desert sled issue!
TRANSCRIPT
24 BSA BULLETIN
Bob
1 BSA BULLETIN
Newsletter of the BSAOC of Northern California
March 2016 Number 363
The Way We Were
Letters (lots of them!)
Guess the racer contest
Hooray for the Desert Sled
A Desert Sled primer
The one(s) that got away!
Calendar 2016
Doug Bingham
Rides and rallies!
A new poem from Art!
Maggie
Hawkeye Hillbilly found!
Original articles from club members
Swap meat
The back page funnies
Desert Sled Issue!
Spring is in the air!
2 BSA BULLETIN
Number 363 March 2016 The BULLETIN of the Northern California BSA Owners’ Club is the forum for the
exchange of information among the members. All material contained within this
newsletter is property of the BSAOCNC unless otherwise stated within the article.
Material is not to be reproduced or copied without the written consent of the
BSAOCNC. If you would like to use an article or picture found in this newsletter
please contact the Editor.
Deadline for submission of material for publication is the 10th of each month. Members are encouraged to submit technical information, ads, letters, photographs, or any other items of potential interest. Photos will be returned only if so requested in advance. Opinions expressed in the BULLETIN are those of the respective contributors, and do not necessarily represent the position of the Club membership or its officers. BOARD OF DIRECTORS David James President 510-562-6769 Gary Roper Vice President 541-858-5313 Ray Pallett Secretary 650-592-7244 Mike Crick 916-797-0879 Jim Romain 707-894-3805 Ants Uiga 949-466-6404 John Magri 415-587-7541 REGALIA SALES Patti Meadows 775-359-8150 LIBRARIAN Randy Reiter 510-222-2546 WEBMASTER David James 510-562-6769 INTER. RALLY DELEGATE Barry Porter 831-464-2867 TREASURER Bill Whalen 707-837-0424 ADVISORS Thomas Stott (Pre-unit C Series Singles) 951-659-2406 Heinz Batterman (Gold Star) 510-339-1776 (M20/21) need volunteer *** - *** - **** Jack Wheeler (Pre-unit Twins) 510-724-1782 James Banke (Unit Singles) 831-335-1422 Jerry Meadows (Unit Twins) 775-359-8150 Bill Whalen (Rocket 3) 707-837-0424 (Bantam) need volunteer ***-***-**** CONTRIBUTORS Maggie Neato (Personals) Write c/o the BULLETIN Hap Hazard Write c/o the BULLETIN Claud Baddley Retired Lion tamer Sigmund Fraud Ex-analyst I.M. Supaman Road tester at large
Membership: The Northern California BSA Owners’ Club is open to all BSA enthusiasts at $20 per year.
Associate membership is $5 per year for additional members in the same household. The address for submitting material for publication in the newsletter is, 17320 Santa Rosa Mine Rd. Perris, Ca. 92570
. e-mail: [email protected]
Cover: Unknown rider in the great California desert,, pure freedom!
Back cover: You know you’ve done the same thing!
23 BSA BULLETIN
HONORARY MEMBERS OF THE BSA OWNERS CLUB OF NORTHERN CALIFORNIA:
Dave Aldana Earl Bowlby Don Danmeier Eddie Dow Dick Mann Neil Keen Bob Raber Jim Rice Jeff Smith Craig Vetter In Memoriam: Kenny Eggers Nick Nicholson Roland Pike Roy Bacon
NEWSLETTER Bill Getty, Editor 951-940-5411
Don Danmeier 415-898-0330
RIDES Don Danmeier, Chair 415-898-0330
Ray Pallett 510-815-3561
Mike Crick 916-797-0879
CALIFORNIA Don Danmeier, Chair 415-898-0330
BSA RALLY David James 510-562-6769
CLUBMAN’S SHOW Rick Price, Chair 707-484-3566
Jeff Sunzeri, Chief Judge 831-636-3020
Don Danmeier, MC 415-898-0330
David James 510-562-6769
Patti Meadows 775-359-8150
Bill Whalen 707-837-0424
ELECTIONS Gary Roper, Chair 541-858-5313
David James 510-562-6769
MEMBERSHIP Bill Whalen, Chair 707-837-0424
Patti Meadows 775-359-8150
Ants Uiga 949-466-6404
WEB PRESENCE David James, Chair 510-562-6769
Patti Meadows 775-359-8150
Jeff Sunzeri 831-636-3020
1957 Triumph desert sled raced by Bob Rickard
in the day, Johnny Green photos
22 BSA BULLETIN
Swap Meat
Only British motorcycle related items will be listed, with BSA items having priority. Unless otherwise requested, ads will run for three consecutive issues. If you find/sell what you are adver-tising for during that period, please send the Editor a cancella-tion notice!
The methods for submitting ads for publication are:
Preferred: via Email, [email protected] with any photos in .jpg format
Next Best: Phone 951-943-5886. Good: mail to: 17320 Santa Rosa Mine Rd, Perris
92570. bikes sold through the Bulletin 2015 - 12- so place your add today!
Misc. parts for sale:
For sale: Many boxes of BSA A10 gearbox parts, cases, gears, shafts, about 200 + lbs in various pre-unit transmission parts sold in one lot $1000 For Sale: NOS BSA A75 gas tank 1971 from Cycle Hub stash $1500 1965 Bultaco Metisse frame, water pipe Spanish made one rusty w/title $250 Will be coming to the Clubman and can bring with me if you are interested. All in Southern Ca. [email protected] or 951-943-5886 12/15
We have a limited supply of Ron Halem Memorial T-shirts (L only) - $15 post-paid and Decals for $5. Please contact Patti at [email protected]
1960 Matchless G80CS. New paint by Dennis Lesea on gas and oil tanks. New cover from UK on original seat pan. New cables, many new fasteners. Rebuilt N1 magneto. Complete except for speedometer. No electrics; Califor-nia bike by history; I doubt has ever been registered. $5500. (707) 8292464.
3 BSA BULLETIN
The way we were Your humble Editor
Being a child of the 50’s and coming of age in the 60’s it was my fervent hope to own a chopper. With Peter Fonda showing us the way my friends and I set about modifying our bicycles to emulate the extended fork sissy bar look so popular in the later 60’s. Imagining ourselves to be rebels and outlaws we would strive to be an individual in a crowd of squares. I bought my first real big bore motorcycle in 1970, a beautiful red Comman-do. I went immediately across the street from Tom Orlando’s Champion Motors to the chopper shop. Chopper shops seemed to be on every corner in those days and any chrome rubbish with a hole big enough to bolt it to you motorcycle would sell. Some of the purveyors of this hideous merchandise became wealthy beyond belief. AE Choppers sold some of the better stuff but even their chrome girder forks were made of twisted mild steel with nary a bushing to be found. Steel riding on a grade 5 bolt didn’t wear too well! One local cus-tom shop sold chrome plated railroad spikes as footrests. Called Frisco pegs these things were designed to inflict maximum damage to the rider in a crash. Chrome twisted struts replaced shocks. Mile high twisted chrome sissy bars some with a bayonet welded to the top and chrome plated were as common at a bike gathering as pigeons at McDon-alds. Then there were the chrome electrical boxes under your Amal carburetors to “clean up” the electrics on your T120. These chrome boxes would fill with fuel from a leaky Amal and had multiple sources for ignition, 2 coils and a tractor switch along with one or two toggle switches’ and the deluxe ones has a red lamp to show when the ignition was on. Six bend pullbacks and MC Supply extended cable kits to install them sold like fire extinguishers at a Ford Pinto rally. I went up to the counter and asked what extension would be good for the fork on my new Norton. The salesman asked if I was going to go with a spool wheel with no brake (!) or keep the stock wheel. No brake for me man, they just vault you over the bars and are only good for holding you on a hill anyway. He asked if I was going to rake the frame. Not sure what that meant so being seventeen I said yes. He pointed out that Nor-ton was a hard bike to chop but they had the fork tubes and could rake the frame and supply the struts and the spool wheel along with the 6 bend pullbacks, sissy bar and high-back seat and lace up a 16” wheel. “Great” I said “how much that gona cost?”. So my Norton was saved from a fate worse than death. In the days when I was making $2.25 an hour and my new Commando was $1275.00 and my payment was $45.00 a month, this move to freedom would have been almost the cost of the bike. As the chopper craze ran its inevitable course brakes and other safety issues became a matter of state regulation. Dealers began to offer new bikes with all the chopper stuff added on and incorporated into the monthly payments. Some dealers like Bud Ekins retained all the take off parts and indeed Bud had a veritable treasure trove of OE tanks, fenders and mufflers under and behind his N. Hollywood home. Later he would sell this stuff and make even more money than he did taking it off, sometimes re-uniting the same parts with the bike it had come on originally. I went to a road race with friends and watched transfixed as the ballet that is road rac-ing unfolded before me. I immediately bought a used Vincent low handlebar and fit it to my Norton. Later came Read-titan rear-sets and a Wixom racing fairing. The chopper craze died out over time and has been replaced over the years with various and diverse flash in the pan build types. The bobber craze is dying at the moment and it appears the desert sled is on the way in again. Time to buy some snow shovels to make skid plates. When a old Q air filter brings $350 on flea bay it is time! Ed.
4 BSA BULLETIN
Letters to the Editor Send to: [email protected] or by mail : 17320 Santa Rosa Mine Rd,
Perris, Ca. 92570
It is Norm McDonald co-founder of K&N at Perris, California TT race, in 1959. Bike is 1957 BSA. (Shirt is the givea-way!) Ed.
Hello Bill, I must have missed this quiz last issue. I'll try on the Feb
2016 issue page # 11. Rider # 44Q is Bob Birch. The rider behind him, #
16W is probably Jim Boist. Obviously they are from the WA/OR area
with Q & W letters. Shoot, I got one of these photo questions right a few
issues ago and gave a better description then the so-called winner. I felt
dissed! Hey, I may be wrong on this one but it is a tough one. Hope to
see you in San Jose. Dennis Burkman Y ou are right on Dennis! I will see you in San
Jose. You have won a box of spark plugs!
Hi Bill, This looks like Chris Carter of Motion Pro. Thanks, Neil Fergus
Hi Bill,, My guess for rider 196 is DeWayne Keeter of Gardena, CA Ants Good guess Ants but incorrect…. Ed.
Is it Jeff Smith and can-am ? Bob Ferry Sorry, no
Hi Bill, I'm thinking that might be you on page # 14 except as I recall you bought JRC and I don't think you'd be caught dead on an A-10. Dennis I love A10s Dennis! That’s not me but another king of industry!
Looks like Norm McDonald racing a BSA on page14 of the Feb. 2016 issue. Charlie Stewart You are correct! Note the K&N on his shirt and his name as well.
21 BSA BULLETIN
--PATRIOT EXPRESS LOGISTICS, Inc.-- is a fami-
ly owned and operated business. WE ARE ONE OF THE TOP RATED
MOTORCYCLE SHIPPING COMPANIES ON USHIP BASED ON
REVIEWS. We own 3 trucks, and all of our dr ivers are military
veterans. Our drivers are CDL Class "A" certified. . Regardless of the
condition, all bikes are treated as if they just left the showroom floor.
Rest assured that your bike is safe with us.
832-588-7219 http://moto-transporters.com/
Jim Long’s Power Products
16336 Third Street,
Guerneville, CA 95446
(707) 869-2426
20 BSA BULLETIN
Hawkeye Hillbilly from On Any Sunday!
By Bob Ferry This is in response to our humble Editor's call for articles. Bear with me; this is the first one I've ever written! Last month (January) was the Las Vegas auction. I go every year to see a lot of show bikes that are for sale. It's a chance to see friends that I only get to see but once a year; Bill and Marla Getty, Don Harold, Yoshe from The Garage Company and Martin S. from Holland. Martin brings beautiful BSAs to the auction for sale. And many others I don't have room enough to list here! Of course, all the "regulars" from our local BSA club. This is one of the events every year that I look forward to; this, to me, is a great time! Most people who go to this have something in mind they would like to get if the price is right. I personally was looking at a Velo and an (OMG!) Harley KR. Both went for more than I wanted to pay or had. Looking at the bikes on the floor is another part of this that makes it so much fun. It was while I was walking and seeing if I could find something in my price range (cheap), I came across an old Triumph hill-climber that was pretty rough. Hmmm, maybe in my price range? Well, the more I looked, the more I thought this was a neat bike with lots of great parts: Delta
head for starters. Then I noticed a box behind the bike that
had trophies and an "On Any Sunday"
flyer. Now I see this is the bike from the
movie that was at the Widow Maker hill
climb ridden by Hawkeye Hillbilly. I no-
ticed a guy walking toward us (and the
bike) and I asked, "Are you the Hillbilly?
You are THE guy who rode this bike in
Bruce Brown's movie?" And he replied,
"Yes." After talking to him about the bike
(a 1947 Triumph 500) and its parts, I was
able to introduce him to Bob Smith, Ron
Perconti, Fred Mork and Bill and Linda
Whalen among others. We were talking about the movie when he tells us he came in
second place that day in the hillclimb. (That was not in the movie!) And two years later
he was Number 1 in Canada on that bike. At one point, he asked how we all knew each
other. We told him we were all members of the NCBSAOC. Then he told us that he
loved going all over to hill climbs to beat 650
BSAs with his Triumph
500! Quite a neat guy.
You just never know who
you'll meet at this
event.PS. His reserve
on the bike and all the
stuff was $32,000. It did
not sell but the experi-
ence was worth a fortune
to me! Thank you, Haw-
keye Hillbilly. Bob Ferry
Hawkeye himself!
The author and the hillbilly
5 BSA BULLETIN
WELCOME NEW MEMBERS Dan Lowery Lawrence, Kansas Cliff Rezentes Brentwood, California
Dear Editor: I want to pass on an experience I had with an Amal Monobloc carburetor a couple of years ago. It was the night before the races at Chowchilla Short Track and I was getting the B33 checked over. I snapped the carb. slide to make sure there was no sticking. I did it once then twice and then a third time. On the third time the slide stuck in the body, not good! I pulled the carb. off and found the slide had gotten peened over from hitting the idle stop screw. I dressed down the indentation on the slide and it worked fine again. I want to warn other riders with Amal Monobloc carburetors on their bikes not to snap the throttle. The slide is just a thin shell of a tube and snapping the throttle had eventually peened the slide causing it to stick in the bore. This could have been disastrous going into the first turn or on the street going into a corner. I would rec-ommend checking your slide for this problem. Tom DiSalvo.
Good advice Tom, anyone else have a tip to share? Ed.
I hope next September BSAOC Corporate headquarters will send a news team to the Reno Air Races. Perfect event for people who like to see British machines going fast! I am a mem-ber of the FenceLiners who own 25 acres right on the race course. Come on Sunday to watch the big race or bring camp-ing gear for a couple of days, And for our members who are “careful with their money” it is Free! September 14-18, 2016
Butch Gordo , [email protected] Thanks Butch! Anyone care to join me camping under the races? Ed.
Hi Gang, Here may be a useful tip that members might use MY USES FOR OLD TIRE TUBES By John Magri In my shop I keep this handy ma-terial around for these helpful motorcycle uses .Cut crosswise to make rubber bands to bind the tool roll and to keep loose item’s together. Keeping a couple cut bands in the tool kit just in case say the kick starter spring breaks they can be use to secure the lev-er. Use to extend or join bungee cords when tying luggage loads. Cut and glue a patch to prevent chaffing in places such as under the petrol tank or where side covers rub on the frame tubes. I made washers placed under tank badges where the screws pass through to tank and prevent the securing screws from loosing. I use a carabineer clip attached to the grab rail to hang my helmet when parked and placed a rubber patch over the frame rail to prevent chaffing. You can use a rubber cement type adhesive to secure which makes it removable and damage free. My favorite use is to make wire and cable ties similar to the accessory type found in stores but made to lengths for your specific applications such as under the petrol tank to bind the main wire harness and cables where a longer length is needed and shorter length ties for single cable or wire leads attached to the smaller diameter frame tubes. A template can be made to the shapes needed using a wavy pattern to create narrow and wide cross sections to control stretching and length. For the locking “T” make this twice the finished “T” length in order to fold over its self and secure with tire patch glue this will increase thickness to prevent the tie from pulling through the locking hole after fitting. To attach the ties use a needle nose pliers inserted through the tie hole wrap tie around objects and grasp “T” with pliers
6 BSA BULLETIN
Hurray for the Desert Sled! When men were men and bikes were cool. The great western deserts of the Unit-ed States were virtually empty prior to WW2. The heavy American V twins and the narrow tired cars of the 20’s,30’s and 40’s did not do well in the deep sand and vast distances encountered in the Mojave desert. Miners cut roads and built trail’s but the former were limited and the latter were well suited to pack animals but wholly inadequate for a Harley 74. World War 2 introduced American service men to European lightweight motorcycles. Imagine the difference jumping from your 800 pound Chief to a light and nimble Speed Twin. Or even more pronounced ,the Matchless com-petition 500 with a swing arm suspension at the back! Enterprising soldiers found ways to bring some of these motorcycles back when they came home from Europe. Even more enterprising men found ways to import and sell these machines to a ready clien-tele. My father had been born and raised in Chicago, but when he answered Uncle Sam’s call to service spent some time in San Diego, California. Imagine his surprise and delight to discover that there was no snow there in winter– ever. When he was released from the service and had started his young family he determined that California was where he wanted to raise his boys. And he wasn’t alone, tens of thousands of service-men discovered California weather and flocked to the west. And there was Johnson Motors (Triumph– Ariel), or Hap Alzina (BSA), or Cooper motors (Matchless-AJS) to sell them one of those new foreign bikes. Exploring the great western deserts became popular. There were military surplus Jeeps for sale or if you could afford it a new Trophy, G80CS or Gold Star. British motor-cycle owners quickly learned to jettison what wasn’t needed on their bikes and began to form clubs. The Checkers, Shamrocks , Dirt Diggers, Hilltoppers MC, Jackrabbits, Lost Angels, Lost Coyotes, Prairie Dogs MC, Prospectors MC, Rovers MC, Viewfinders MC, Gripsters MC, Claim Jumpers MC, Soreheads MC and dozens of others sprang up. Fa-mous races including the Bear chase AKA The Big Bear Grand Prix, Barstow to Vegas, the Greenhorn Enduro and others featured starting lines consisting of hundreds of rid-ers. In those days the sponsored factory riders rode the same bike Joe Sixpak could buy, so in theory you could be just like them. Bud Ekins, Roger White, Mike Patrick, Eddie Mulder, Jack Simmons, Buck Smith and dozens of others raced what in essence was a stripped down stock street bike. An aftermarket supply group quickly saw a way to make some money from this new form of cycling. Most of the founders of the compa-nies started as racers themselves so knew what the riders wanted. Webco, Flanders, Hap Jones, Graham Sheet Metal, MC Supply, Malcom Smith, IMS and other famous names began as makers of skid plates and oil tanks and other replacement accessories. The desert was tough on stock parts so the aftermarket quickly answered the call , making skid plates and oil tanks and eventually even frames. Unlike the sketchy chop-per stuff , poorly made desert racing parts failed immediately and the maker either changed his ways or went out of business. Bud Ekins is probably the most well known of desert racers. He began riding on Match-less, but when Triumph introduced the swing arm T110 in 1954 he soon changed brands. Bud became linked with Triumph products and with his winning smile and rug-ged good looks was one of Triumph’s best selling tools. Triumph became so popular
19 BSA BULLETIN
18 BSA BULLETIN
DEAR MAGGIE:
My hubby, "Angular Momentum", has recently started tak-
ing his 1970 BSA Lightning in for repairs to a new shop
owned by a very attractive older blonde lady named "The
Cougar". She assured him that both he and his machine
would be in good hands. Hmmmm. Right away, she con-
vinced Angular that his BSA would run much better if he
hired her to switch the electrical system from positive
ground to negative ground. Maggie, I can't see how this
would be an improvement! I mean, the BSA doesn't care a
piff which pole goes to ground, right?! But The Cougar
batted her long false eyelashes at my hubby, and he instant-
ly caved. To add insult to injury, she charged him double
for a "negative ground battery"! Then she sweet-talked him
into changing the perfectly good stock wheels on his BSA
for new ones, which she claimed were better because they
have clincher tires. She said that with these new wheels
and tires he'd be able to lean the bike over at even steeper
angles and go around curves faster. "It's a bit scary to be
going that fast," she warned him, "so you'll have to get used to tightening up your
sphincter muscles. Hence the term 'clincher tires' ". At this point, I pointed out that he
was spending far more time at The Cougar's shop than he was at home, and even more
troubling, he was spending far more money on his BSA than he was on me! He
claimed that he loved his bike and was merely being anal. I agreed with him, but I used
a word that was slightly different from "anal" although closely related to it.
Today he came home and said that The Cougar had talked him into installing new
brake pads front and rear. Maggie, his BSA is equipped with mechanical brakes, and
even I know that they have brake shoes, not pads. I think the only thing that's getting
padded here is the repair bill! Are all male BSA owners this gullible? Maggie, what
can I do to help Angular spend more time at home with me and less money on needless
repairs at The Cougar's? – SKEPTICAL IN PALMDALE
Dear Pants-in a-Wad:
As to your first question: no, most male BSA owners are not that gullible, but (and
here’s a hint) they do appreciate being appreciated. But slow down for a minute. Judg-
ing from what you have told me here, there are relationship metaphors all over this sto-
ry. Don’t you think Cougar Woman’s ploy is obvious? The polarity issue is not entire-
ly without merit (Henry Ford had the same idea as BSA with regard to that, look it up),
but that’s not the point. The clincher in this is not the tires, but the bold play she’s
making to get your dumbass hubby to do the old switcheroo – from you to her. Geez,
you must be tone-deaf and blond. I mean, blind. So go back to that last question again
and think about what you can provide in the way of feminine charm to overcome it .
MAGGIE NEATO
7 BSA BULLETIN
that there was a long waiting list to get one. The factory worked triple shifts to fill demand and was remarkably profitable for the parent BSA group. As the public’s environmental awareness began to blossom in the late 60’s it became more and more apparent that having 1000 motorcycles race recklessly across virgin desert was not very environmentally sound. An influx of even lighter dirt bikes from Spain and Sweden soon gave the thundering Triumphs a run for their money. An upstart piano maker from Japan entered the famous Catalina GP with a Yamaha 250 twin. The Japanese soon outdistanced the Spanish Bultacos, Ossa’s and Montesa’s and had the Swedish Husky dead in their sights. The DT1 Yamaha spelled the end of the Desert sled, relegating them to special vintage classes or as curios for old timers to gush over. The last serious race won by a true sled was the 1967 Barstow to Vegas race won on a 67 TR6 Triumph piloted by Dusty Coppage, who beat 500 other riders to the checkered flag. That bike is currently owned by Donna Owens, wife of the late Pat Owens, who along with tuning great Danny Macias were responsible for building the engine for the bike. (The bike is on display in our shop in Perris Ca. on loan from Donna). But as they say if history doesn't repeat itself it often rhymes and we are finding a re-newed interest in building desert sleds. The beauty is that there is no definite way to do it. Each bike is a work of the builders imagination. We are selling more Ekins high level pipes than ever and have noticed a decided price increase on these classic race bikes. In the day there were thousands of these bikes built from original street bikes and many have been overlooked until now . Young riders who weren’t even a gleam in dad’s eye in
the day are eagerly researching these bikes and looking for the parts to live those robust times over again. So find yourself a donor Triumph or BSA and have at it. No worries about chrome plating or correct fasteners here just will it go the distance. Front fender made of a strap of stainless held with hardware store bolts. Seats with wood bases and home made leather covers, or as my friend Rich Eaton used to say “you don’t need long travel suspension, only a long travel seat”. Fenders with extra holes? Who cares? Rims a bit out of true, so what? Tank has a dent or two-add a few more for effect. Need a skid plate? Use an old snow shovel (yes really). Don’t need no speedometer or tach. Oil tank filler moved to the outer edge of the tank so you don’t need to remove the seat to check your oil. Weld on some old folding pegs sourced from the local cycle wrecking yard and you are in business. Claud Baddley
The late Dusty Coppage at Trailblazers 2015
Charlie Hockie 1957
8 BSA BULLETIN
Desert Sled primer,
Desert Sleds made easy. By I.M.Supraman
So you want to pretend you’re Buck Smith,
do you? Want to feel like McQueen or maybe
Bud Ekins? Well you can do it on the cheap
and have a bike that will attract more atten-
tion than a red Vincent in Vegas, and be
398,000.00 cheaper . Here is where to begin: 1. Desert sleds were a run what ya brung af-
fair. You can make most anything into a sled but the bike of choice is Triumph’s
500/650 twins. So begin by finding a frame/engine. Matching numbers? Who
cares! A little bent? So what! A frame /Engine/swing arm will do for a start. Miss-
ing cylinder fins are OK. Pealing chrome a plus. All this makes the bits cheap or
free.
2. Watch CL for a doner bike for forks/wheel. Ceriani forks are great if you can find
them but a fork off a 1970’s Yamaha or the like will do nicely and be under $100.
You will need a Triumph rear wheel but bad chrome and dented a bit are perfect-
ly acceptable so $75. Use whatever fenders you can find, rusty and dented pre-
ferred. Paint them flat black or whatever house paint you have extra.
3. Watch Ebay for used Desert sled bits. There were 10,000 of these converted in the
50’s and 60’s and the bits are plentiful. The pipes on my 1954 T110 came from
Johnnie Green for $25. The tank was dented so was $50, forks are H-D Sprint for
$75 with a Honda 305 front wheel $25. Tires are vintage 1970’s knobbies. Perfect!
4. Make your own seat. Use a plywood or aluminum base. Cut foam from the back
seat foam of a 1980’s Japanese car, cheap at Pick-ur-part. Use your wife’s carving
knife to cut the foam. Have the dear lady make a cover and rivet in place. My late
friend Rich Eaton always said you don’t need long travel, all you need is a long
travel seat so make it as thick as you can reach the ground with.
5. Footrests need to fold so take the old non folding rests and cut the foot part off or
trade your nice ones for someone else’s folding ones + some cash, after all you're
doing them a favor! Or get a set of folding footrests from a doner 70’s Japanese
dirt bike and have the local muffler shop weld them to your old footrest hanger.
Make sure they weld them on the right way around (my guy didn’t first try!)
6. You may want to look inside the engine to be sure it is in reasonable shape but
using a bit of oil is perfectly OK. My sled has a cracked sleeve with a long scratch
from a loose wrist pin and a ridge midway down from rusty rings. It runs perfect-
ly! Valve seats in the head to deep? So what, you will never use the full power of
the bike anyway. Guides a little loose? No big deal. Clean it up and re-use in the
Desert sled moto. I re-used old rings cutting down used +.060 to my+ .040 bore.
7. Buy the best hardware store bolts you can, no worries about the correct head or
thread here so long as they fit the holes.
8. Make a bash plate from an old flat shovel. No worries about chrome, use cheap
rusty levers and a slightly bent handlebar, you can straighten it all when on the
bike anyway. You will likely get a lot of practice with this .
9. Assemble the whole thing without a bit of concern for appearance. No chrome
need be good, no rim need be straight, no tank undented. You get the idea.
10. Sounds hideous but I tell you that this mongrel will be the most fun bike you have!
17 BSA BULLETIN
Jim Varnes poses on the BSA Gold Star he
raced to an excellent fifth-place finish in the 1963
Daytona 200. This was the first year the AMA al-
lowed the use of fairings on the bikes. The track
used then was a two-mile circuit that didn’t utilize
the banking. In 1964 they used the banking for the
first time. Varnes was the top finishing BSA in the
race. His son Kevin became a well known AMA
Grand National flat track racer in the 1990s.
THOUGHTS ON OLD AGE by Art Sirota c 2016 Art Sirota the day I can't swing my leg over the seat of my old BSA is the day I will hang up my helmet and put the old leathers away but I still might continue to putter on the old vintage dirt track and grass on my Velocette 350 single until I fall down on my KSS when I blow up the engine and gearbox on my Sunbeam S7 because I'd forgotten to check the oil levels then it's time to admit old age flaws if I pull up in front of McDonalds to get a hamburger and malt but neglect to fold out the old side stand and my Triumph falls on the asphalt when I can't gather strength to kick over my old Bantam of two-stroke design then I might just sell off the collection and to my sad fate be resigned for nothing can go on forever and everything comes to an end but until I am deaf, blind and senile I'll be racing around the next bend
16 BSA BULLETIN
Clubman’s Calendar 05 Mar (Sat) BSAOCSC “ORTEGA HIGHWAY TO LAKE ELSI NORE” RIDE Dave Zamiska, 714-962-0995 or Steve Ortiz, 951-245-5287
13 Mar (Sun) NCNOC Highway cleanup and ride Ken Armann, 408- 455-9388
19 Mar (Sat) BSAOCNC NORTH BAY RIDE Gus Varetakis, 415-
265-2377
20 Mar (Sun) BSAOCSC INLAND EMPIRE VINTAGE STREET RIDE Steve Ortiz, 951-440-3521
20 Mar (Sun) SCNOC “Bib” Bibbiani Memorial Ride, Frazier Park-Kevin Nerden, 310-293-2843
2 Apr (Sat) CLUBMAN’S ALL-BRITISH SHOW & SWAP MEET, San Jose Don Danmeier, 415-898-0330 or Bill Whalen, 707-837-0424
3 Apr (Sun) THE “MORNING AFTER” RIDE, Los Gatos Ray Pallett, 510-456-6578 10 Apr (Sun) BSAOCSC AL BAKER DUAL SPORT RIDE John Gardner, 310-920-3393 or Mike Haney, 760-365-9191
16 Apr (Sat) BSAOCNC/BSAOCSC MID-STATE RIDE, Carmel 17 Apr (Sun) Greg Goris, 805 798-3573
16 Apr (Sat) AHRMA vintage cross country, trials and motocross, www.ahrma.org
16 Apr (Sat) SCNOC Solvang Vintage Motorcycle Museum tour 17 Apr (Sun) Kevin Nerden, 310-293-2843
24 Apr (Sun) BSAOCSC BARRY SMITH MEMORIAL ALL-BRITISH RUN Steve Ortiz, 951-440-3521 or Barbara Barrett, 661-703-9249
24 Apr (Sun) NCNOC Santa Cruz ride Ken Armann, 408-455-9388
28 Apr (Thu) AHRMA Road racing, Sonoma Raceway 29 Apr (Fri) www.ahrma.org 30
Apr (Sat) BSAOCNC “MOTHER LODE” RIDE, El Dorado Hills
Mike Crick, 916-797-0879
9 BSA BULLETIN
10 BSA BULLETIN
BSAOCNC Sacramento Delta Ride
Saturday, February 27, 2016
Departs from Municipal Pier parking lot
Rio Vista
(west end of the bridge on Highway 12)
10:00 AM
be gassed and ready to go
Get out of town! Get back to Nature!
Travel scenic by-ways! Pick up a little California history! Have lunch with your buddies!
EXERCISE YOUR BSA!
INFORMATION:
Don Danmeier, 415-893-1650 (days)
415-898-0330 (eves to 9)
15 BSA BULLETIN
Doug Bingham RIP from the Trailblasers web.
With deep regret we report the passing of Doug Bingham , known as “Mr. Sidecar,” and for good reason. Since the 1960s he has raced, designed, manufactured and distribut-ed motorcycle sidecars. He has also developed new uses for sidecars, organized events that are enjoyed by enthusi-asts as well as the general public, and served as an ambas-sador for both the business and pleasure sides of motorcy-cling. Originally from Buffalo, New York, Bingham grew up in Southern California during World War II, where his father worked as an engineer with the Curtis-Wright Aircraft Cor-poration. His father rode a motorcycle, and Bingham sometimes rode along. A cousin gave Bingham his first motorcycle, a non-running 1941 Indian Chief. Bingham got the Chief up and running with help from his grandfather. Bingham began racing in the early 1960s. His first exploits were as the co-pilot aboard an off-road sidecar piloted by Terry Hansford. He later graduated to pilot and com-peted in and won such events as the Jackpine and Greenhorn Enduros. The American Motorcyclist Association began sanctioning the AMA Sidecar Road Racing Championships in 1968 and Bingham won the inaugural championship with co-pilot Ed Wade aboard a Harley-Davidson powered, Bingham-designed racer. Bingham and Wade captured the title again in 1969. In 1969 Bingham incorporated his sidecar business, Side Strider Inc., in Van Nuys, Calif. He then began production of the Bingham Mark I, which was the first new sidecar de-sign in decades. The Bingham Mark I was lauded in the Dec. 1969 issue of Popular Science as being innovative, handsomely designed and reasonably priced. Bingham continued to develop and market a line of sidecars, Including: the Bingham Mark II; two-seater “taxi” models; a military model equipped with a machine-gun; and special transport units. Bingham and Side Strider also be-came the U.S. distributor and part owner of the venerable British sidecar com-pany, Watsonian, which later merged with the Squire sidecar company. Bingham is also the founder of the Griffith Park Sidecar Rally in Los Angeles. The event celebrated its 37th anniversary in 2008, drawing over 400 participants and thousands of spectators. The Griffith Park Sidecar Rally has been named among America’s top 25 motorcycle rallies by Rider Magazine. Bingham received the 1998 AMA MVP Award for advancing the cause of motorcycling. He served as Chairman of the Sidecar Industry Council, which includes all U.S. sidecar manu-facturers as well as Harley-Davidson. He was a founding member and President of the U.S. Sidecar Association, and is also a member of the Trailblazers M.C. Hall of Fame. Summing up his life’s work, Bingham said: “To me, the beautiful thing about motorcycling is that I’ve met a lot of people I never would have met, and done a lot of things I never would have done.”
14 BSA BULLETIN
Nick Nicholson was one of the stars of the Catali-na Grand Prix in the 1950s. Here he runs his BSA through the down-town section of the course.
Can you name this stylish BSA rider?
Send your guess to :
Winner gets 2 pair of Gran Turismo grips for their British motorcycle!
11 BSA BULLETIN
BSA OC NC
North Bay
Ride Saturday March 19, 2016 Ride leaves from 7th and Grant in Novato at 10 AM. We will stop in Tomales for Coffee and
have a Gas stop in Bodega
Lunch at the William Tell House in Tomales
around 1:30
Be ready for Green Scenery, Bumpy Roads, Great Food, Better company, and maybe a
little rain.
Call
Gus Varetakis
415-265-2377
12 BSA BULLETIN
The Ones That Got Away John M. Anton In a recent Bulletin the editor lamented his sale of a BSA
Gold Star for $200. Who doesn’t have a sad tale of what is
now a classic, examples of which sell for tens of thousands
at Las Vegas, either sold cheaply, traded for something
forgettable, or worse yet, not bought when available?
I didn’t know my $120 Royal Enfield (#3460, but who’s
counting?) was one of 191 imported by Cooper Motors of LA to compete with the Goldies and
Matchless Typhoons around the ovals or across the deserts. I could have taken the hint when the
guys at A&A Motors in Redwood City tried to buy the pieces, the “big head,” the scrambler fly-
wheels, and the Alfin roller bearing crankpin, from the boxes it came in. All I learned was that
most new parts had to made or had to come from England and then didn’t fit. A&A did lots of
machine work, I did get it running, and running sweetly at that. When I traded it for a rigid Tri-
umph 3T plus cash, I was happy to learn that Joe Sarkees in Sacramento had in stock whatever
Triumph parts I needed. The 3T was traded for a 40 Ford coupe with a 56 Buick V8 and 4-speed
transmission that tended to select more than one gear at a time. The less said about that one, the
better, but next up was a duplex framed 62 Triumph in what at the time passed for TT trim. City
Bike later paid me $50 for the “Scariest Ride” I had aboard that one. It was sold for $450 to a
guy who unfortunately put a hardtail on it. About the same time my great-uncle, a rancher who
had seen me work on the Enfield, gave me a 4-cylinder Indian engine, all that remained from
somebody’s son’s fatal accident in the early 50s. My uncle had it about 20 years and had never
gotten around to making a roto-tiller out of it. I peeked inside and saw such things as big end
nuts secured by bent-over nails. I passed it on to a collector from Sacramento whose name I think
was Whitey Tompkins. With the proceeds of the two sales I bought a 60 VW bus and headed to
Canada.
When I finally got a real job there were plenty of Brit bikes which by then nobody wanted.
Motorcycles Unlimited in Corte Madera had a Commando with the full Dunstall package includ-
ing the double disk forks. $1200 seemed reasonable enough but it came back from a three block
test ride running on one cylinder. Angelo Rossi in Santa Rosa was selling off the last new BSA
A65s, with unpopular home market tanks, for about the same. A guy in the neighborhood offered
a tidy Commando for $1000. A guy in Woodland had an immaculate 65 Triumph Tr6C for only
$600. I wanted a café racer project, so bought for $500 a ratty Tr6. I found a Bonneville head at
a salvage place for $75. After Craig Hansen at Grizzly Engineering tricked out the brakes and
suspension, it broke a connecting rod. After Lem Corder in Citrus Heights rebuilt the insides, it
moved with me to Sonoma County where Fred Twigg helped with the oil leaks. That one went to
San Jose for $1800 in very crumpled small-denomination bills.
Prices were trending upwards but good stuff was still there. In the early 80s, Hall-Burdette in
North Sacramento, always my idea of what a bike shop should be, had on the floor a new John
Player Replica Commando and a nearly new Rickman Enfield. In Spokane, the last new Tri-
umphs were going for about $2200. I test-rode but didn’t pay $2500 for a Rickman street frame
with the fat Rickman forks and a Triumph engine. I decided that I was over Brit bikes and went
looking for a Ducati. TT Motors in Berkeley had a 73 750 Sport for only $2000, but rough on the
outside suggested rough on the inside. Herb somebody (Willis?) in San Jose had in a garage full
of motorcycles (and a Manx in a bedroom) including another 73 750 Sport. He wanted about
$2800 for it. Dewey’s in Seattle had a 750SS for a whopping $6500. Craig Hansen showed me
an 860GTS (“the fastest one with valve springs”) for $1500. Hall-Burdette had a new Darmah
for about $4000. We all thought Ducati was going under so I bought from Cycle West in Petalu-
ma, discounted to $6500, a new 49-state 750 F1B. Despite the “closed course competition only”
decal on the tank, I succeeded in getting it registered. A Reg Pridmore track day at Sears Point
convinced me I had no business trying to ride it as Ducati intended. A long trip in the extreme
Continued next page 13 BSA BULLETIN
Norton got into the desert sled act with their 1960 Nomad 600cc twin. A very rare bike these days!
riding position with stiff cantilever suspension put me first in physical therapy and later in the
hospital. I did ride it to the first post-op appointment at UCSF, but with original tires and about
3500 miles on the odometer it was sold into Marin County. A “last real Ducati” in such condi-
tion now sells for at least three times what I gave and got, the 750 bevel-drives for well over ten
times what I could but didn’t pay.
With eBay and all the auctions, the market has become international. Prices continue to spiral
upwards but fortunately parts for the old stuff are easier to find. What in another 20 years will I
wish I had bought? John