department of mechanical engineering 1 2 3

S.NO Title of the Paper Name of the Authors Name of the Journal ISSN Number

1

Classification of healthcare data using hybridised fuzzy and

convolutionalneuralnetwork

Balamurugan Ramasamy&Abdul

Zubar Hameed

Healthcare Technology Letters 2053-3713

2

Mechanochemical synthesis and sintering of AlCrFeNiZn high

entrophy alloy

R. Kamalakannana, G.N. Ganesan, J.

Selvaganesan, K. Gowtham,

B.Dheenathayalan

AIP Conference Proceedings 1551-7616

3

Wear Characterization of Ceramic Tools (SiAlON andAl2O3+SiC

Whisker) With Dry and Wet Turning of Nimonic 75

R. Sivakumar, M. Prasanna,

K.Pradeep,T. Rajkumar,

S. Raj kumar


4

Numerical analysis of composite layeredballistic plate made of

boron carbide,titanium diboride and ultra high

molecularweight polyethylene

S.Nandhakumar, P.P.Sethusundaram,

G.N.Ganeshan


5

Wear behaviour on composite of aluminium 6063 alloy with silicon carbide and granite by stir casting

method

L.Emmanual , L.Ragunath ,

T.Karthikeyan


6

Planning and Optimization Using of Flexible Manufactruing System With Petrinet to Hybrid Algorithm

R.Kirubagharan, R. Vijayakumar

International Journal of Emerging Trends

in Science and Technology

2349-7866

7

Optimization of Machining Parameters on

Surface Roughness and MRR in Drilling AISI

429 Steel Using Response Surface Method

N.Parthipan, M. Illangkumaran


inScience and Technology

2349-7866

8

Surface wetability effects on boiling heat transfer

T. Nithyanandam, D. Senthil Kumar,

K. Aravinth, V. Ajith


9

Selection of WEDM parameters to measure the performance and

productivity of die steel grade D3 using GRA and fuzzy logic system

Sandeep Kumar, S.Dhanabalan

Grey Systems: Theory and Application

2043-9377

Department of Mechanical EngineeringList of Journal Publications Academic Year 2019 - 2020

10

Application of ANFIS for the selection of Optimal wire -EDM parameters while machining Ti-

6Al-4V Alloy and Multi - Parametric Optimization using

GRA Method

Sandeep Kumar, S.Dhanabalan,

C.S.Narayanana

International Journal of Decision Support System Technology

1941-6296

11

Form tolerances investigation in EDM process for super alloys using multiple holes electrodes

S.Dhanabalan, K. Sivakumar,

C.Sathiya Narayanan

International Journal of Engineering & Material Science

0971-4588

12

Experimental Investigation of Critical Heat Flux on Sio2 Thin

flim deposited copper substrate in di water at atomospheric pressure

Nithyanandam Thangavelu, Senthil kumar Duraisamy

Thermal Science 0354-9836

13

Structural optimization of railway station platform by providing minimum number of columns

Kamalakannan Ramalingam,

G.N.Ganeshan, M.Shunmugasundaram,P Sivakumar, S

Nagarajan

Paideuma Journal 0090-5674

14

Tribological Behavior of AA7050-ZrSiO4 Composites Synthesized

by Stir Casting Technique

S. Sakthivelu, M.

Meignanamoorthy, M. Ravichandran,

and P. P. Sethusundaram

Mechanics and Materials 2354-0192

15

Design , Manufacture and sustainable analysis of

biodegaradable computer mouse using solidworks and 3D Printer

G.N.Ganeshan, R.Kamalakanna,

S.Vijay

Materials Today Proceedings 2214-7853

16

Impact of Fuel injection pressure in diesel

fuelled engine using biodiesel flammable and non flammable gas

in mixed fuel mod

S.Gopalakrishanan and R.Karthick


17Reinforcement of jute, net and

epoxy compositeM.Karthe and

R.ManivelMaterials Today

Proceedings 2214-7853

18

Fabrication and Testing of Composite Leaf spring using

carbon, glass and aramid fibre

T.Keerthivasan, S.M.Sibi,

C.Tamilselvan


19

Heuristic and Metaheuristic algorithm for solving medium and

large scale sized cellular manufacturing system NP hard

problems: Acomprehensive Review

V.Kesavan, R.Kamalakannan,

Sudhakara Pandian, P.Sivakumar


20

Optimization of drilling parameters in AISI SS317L stainless steel material using

Taguchi Methodology

C.Manickam and N.Parthipan


21Boat Type oil recovery skimmer R.Manivel and

R.SivakumarMaterials Today


22Desalination of water using

parabolic tough collectorS.Rajanarayanan

and S.VijayMaterials Today


23

Tensile strength analysis serially pinned joined in eglass composite

plates

A.Naveenraj and R.Karthick and

P.Baskaran


24

Tribological and mechanical properties of AA6061 Reinforced

with Sic and graphite for automobile applications

S.Padmavathy , R.Kamalakannan and Manikandan


25Design and fabrication of multi

purpose PIT digger machineR.Karthick and

S.GopalakrishnanMaterials Today


26

Evaluvation of mechanical properties

of plamfibre / glass fibre and epoxy combined hybrid composite

laminates

K.Raju and M.Balakrishnan


27

Analysis of overall equipment effective ness of a PEM

MAMMEK panel processing machine

R.Sivakumar and R.Manivel


28

Analysis of mechanical properties of gas tungsten arc welded

dissimilaraluminum alloy AL2024 and

AL6063

S.Vijay, S.Rajanaryanan,

and G.N.Ganeshan


29

Quasi static analysis of continuum beam of nickel

titanium alloy and on approach to solve dynamic analysis of

continuum robot using large deflection method and domain

decompositionmethod

Sabarainathan, M.Vijay and

R.Kamalakannan


30

Stability analysis of heat transfer hybrid/ water nanofluids

P.C.Mukeshkumar and K.Palanisamy,

P.Vijayan


31

Evaluation and selection of suppliers using TOPSIS

R.Kamalakannan, C.Ramesh,

M.Shunmugasundaram, P.Sivakumar,Amir Mohamed


32

Characterisation of Mechanical Behavior in Aminosilane Surface

modified nano Silicon Natural Kenaf and Glass Fiber

Reinforcement of Epoxy HybridComposite material

N.Parthipan, R.Charan,

A.Athithyan, S.Manoj Kumar

Paideuma Journal 0090-5674

33

Experimental study and analysis of operating parameters in wire

EDM process of aluminium metal matrix

composites

K.Raju,M.Balakrishnan


34

Green Computing Process and its Optimization Using Machine

Learning Algorithm in Healthcare Sector

A.H.Zubar, R.Balamurugan

Mobile Network and Applications 1572-8153

35

Implementation of lean tools and techniques in a connecting rod

manufacturing industry

R.Balamurugan, R.Kirubagharan,

C.Ramesh


36

An interactive approach towards the development of portable laser

cutting machine

R.Vijayakumar, C.Ramesh,T.Ezhila

rasan, P. Praveenkumar, R.

Ram Mohan


37

Investigation on automobile wheel rim aluminium 6061 and 6066

Alloys using ANSYS WORKBENCH

R.Vijayakumar, C.Rames,

R.Boobesh, R.Ramasurya,

P.Sounderrajesh


38

Microstructure and mechanical properties of Cu/RHA composites

fabricated by friction stir processing

S.Saravanakumar, S.Gopalakrishnan,

K.Kalaiselvan, K.B.Prakash


39

Investigation on Al2024 with Si3N4 and AlN composites using

friction stir processing

H.Vinothkumar, S.Saravanakumar,

C.Ramesh, P.Prakash, A.Ragul Vignesh,S.Naveen


40

A conceptual approach for developing industry 4.0 learning

factory for Indian SMEs

M.Mohanprasad, S.Vijay,S.M.Suthar

san


41

Productivity enhancement and waste management through lean

philosophy in Indian manufacturing industry

S.M.Sutharsan, M.Mohanprasad,

S.Vijay


42

A framework for lean manufacturing implementation in

Indian textile industry

M.Mohanprasad, J.M.Dhiyaneswari, S.Ridzwanjuljamaa

n,S.Mythreyan, S.M.Sutharsan


43

Development of AA6082 based metal matrix composite using Sic,Ti,Ni,Cr by conventional

casting technique

C.Mohanraj, K.M.Naveenkumar, K.Praveenkumar,

S.Mukesh


44

Effect of combined exhaust gas recirculation and retarded

injection timing on diesel engine operated distilled waste plastic oil

blend

Mohanraj Chandran, Ramesh Chinnappan, Chun

kit Ang

Energy Sources, Part A: Recovery,

Utilization, and Environmental

Effects

1556-7036

45

The Impact of Job Performance Due to JobDemands

Dr.C.Ramesh, Dr.P. Vanitha

Dr.P.Venkateswari

International Journal of Psychosocial Rehabilitation

1475-7192

46

Simultaneous Scheduling of Assembly andProduction Shops

Using GA based Heuristic

S.Saravanakumar, M.Muthukannan,

S.Srinivasan,P.Sankar Kannan

International Journal of Psychosocial Rehabilitation

1475-7192

47

Perception and Problems faced by Google Pay Users

Dr.P.Vanitha,Dr.C.Ramesh,

Dr.P.Venakateswari,

Dr.P.Atchayabala

StudiaRosenthaliana 1781-7838

48

A Study on Difficulties faced by Working Women in their Daily

Life

Dr.P.Vanitha, Dr. C.Ramesh StudiaRosenthaliana 1781-7838

49

Design and Analysis of Ship Propeller Using Cfd

C.Ramesh, R.Kamalakannan,

Mr.T.Gokulakrishnan,Mr.S.Hari hara

sudhan,Mr.G. Karthikeyan


50

Design And Fabrication of Magnetic

Cushioning System in Seats

S.Gopalakrishnan, R.Karthick,

P.S.Shridharan, R.Kavin, P.Srikanth


51

Design and Analysis of Split Chamber

Vacuum Refrigeration by usingCfd

T.Keerthivasan, M.T.Tineshbabu,

V.Vignesh,R.Vinoth


52

Comparative analysis of FSW, TIGW and LBW

techniques on AA8011with Optimization of FSW

parameters by Taguchi Technique

Selvaraj Govindaraj,C.Moha

nrajStudiaRosenthaliana 1781-7838

53

Theoretical study to improve the life of feed

roller in drum chipper

Mrs.S.Padmavathy, Mr.S.Kalaimukilan,

Mr.D.Dinesh, Mr.R.Dhayallan


54

Surface Modification of Aluminium Reinforced With

Sodium Diboride by Friction Stir Processing

S.Saravanakumar,K.B. Prakash

,P.Gokul,S.Dhanabal,

V.Naveenkumar


55

Fabrication Of Selflubricatingcomposite By

UsingCaf2

R.Manivel,J.Vinothkumar,

R.Pranesh,R.Surya


56

Quality Improvement by parameter optimization in laser

cutting of aluminium alloy

S.Dhanabalan, R.Sathishkumar,

P.Ragu,S.C.Yeswanth


57

Optimization of process parameters of stainless steel410 by tungsten carbide tool

inserts

L.Emmanual, T.Karthikeyan,

A.Oviya, J.R.Venkateshkuma

r,R.Chinnapa


58

Wear Properties Assessment test on Sustainable and Non

Sustainable Polymers using Pin onDisc Apparatus

Mr.G.N.Ganeshan, R.Kamalakannan, S.Nandhakumar


59

Investigation of surface treated kenaf fibre on

epoxy hybrid composites: strength perspective

N.Parthipan,S.Renjith, S.Venkadesh,

P.SubramaniStudiaRosenthaliana 1781-7838

60

Design and Analysis of Solar Electric Vehicle

A.Naveenraj, E.T.Divyia Venkat, S.Senthilmurugan,B.M.Shunmugasun

daram


61

Genetic Algorithm Approach to Optimization of

Milling Parameters of Al 7075 alloy

A.Maria Jackson, M.Kulasekarapandi

, P.DineshStudiaRosenthaliana 1781-7838

62

Multi Spindle Flexible & 360° Drilling machines

R.Manivel, R.AjayVasan,

S.Eniyan,M.Sivaprakash


63

Heat Transfer Analysis of a Helically Coiled Heat Exchanger

usingMwcnt/Water Nanofluid

K.Palanisamy, P.C.Mukeshkumar StudiaRosenthaliana 1781-7838

64

CFD Analysis of Geometrical Changes in Adiabatic Section of

CylindricalHeat Pipe

R.Balamurugan, C.Mohanraj, S.Singaravel

P.Dineshkumar, R.Deepak


65

Theoretical Analysis of Vapour Compression

Refrigeration with Blend of R1234yf and R744

L.Ragunath, L.Emmanual,

R.Dhamodharan,S.Dhanish,N.Gokul


66

Modelling And Simulation of Deep Drawing Cups on Aa1050,

Common Brass, Gi40 using Finite Element Analysis

M.Ranjithkumar,N.Satheesh,

S.Kumaresh, S.Vinodh


67

Experimental Investigation of Characterization of bio oil from pyrolysis of Electronic Wastes

S.Saravanakumar, Ganesh Moorthy Muthukannan,

Deepan chakaravarthy,Ram

kumarSundar


68

Investigation of combustion analysis of Algae with DME is

blended with diesel in CI Engine

M.Karthe, A.Naveenraj StudiaRosenthaliana 1781-7838

69

Fabrication & Characterization of Al6061/AlN composites

for Heat Transfer Applications

A.Manivannan,S.Vimal raj,N.Balaji,M.Yogesh kumar


70

Productivity Improvement through Lean Techniques in Indian Textile

Industry

Mr.M.Mohanprasad,Dr.C .Ramesh,

Mr.C.T Ajai Pranav,

Mr.S.Gowhtam,Mr.M.Prakash raja


71

Fabrication and Testing of Mechanical Properties of

GLARE and CARLL

S.Raja Narayanan, V.Vinoth Kumar, S.Balakrishnan,

P.Vignesh


72

Skewness and kurtosis investigation on AISI

420 using turning

M.Ranjith Kumar, U.Kirubakaran,

V.Vinoth kumar,R .Vimal


73

Investigation on Mechanical Properties of

Aluminium 6061 Metal matrix with Boron Carbide and Graphite

S.Vijay,S.Sutharsan,

M.Mohan PrasadStudiaRosenthaliana 1781-7838

74

Thermal Effect of A Polymer Matrix Material By Using

Phthalates

V.Kesavan, L.Emmanual StudiaRosenthaliana 1781-7838

75

The Mixture of Calcium Chloride, Barium Chloride and Zirconium Oxide as A Catalyst In Catalytic

Converter

M.Karthe ,E.Jagadeesh, S.Karthick,

S.Maheswaran


76

Mathematical Analysis of Imaging System to Determine the Factors

Affecting the Image QualityK.Karthiga,

Dr.R.Balamurugan StudiaRosenthaliana 1781-7838

77

Analysis of springback and bend power of galvanized iron sheet in

V-Die Bending Phase

S.Saravanakumar, S.Srinivasan,

M.Muthukannan,P.Sankar Kannan


78

Optimized Battery Thermal Management System in Electric

Vehicle

P.P.Sethusundaram,N.Jeeva,

J.Pradeepkumar,S.Praveenkumar


79

Mechanical and Tribological properties of TiAlN /WC-C multilayer coating on CNC

Cutting tool inserts

R.Karthi, S.Gopalakrishnan, L.Suriya Prakash

,C. Anantha Logesh,M.Ragul


80

Experimental analysis of dissimilar metal of copper and

brass plates fabricated friction stir welding

S.Saravanakumar,H.Vinothkumar,B.Allan Franklin,

M.Saravanan,Jeeva siddharth


81

Investigation on effects of flux assisted GTAW welding process

on mechanical, metallurgical characteristics of dissimilar metals

SS 304 and SS 316 L

H.Vinothkumar,M.Balakrishnan,K.Gulanthaivel,R.Logeshwaran,

R.Mohanraj


82

Examination of Electrical Discharge Machining of AA2014 Amalgam With Al2O3 by Fuzzy

Logic

S.Padmavathy,R.Akhil,

S.BharathRaj,S.T.Abhinesh



2348-9480

83

Optimization of machining parameters of super alloy 2205

byWC inserts

L.Emmanual,T.Karthikeyan,M.Sakthivel,S.Kishore,K.Harish


84

Design and analysis of erosion in electrochemical machining tool

T.Keerthivasan,P.Kaushik,

P.Mirunalini,J.Surendhiran


85

Auto detecting signal using sensor in hair-pin bends for

heavyvehicles

S.Padmavathy,T.Ranjith,M.Prakash,

S.T.Gowtham


86

A lot streaming based flow shop scheduling problem using

simulated annealing algorithm

C.Ramesh,R.Kamalakannan,

R.Karthik,C.Pavin


87

A modern emerge for Automatic Car Cover

R.Kamalakannan,G.R.Kishorekumar,

S.Gnanasurya,R.Manoj,M.Harihar

an

High Technology Letters 1006-6748

88

Effect & Thermal Investigation of Alumina & Graphite particles inAA6061 composites by two-step

stir casting process

A.Manivannan,R.Sasikumar,

C.Ramesh,R.Kamalakannan


89

Performance improvement of ventilation fan assembly using

solidWorks

L.Ragunath,C.Monish,

S.Badrinathan,M.Vishnukumar


90

Ergonomic Factors Analyzing of Pressing Workstation with RULA

H.Vinothkumar, Dr.A.Sivakumar High Technology

Letters 1006-6748

91

Optimization of machining parameters in aluminium zircon metal matrix composite using

WEDM

K.Raju,M.Balakrishnan High Technology

Letters 1006-6748

92

Advanced Drilling Machine

R.Manivel,R.Sivakumar,

C.RameshJournal of Xidian

University 1001-2400

93

Enactment of Conventional Machine Learning Algorithmsfor Predicting CFBC Cyclone

Separator Performance

Dr.M.Vijayakumar,Karthikeyan

Subramanian,N.Prasanna,

S.Ajay


in Engineering Research

2347-3983

94

Analysis of Performance Using IDE Frame Work

Dr.M.Vijayakumar,N.Prasanna,M.Kishanth


in Engineering Research

2347-3983

95

Design and analysis ofMagetrostrictive material

S.Gopalakrishnan, T.Manoj Kumar,

K.M.Muraliprasath,A.T.Lalith ravi

Studia Rosenthaliana 1781-7838

96

Life cycle assesment analysis of biodegradable

Plastics by using lca tool

S.Nandhakumar,G.N.Ganeshan,

R.Kamalakannan Studia Rosenthaliana 1781-7838

97

Experimental Study on Titania nanocoated surfaces in boiling

heat transfer at atmospheric pressure

T.Nithyanandham,T.Mithulkirthick,

E.Hariharan,K.Venkatesan

Studia Rosenthaliana 1781-7838

98

Mechanical and tribological properties of multilayer coated

tungsten carbideinsert with nano lubricant in CNC

turning

R.Karthick,S.Vijay Studia Rosenthaliana 1781-7838

99

Diversion of Cover Shower Water of Back Water Plant in Paper

Industry

S.Rajanarayanan,M.Boobalan,N.S.Ragul,

R.Rakul DravidStudia Rosenthaliana 1781-7838

100

Influence of friction stir welding parameter on metallurgical and

Mechanical properties of dissimiliar

Al2024-al7075 aluminium alloys

Mr.S.Vijay,Dr.M.Balakrishnan,

Mr.R.Karthick Studia Rosenthaliana 1781-7838

101

Friction Weldability of Al 2024 + Li + Si3N4 Metal Matrix

Composite

M.Balakrishnan,K.Raju

Metallography, Microstructure and

Analysis2192-9262

102

Evaluation of DI engine operations at dual mode: biogas

from Tapioca sagosludged poultry manure and tire

oil blends

S.Kesavan,R.Sasikumar,C.Mohanraj

Indian Journal of Geo Marine Sciences 0975-1033

103

Numerical simulation of diesel engine using waste plastic oil

blends

Mohanraj Chandran,

Senthilkumar Tamilkolundu,Chandrasekar Murugesan

Springer Nature Applied Sciences 2523-3971

104

Effect of nano cerium oxide additive with tire oil blends on diesel engine combustion and

emissions parameters with soot morphology analysis

Mohanraj Chandran,Ramesh

Chinnappan,N.Parthipan,

Chun Kit Ang

Energy Sources, Part A: Recovery,

Utilization, And Environmental

Effects1556-7036

105

Productivity and quality improvement by optimization of milling parameters of super alloy

A.Maria Jackson,N.Baskar,

R.Sabarish,S.Mohan Raj,

A.Annis Ahamed


106

Process and analysis with demographic methodological

refinement of bus body industry

Sivakumar Annamalai, Bagathsingh Nagarajan ,

H.VinothKumar , S.Saravanakumar


107

Analysis of lean manufacturing layout in a textile industry

Sivakumar Annamalai, H. Vinoth Kumar,

Bagathsingh Nagarajan


108

Effect of surface wettability and surface roughness on SiO2 and copper hybrid thin-film-coated surfaces for nucleate boiling

performance

Thangavelu Nithyanandam; D.

Senthil Kumar

Heat Transfer Research 10642285

109

Mechanical, wear, and drop load impact behavior of glass/Caryota urens hybridized fiber‐reinforced nanoclay/SiC toughened epoxy

multihybrid composite

S. C. Prasanna, Raju P. Raja K. Lingadurai K., T.

Maridurai

Polymer Composites 1548-0569

110

Dry Sliding Wear Behavior of Aluminum Metal Matrix

Composite Reinforced with Lithium and Silicon Nitride

Raju K. & Balakrishnan M. Silicon 1876-990X

111

Experimental Investigation and Analysis of Properties and Dry

SlidingWear Behavior of Al -Fe-Si Alloy

Matrix Composites

P. P. Sethusundaram, S.

Sakthivelu, M. Ravichandran, M. Meignanamoorthy

Silicon 1876-990X

112

Experimental Investigation of Tensile Strength of Fiber

Reinforced Polyester by Using Chicken Feather Fiber

Loganathan, S. Dinesh , V. Vijayan, M.

Ranjithkumar, S. Rajkumar

Journal of New Materials for

Electrochemical Systems

1480-2422

113

Investigation of mechanical behaviour on composites of Al6063 alloy with silicon,

graphite and fly ash

Loganathan M., Dinesh S., Vijayan V., Karuppusamy T., Rajkumar S.

Journal of New Materials for

Electrochemical Systems

1480-2422

114

Comparative studies and analysis on gasification of coconut shells

and corn cobs in a perforated fixed bed downdraft reactor by admitting air through equally

spaced conduits

Mohanasutan S., Arun K., Venkata

Ramanan M.

Biomass Conversion and Biorefinery 2190-6815

115

Optimization on machining parameters of friction surfacing of

SS304 over iron plate

Sethusundaram P.P., Sakthivelu S.,

Selwin M., Meignanamoorthy M., Kumar S.D., Alagarsamy S.V.

Materials Today: Proceedings 2214-7853

116

Prediction of optimum electric discharge machining parameters

for AA7075-SiC composites

Sethusundaram P.P.,Sakthivelu S., Meignanamoorthy M., Kumar S.D., Chanakyan C.,

Alagarsamy S.V.


117

Threshold algorithm for the cell formation problem

Kamalakannan R., Raguraman T.R.,

Sudhakara Pandian R.

International Journal of Advanced Intelligence Paradigms

1755-0386

118

Material synthesis, characterization and performance measurement of laser drilling for

stir casted CuNi-Tib2 metal matrix

Parthipan N., Ilangkumaran M.


119

Response surface methodology based on polyamide incorporated with biolubricant for optimisation of operating parameters in heavy

vehicles

Karthikeyan T., Narendran J.

International Journal of Heavy Vehicle

Systems1744-232X

120

Investigation of Multiphase Heat transfer by Surface Modification

Technique

Nithyanandam T., Senthil Kumar D., Aravind Kumaran S., Ajit Aravind K.


121

TPGS-mediated one-pot synthesis, XRD structural analysis, antimicrobial

evaluation and molecular docking of novel heterocycles as potential inhibitors

of p53-MDM2 protein

Vijayakumar.K,K.Anand, Tricia Naicker,Sooraj

Baijnath,Malose J. Mphahlele, Naresh

Kumar Katari, Sizwe J. Zamisa, C. Balakumar,

Subramanian Palanisamy,

Muthupandian Saravanan, P. Boomi,

Anil Chuturgoon

Journal of Molecular Structure 0022-2860

122

Synthesis, Characterization and the anti HIV1 behavior of some Novel Clubbed Benzimidazole derivatives approaches

Vijayakumar.K,Geetha S

Research Journal of Pharmacy and Technology 0974-3618

123

Biosynthesis, characterization of silver nanoparticles and antimicrobial screening

by Oscillatoria Annae

S. Geetha, K. Vijayakumar,

K.R. Aranganayagam G.Thiruneelakandan


124

The Positive And Negative Impacts Of Incomplete Family In John Irving’s The

World According To GARP

M.Madhu Bharathi, D.Naganandhini, J.Dineshkumar

Journal of Critical 2394-5125

125

Analyzation of fuzzy queueing performance measures by the L-R method with Erlang service model

Maheswari.S,S.Narayanamoorthy,

A. Anuja, J. V. Brainy,

Daekook Kang

AIP Conference Proceedings 0094-243X

126

Glucose-insulin regulatory model using Runge Kutta method of order four

Maheswari.S,S.Narayanamoorthy,

Reetha Thomas AIP Conference Proceedings 0094-243X

127

Defuzzification Formula for Modelling and Scheduling A Furniture Fuzzy

Project Network

Maheswari.S,M.Shalini,

T.L.Yookesh

International Journal of Engineering and

Advanced Technology2249 – 8958

128

Mathematical Analysis of Imaging System to Determine the Factors

Affecting the Image Quality Karthiga.K,Dr.R.Balamurugan

Studia Rosenthaliana (Journal for the study of

Research)1781-7838

129

Material Selection Model Using Spherical Dombi Fuzzy

Graph Approach

P. Karthicka, K. Nivethitha, S. Sowmiya

Materials today proceedings 2214-7853

130

The three-dimensional diamond fuzzy sets and their cut sets

Balamurugan.P,Venkatachalam.A

Advances and Applications in

Mathematical Sciences0974-6803

131

Pattern Classification of Continued Fractions With Square Number as Base

P.Balamurugan,A.Venkatachalam Journal of Physics:

Conference Series 1742-6596

132A Mixed Objective Assignment Problem

Abdul Razak Kachu Mohideen,Ramesh.P

Journal of Physics: Conference Series 1742-6596

133

Exploration of physicochemical properties of 4-methoxy acetanilide: A

nonlinear optical crystal

Guruprasad.L,G. Bhuvaneswari,

N. Prabavathi

Journal of Theoretical and Computational Chemistry 0219-6336

134

Theoretical studies on 3-bromo-2-methoxybenzonitrile using density

functional theory

N.Y. Sugirtha Suni, L. Guru Prasad, C. Brintha Malar, Arockiasamy Ajay

Praveenkumar,R. Ganapathi Raman



1

Optimization of WEDM process parameters using standard

deviation and MOORA method

A. Muniappan, Justin Arockiya

Raj, V. Jeyakumar,

R.Shunmuga Prakash,

R.Sathyaraj

Material Science and Engineering 1757-899X

Academic Year 2018 - 2019

2

Microwave Shielding, Dieelectric and Magnetic Behaviour of

MWCNT/Fe3O4, Pro-Hybrid Nano Oxides Reinforced Natural

Rubber Composite in E,F,I&J Band Frequencies.

C.Ramesh, S.C.Prasanna&T.M

aridurai

Digest Journal of Nano Materials and

Biostructures1842 -3582

3

Effects of nano-copper additive on performance, combustion and

emission characteristics of Calophylluminophyllum biodiesel

in CI engine

A.Tamilvanan,K.Balamurugan,

&M.Vijayakumar

Journal of Thermal Analysis and Calorimetry

1588-2926

4

A Simulated annealing for the cell formation problem with ratio level

data

R. Kamalakannan, R. Sudhakara Pandian, P. Sivakumar

International Journal of Enterprise

Network Management

1748-1260

5

An integrated approach to performance measurement

analysis, improvements, and knowledge management in health

care sector

Balamurugan.R, Abdul Zubar

International journal of knowledge

management studies1743-8276

6

Application of ANFIS and GRA for multi-objective optimization of

optimal wire-EDM parameters while machining Ti–6Al–4V alloy

Sandeep Kumar, S.Dhanabalan, Narayanan C.S

SN Applied Sciences 2523-3963

7

Analysis of Micro-hole Fabrication in Laser Drilling of

Titanium Grade 5

S.Dhanabalan, C .Ramesh,

M.Loganathan



2348-9480

8

Investigation of Surface roughness and material removal rate on

machining of TIB2 Reinforced Aluminium 6063 composites: A

Taguchi’s Approach

L.Emmanual, T.Karthikeyan

Mechanics and Mechanical Engineering

2354-0192

9

Effect of Silane Treated Silicon (IV) Oxide Nanoparticle Addition on Mechanical, Impact Damage and Drilling Characteristics of KenafFibre-Reinforced Epoxy

Composite

N.Parthipan, M.Ilankumaran,

T.Maridurai, S.C.Prasanna

Silicon 1876-9918

10

Effects by Various Cross Sections on Monoshocks Helical Spring

Using Static Stress Analysis and Sustainable Analysis

Ganeshan.GN, Kamalakannan.R, Sivakumar ,Tan

koon Tatt , Kasirajan

International Journal of Engineering &

Technology2227-524X

11

Experimental investigation on convective heat transfer and

pressure drop of cone helically coiled tube heat exchanger using

carbon nanotubes/water nanofluids

K.C.Palanisamy, P.C.Mukesh Kumar Heliyon 2405-8440

12

Fetal Ultrasound Image Evaluation of Chromosomal

Anomaly Detection and Classification Using

Conditional Rooted Neural Network (CRNN)

S.Padmavathy and P.Suresh

Journal of Medical Imaging and Health

Informatics2156-7026

13

Heat Transfer Enhancement in Mini Compact Heat Exchanger by

using Alumina Nanofluid

V.Vijayan, S.Saravanan,

A.Godwin Antony, M.Loganathan and

S.Baskar

International Journal of Mechanical

Engineering and Technology

0976-6359

14

Analysis of Wear Behaviour of Aluminium Composite with silicon carbide and titatnium

reinforcement

A.GodwinAntony, V.Vijayan,

S.Saravanan,S.Baskar and

M.Loganathan



0976-6359

15

Synthesis of Sio2 Nano particles by using sol-gel route

S.Saravanan, V.Vijayan,

A.Godwin Antony, M.Loganathan,

S.Baskar



0976-6359

16

Performance and emission characteristics of compression-

ignition engine handling biodiesel blends with electronic fumigation

M.Vijayakumar and P.C.Mukeshkumar Heliyon 2405-8440

17

Theoretical Approach of Benzamide Derivative using

Hartree Fock MethodGeetha.S,N.Sumathi

International Journal of Pure and Applied

Mathematics1314 -3395

18

A Need Based Syllabus for Non Technical Learners

Subha.S,K.Abirami,

M.Ambikavathy,M.K.Durgamani,N.S.Yoganantha

Rao

Indian Journal of Science and Technology

0974-6846

19

Some Fixed Points Theorems in Generalized metric space using

Triangular Fuzzy Numbers

Veeramalai.G,M.Prabakaran

International Journal of Engineering ,

Science and Mathematics

2320-0294

20

Pattern Classification of Continued Fractions with

Triangular Number as BaseBalamurugan.P,

Gnanam.AInternational Journal of Pure and Applied

Mathematics 1311-8080

21Gaussian Pell Number Balamurugan.P,

Gnanam.A

International Journal of Engineering and Technology(UAE)

2227-524X

22

Pattern Classilfication of Continued Fractios with Centered

Pollygonal Number as BaseBalamurugan.P,

Gnanam.AInternational Journal of Management, IT

and Engineering 2249-0558

23

Effect of Sonication on Certain Antiepileptic Drugs: Approach to

Drug Delivery Mechanism Through Perfluorocarbon

Natchimuthu.V,S.Ravi,

J.AmorosAsian Journal of

Chemistry 0970-7077


1

Dry Sliding Wear Characteristics Of Heat Treated And

Surface Modified Hematite Particles-Epoxy Particulate

Composite

C. Ramesh,C.ManickamT.Maridurai

V.R.Arun prakash

Revista Română de Materiale / Romanian Journal of Materials

1583-3186

2

Heat Transfer Enhancement and Pressure Drop Analysis

of a Cone Helical Coiled Tube Heat Exchanger using

MWCNT/Water Nanofluid

K. Palanisamy,P.C.Mukesh kumar

Journal of Applied Fluid Mechanics 1735-3645

3

Performance Enhancement and Emissions Analysis of

Diesel Engine with Biodiesel, N-Propanol and

1-Butanol Blend

M. Vijayakumar ,P.C.Mukesh kumar

Journal of Applied Fluid Mechanic 1735-3645

4

Fabrication Of Metal Matrix Composite For Brake Drum-A

Characteristic Study Of Tribological Properties

Manikandan.A ,N.Parthiban

International Journal of Mechanical and

Production Engineering Research

and Development

2249-8001

5

Design And Analysis Of Roller Shafts For Sugar Cane Mills By

Using Fea Technique With Different Parameters

R.R.Karthi,L.Emmanual



and Development

2249-8001


6

Study Of Corrosion Behaviour On Tig And Friction Stir Welded

Joints Of Aa6061-T4

S.Nishanth,S.G.Arul selvan



and Development

2249-8001

7

Multi-Parametric Optimization Of Edm Parameters For Hexagonal

Profile Cu Electrode To Measure Form Tolerance On Ni-Based

Super Alloy

Subramani.P, S.Dhanabalan



and Development

2249-8001

8

Investigations On The Emissioncharacteristics Of Diesel Engine Blende With Jatropha Oil

And Di Methyl EtherKathe.M,Manivel.R



and Development

2249-8001

9

A Review Of Aluminium Alloy Metal Matrix Composites And Its

Industrial Application

Manivel.R,M.Karthe



and Development

2249-8001

10

Experimental Investigation On Mechanical Properties Of Aisi

316l Ss Weldment By Using Gtaw Process

Keerthi Vasan.T, K.Kumaravel



and Development

2249-8001

11

Multi Objective Optimization For Drilling Process Stresses In Ss317

Material

Parthipan.N,C.Manickam



and Development

2249-8001

12

Wettability Analysis On Copper Substrate By Emery Abrasion And

Copper Nano Coating

T.Nithyanandam,K.Palanisamy



and Development

2249-8001

13

Fabrication And Evaluation Of Mechanical Behaviours Of Metal

Matrix Composite For Brake Drum

Padmavathy.S, K.Chirstal



and Development

2249-8001

14

Experimental Investigation On Convective Heat Transfer And Pressure Drop In Vertical And

Horizontal Helically Coiled Tube Heat Exchanger Using Mwcnt/

Water Nanofluid

K. PalanisamyT.Nithyanandam



and Development

2249-8001

15

Preparation Of Al6061-Sic- Bagasse Ash Mmc,S By Using

Stir Casting Method And Evaluation Microstructural, Mechanical Properties And

Numerical Analysis

S.C.Prasanna,T.Tamil Selvan



and Development

2249-8001

16

Performance Measures, Analysis And Improvements In Healthcare

Sector By Implementing Tqm Tools And Techniques

Balamurugan.RR.Vijayakumar



and Development

2249-8001

17

Study The Comparison Of Wear Characterization Al6061/ Red Soil And Al6061/ Granite Dust Based Metal Matrix Composite Material

R.VijayakumarR.Balamurugan



and Development

2249-8001

18

Optimization Of Wire-Cut Edm Process Parameters For Ss304

Using Design Of Experiment

Ragunath.L,Vignesh.D



and Development

2249-8001

19

Experimental Optimization On Delamination During Fabrication Of Glare Fiber Metal Laminates

Raja Narayanan.S,Sathyamoorthy.G



and Development

2249-8001

20

Investigation On Mechanical Properties Of Hybrid Aluminium

Metal Matrix Composite Reinforced Sawdust Ash And Sic

Raju.K,Jothiprakash.P



and Development

2249-8001

21

Experimental Analysis Of Delamination Failure In Jute-Coir

Fiber Reinforced Composites

G.Sathyamoorthy,Raja Narayanan .S



and Development

2249-8001

22

Optimization Of Grinding Parameters In Austenitic Stainless

Steel Aisi 317l Using Taguchi Method

Sivaraman.B,Sivakumar.R



and Development

2249-8001

23

Review On The Effect Of Nanofiller Addition On The

Technical Properties Of Polymers

T.Tamil Selvan,Prasanna S.C



and Development

2249-8001

24

Experimental Investigation Of The Performance Of Internal Combustion Engine By

Water/Methanol Injection

Velavan.R,Vignesh.C



and Development

2249-8001

25

Investigation On Performance And Emission Behaviour Of A Single Cylinder Diesel Engine

Fueled With Mixture Of Coconut Oil And Pongamiaoil Biodiesel

Blends Along With Diesel

D.Vignesh, Ragunath.L



and Development

2249-8001

26

Investigation Of Al 5383 Composite With Al2o3 And

Graphite For Marine ApplicationsVignesh.C, R.Velavan



and Development

2249-8001

27

Characterization Of Palmyra Fiber And Polyester Resins Composite

R.Karthick , S.Gopalakrishnan



and Development

2249-8001

28

Scheduling And Optimisation Using In Flexible Manufactruing

System Using Petrinet To Increase Utilisation Of Resourse System

Kirubagharan.R, Naveenraj.A



and Development

2249-8001

29

Parametric Optimisation Of Wire Edm Of Heat Treated En8 Steel

Using Taguchi Technique

S. Sathishkumar, S.Nandhakumar



and Development

2249-8001

30

Investigation On Startup Of A Small Horizontal Axis Wind

Turbine

S.G.Arul Selvan, S.Nishanth



and Development

2249-8001

31

Fabrication And Evaluation Of Mechanical Properties Of

Bermuda Grass Root Fiber/Polyester Composites

Christal.K, S.Padmavathy



and Development

2249-8001

32

Thermo Gravimetric Analysis Of Phoenix Sp. Fiber

Emmanual. L,Karthi R.R



and Development

2249-8001

33

Investigation Of Machining Parameters By Using Pvd Coated Tialn Insert And Aldura Coated

Insert On Aisi D2 Steel

Jothiprakash.P,Raju.K



and Development

2249-8001

34

Experimental Study On A Spark Ignitio Engine Fuelled With Petrol

And N-Butanol Blends

P.Baskaran,Naveenraj.A



and Development

2249-8001

35

Hybrid Optimization Of Wedm Parameters To Predict The

Influence On Surface Roughness And Cutting Speed For Ni-Based Inconel 600 Wrought Superalloy

Sandeep Kumar,Subramani .P



and Development

2249-8001

36

Synthesis of Metal Matrix Composites through Stir Casting

Process– a Review

S. Sakthivelu P.P.Sethusundaram,Meignanamoorthy

M.Ravichandran


1428-1511

37

Optimization of Machining Variables in Electric Discharge

MachiningUsing Stainless Steel 317 in Full

Factorial Method

S. NandhakumarS.Sathishkumar,

K.Sakthivelu


1428-1511

38

Optimization of Machining Parameters in EDM Using SS317 in Full Factorial Method

Shanmugar Pragash.R

Nandhakumar .S,Sathishkumar S



2348-9480

39

Microstructure and mechanical properties study on aluminum metal matrix composites with boron nitride by friction stir

welding

Karthikeyan T., Selvaraj G.

Journal of Computational and

Theoretical Nanoscience

1546-1955

40

Synthesis, Characterization, and Evaluation of Cancer Prevention

Activity of Novel Modified Heterocyclic Compounds

Vijayakumar.K,Sountharrajan.S,

Suganya.E

Asian Pacific Journal of Cancer Prevention 1513-7368

41

Forecasting Enrollment using Fuzzy Time Series

Abdul Razak.K,Ramesh.P


Mathematics1311-8080

42

Interval Valued Gaussian Quadrature Two Point Formula for Solving Integral Equations,

Veeramalai.G,Venkatachalam.A



43

The Role of a BCC Alloy for Hydrogen Storage

Pari. CN. Mohan

Journal of Materials Science and

Nanomaterials0974-2115

44

N-Step Adam Bashforth Method for Describing R.K-Method for

Solving 2nd Order Ordinary Differential Equations

Dhanapal.M,A.Arul Dass




1

Reduction of Components in New Family of Diode Clamp Multilevel

Inverter Ordeal to Induction Motor

Rathinam Angamuthu, Karthikeyan

Thangavelu,Ramani Kannan

Journal of Semiconductor Technology and Science (Anna

University Annexure I)

2233-4866

2

Heat Transfer Improvement in Radiator by Effect of Different

Walls Emissivity

M. Kalidass, S. Nandhakumar

International Journal of Research in

Advanced Technology

2456-2769

3

Heat Transfer Augmentation in Double Pipe Heat Exchanger by

Using Aloevera With Ethylglycol

M. Kalidass, K. Sharmiladevi


Advanced Technology

2456-2769

4

Bio Diesel Preparationand Blending of Fuel With Diesel by

Using Waste Sunflower Oil

K. C. Keerthivasan, M. Kalidass,

S. Nandhakumar


Advanced Technology

2321-9637

5

Selection of Low Cost Sensible Heat Storage Material for

Domestic SWH Storage Tank

Dr.P. P. Sethusundharam,

N. Prasanna, M. Vijayakumar

Journal of Advances in Chemistry 2321 - 807X

6

Ergonomically Designed and Fabricated Industrial Trolly for Crane Tong Jaw Bit Changing

K.Muruga Bhoopathy, T.

Karthikeyan

Asian Journal of Research in Social

Sciences and Humanities (Anna

University Updated list)

2249-7315

7

Friction surfacing for enhanced surface protection of marine

engineering components; erosion - corrosion study

S. Rajkumar, V.

Balasubramanian, M. Balakrishnan

Journal of the Mechanical

Behaviour of Materials

2191-0243


8

Review on Enhancing the Performance of an Evacuated Tube in Solar Collector using

Heat Pipes

Vijaykumar.P, R. M. Sanjayprasanna, Sachin Manjurekar.

M

International Journal for Scientific Research &

Development

2321-0613

9

Study of Heat Pipes in Solar Colectors Using Nano Fluids

P. Vijaykumar, V. T.Rajkumar, Ramkumar. P

IJSRST 2395-602X

10

Wear Characterstics of Hybrid AI 6063 Matrix Composite reinforced

with Graphite and Fly Ash Particulates

M. Manojkumar, R.

Shanmugaprakash

Applied Mechanics And Materials 1662-7482

11

Comparative Study on Mechanical properties of GMA Welded

IRSM41 Mildsteel Plate Based on Grain Flow Direction

R. Megavarnan,

G. Rajamurugan, R.

Shanmugaprakash


12

Optimaization of Cutting Parameters During Turning of

AISI - 310 using Response Surface Methodology

S. Nandhakumar, R. Vijayakumar, S. Padmavathy,

N. Nagasundharam


13

Comparison of Traditional HAZOP and WHIPP

S. Ashish, Leo A. Gerald, R.

Shanmugaprakash


14

Experimental Investigation on Reduction of Nox Emission Using

Zeolite Coated Converter in CI Engine

M. Karthe, M. Tamilarasan, S. C.

Prasanna, A. Manikandan


15

Design and Fabrication of Water Bottle Wrapper Remover Machine

M. Kalidass, R. Mahavignesh, R. Arun, S. Sekar


16

Multi Response Optimization of Cutting Parameters of Wire EDM

in Titanium using Response Surface Methodology

B. Sivaraman, S. Padmavathy, P. Jothiprakash, T.

Keerthivasan


17

Preparation of AI6061-SiC with Neem Leaf Ash in AMMC's by Using Stir Casting Method and

Evaluation of Mechanical, Wear Properties and Investigation on

Microstructures

S. C. Prasanna, C. Ramesh, R. Manivel, A. Manikandan


18

Fabrication and Testing of Downdraft Gasifier for Solid

Biomass

K. C. Keerthivasan, S. Nandhakumar


19

Gamma Probabilistic Neural Network Models to Track Optimal Thermal and Electrical Power in

Solar PVT Systems

C. Ramesh, J. Kumar, S. C.

Prasanna


20

Experimental Studies on the Performance of a Large Scale Solar Greenhouse Dryer for

Banana in India - A Case Study

Ramesh. C, R. Sivakumar, M.

Premalatha, M. Vivekanandan,

C. Manickam


21

Analysis of Hurdles and Stress of School Teachers Among

Employed Couples

P. Vanitha, S. Kuppusamy,

C. Ramesh




2249-7315

22

Performance of Al-Si-Glass fiber Composite Pistion in an IC Engine

M.Karthe S. C. Prasanna


23

Experimental Investigation on Surface Characterization of

Chemical Treated Natural Fiber Composite

C. Ramesh, S. C. Prasanna


24

Evaluation of Zero and Sub-zero Temperature Tensile and Impact

Properties of Quenched and Tempered Steel Weldments

M. Balakrishnan,

V. Balsubramanian, M. A.

Muthumanickam

Journal of Iron and Steel Research

(Science Direct)2210-3988

25

Role Conflict and Stress faced by Employed Couples

P.Vanitha, C. Ramesh,

Dr.S.Kuppusamy




2249-7315

26

Lean Six Sigma Approach to Improve Overall Equipment

Effectiveness Performance: A Case Study in the Indian Small

Manufacturing Firm

C. Ramesh, Dr. C Manickam, S. C.

Prasanna


Sciences and Humanities

2249-7315

27

Tensile Properties of Friction Welded AISI 4340 Joints

Balakrishnan Marimuthu,

Balasubramanian Visvalingam

Mechanical Testing/ Production - Oriented

Testing0090-3973

28

Dry condition Turning of AlN-TiC Tool Inserts Contrived from

Electric Discharge Plasma Activated Sintering

S. Sathishkumar, M. Karthe, R. Shanmugaprakash,

S. Sakthivelu

International Journal of Scientific

Engineering and Applied Science

2395-3470

29

Comparison of evacuated tube and flat plate solar collector – A

review

P.Vijayakumar, S.Sathish Kumar,

S.Sakthivelu, R.Shanmuga

Prakash

World Wide Journal of Multidisciplinary

Research and Development

2454-6615

30

Investigations on the emission characteristics of diesel engine

blende with n-Butanol

Karthe Manivannan, Prasanna S.C,

Manivel.R, Sathishkumar.S



2454-6615

31

Extraction of bio-diesel from Mahua oil by using trans-

esterification process and blended with diesel

K.C.Keerthivasan, R.Shanmuga

Prakash, S.Sakthivelu,

S.Sathish Kumar



2454-6615

32

Experimental investigations on the performance characteristic of diesel engine using n- butyl

alcohols

M. Karthe

International Journal of Latest Engineering

Research and Applications

(IJLERA)

2455-7137

33

Investigating the Effect of Machining Parameters in CNC Turning Using DOE Technique

S.Sakthivelu, R.Shanmuga

Prakash

International Journal of Latest Engineering

Research and Applications

(IJLERA)

2455-7137

34

Comparative Analysis of Various CFBC Cyclone Separator REPDS

Profiles

N. Prasanna, R. Shanmuga Prakash

and M. Vijayakumar

International Journal Vehicle Structures &

Systems0975-3540

35

Electric Vehicle by Using Modified Topology of Multilevel

Inverter

A. Rathinam,

T. Karthikeyan, K. Ramani

International Journal Vehicle Structures &

Systems0975-3540

36

Failure Mode and Effect analysis in Engineering Educational Sector

Balamurugan.R, Sivaraman.B, Parthipan.N,

Kirubagharan.R

Journal of Chemical and Pharmaceutical

Sciences0974-2115

37

Experimental and numerical simulation of tensile and flexural

behaviors of hybrid bio particulate coir-polyester composites

K. Christal, C. Manickam,

N. Parthipan, S. Jayabal


Sciences0974-2115

38

Work-Related Musculoskeletal Disorders among Hammering

Workers

T. Anandaraj, S. Nishanth,

S. Sakthivelu, K. Senthilraj


Sciences0974-2115

39

Design and Analysis of Eicher 20.16 Chassis using Ansys 12.0

Jothiprakash.P, Raju.K,

Sivaraman.B


Sciences0974-2115

40

A Study on Employees Opinion towards Employee Engagement

Raju.K, Sivaraman.B,

Jothiprakash. P


Sciences0974-2115

41

Effect of Hardness and Tensile properties of Al6061 based

composites for Piston alloy using Stir casting method

A. Manikandan, C. Gokulkumar, N.

Parthipan


Sciences0974-2115

42

Eco Friendly Drilling Process in AISI SS317 Material

N. Parthipan, M. Ilangkumaran, S. Nandhakumar, K.

Christal


Sciences0974-2115

43

Study and Development of a Miniature Model of an Eco-

Friendly Ground Source Cooling System

Raju Kandasamy, Balakrishnan Marimuthu


Sciences0974-2115

44

Corrosion Study on FSW and GTAW Welded Joints of AA7175-

T6

T. Anandaraj, G. Mahanandha, S.

Nishanth, K. Senthilraj


Sciences0974-2115

45

Thermal behaviours of hybrid bio particles impregnated coir-

polyester composites

K. Christal, G. Sathyamoorthy, S. Nandhakumar, S.

Jayabal


Sciences0974-2115

46

Performance investigation on Diesel engine fuelled with

rendered chicken oil as Bio diesel

T. Nithyanandam,

M. Karthe


Sciences0974-2115

47

Optimization of Clamping Force in End Milling Fixture Using

SFLA Alogorithm

G. Mahanandha, S. Nishanth, P. Jothiprakash


Sciences 0974-2115

48

Experimental Investigation on Imaging System to Determine the

Factors Affecting the Image Quality

Balamurugan.R, Vijayakumar.R,

Karthe.M,Padmavathy.S


Sciences0974-2115

49

Dynamic Behavior Study of 2R and 3R SCARA Robot

Manipulator for Pick and Place Application

M. Selwin, S.G. Arul Selvan, B.

Sivaraman


Sciences0974-2115

50

Review & Design of Automatic Belt Tensioning Mechanism

Sathyamoorthy.G, Christal.K,Vijayakumar.P, Vignesh.D


Sciences0974-2115

51

Microstructure analysis and mechanical behaviors of Al6063 reinforced with B4C and red soil

metal matrix composite

S. Padmavathy, G. Sharmila Devi, T. Keerthivasan R.

Balamurugan


Sciences0974-2115

52

Microstructure Assesment of AA7050-ZrSiO4 Composites

Synthesized by Stir Casting Route

V. Kesavan, S. Sakthivelu, M.

Meignanamoorthy


sciences0974-2115

53

Investigation of Performmance Emission Characterstics of Diesel Engine Blende with Turpentine

Oil and Dimethyl Ether

M. Loganathan, S.C. Prasanna


Sciences0974-2115

54

Optimization Of Rotary Edm Process Parameters For Inconel

718 Using Artificial Neural Network

Dhanabalan.S,Karthi.RR,

Sivakumar.K and Sathiya Narayanan.C

Pak. J. Biotechnology 1812-1837

55

Emission Study On Si Engine Fuelled With Petrol And Iso-

Butanol BlendsP.Baskaran Pak. J.

Biotechnology 1812-1837

56

Quadratic-conjugate-global criterion for optimization of mechanical behaviors of bio particulated coir-polyester

composites

Christal.K,Padmavathy.S, Sharmila

Devi.G, Jayabal.S


57

Optimization Of WED Machining Parameters during machining of

AlSiC Using RSM

Nandhakumar .S, Sivaraman.B,Christ

al.K


58

Experimental study on heat transfer augmentation in helically

coiled tube solar collector with MWCNT / water nanofluid

K.Palanisamy , P.C. Mukesh Kumar


59

An Investigation on Micro Robot for Medical Applications Karthi.R.R,,Dhanab

alan.S, Jeeva.R, Manikandan.A


60

Influence of Particle Size on the Thermal Conductivity of

Graphene CompositesManickam.C,

Christal.K, Prasanna S.C


61

Analysis of Heavy Vehicle Chassis using E-Glass Composite

Material

G.Sharmila Devi, S.Padamvathy,

K.Christal,T.Keerthivasan


62

Experiment in EDM Process by using brass electrode with Inconel Material in Nano Powder Mixed

Dielectric Medium

R.Velavan, S.Nandhakumar, P.Vijayakumar


63

Study of Tribological properties of Rapeseed oil and Canola oil

Emmanual.L , Ragunath.L,Vignes

h.D


64

Machining Fixture Layout Optimization Using Hybrid Krill

Herd Algorithm

S.Nishanth, P.Praveen, L.Ragunath


65

Scheduling Using Petrinet to Increase Utilisation of Resourse in

Flexible Manufactruing System

Kirubagharan.R, Vijayakumar.R


66

Effect of Constructional Change In I.C Engine Piston By Partially

Ceramic Coating

C.Vignesh, S.C.Prasanna


67

Mechanical Behaviour of Hybrid Metal Matrix Composite With

Al6063/B4c/River Sand

R. Vijayakumar, R. Kirubaharan


68

Cronbach Alpha Validation and Correlation Analysis of Work

Practices Mediation Model

M.Selwin, S.G.Arul Selvan,B.Sivarama

n


69

Effect of Post Combustion Treatment On Diesel Engine

Exhaust Gas Emissions

P.C.Mukesh Kumar,

M.Vijayakumar


70

Loop layout in FMS using different hybrid algorithm and backtracking distance of the automated guided vehicle

Kirubagharan R., Balamurugan R.


71

Laser and friction stir welding behaviour of polymers and

polymer composites- A review

Selvan S.G.A., Selwin M., Kalidass M.


72

Optimization parameters of drilling process in electric

discharge machining used in SS317 material

Parthipan N., Prasanna S.C.,

Balamurugan R., Manikandan A.


73Property evaluation of super hard

alloysKarthe M.,

Prasanna S.C. Pak. J.


74

Fabrication of bio-composite material by using agave

angustifolia marginata fiber reinforced with epoxy polymer and investigation of mechanical

properties

Manivel R., Prasanna S.C.


75

Tracking of optimal thermal and electrical power in Solar PVT

systems

Prasanna S.C., Ramesh C.,

Manivel R., Karthe M.


76

Investigations on the emission characteristics of diesel engine blende with isopropyl alcohol

Karthe M., Prasanna S.C.


77

Thermal protection system on space shuttle

Vijayakumar P., Velavan R.,

Sathyamoorthy G.


78

Fabrication of polyester composites reinforced with

unidirectional carbon fiber fabric with addition of SiCp on the

mechanical behaviour of silane treated epoxy




79

Experimental investigation on double pipe heat exchanger by using natural fluid with twisted

wire coil

Kalidass M., Deepak K.S.,

Karthickraj R., Saravanan M.,

Dhanasekaran R.


80Multi-objetive optimization of

edm parameters for Ti alloyDhanabalan S.,

Karthi R.R. Pak. J.


81

Quality cost analysis in an industry

Emmanual L., Kannan V.K., Ragunath L.


82

Prediction of optimized machining parameters in CNC end milling

Sakthivelu S., Anandaraj T.,

Meignanamoorthy M., Ravichandran

M.


83

Design and analysis of brakes used in automobiles

Sathyamoorthy G., Vijayakumar P.,

Manivel R., Christal K.


84

Experimental testing on galvanizing kettle by using

stainless & mild steel with ZrO2 coating

Velavan R., Vignesh C.,

Vijayakumar P.


85

Mechanical behaviour of vinyl ester based hybrid composite

reinforcement with sisal/prosopis juliflora/e-glass fibers

Vasan T.K., Padmavathy S.,

Devi G.S., Nandhakumar S.


86

Stress analysis of artificial hip prostheses using finite element

method

Sathishkumar S., Karthik N.R., Prakash R.S., Manivel R.


87

The mixture of alkaline earth metal and zirconium oxide as a catalyst in catalytic converter

Karthe M., Prasanna S.C.


88

Fatigue analysis on FSW and GTAW welded joints of AA7175-

T6

Nishanth S., Anandaraj T.


89

Experimental investigation of wear behavior of graphene

reinforced vinyl ester polymer composite

Manickam C., Balamurugan R.,

Christal K.


90

Effect of wear and microstructural properties of AL6061 based composites using stir casting

method for piston alloy

Manikandan A., Gokulkumar C.


91

Optimization of machining parameters in CNC drilling of

aluminium 6351 alloy

Sakthivelu S., Meignanamoorthy M., Ravichandran

M.


92

Comparitive analysis of plain and herringbone grooved journal

bearing under the hydrodynamic lubrication conditions

Karthi R.R., Dhanabalan S.


93

Fabrication of aluminium metal matrix composites reinforced with SIC-TiO2 flyash and evaluation of microstructure and wear behavior




94

Multi-objective optimization of machining conditions on surface roughness and MRR during CNC end milling of Aluminium Alloy

7075 using Taguchi design of experiments

Sakthivelu S., Anandaraj T.,

Selwin M.


1428-1511

95

Material optimization of rail track welding and validation using finite

element simulation

Manivel R., Shanmuga Prakash

R.

International Journal of Vehicle Structures

and Systems9753060


1

Scrutiny of machine assignment in various intra-cell layout in cellular manufacturing using automation

studios

K.Arun prasath, R.Deepak joel

johnson

International journal of applied

enginnering research and development

2250-1584

2

Comparative study of dry turning with different composition of

lubricating oil in hardened ohns steel

R.Deepak Joel Johnson, K.Arun

Prasath, M.R.Vennimaal

and S.Thanigaivel

Journal of applied science and research 1819-544X

3

Fundamental approach on layout optimization usig graph theory in cellular manufacturing systems

R. Deepak Joel Johnson, K.Arun Prasath, T.Selva

Prasath, A. Swarna Prabha

Australian journal of basic and applied

scieence 1991-8178


4

Cfd analysis of multiphase transient flow in a cfb riser

A.Mercy Vasan, V.Gopalakrishnan,

N.Prasanna, S.Gowtham


enginnering research 0973-4562

5

Review on Wire electrical discharge machining of die & tool

grade steel

R.Shanmuga Prakash,

M.Sivakumar, M.Jeevaraja, G.Saravanan



6

Heat transfer analysis of compact heat exchanger with vortex

generator using cfd

R.Shanmuga Prakash, K.Prabhu, M.Sameer Ahamed



7

An compartive study of down draft gasifier with the efect of de-

humidifier

K C . Keerthivasan ,

Dr.P.P.Sethusundaram,

M.Santhose,C.Saran


enginnering research0973-4562

8

An experimental investication on mechanical properties and

tribological behaviour of frp composite

M.ValliappanInternational journal

of applied enginnering research

0973-4562

9

Thermal analysis for the ergonomics design of hotel

kitchen environment

C.Ramesh, Mr.A.Manikandan


enginnering research0973-4562

10

Analysis on mechanical properties of zircon and al 203 of aluminium

metal matrix composite

K.Raju,V.Satheeskumar,S.Chandar

Advances in natural and applied science 1995-0772

11

Fabrication of aluminium metal matrix composite using stir

casting method for handlever

C.Ramesh, S.C.Prasanna,M.Va

llippan



12

Experimental investigation of tribological behavior of hybrid fiber and particulate reinforced

vinyl ester composite

C.Manickam, K.Hariharan,

A.Athijayamani



13

Modeling and Multiresponse Optimization of the Mechanical

Properties of Roselle Fiber-Reinforced Vinyl Ester Composite

Manickam C., Kumar J.,

Athijayamani A., Karthik K.

Polymer - Plastics Technology and

Engineering3602-559

14

Mechanical and wear behaviors of untreated and alkali treated

Roselle fiber-reinforced vinyl ester composite

Manickam C., Kumar J.,

Athijayamani A., Diwahar N.

Journal of Engineering Research 2307-1885

15

The World Of Child Sexual Abuse Victims In Mahesh Dattani’s

Thirty Days In SeptemberArul Prakash.T,

Dr.M R Chandran

Research Scholar-An International

Refereed e-Journal of Literary Explorations

2320-6101

department of mechanical engineering 1 2 3

Documents