department of mechanical engineering · 2019-07-12 · dr. syed abbas ali hod’s message. 5 | p a...

32
1 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR Approved by AICTE, Affiliated to Visvesvarya Technological University Nauraspur, Bagalkot Road, Vijaypur(Vijayapura) 586109, KARNATAKA (INDIA). Website: siet.secab.org, e-mail: [email protected], siet_mech Cell: +91-7019368916(Prof. Abbas Bagwan), 8050633873 (Prof. Asif Doddamani), + 91-9880160233 (Prof. Sachin Pandey), 814760762 (Prof. Dilip Sutravey) DEPARTMENT OF MECHANICAL ENGINEERING

Upload: others

Post on 23-Mar-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

1 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR Approved by AICTE, Affiliated to Visvesvarya Technological University

Nauraspur, Bagalkot Road, Vijaypur(Vijayapura) 586109, KARNATAKA (INDIA).

Website: siet.secab.org, e-mail: [email protected], siet_mech

Cell: +91-7019368916(Prof. Abbas Bagwan), 8050633873 (Prof. Asif Doddamani), + 91-9880160233 (Prof. Sachin Pandey), 814760762 (Prof. Dilip Sutravey)

DEPARTMENT OF

MECHANICAL ENGINEERING

Page 2: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

2 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

CET Code E132 SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Approved by AICTE, Affiliated to Visvesvarya Technological University

MECHANICAL ENGINEERING

Page 3: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

3 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

SCOPE OF MECHANICAL

ENGINEERING

Mechanical engineering graduates are sought by

employers in almost all sectors of the engineering industry.

These include the:

Aerospace industry- In aerospace industry mechanical

engineers are used to do research, design, manufacture,

operate and maintain the aircrafts.

Automotive industry- In automotive industry mechanical

engineers are used to do designing, manufacturing

distributes and performs marketing of motor vehicles.

Chemical industry- In chemical industry, they covers the oil

companies, chemical manufactures and the business to

build new chemical plants or to develop new process

technologies.

Construction industry- In this field of industry the role of

mechanical engineer is to design and build the

infrastructure and buildings and its services like heating

and ventilation.

Defence industry- In defence industry, they provide the

equipments and provide support and services to the

armed forces.

Electronics industry- In this field of industry, the role of

mechanical engineers is to design and manufacture

components and complete equipments for sectors from

automotive and the military.

Marine industry- In this field of industry, the role of

mechanical engineer is to develop the vessels and help to

operate them.

Material and metal industry- In this field of industry,

mechanical engineer performs the activities which include

developing new material and manufacturing components

or end products.

Rail industry- In rail industry, the role of mechanical

engineer is to design, construct, manage and maintain the

rail system component from train and tracks to electrical

power system and train control system.

Page 4: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

4 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Develop professionally competent Mechanical Engineers to cater the needs of society.

We at Department of Mechanical Engineering are committed to achieve our vision by:

➢ Imparting Mechanical Engineering knowledge through outcome based education.

➢ By inculcating skills to attain excellence.

➢ Instilling students to become creative and innovative through research activities.

➢ Involve all stakeholders for development of department.

VISION

MISSION

It is my pleasure to welcome you to the department of mechanical engineering at the

SECAB institute of engineering and technology Vijaypur. Mechanical engineering has

been thought of traditionally as a professional discipline and the mechanical engineers of

today are multidisciplinary, with knowledge from other branches of engineering.

The academic programmes of the department reflect not only the core areas of

mechanical engineer but also the research specialization of the faculty. All the faculties

are working in close co-operation while retaining individual identities. We provide our

students with a solid engineering education that focuses on creativity, innovation, strong

ethical responsibility and place equal emphasis on developing strong leadership qualities

in our students.

As far as the faculties of the department is concerned, I am very happy to inform you

that, we have great team of well qualified, dedicated and dynamic faculty members

who are very brilliant in handling the challenging subjects in a very easy and graspable

way by applying a various new teaching methods and intelligible demonstrations during

the course of work. Further, Faculty pay dedicated attention to vigorous research and

students’ projects engendering in them untiring efforts, indomitable will, immense

patience and soft skills as desired by industry.

"I wish a very best of luck to the students."

Dr. Syed Abbas Ali

HOD’s Message

Page 5: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

5 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Further, the M. Tech. program in machine design specialization has been started in the year

2014 with a total intake of 24 students and Ph. D. program.

The department organizes Seminars, workshops/colloquia, guest lectures on wide-ranging

topics. The department also organizes industrial visits for students periodically to provide an

opportunity for the students to interact with working professionals from industry. Further, the

department is planning to collaborate with industries and research institutions to setup

specialized laboratories and joint research programs. Such initiatives will provide an

opportunity to the students to have feel of real on sight situations in the industries and how to

handle them. The department is also planning on innovative ideas for the rural development in

the district of Vijayapur.

The students excel in academics under the constant guidance of well qualified, dedicated

and devoted faculty members. The area of specialization of all faculties has a lot of diversity

that covers various aspects of mechanical engineering and is capable to mold young minds

into successful professionals. The faculty members of the department have presented and

published many research papers in the national & international journals & conference

proceedings. A few of the faculty members are pursuing Ph. D. degree.

Mechanical Engineering at SECAB I. E. T. is an

integrated department comprised of the best

academics, highly qualified and experienced

faculty, intelligent & enthusiastic students.

Department of Mechanical Engineering was

established in the year 2003 with a vision to

produce competent Mechanical engineers

empowered with technical and entrepreneurial

skills in order to contribute towards sustainable

development and started undergraduate

program (B.E.) with an intake of 60, and it was

increased to 120.

About the department

Page 6: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

6 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

1) PG (M.Tech. in Machine Design) course started in the

year 2014-15 with intake of 24 seats.

2) Research environment was initiated in 2016 by

establishing “Research centre” under Visvesvaraya

technological university, Belgaum to offer Ph.D. in

Mechanical engineering; most of the faculty

members are registered for Ph.D.

Newly Introduced Programs

Milestones

In the Department, a Student Chapter of Indian Society for

Technical Education (I.S.T.E.) is functional since 2018.

The department has also established the separate Library

facility with 300+ books related to mechanical

engineering at a start. The library is open to the students

from academic year 2018-19. Department library runs

smoothly with nice library software developed by SECAB’s

IT cell.

In the year 2017-18, the department

introduced a “GATE CLUB” to make

students well versed with basics of

mechanical engineering and make

them ready for competitive exams

Page 7: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

7 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

SL.

NO.

STUDENTS TITLE OF THE PROJECT

1. Mr. Jameer Pasha

Mr. Sibgatullah

Mr. Alam Shamsher Mr. Thaha Khan

DESIGN, DEVELOPMENT & TESTING OF MODEL WIND MILL BLADE USING ADDITIVE MANUFACTURING PROCESS

2. Mr. Maruti Lokhande

Mr. Siddu JK

Mr. Mallikarjun S H

Mr. Kiran Mane

ENHANCEMENT IN DESIGN SPECIFICATION AND FABRICATION OF PORTABLE HARVESTING MACHINE FOR MULTIPURPOSE CROP

3. Mr. Sagar H.

Mr. Prakash S.

Mr. Pramod S.

A DEVELOPMENT OF VIRTUAL SENSORS FOR PREDICTING IC ENGINE EXHAUST EMISSIONS

4. Mr. Durgappa

Mr. VInod Nilangi

Mr. Thimmayya

Mr. Mahadev

“A PERFORMANCE ANALYSIS AND COMPARATIVE STUDY OF CI ENGINE USING STRAIGHT VEGETABLE OILS (SVOS)”

SL. NO. STUDENTS TITLE OF THE PROJECT

5. Chougule, Farhan, Tipusultan &. Azam

DESIGN AND DEVELOPMENT OF AQUASILENCER TO PREVENT GLOBAL WARMING

6. Pratiksha, Vijaykumar

Prakash & Rajesh

DESIGN AND FABRICATION OF ADJUSTABLE MULTISEASONAL HARVESTING MACHINE

7. Mudasi Basavaraj, Honnappa, Bagali Santosh & Shreeshail

ENERGY-EXERGY ANALYSIS OF CI ENGINE FUELLED WITH RAPESEED/WASTE COOKING OIL BASED BIODIESEL

8. Nissar Mirji, Sachin

Manjunath Badiger & Sanjay Kumar

DESIGN, DEVELOPMENT AND TESTING OF WIND TURBINE ROTOR PROTOTYPE USING 3D PRINTING PROCESS

9. Sharib Izhar,

Md. Amir Sohail, Fihueredo Aleutan & Kavlekar Dheeraj

DESIGN AND MANUFACTURING OF LOW COST WIND TURBINE BLADE USING BALSA WOOD

SL.

NO.

STUDENTS TITLE OF THE PROJECT

10. Mr. Kiran Kumar Mr. Sachin Mr. Shivaraj , & Mr. Vinay

DESIGN, DEVELOPMENT AND FABRICATION OF OIL EXPELLER FOR NEEM SEEDS

11. Mr. Md. Haneef,

Mr. Md. Shoaib

Mr. Taushif S, &

Mr. Umarparook

ESTIMATION OF EXHAUST EMISSION PARAMETERS OF 4 STROKE DIESEL ENGINE USING WASTE COOKING OIL DISPERSED WITH NANOMATERIAL AS A FUEL

12. Mr. Balappa H,

Mr. Mastan,

Mr. Md. Ali,

Mr.Sunil Rathod

ENHANCEMENT IN DESIGN SPECIFICATIONS AND PERFORMANCE OF MULTISEASONAL HARVESTING MACHINE WITH MULTIIPLE OPERATIONS

13. Mr. Manohar Sutar,

Mr. Shivakumar

Mr. Vaishnavi,

Mr. Ishwari Byakod

DEVELOPEMENT OF ARTIFICIAL NEURAL NETWORK MODEL FOR THE ESTIMATION OF PERFORMANCE AND EMISSION PARAMETERS OF DIESEL ENGINE FUELLED WITH WCO AS BIODIESEL

Student Research Projects Academic Year 2016-17

Academic Year 2017-18 Academic Year 2018-19

The department faculty members pay

dedicated attention to student’s

projects engendering in them untiring

efforts, indomitable will, immense

patience and soft skills as desired by

industry. Further, most of the final year

projects funded by Karnataka State

Council for Science & Technology

(KSCST), IISC Bengaluru, Govt. of

Karnataka. The following projects were

recognized and funded by KSCST.

Page 8: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

8 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department has taken an initiative to work on innovative projects for societal

applications. The Karnataka State Council for Science & Technology (KSCST),

Bengaluru, Government of Karnataka, is encouraging all the institutions of Karnataka

to take up such projects. It is a moment to mention that the Projects carried out by the

students of mechanical engineering department have received “PROJECT OF THE

YEAR” and “BEST PROJECT OF THE YEAR” Award for

two consecutive years 2017 and 2018, respectively

By:

Karnataka State Council for

Science and Technology

(KSCST), Bengaluru,

Govt. of Karnataka,

AWARDS

Page 9: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

9 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

SL. NO. STUDENTS EVENT NAME & PLACE REMARKS

1. Mr. Saif Hesham

Three day National Level Students’ Event

“TECHNOZIAN17” held at National Institute of

Technology (NIT), Warangal, TELANGANA, India

First Prize

2. Mr. Awez Kapdi

Two day National Level Students’ Technical Fest

“ADVITIYA18” held at KLE Institute of Engineering &

Technology, Hubballi, KARNATAKA, India

First Prize

3. Mr. Masood Mulla Three day National Level Students’ Event

“TECHNOZIAN17” held at National Institute of

Technology (NIT), Warangal, TELANGANA, India

Second Prize

4. Mr. Pramod Jatkar National Level Technical Symposium

“ACCELARATION 2018” held at Walachand Institute

of Technology, Solapur, MAHARASHTRA, India.

Second Prize

5. Mr. Raghvendra

Kattimani

6 Mr. Rajesh & Team Asta College of Engineering, MAHARASHTRA, India. Third Prize

7. Mr. Rajesh &Team SDM College of Engg, Dharwad, KARNATAKA, India First Prize

8. Mr. Ajay Kulakrni Two day National Level Students’ Technical Fest

“ADVITIYA18” held at KLE Institute of Engineering &

Technology, Hubballi, KARNATAKA, India

Second

9. Mr. Veeresh H

10. Mr. Sangamesh G

11. Mr. Sunil Karjol

SL. NO. STUDENTS EVENT NAME & PLACE AWARD

1. Ms. Pratiksha A. PROJECT EXHIBITION OF KARNATAKA STATE

COUNCIL FOR SCIENCE & TECHNOLOGY

(KSCST) 41ST SERIES PROJECT EXHIBITION.

GOVT. OF KARNATAKA.

Title of the Project:

DESIGN AND FABRICATION OF ADJUSTABLE

MULTISEASONAL HARVESTING MACHINE

“BEST PROJECT OF THE

YEAR 2018”

2. Mr. Vijaykumar

3. Mr. Prakash Rathod

4. Mr.Rajesh A Pawar

Student’s Achievements in Academics

National Level

State Level

Page 10: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

10 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

5. Mr. Sibgutullah PROJECT EXHIBITION OF KARNATAKA STATE

COUNCIL FOR SCIENCE & TECHNOLOGY

(KSCST) 40th SERIES PROJECT EXHIBITION.

GOVT. OF KARNATAKA.

Title of the Project:

DESIGN, DEVELOPMENT AND TESTING OF

MODEL WIND MILL BLADE USING ADDITIVE

MANUFACTURING PROCESS

“PROJECT OF THE YEAR-

2017”

6. Mr. Taha Khan

7. Mr. Shamsher Alam

8. Mr. Jameer Pasha

SL. NO. STUDENTS EVENT NAME & PLACE AWARD

1. Ms. Maruti Lokhande PROJECT EXHIBITION OF ANNUAL DAY

2017 held at SECAB IET Vijaypur

Title of the Project:

ENHANCEMENT IN DESIGN SPECIFICATION AND FABRICATION OF HARVESTING MACHINE FOR MULTIPURPOSE CROP

“BEST FUNDED PROJECT OF THE YEAR-2K17”

2. Mr. Siddu Kalyan

3. Mr. Mallikarjun H

4. Mr. Kiran Kumar

5. Mr. Shankar Gouda PROJECT EXHIBITION OF ANNUAL DAY

2018 held at SECAB IET Vijaypur

Title of the Project:

DESIGN AND FABRICATION OF MULTIPROCESSING ROBOT FOR AGRICULTURE PURPOSE

“FIRST PRIZE”

6. Mr. Sachin

7. Mr. Suleman

8. Mr. Santosh S

9. Mr. Amanulah PROJECT EXHIBITION OF ANNUAL DAY

2018 held at SECAB IET Vijaypur

Title of the Project:

DESIGN AND FABRICATION OF MULTIPROCESSING ROBOT FOR AGRICULTURE PURPOSE

“SECOND PRIZE” 10. Mr. Ilyas Tailor

11. Mr. Syed Shahid Hasan

12. Mr. Umer

Institute Level

Page 11: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

11 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Keeping in view the importance of sports in today’s scientific era and its vitality in the shaping

of individual’s personality and ‘health & fitness’, the department lays considerable emphasis

on students’ participation in various sports activities. Many students from the department have

been participating in Cricket, Throw ball, Volleyball, Badminton etc. and secured many prizes

in the games at different levels.

➢ Mr. Mohammed Yaseen. M. Mulla has participated in ‘SRILANKA-INDIA INTERNATIONAL

THROWBALL SERIES’ held at KEGALU VIDYALAYA INDOOR STADIUM-SRILANKA from 10th

November to 11th November, 2017 where Team India has WON the series.

➢ Mr. Mohammad Ismail Inamdar has participated in ‘INDO-NEPAL TENNIS BALL CRICKET

SERIES’ held at PHOKRA-NEPAL from 27th to 31st August, 2017 where team from India has

WON the series.

➢ Mr. Mohammad Ismail Inamdar has participated in ‘25TH JUNIOR NATIONAL TENNIS BALL

CRICKET CHAMPIONSHIP’ held at Bareilly, UP- INDIA from 3rd January to 6th January 2018

where team from India has WON the series with 3-0.

➢ Mr. Santosh Naik & Mr. Mallikarjun has participated in ‘2nd SENIOR ROCBALL NATIONAL

CHAMPIONSHIP 2017-18’ held at DELHI-INDIA from 29th September to 1st October, 2017.

Students Selected in VTU Gulbarga Zone Cricket Team

Student’s Achievements in Sports

International Level

State Level

➢ Mr. Dyanendra Kumar

➢ Mr. Md. Ismail Inamdar

➢ Mr. Santosh Naik

➢ Mr. Md. Rasool Y.

Page 12: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

12 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

SL. NO. STUDENTS NAME OF THE GAME & PLACE REMARKS

1. Mr. Vaseem Nakhib, Mr. Inayatulla

Mr. Santosh Nayak, Mr. Arif

Mr. Shoaib, Md. Hasham Namazi

Volleyball Team,

Kalaburgi zone Volleyball tournament held at

PDIT, Hospet

Third Prize

2. Mr. Balappa, Mr. Md. Ali Bagban

Mr. Sandip B, Mr. Virupakshi

Mr. Umar Farook

Kabaddi tournament

Kabaddi tournament held at BGMIT, Mudhol

First Prize

3. Mr. Chandrashekhar

Mr. Aamir Sohail, Mr. Tousif

Shuttle Badminton,

Shuttle Badminton tournament held at BITM,

Bellari

➢ Department of Mechanical Engineering has WON the First Prize in Inter Department

CRICKET Competition for the two consecutive academic years 2016-17 & 2017-18.

➢ Department of Mechanical Engineering has WON the First Prize in Inter Department

VOLLEY BALL Competition for the two consecutive academic years 2016-17 & 2017-18.

➢ Department of Mechanical Engineering has WON the Second Prize in Inter Department

FOOT BALL Competition for the Academic Year 2016-17.

Institute Level

Students of the dept. Participated in Institute Team for University Competitions

Page 13: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

13 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Some of alumni of the department are working in government sector

Alumni Achievements

➢ Ms. Manjula, Assistant Engineer(AE)

Water Resource Department, Govt. of Karnataka

➢ Mr. Mahadev Chavan, Police Sub Inspector (PSI)

Police Department, Govt. of Karnataka

➢ Mr. Fakruddin Ali, Inspector of Motor Vehicles

Transport Department, Govt. of Karnataka

➢ Mr. Hanamant G, Assistant Engineer(AE)

Water Resource Department, Govt. of Karnataka

DISTINGUISHED STUDENT OF THE YEAR -2018 AWARD

Mr. Saif Hesham, Final Year student of the academic year 2017-18, has

received a “DISTINGUISHED STUDENT OF THE YEAR AWARD-2018” during the

Annual Day-2018, SECAB Institute of Engineering and Technology, Vijaypur,

May 11-12, 2018.

Page 14: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

14 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Placements at Mechanical Dept.

Department creates opportunities to

the students in getting placed in the

top companies immediately after

the completion of their course. The

department regularly conducts the

soft skill training programs.

Page 15: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

15 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

1. Dr. Syed Abbas Ali & Prof. Altaf Hussain Bagwan, Advisor for the project entitled “Design

and Fabrication of Adjustable Multiseasonal Harvesting Machine” which was selected

for the “BEST PROJECT OF THE YEAR AWARD” during Karnataka State Council for Science

& Technology (KSCST) 41st series Project exhibition. Govt. of Karnataka.

2. Prof. Shashidhar A L & Prof. B. A. Badiger, Advisor for the group of students who

completed project entitled “Design, Development and Testing of Model wind mill blade

using Additive Manufacturing Process”. This Projest was selected for the “PROJECT OF THE

YEAR AWARD” during KSCST 40th series Project exhibition. Govt. of Karnataka.

Faculty Achievements

DISTINGUISHED FACULTY OF THE YEAR AWARD

RECOGNITION OF FACULTIES FOR GUIDING THE BEST PROJECTS

1. “Distinguished Faculty Award-2017” during

Annual day-2K17 at SECAB., I. E. T., Vijaypur,

Karnataka, INDIA. (Received by: Dr. Syed

Abbas Ali)

2. “Distinguished Faculty Award-2018” during

Annual day-2K18 at SECAB., I. E. T., Vijaypur,

Karnataka, INDIA. (Received by: Prof. Altaf

Bagwan)

Page 16: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

16 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Sl.

No. Name of the Faculty Research Centre

Year of

Registration

1 Prof. Sachin Pande BLDE Institute of Engineering and

Technology, Vijayapur. 2015-16

2 Prof. Asif Doddmani SECAB Institute of Engineering and

Technology, Vijayapur. 2016-17

3 Prof. Altaf Bagwan SECAB Institute of Engineering and

Technology, Vijayapur. 2016-17

4 Prof. Syed Sameer SECAB Institute of Engineering and

Technology, Vijayapur. 2017-18

5 Prof. Md. Shakir Attar SECAB Institute of Engineering and

Technology, Vijayapur. 2017-18

6 Prof. Sunil Thaned Gogte Institute of Engineering and

Technology, Vijayapur. 2017-18

7 Prof. Shashir Kenganal

Central Institute of Plastics

Engineering and Technology,

Bengaluru

2018-19

8 Prof. Md. Rafeeq Manvi SECAB Institute of Engineering and

Technology, Vijayapur. 2018-19

The programme aims at facilitating our own students and faculty an interactive

research platform by inviting renowned scientists and industry experts from reputed

organizations across India. The internal faculties are also invited to deliver lecture on

current research trends in his/her area of expertise.

COLLOQUIM

FACULTIES PURSUING PHD

Page 17: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

17 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Colloquia Organized by the Department

Sl. No. Topic of Colloquium Resource Person

1. Computational Fluid Dynamics Dr. Raghuram, Department of Aerospace Engg.,

Indian Institute of Science (IISC), Bengaluru,

Karnataka,

2. Optimization Using Genetic Algorithm:

Student Appraoch

Dr. Kaustav Bharat, Scientist, CSIR- National

Aerospace Laboratories (NAL) Bengaluru,

3. Role of Composite Materials in

Modern Orthopaedic Medicine

Dr. Mohammad Talha, School of Mechanical

Engineering, Indian Institute of Technology (IIT)

Mandi, HP,

4. Fundamentals of Nanocomposites Dr. Ananadan Srinivasan, Department of

Metallurgy,NIT Suratkal, Karnataka

5. Human Problem, Innovations,

Entrepreneurship and Mechanical

Engineers

Dr. Ganapati Sinnor, School of Management

Studies, Central University of Karnataka,

Kalaburagi

6. Recent Trends in IC Engines Dr. S. N. Kurbet, Department of Mechanical

Enginnering, BEC, Bagalkot

7. Alternative Fuels for IC Engines Dr. N. R. Banapurmath, BVB College of

Engineering & Technology, Hubballi, Karnataka,

8. Composites and Material Joining -

Introduction

Dr. Vijay Petley, Scientist-E, Gas Turbine Research

Establishment, DRDO, Bengaluru, Karnataka.

9. IC Engine Testing and Emission Control

Technologies

Mr. Arjun Raj, Manager (R&D), AVTEC. Pvt. Ltd.

Bengaluru

10. Entrepreneurship Development

Programme: Introduction& Govt.

Support

Sri. Bhagvan Balepur, Entrepreneur and Former

President, KSSSIA, India.

Page 18: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

18 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

To provide the students to make them enter the Indian Administrative Service,

Karnataka Administrative Service and related services. For this various measures are

taken to enable them to achieve their target by conducting different programmes

like – inspirational lectures, workshops and training programs etc.,

ORIENTATION PROGRAM FOR COMPETATIVE

EXAMS (IAS, IPS, KAS etc.,)

Title: “Orientation Programme for Competitive Exams”

Resource Person: Dr. Ramesh Doddamani, KAS, Department of Commercial Taxes,

Govt. of Karnataka

Title: “Orientation Programme for Civil Service Exams”

Resource Person: Dr. Hampanna Sajjan, KAS, Revenue Department, Govt. of

Karnataka

Title: “Orientation Programme for Civil Service Exams”

Resource Person: Major. Dr. Shivannad Hugar, KAS, Revenue Department, Govt. of

Karnataka

Page 19: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

19 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department conducts the classes on GATE exam preparation and provides the

material for exam.

A Parents meeting is organized with an objective to bring the institute and home

together for uplifting of students as well as institute by maintaining harmonious

relationship between parents and faculties. The department conducts meeting

regularly.

Parents Meet

Seminar on “GATE Exam Preparation”

Page 20: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

20 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

FACULTY DEVELOPMENT PROGRAMMES/

SHORT TERM COURCES/WORKSHOPS ORGANISED

Title: “NI Lab View-A Hands on Approach”

Dates: January 16-21, 2016

Title: “GPUs Ignite Artificial Intelligence Machine Learning & Deep Learning”

Dates: February 6-11, 2018

Title: “Industrial Applications of FEA Using ANSYS”

Dates: March 21-25, 2018

Title: “Introduction to MATLAB and SIMULINK Environment and its Applications to

Engineering”

Dates: March 29-April 02, 2018

Page 21: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

21 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

STUDENTS WORKSHOPS ORGANISED

TECHNICAL TALK/ SEMINARS

The technical talk/seminars conducted in the

department are on the following topics:

➢ Project Work: Conduction and Thesis

Writing

➢ Industrial Applications of FEA

➢ Awareness of CAD/CAM/CAE

➢ Project Work: Introduction, Literature Survey

and Technical Writing

The workshops for the students are conducted on topics:

➢ Assembly and Disassembly of IC Engines: A Practical Approach

➢ Basics of MATLAB and SIMULINK

➢ IC Engine Part Identification and Assembly

➢ Project Work: Introduction, Literature Survey and Technical Writing

Page 22: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

22 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department of Mechanical

Engineering organised a “Blood

Donation Camp”. The Program was

inaugurated by the chief guest Mr.

Randeep, IAS (Deputy commissioner,

Vijaypur).

CONTRIBUTION TOWARDS SOCIETY

Blood Donation Camp

Page 23: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

23 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department of Mechanical

Engineering in collaboration with

National Service scheme (NSS)

executed the plantation drive

programme on 13-Nov-2017. The

programme was inaugurated by

Mr.Kuldeep Kumar Jain, IPS,

Superitendent of Police, Vijaypur.

Plantation Drive

Page 24: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

24 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department of Mechanical Engineering in

collaboration with National Service scheme

(NSS) executed the No vehicle day

programme on 14-Nov-2017. This is one of the

measure to reduce the air pollution and make

the students aware about the problems

related to the emission of toxic gases from

automobiles which causes global warming.

No Vehicle Day

Swatch Campus Abhiyan

Page 25: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

25 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Mechanical Engineering Department conducts the National level student’s technical

fest every year in which students from all over India participate. A two day national

level student’s technical fest provides a platform for sharing knowledge, skills in

engineering and technology. Various events will be organized during these two days

which includes technical paper presentation, project exhibition, technical quiz,

Robowar etc.

Technical Fest

Page 26: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

26 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The department also organizes industrial visits for students periodically to provide an

opportunity for the students to interact with working professionals from industry. Further,

the details of the industrial visits are as follows:

Industry & Institute

1. Diesel Loco shed Hubballi

2. NTPC Koodgi, Vijaypur

3. Narayanpur Dam

4. KPCL, Alamatti Dam

5. VTU NASD Dandeli

6. Center of Excellence Dandeli

7. SUPA Dam Dandeli

8. Bottle Manufacturer

Page 27: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

27 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Page 28: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

28 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The Mechanical Engineers Association (MEA) of department organizes fresher’s function every

year in odd semester. The very purpose of Freshers function is to welcome newcomers of BE,

M.Tech and PHD students in a friendly atmosphere to encourage their creative impulses to

boost their confidence. It is the day where seniors and juniors finally bond and unite to

celebrate being part of the college.

Fresher’s Function

Page 29: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

29 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

The Mechanical Engineers Association (MEA) of department organizes Farewell function every

year in even semester. The very purpose of Farewell function is to say bye to outgoing

students.

Farewell Function and Graduation Day

Page 30: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

30 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

News Clippings

The department work appreciated various media

Page 31: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

31 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

Page 32: DEPARTMENT OF MECHANICAL ENGINEERING · 2019-07-12 · Dr. Syed Abbas Ali HOD’s Message. 5 | P a g e SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR faculty, intelligent

32 | P a g e

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAPUR

JAI HIND

Contact at: Nauraspur, Bagalkot Road, Vijaypur(Vijayapura) 586109, KARNATAKA (INDIA).

Website: siet.secab.org, e-mail: [email protected],

siet_mech Phone: 08352 - 278912, 276425

Cell: +91-7019368916, 8618135613, 9880160233, 9651511742