EPKE-O single-girder overhead travelling cranes

Rugged and excellent valueUncompromising

Now to

DIN EN 13001

3933

0-1

02

The previous DIN15018 crane standard has been replaced by European standard EN13001.

Make the right choice with EPKE-O, which already meets the requirements of this standard.

Are you looking for a crane solution that matches your standardised workshop architecture? A solution that can be supplied with a short lead time and which offers better value than the usual standard solutions? And which meets your demanding requirements in terms of quality, reliability and performance in full? Then the Demag EpKE-o single-girder overhead travelling crane is the right choice. Available as a crane or crane set.

TrIED aND TEsTED, uNcOMPrOMIsINg DEMag qualITy The top-connected rolled-profile girder offers optimum value with genuine Demag quality components for a wide range of options to choose from. EPKE-O cranes can be supplied as complete cranes or as crane sets, which only contain the main components. A crane set allows you to select your own crane girder.

Demag EPKE-O provides you with a crane installation that can be supplied more quickly, more easily and more cost-effectively to meet your application needs thanks to its basic design. Perfectly matching components, such as the new Demag DR-Com rope hoist, and tried-and-tested sub-assemblies give you the certainty of a long service life. They also offer the benefits of out-standing crane geometry, resulting in exceptional travel characteristics.

We have almost 200 years of experience in hoists and series crane production, as demonstrated by our installed base of 660,000 cranes and hoists.

yOur bENEfITs EPKE-O both as complete cranes or as crane sets (which do not include a crane bridge)

Excellent value as an alternative to cranes that have box-section girders

Additional safety thanks to derailment guard fitted as standard

High operating reliability thanks to components that have a long service life

Safe, reliable and rugged control system, either with an intelligent CAN bus processor system or with contactor control

Simple installation saves time on site thanks to prepared assemblies

Well connected at the top Safe, efficient and reliable operation down below

03

cONNEcTION Crane girder supported by end carriages Simple bolted connections Fast assembly Simple adjustment No special tools required Simple disassembly

Cross t

ravel:

max. 2

4 m/mi

n

DrIvE uNIT ZBL motor Integrated plug-in connection Demag quality A-type gearbox Minimum wear thanks to optimum matching flywheel design

Helical gearing

Connection plate between crane girder and end carriage for conventional bolted connection

Very smooth running charac-teristics thanks to tried-and-tested DRS wheel block system

Direct connection of optional accessories, e.g. buffers and/or guide rollers

DsE cONTrOl PENDaNT For cranes that have processor control

Standard display can also be used as diagnostics interface

Highly ergonomic designDrc raDIO cONTrOl sysTEM Hand-held transmitter Joystick control

DsT cONTrOl PENDaNT For cranes that have a contactor control system

craNE ElEcTrIc EquIPMENT Proven trailing cable arrangement for power supply and control pendant

Intelligent processor control (CAN bus) Conventional contactor control

04

load capacity 3.2 t 5 t 6.3 t 10 t 12.5 t

EKDr-Com 4/1 Com 4/1 - Com 4/1 -

Pro 4/1 Pro 4/1 Pro 4/1

span lkr up to 17.8 m

Long travel: max. 40 m/min

sIMPlE DEsIgN aND INsTallaTIONThe benefits resulting from the simple crane design and installation enable you to integrate EPKE-O flexibly into existing or planned buildings for optimum utilisation of the available space. This crane design offers you uncompromising quality, safety and reliability.

EPKE-O, the single-girder overhead travelling crane with a top-connected rolled-profile girder provides you with high-quality Demag engineering and excellent value. For the most demanding require-ments in terms of safety and reliability, based on decades of expertise in all aspects of crane design. High quality and maximum rigidity tough and ready to meet your daily operating needs.

EPKE-O: crane

yOur bENEfITs Girder length tailored to your needs for spans up to 17.8m

High-performance rope hoists in three sizes up to 12.5t

Conventional bolted connections instead of high-tensile bolts

No welding certificate required for rolled-profile girders in Europe

Compact cross-travel approach dimensions Optimum long-travel approach dimensions with 1,500 mm wheel base, the most compact design in its class

EKDr MONOraIl hOIsT Minimum approach dimensions thanks to compact design

Lifting speed: up to 12 m / min Load capacity: up to 12.5 t FEM/ISO up to 4m/M7

TyPE 2(suggested design for lower headroom dimensions)

TyPE 1(Standard)

05

Equipped for efficient crane production

If required, we can supply the structural calculation for the crane girder, which you can simply integrate into your documentation. This saves you time and makes it easy for you to co-ordinate delivery with your supplier.

lOcal PrOcurEMENT fasT DElIvEryThe opportunity to procure the crane girder locally and to install it direct on site, makes it possible to cut delivery times and save shipping costs. At the same time, you benefit from immediate availability. Crane manufacturers can easily integrate the newly developed crane set into their own steel super-structure. In short, our pre-assembled product packages provide for efficient crane production.

The EpKE-o crane set is the fastest solution offering the best value for a crane manufacturer to complete a crane. it contains all main components, from the drive and rope hoist to the electric equipment. You only have to add the appropriate crane girder. The EpKE-o crane set can be configured to meet individual needs to complete cranes and material handling systems.

EPKE-O: crane set

4107

0-6

4103

5

07

OvErvIEw 400 volt, 50 Hz operating voltage 230 volt control voltage, 48 volt processor control

DFW-S end carriages with top connection Complete travel units comprising Demag geared motors and DRS wheel blocks

Mobile control system and travelling hoist power supply (KBK25)

Clamped C-rail brackets for KBK25 Electric-travel EKDR rope hoist

fEaTurEs Load capacity up to 12.5 t Span up to 17.8 m Two-stage speeds for crane, crab and hoist unit Optional variable long-travel speeds Electric components

Contactor control Processor control IP 55 enclosure Ergonomic control pendant with emergency stop

Switchgear cabinet with safety switch

EPKE-O: crane set

yOur bENEfITs High safety standard Configurations to meet your specific needs Rolled-profile or box-section girder Local procurement of the crane girder Short delivery lead time Crane girder structural calculation, if required Proven Demag brand quality German engineering

Crane girder end plates

C-rail assembly

End carriage

Travel drive

Clamp-fitted buffer

08

Crane girder end plates

Control pendant or radio control

Crane girder *

Power supplyHoist power supply

End carriage

Travel drive

Clamp-fitted buffer

Travelling hoist electric equipment with lifting limit switch with overload protection

Crane electric equipment

* not included in the crane set

DEMag cONTrOl PENDaNTsDemag control pendants and radio controls feature an optimised ergonomic design for convenient operation.

3921

1-1

3958

9-3

3933

0-1

Travelling hoist with travel drive Clamp-fitted buffer

09

Dr rOPE hOIsT: PrOvEN aND ruggED Three sizes DR 3, DR 5, DR 10 Optimum approach dimen-sions thanks to compact travelling hoist design

Particularly long gearbox service life rated in FEM2m

Motor for smooth, low-vibration operation

Integrated drop stop and guide rollers

4-stage geared limit switch Overload protection Ergonomic, user-friendly bottom block simple handling thanks to two handle recesses and large hook with generous hook opening for convenient attachment of your load

DR-Com in FEM2m to double the service life

Dfw-s END carrIagEs: MINIMuM aPPrOach DIMENsION Crane end carriage with top-mounted arrangement of the crane girder and conventional bolted connection

Torsionally rigid, welded box-section girder, with diaphragm plates, computer-assisted design optimised for crane applications

Crane end carriage wheel base for extremely compact crane approach dimensions: 1,500, 2,000, 2,500 mm

Integrated derailment guard fitted as standard for additional safety

DrIvEs: PErfEcT MaTch Travel wheel diameter: 112, 125, 160 or 200 mm

Choice of travel wheel treads Wheel block with proven, high-precision pin connection (does not need to be re-aligned)

Wheel block can be moved in the axial direction (simplifies installation, flexible track gauge adjustment)

Tried-and-tested, comprehensive range of DRS accessories: buffers, horizontal guide rollers

High-performance ZBL long-travel motor in four sizes

Integrated plug-in connection Temperature monitoring

4098

6-46

3675

5

4103

1-7

4098

6-10

-2

10

Demag components:For the best crane

cONTrOl sysTEM: cONTacTOr Or PrOcEssOr cONTrOl Simple, conventional contactor control or processor/CAN bus control with dual-processor system

For contactor control: two-stage cross travel at 6/24 m/min, control via DST control pendant

For processor control (CAN bus): variable cross-travel speeds with inverter up to 24m/min

Dual processor control permits Operation under increased safety requirements (such as control category 3)

Fast access to operating data Rapid modification of parameters and settings

cONTrOl PENDaNT: OPTIONally wITh INfOrMaTION DIsPlay Ergonomic operation User-friendly design in various configurations with 7 or 9 operating elements

Information display as standard for processor control

Switching elements for two-stage or variable control

Convenient operation thanks to ergonomic housing design

High operating reliability thanks to additional strain relief elements

Optionally also available as radio control

Dcl-PrO POwEr suPPly lINE: INNOvaTIvE POwErfEED High profile section rigidity with a low deadweight

Reliable expansion compensation at each joint

Long service life thanks to optimised current collector trolley design

Up to seven conductors for rated currents up to 200A in continuous operation

Fast installation thanks to pre-assembled connection system

Precise attachment to C-section rails or by means of threaded pins

Easy to service: the system can be inspected at every joint, rapid replacement of straight sections

4100

0-1

3952

9-4

3921

1-1-

1

4079

8

4079

1-1

11

Wheel base ekt

Top edge ofcrane runway

brad

b

br

bschi

min

. 30

dia.

d

Travel wheel d

Configure the crane to meet your needs

PErfEcT PlaNNINg We have compiled the most important data you need to make it easier for you to plan your crane solution. Determine the parameters needed to configure your crane using the diagrams and the technical data for the DFW end carriage and the DR rope hoists.

DFW-S end carriage for EPKE-O single-girder overhead travelling cranes

crane end carriage wheel base ekt [mm]Travel wheel dia. d [mm]

brad [mm]

max. bschi [mm]

b [mm]

br [mm]

Dfw-s-E

112 /

1,5002,0002,500

112 47, 55, 60 (62)*

50

140 10

125 / 125 47, 55, 60 (62)* 150 12

160 / 160 47, 55, 60, 65 (67)*175

18

200 / 200 55, 60, 65 (67, 75)* 18

Profile section rail

craNE ruNway raIl

Flat steel rail Travel wheel tread

*hardened

12

Spurmittenma [mm]

Katzanfahrma 1 [mm] Katzanfahrma 2 [mm]

Tragfhigkeit [t]

Hak

enw

eg [m

]Steuerschalter

Steuerungselektrik Einschienenkatze EKDR-Com

Flur

ma

[mm

]

Kranseite1

Kranseite2

Track gauge [mm]

EKDR monorail hoist

Load capacity [t]

Hoo

k pa

th [m

]

Travelling hoist approach dimension 2 [mm]

Travelling hoist approach dimension 1 [mm]

Electric control equipment

Crane side 1

Crane side 2

Control pendant

Rail

heig

ht a

bove

floo

r [m

m]

Example for planning

Dr-cOM aND Dr-PrO rOPE hOIsT TEchNIcal DaTa

sizeLoad capacity

[t]Hook path

[m]Lifting speed

[m / min]

group of mechanisms

FEM / ISO

Load capacity [t]

Hook path [m]

Lifting speed [m / min]

Dr 3

2 / 1* 4 / 1*

1.0 12

20

30

12 / 2

4m / M7 2.0 6

10

15

4.5/0.8**6 / 1

1.25 3m / M6 2.5

1.6 2m / M5 3.2

Dr 5

2 / 1* 4 / 1*

1.612

20

30

12 / 2

4m / M7 3.26

10

15

4.5/0.8**6 / 1

2.0 3m / M6 4.0

2.5 2m / M5 5.0

3.2 9/1.5 1Am / M4 6.3 4.5/0.8

Dr 10

2 / 1* 4 / 1*

3.212

20

30

10 / 1.7

4m / M7 6.36

10

15

4/0.7**5 / 0.8

4.0 3m / M6 8.0

5.0 2m / M5 10.0

6.3 8/1.4 1Am / M4 12.5 4/0.7

Cross-travel speed: 6/24 m / min Flange width range: 200-410 mm

(for EKDR, EUDR monorail travelling hoists)

Voltage 400 V 230 volt control voltage,

48volt CAN bus

IP 55 enclosure * Reeving** DR-Com

13

Always at your service

PErfEcT PlaNNINg The advice and project engineering support provided by our crane experts addresses all aspects of your requirements to ensure that cranes and components are used efficiently throughout their entire life cycle. Involve us in your planning from the very beginning we can help you to obtain the optimum benefits from your investment layout.

sErvIcE TaIlOrED TO MEET yOur NEEDsThe need to achieve ergonomic, versatile and efficient in-house transport processes applies in all sectors of industry and in companies of all sizes. Decisive, however, is the optimum transport solution, which must be tailored to meet the special needs of your company. Only this will give you the certainty of maximum availability for your installation and long-term benefits from your investment and give you the competitive edge.

14

Do you have any questions about products or service for crane installations? Contact our professional sales and service engineers, who speak your language and can assist you from the very beginning to find the optimum solution to meet your needs. We are your professional partner for: Installation and commissioning Maintenance Repair and spare parts service Modernisation and refurbishment Inspections of load handling attachments and lifting accessories

yOur bENEfITs Maximum installation availability Highest possible degree of safety and reliability for the operator

Short response times thanks to our network of skilled service teams

Professional analysis & consulting provided by experienced engineers

Service for products supplied by all manufacturers

4081

1

15

4095

9-2

Demag cranes & components gmbH PO Box 67 58286 Wetter, Germany Phone: +49 (0) 2335 92-0 Fax: +49 (0) 2335 92-7676 Email: info@demagcranes.com

www.demagcranes.com

0813

EN

/GB

21

372

8 44

701

IS 1

00

no

liab

ility

fo

r er

rors

or

om

issi

on

s. s

ub

ject

to

ch

ang

e.

Prin

ted

in G

erm

any

DC

C/300

913/

7.5H

TErEx cOrPOraTION Terex corporation is one of the worlds leading suppliers of crane technology with Demag industrial cranes and crane components. The core competence of the Terex Material handling business group lies in the development, design and production of technically sophisticated cranes, hoists and components and the provision of sales support and services for these products. The business group manufactures in 16 countries on five continents and is present in more than 60 countries, reaching customers in more than 100 countries.