deng (industrial phd) at universiti putra malaysia · deng (industrial phd) at universiti putra...
TRANSCRIPT
Assoc Prof Dr Robiah Yunus (Program Coordinator)
Dr Makhfudzah Binti Mokhtar
Dr Syamsiah Binti Mashohor
DrShaiful Jahari b. Hashim
2
DEng (Industrial PhD)
atUNIVERSITI PUTRA MALAYSIA
3
INTRODUCTION
INTRODUCTION
Doctor of Engineering program (DEng)
is a PhD degree program developed,
delivered and quality assured by UPM.
The program emphasizes both on
industrial needs and the academic
requirements.
4
BENEFITS To provide a platform for professionals from industry to solve industrial
problems and simultaneously obtain a PhD degree.
To facilitate knowledge – sharing between UPM in developing new
technologies or solving real industrial problems
To strengthen R&D activities in industries
To provide a platform for a company to train competent researchers
To develop and/or promote Industry- University collaboration
To encourage technology transfers between University and industries
To attract international companies to establish research centers in
Malaysia
To keep abreast with the state of the art technology from industries
globally.
5
PhD vs. DEng
6
Criteria PhD DEng
Coursework 12-36 credits 24 credits
Comprehensive Exam yes yes
Research Project Supervisor from UPM
60 creditsSupervisor from UPM and industry
Scope forThesis Full fulfillment Full fulfillment
Thesis ExaminationThesis evaluationViva voce
Thesis evaluationViva voce
Admission RequirementMasterBacelor (first class)
Master with 3 yearsworking experience.Bacelor (min CGPA 2.75) with 10 yearsworking experience.
7
PROGRAM OBJECTIVES
PROGRAM OBJECTIVES
4. KAEDAH PENILAIAN
5. UGGI SCORE SHEET
6. KEPUTUSAN AUDIT
7. PERANAN SETIAP PTJ DALAM AUDIT
8. TARIKH-TARIKH PENTING
1. To provide professional graduates with profound knowledge in specific engineering fields
2. To produce professional graduates that have creative and innovative skills, as well as sensitive and responsible to society and environment
2. To develop professional graduates who are competent and able to lead engineering disciplines through services, researches and lifelong learning
3. To produce researchers who are able to solve industrial problems
8
9
CURICULUM STRUCTURE
CURICULUM STRUCTURE• The DEng is a mixed mode research- based program.
• Each student is required to take minimum 24 credit hours of courses
and 60 credit hours of research project.
• Student is also required to prepare a high quality thesis based on
findings/results of which provide solutions to industrial problems.
• Credit distribution of the program is presented in Table 1.
10
Course Category Total credit hours
Core Courses 12
Elective Courses 12
Research Project 60
Total 84
COMPULSORY COURSE
11
CODE Courses Credit
ECV5704 Engineering Business Management 3(3+0)
EPF5601 Applied Statistics And Probability For
Engineers
3(3+0)
EAS5701 Innovation In Engineering 3(3+0)
EAB5900 Research Methodology 3(3+0)
Total Credit 12
PROPOSED STUDY SCHEME
12
FIRST SEMESTER SECOND SEMESTER
CODE COURSE K S A CODE COURSE K S A
E****** Compulsory course 1 3 3 0 E****** Compulsory course 3 3 3 0
E****** Compulsory course 2 3 3 0 E****** Compulsory course 4 3 3 0
SPS6903 Seminar * 1 1 0 ECH6989 Project 12 0 12
ECH6989 Project 12 0 12
Total credit 18 6 12 Total credit 18 6 12
THIRD SEMESTER FOURTH SEMESTER
CODE COURSE K S A CODE COURSE K S A
E****** Elective course 1 3 3 0 E****** Elective course 3 3 3 0
E****** Elective course 2 3 3 0 E****** Elective course 4 3 3 0
ECH6989 Project 12 0 12 ECH6989 Project 12 0 12
Total credit 18 6 12 Total credit 18 6 12
FIFTH SEMESTER
K – credit hour, S – Lecture, A – lab
CODE COURSE K S A
ECH6989 Project 12 0 12
Total credit 12 0 12
13
DURATION AND
METHOD OF STUDY
DURATION AND METHOD OF STUDY
Minimum of 2½ years (5 semesters), maximum of 5 years (10 semesters).
UPM offers programs only in full time mode.
Courses are conducted through lectures, seminar, and presentation.
Lectures will be held either after office hour or weekend or in modular mode.
Research project will be carried out as follows;
Student is required to submit a project proposal based on industrial problem and must
be approved by both UPM and industry.
The research must be carried out at company site/designated premise and not at
UPM.
Project supervision involves supervisors from faculty and industry. UPM Supervisor
must also supervise the student at his workplace and this will require the supervisor to
visit the student regularly.
The industry must have suitable staff who are deemed eligible by UPM to supervise
the student
The industry must provide adequate research facilities for the student to conduct
research effectively.14
15
FIELDS OF STUDY
FIELDS OF STUDY
16
17
ADMISSION
REQUIREMENT
ADMISSION REQUIREMENT
18
Type of Degree CGPA Minimum years of
experience in related
industry
Master Degree in
Engineering
- 3
Master Degree in Science - 5
Bachelor Degree in
Engineering
> 3.75/First Class
Honours
3
3.51 - 3.74 5
3.26 - 3.50 7
2.75 - 3.25 10
19
TUITION FEES
TUTION FEES
20
No. of Semester 5 6 7 8 9 10
Total Fees (RM) 44,100 45,950 47,800 49,650 51,500 53,350
Fee per semester
(RM)8,820 7,658 6,829 6,206 5,722 5,335
21
MOHE - MyBrain15
PhD Industri
MYBRAIN 15
22
• Program MyBrain15 adalah salah satu program agenda kritikal
di bawah Pelan Strategik Pengajian Tinggi Negara (PSPTN).
Matlamat program adalah untuk mewujudkan kelompok
sumber manusia yang berpengetahuan tinggi sebagai
pemangkin kepada penyelidikan dan inovasi. Ini adalah
penting bagi memastikan usaha Kerajaan untuk menjadikan
pembangunan ekonomi berteraskan inovasi dapat dicapai
dengan jayanya. Di bawah program ini, Kerajaan
mensasarkan untuk mencapai sebanyak 60,000 pemegang
PhD di kalangan rakyat Malaysia. Program yang ditawarkan
oleh Kementerian Pengajian Tinggi adalah seperti berikut:
23
Name:
Age:
Gender:
Company:
Title:
Department:
Hire Date:
Year(s) of Experience in related field:
Job Scope:
Date MOU signed/Potential Date :
Highest Academic Qualification (Year):
CGPA:Study
Field:
Graduated University/Institution:
2nd Highest Academic Qualification (Year):
CGPA:Study
Field:
Graduated University/Institution:
University:
Discipline:
Project Title:
Sypnosis, Objective & Methodology of the Project (not more than 100 words):
Project Expected Outcome/Contribution to the Industry (not more than 60 words):
Download and fill GS01a form, and send your completed
form together with the supporting documents to:The Dean
School of Graduate Studies
Universiti Putra Malaysia
43400 UPM Serdang
Selangor, Malaysia
Tel: 03-89464201
For more information, please contact
Deputy Dean
Research and Post Graduate Studies
Division, Faculty of Engineering, 43400
UPM Serdang, Universiti Putra Malaysia,
Selangor Darul Ehsan. Malaysia.
Tel : 03-8946 6266/6253, Fax : 03-8656
7103, Email: [email protected]
Or
Assoc Prof Dr Robiah Yunus
Program Coordinator for DEng
Faculty of Engineering, 43400 UPM
Serdang, Universiti Putra Malaysia,
Selangor Darul Ehsan. Malaysia.
Tel : 03-89467531/6261, Fax : 03-8656
7006, Email: [email protected]