTI ANDAL KARSA SELARAS

1" 300# RFF x 2" 300# RF Pressure Relief Valve

14.12.2007

20. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1"300#RF x 2" 150# RF Pressure Safety Valve

11.12.2007

21. PT. MULTI ANDAL KARSA SELARAS (Indonesia)

1" 300# x 2" 150# Pressure Safety Valve

11.12.2007

22. OFFSHORE CPI SUPPLY (Malaysia)

1” Safety Relief Valve, Taylor Model 8200 Series

26.03.2008

23. TECHMACH (Malaysia) 1” 150# x 1” 150# Pressure Safety Relief Valve

05.06.2008

24. PETRONAS CARIGALI (Malaysia)

11/2” x 2” and 11/2” x 2 ½” Pressure Safety Valve

30.07.2008

24

9.3 Track Record of Supplying Control Valve Client Brand Project Location Date 1. Sarawak Shell Berhad

(Malaysia) Mitech North Sabah Field

08.08.2003

2. Sarawak Shell Berhad (Malaysia)

Mitech North Sabah Field

19.08.2003

3. Sabah Shell Berhad (Malaysia)

Valflo

North Sabah Field

01.10.2003

4. Sabah Shell Berhad (Malaysia)

Mitech P.MY.SJC.DF.02.001.T11231 Proj. Store MY02

14.10.2003

5. Sarawak Shell Berhad (Malaysia)

Valflo

North Sabah Field 16.12.2003

6. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 14.10.2003

7. Sarawak Shell Berhad (Malaysia)

Mitech North Sabah Field 27.02.2003

8. Sarawak Shell Berhad (Malaysia)

Valflo

North Sabah Field 15.03.2004

9. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 16.03.2004

10. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 8.06.2004

11. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 16.06.2004

12. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 07.07.2004

13. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 21.07.2004

14. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 16.08.2004

15. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 24.08.2004

16. Petronas Carigari Sdn.Bhd. (Malaysia)

Mitech North Sabah Field 15.09.2004

17. Sarawak Shell Berhad (Malaysia)

Valflo North Sabah Field 11.01.2005

18. Petronas Carigari Sdn.Bhd. (Malaysia)

Mitech Kemaman 2005

25

9.3 Track Record of Supplying Control Valve Client Brand Project Location Date 19. Shell China (China) Mitech Changbei 2005 20. Seri Dynamik

(Malaysia) Valflo Kemaman 22.01.2006

21. Seri Dynamik (Malaysia)

Mitech Kemaman 31.05.2006

22. Sarawak Shell Berhad (Malaysia)

Mitech Labuan 18.07.2006

23. MLNG (Malaysia) Mitech Bintulu 17.07.2006 24. Sarawak Shell Berhad

(Malaysia) Mitech Brooke Dockyard Kuching 20.02.2006

25. Sarawak Shell Berhad (Malaysia)

Mitech North Sabah Field 27.02.2006

26. Sarawak Shell Berhad (Malaysia)

Valflo Labuan 27.02.2006

27. PMSB (Malaysia) Mitech Labuan 27.11.2006 28. PMSB (Malaysia) Mitech Labuan 27.12.2006 29. MLNG (Malaysia) Mitech Bintulu 06.02.2007 30. Shell China (China) Mitech Changbei 30.05.2007 31. Ethylene Malaysia

(Malaysia) Mitech Kemaman 14.12.2007

32. Ethylene Malaysia (Malaysia)

Mitech Kemaman 02.01.2008

26

9.4 Track Record of Supplying Choke Valve Client Product Description Platform Date 1. Sarawak Shell

Berhad (Malaysia)

Electric Motor Actuator Angle Choke Valve

Sabah Shell KNDP-A- Kinabalu Duilling Platform

19.11.2002

2. Sabah Shell Berhad (Malaysia)

Pneumatically Operated Control Choke C/W Auto Drain Regulator & Piston Actuator

Labuan Spply Base (MY02)

09.05.2003

3. Sarawak Shell Berhad (Malaysia)

Choke Valve C/W Pneumatic Actuator

Labuan Spply Base (MY02)

27.05.2003

4. Sabah Shell Berhad (Malaysia)

Manual Angle Choke Valves

Labuan Spply Base (MY02)

15.09.2003

5. Sarawak Shell Berhad (Malaysia)

Electric Motor Actuator Angle Choke Valve

KNDP-A RD3- Kinabalu Drilling Platform

06.11.2003

6. Sarawak Shell Berhad (Malaysia)

Angle Choke Valve Package

E11 And F23 Rejuvenation Project

08.12.2003

7. Sabah Shell Berhad (Malaysia)

Taylor R4, Angle Body Regulant Choke Valve

MESPLI Kinabalu D.P.A.

02.03.2004

8. Brooke Dockyard (Malaysia)

Manual Angle Choke Valves

05.03.2004

9. Sarawak Shell Berhad (Malaysia)

Pneuamatic Piston Actuated Angle Choke Valve

Sarawak Shell E11 & F23

11.06.2004

10. Sabah Shell Berhad (Malaysia)

Choke Valve, Flanged North Sabah 96 PSC DF Production Facilities SJ Jacket A

14.09.2004

11. Sarawak Shell Berhad (Malaysia)

Flow Control Valve SSB Work Management Plant, Labuan

22.01.2007

12. Instrumentation, Valves & Fitting Sdn. Bhd. (Malaysia)

Taylor Choke Valve, Size: 2" x 900#

25.06.2007

13. Shell China (China) RTJ Flanged End Gate Valves, 2-9/16 5000#

Changbei Production Facilities

9.10.2007

14. Shell China (China) Taylor Choke Valves c/w Actuators

Changbei Production Facilities

24.04.2007

15. Shell China (China) Angle Choke c/w Actuator

Changbei Production Facilities

22.08.2007

27

9.4 Track Record of Supplying Choke Valve Client Product Description Platform Date 16. Shell China (China) DN 150 ANSI 1500#,

Angle Type Control Choke Valve c/w Actuator

Changbei Production Facilities

18.09.2007

17. Oil –Tech (Singapore)

Choke Valve c/w Actuator

Singapore 15.01.2008

18. Shell China (China)

Taylor Choke Valve, Size: 3" x 2" x 3" 600# RFF

Changbei Production Facilities

20.02.2008

19. Petronas Carigali (Malaysia)

Choke Valve 09.06.2008

28

10. Project Photographs

29

30

11. Letters of Appointment/Support

31

32

33

12. Standards and Approvals:

IEC 60079- Electrical Apparatus for Explosive Gas Atmospheres

IEC 60332- Test on electric cables under fire conditions

IEC 60529- Classification of Degree of protection Provide by Enclosures

IEEE – Institute of Electrical & Electronic Engineering

ISA – International Standard Automation NAS 1638 – Cleanliness Requirements of Parts

Used in Hydraulic Systems API RP 14B –Design, Installation & Operation of

Subsurface Safety Valve Systems API RP 14C –Analysis, Design, Installation &

Testing of Basic Surface Safety on Offshore Production Platforms

CSA – Canadian Standards Association UL – Underwriter Laboratory CENELEC – European Committee for Electro

technical Standardization NEMA – National Electrical Manufacturers

Association

34

35

The End