density 1.7 pcf – densidad 1.7 pcf olylam · density / densidad width - anchor astm d 3575-00...
TRANSCRIPT
DENSITY 1.7 PCF – DENSIDAD 1.7 PCF
IDENTIFICATION/ IDENTIFICACIÓN:Each plank must have the following information:Las placas deben presentar la siguiente información:
* Product Description / Descripción del producto* Production shift/ Turno de Fabricación* Laminator / Laminadora* Operator initials / Iniciales del Operador
STORAGE/ ALMACENAMIENTO:Storage must be at a ventilated area at room temperature, indoors and stacked in bulk.El almacenamiento debe ser en un lugar ventilado a temperatura ambiente, protegido de la intemperie, estibado a granel.
DESCRIPTION/ DESCRIPCIÓN:Polyethylene foam laminated plank / Placa laminada de Polietileno Espumado.
APPLICATIONS/ APLICACIONES:Variety of packages / Empaques diversos.
MATERIAL:Low Density Polyethylene / Polietileno de baja densidad.
PRODUCTION PROCESS/ PROCESO DE FABRICACIÓN:Extruded / Extrusión.
PACKAGING / EMBALAJE:Bulk / Granel.
GENERAL DIMENSIONS / DIMENSIONES GENERALES:
www.polyglobal.com.mxCarretera México-Toluca 5324, Col. El Yaqui. | Del. Cuajimalpa de Morelos | C.P. 05320 | México, D.F. Tel. 52 (55) 52.55.60.00 | Fax. 52 (55) 5250 8527 | Us PH: (281) 5761611
The data presented for this product are for unfabricated Polyglobal brand polyethylene foam products. While values shown are typical of the product, they should not be construed as specification limits. Esta hoja técnica tiene el único propósito de informar. No podemos aceptar ningún tipo de reponsabilidad ya que no podemos controlar las condiciones en las que el material es utilizado; ningun tipo de garantia esta expresado en estos resultados. This technical data sheet is intended only to be informative. We cannot accept any responsibility for the conditions under which the material is used since it is not in our control; no warranty is expressed or implied in any way with these results.
olyglobal ®
olylam®
TECHNICAL DATA SHEET - FICHA TÉCNICA
Physical Properties - Propiedades físicas 1
Nominal Thickness - Espesor
Test Method - Método de Prueba
Units - Unidad de medida D - 1.7
Density / Densidad
Width - Anchor
ASTM D 3575-00 Suffix W
Flexometer - Flexómetro
Flexometer - Flexómetro
Method 3005 FED STD 101None - Ninguna
Length - Longitud
in
cm 5
2"
in
cm 121
48”
in
cm
ASTM D 3575-00 Suffix L
ASTM D 3575-00 Suffix D
ASTM D 3576
ASTM D 3575-00 Suffix S
lb / ft 2 < 0.2
274
108”
lb/in 2 @ 25%
lb/in 2 @ 50% 14
6 - 8
mm 2
in 2 0.011 máx
% < 5
7.5 máx.
pcf
kg / m 31.7 +/- 10%
27.2 +/- 10%
Contact Corrosivity -Corrosividad al contacto
Water Absorption - Absorción de agua
Compressive Strength - Fuerza a la
Compresión @ 10%
Cell Size - Tamaño de Celda
Thermal Stability - Estabilidad Térmica available colors mint and white -
colores disponibles menta y blanco