design for durability: cross-laminated timber (clt...
TRANSCRIPT
![Page 1: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/1.jpg)
www.fpinnovations.ca
Design for Durability: Cross-Laminated Timber (CLT)
Construction
![Page 2: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/2.jpg)
2
CLT Building Envelope Design Guide
Objectives:
Provide designers with guidance on CLT
building envelope design
Remind designers of durability considerations
Photo courtesy: Vaxjo University
![Page 3: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/3.jpg)
3
Document Development Team
Authors– Graham Finch, RDH Building Engineering Ltd.
– Dave Ricketts, RDH Building Engineering Ltd.
– Jieying Wang, FPInnovations
– Constance Thivierge, FPInnovations
– Paul Morris, FPInnovations
Peer reviewers– Annette Neylon, Mark Porter, George de Ridder,
Associated Engineering
– Douglas L. Watts, Read Jones Christoffersen Ltd.
– Mark Lawton, Morrison Hershfield Ltd.
– Mario D. Gonçalves, Patenaude-Trempe Inc.
![Page 4: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/4.jpg)
4
General Principles of Design for Durability
CLT does not change basic wood characteristics
CLT does not change basic durability principles
Keep wood dry wherever possible
– Minimize wetting during shipment & construction
– Prevent wetting in service
– Allow drying in case wetting occurs
• CLT may dry slowly due to the mass of wood
Anticipate persistent wet conditions or other hazards
– Preservative treatment
– Use naturally durable wood
![Page 5: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/5.jpg)
5
CLT does not change basic building physics
Assess climatic load and control water, heat, air and vapour
flow
Use 4 D’s to protect assembly from water penetration
– Deflection: Divert water off building
– Drainage: Remove bulk water
– Drying: Facilitate drying of wood
– Durable material: Treated or naturally durable wood
General Principles of Design for Durability
![Page 6: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/6.jpg)
6
General guidelines on design for durability
– Best Practice Guide for Wood-Frame Envelopes/
(in the Coastal Climate of BC) (CMHC 1999)
– Building Enclosure Design Guide – Wood Frame
Multi-Unit Residential Buildings (HPO 2011)
Consult with building science professionals
– Required in some jurisdictions
Interface detailing critical
General Principles of Durability by Design
![Page 7: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/7.jpg)
7
Focuses on unique aspects of CLT
Tries to answer
– Why important to prevent wetting during construction?
– How to prevent rain penetration into envelopes?
– How to meet envelope energy requirements?
– How to place/choose insulation?
– How to deal with “vapour retarder/barrier”?
– How to build air tight?
– How to make CLT more durable?
– …
CLT Building Envelope Design Guide
![Page 8: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/8.jpg)
888
Construction Moisture Management
CLT construction may reduce wetting potential
– Prefabrication reduces construction time
CLT may get wet and trap moisture when exposed to
moisture
Potential to absorb or trap moisture influenced by
– Wood species
– Amounts of permeable sapwood versus heartwood
– Gaps within and between laminae
• Use of edge gluing
– Any water repellant/coating/membrane applied
![Page 9: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/9.jpg)
99
Construction Moisture Management
On-site protection needed in most climates
– Much attention paid in Europe: temporary roofs etc.
Simple protection measures can make a difference
– Temporary shelters etc.
Consider season for construction
– Try to avoid CLT installation in rain without protection
Design assembly to
– Allow drying in case wetting occurs
Photo courtesy: Vaxjo University
![Page 10: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/10.jpg)
10
Enclosure: Rainwater Management
Rain is usually the largest water source
Building design important to reduce wetting
– Overhangs and sloped roofs
Rainscreen walls proved to be effective
– Two drainage planes
• Cladding and sheathing membrane
– Air space
• Capillary break
• Pressure moderation
• Ventilation
– Provide redundancy for dry areas
![Page 11: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/11.jpg)
1111
Enclosure: Thermal Insulation Design
CLT provides considerable insulation
– Inherent R-value about R-1.2/per inch
• R-4.2 for 3 ½” thick panel
– Solid panel reduces convection in the assembly
Exterior insulation helps keep wood warm and dry
– Cladding attachment must meet structural requirements
– Insulation permeance has impact on wall performance
![Page 12: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/12.jpg)
12
Enclosure: Thermal Insulation Design
Required
nominal
insulation
R-value (RSI)
CLT
thickness
inch (mm)
CLT insulation
R-value (RSI)
Additional
insulation
thickness
inch (mm), R-4/inch
20 (3.52)
2.0 (50) 2.4 (0.42) 4.5 (114)
3.5 (89) 4.2 (0.74) 4 (102)
5.5 (140) 6.6 (1.16) 3.5 (89)
Table 1, Building Enclosure Design, CLT Handbook
![Page 13: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/13.jpg)
13
Enclosure: Vapour Flow Control
Overall principle
– Prevent vapour condensation and facilitate drying
– Control layer on warm/high vapour pressure side
CLT is a vapour retarder/barrier
– 3 ½” solid wood: 3-30 ng/Pa·s·m2 (0.05-0.5 US Perms)
– No need for interior vapour retarder/barrier in cold climates
![Page 14: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/14.jpg)
1414
Enclosure: Vapour Flow Control
Assemblies should be “breathable”
• Based on simulation study by Paolo Baldracchi (U.
Trento) and RDH
– Dry out from initial wetting
– Present lower risk if building envelope leaks occur
![Page 15: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/15.jpg)
1515
Risk increases when impermeable materials used
– May not dry out when initially wetted/wetted in service
– Moisture level may exceed the margin of safety
Don’t place potential vapour barriers/retarders
both sides
Enclosure: Vapour Flow Control
![Page 16: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/16.jpg)
Enclosure: Vapour Flow Control
Climate in Vancouver
CLT with an initial MC of 20%
Low-permeance exterior insulation
Vapour barrier interior
RDH simulation results
MC
in d
iffere
nt la
yers
Outer 30 mm
layer
![Page 17: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/17.jpg)
1717
Enclosure: Air Flow Control
Air tightness of CLT depends on
Joints between boards and layers
Edge gluing and staggered layers help
With wood moisture changes
– Gaps between boards may increase or decrease
– Wood surfaces may form “checks” or cracks
Interface between panels
CLT may not be relied on as a primary air barrier
![Page 18: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/18.jpg)
18
Enclosure: Air Flow Control
Recommend use of a primary air barrier
– Preferred to use water-resistive barrier
– Other approaches may also work: interior drywall
– Continuity at interfaces critical
![Page 19: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/19.jpg)
19
CLT at Grade
Important to provide a clearance between wood
and soil
– A minimum of 8” (200 mm) recommended
– Consider podium structures with CLT on elevated
concrete decks for residential over commercial
Separation between wood and concrete in contact
with moisture important
Detailing at the base critical
![Page 20: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/20.jpg)
2020
A Balance of Wetting, Drying and Storage
CLT has a large moisture storage & buffering
capacity, but …
– There is a limit to amount that can be safely handled
– Moisture may get trapped locally such as at end grain
Drying to
exterior
Wetting from
interior
Wetting from
exterior
Safe storage
capacity
Drying to
interior
Adapted from a slide by Dr. John Straube and RDH
![Page 21: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/21.jpg)
21
Further Increase CLT Durability
Select wood with low water permeability
– Reduce potential for water absorption
Select heartwood of naturally durable wood
– Unlikely to be a practical approach
Use preservative treated lamina for panel base
– For parts of CLT likely to be exposed to moisture
Use on-site diffusible treatment
– Borate/glycol on surface + boron rods inside
Consider making CLT from treated laminae
![Page 22: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/22.jpg)
2222
Summary
CLT assemblies can be durable/energy efficient
Minimize moisture exposure during construction
Design assemblies to keep CLT dry and warm
“Breathable” assemblies are more durable
A primary air barrier is recommended
Interface detailing is critical
![Page 23: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/23.jpg)
23
Ongoing Research
Laboratory and field testing of wall assemblies
– NSERC Forest Sector Initiative (“NEWBuildS”)
– Ryerson University and University of Waterloo
Characterization of hygrothermal properties
– In collaboration with National Research Council
![Page 24: Design for Durability: Cross-Laminated Timber (CLT ...woodusematrix.com/database/rte/files/CLT-Durability by Design.pdfDesign for Durability: Cross-Laminated Timber (CLT) Construction](https://reader030.vdocument.in/reader030/viewer/2022040102/5e96a1c2464313250227f9a4/html5/thumbnails/24.jpg)
24
General Durability Information on
Durability by Design
Durability by Nature
Durability by Treatment
WWW.DURABLE-WOOD.COM
Questions?
Future comments to: