design project greeting card & brooch
TRANSCRIPT
DESIGN PROJECT
“SPARKLING HEART”
GREETING CARD & BROOCH
VALENTINE´S DAY
2 /8 WWW.CREATE-YOUR-STYLE.COM
VALENTINE´S DAY
GREETING CARD & BROOCH
“SPARKLING HEART”
SWAROVSKI ELEMENTS Supplies & Tools
Gluing
Article Product Group Article No. Amount Size Color Color Code
Flat Backs No Hotfi x 2028 11 pcs. SS 12 Light Siam F 227
Flat Backs No Hotfi x 2028 8 pcs. SS 16 Indian Pink F 289
Flat Backs No Hotfi x 2028 6 pcs. SS 16 Olivine F 228
Flat Backs No Hotfi x 2028 3 pcs. SS 16 Sunfl ower F 292
Flat Backs No Hotfi x 2028 4 pcs. SS 34 Light Siam F 227
Flat Backs No Hotfi x 2854 1 pc. 8 mm Crystal Red Magma REDM 001
Flat Backs No Hotfi x 2854 3 pcs. 8 mm Light Rose 223
Supplies
1x Greeting Card, yellow, 14 x 20 cm Leather, red, 8 x 16 cm1x Pin back, gold1x Sheet of paper, yellow, transparent, A4
Tools
GlueLeather glueNeedleScissors1x Sheet of paper, A4Tooth pickTweezers
Level of design: BEGINNER
Have also a look at the text instruction at the last page!
5.7 cm
5.7 cm
STEP 1
3 /8 WWW.CREATE-YOUR-STYLE.COM
8 cm
8 cm
Step 2
x2
Glue
STEP 2
4 /8 WWW.CREATE-YOUR-STYLE.COM
Step 3
Step 4
Glue
Step 5
Glue
STEP 4
STEP 5
STEP 3
5 /8 WWW.CREATE-YOUR-STYLE.COM
4.5 cm 3 cm
1.2 cm
3 cm
1:2
I You4 cm
7.7 cm
I You
STEP 6
Scale 1:2
6 /8 WWW.CREATE-YOUR-STYLE.COM
x1
I You
I You
Step 8STEP 8
STEP 7
7 /8 WWW.CREATE-YOUR-STYLE.COM
I You
8 /8 WWW.CREATE-YOUR-STYLE.COM
STEP 1: Print and cut out the pattern in the illustration in this step to the size stated.
STEP 2: Cut two square 8 x 8 cm leather pieces. Glue the insides of both pieces together so the outside of the leather
shows on both sides. Press them down with a book until the glue is dry.
STEP 3: Attach double sided tape onto the pattern from step 1, stick it onto the leather piece and cut it out.
STEP 4: Remove the pattern from the leather and using tweezers apply SWAROVSKI ELEMENTS onto it in a random
pattern.
STEP 5: Glue the pin onto the backside of the heart as shown in the illustration.
STEP 6: Print out the text on yellow transparent paper as shown in the illustration in this step. Be careful that the
measurements are exactly the same. Fold it in half.
STEP 7: Pierce though the holes marked on the paper using a needle.
STEP 8: To get stability place a piece of cardboard into the paper as shown and attach the pin on the back of the
heart into the pierced holes.
CREATE YOUR STYLE with SWAROVSKI ELEMENTS Design Project
Valentine´s Day Greeting Card & Brooch “Sparkling Heart”