T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

DE

SIG

N

SE

RIE

S

Windows are an integral part of your home and it’s essential to find the right ones to fit your design. Our Design range offers a contemporary feel for maximum light, a spacious feel and optimum efficiency.

D E S I G N S E R I E S

OPEN OUT WINDOWS

OPEN OUT DOORS

SLIDING DOORS

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

‘U’ values are calculated in accordance with EN ISO 10077-2. Table declares 48mm triple glazed values.

All Westcoast windows are manufactured to specification. The product selector summarises tested and calculated performance

achievable by category and may vary according to frame size, glazing specification and other factors. For specific performance data,

please consult Westcoast Windows technical support department.

Open OutWindows

Open In Windows

U-ValueW / m2K

Acoustic Attenuation

Secured by Design

Internal Cleaning

Internal Maintenance

30 Minute Fire Rating

TSG180 Top Hung Reversible 4 1.0 46 4 4 4 4

TSG45 Top Hung Projecting 4 1.0 46 4 4 4

SSG90 Side Hung Projecting 4 1.0 46 4 4 4

SHG Side Hung 4 1.0 46 4

THG Top Hung 4 1.0 46

BHG Bottom Hung 4 1.0 46

FKG Fixed Light 4 1.0 48 4 4

D E S I G N W I N D O W S PRODUCT SELECTOR

SBDdBUvalueOPEN OUT

OPEN IN

The Westcoast open in range offers a choice of side and bottom hung open in casements or tilt

and turn windows together with a range of suited fixed lights and insulated panels.

Simple to operate and with an elegant contemporary styling, the system provides slim transom

and mullion details between all types of opening windows, fixed lights and panels.

DE

SIG

N

SE

RIE

S

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T S G 1 8 0 TOP HUNG REVERSIBLE WINDOW

APPLICATION

For multi-storey buildings where cleaning and/or reglazing is to be

carried out internally.

FUNCTION

The concealed projecting reversible hinge allows the sash to be fully

reversed with all the action externally so the operation of the sash

never interferes with curtains, blinds or internal fitments.

The easy glide mechanism incorporates integral safety restrictors

which automatically engage when opening and when in the fully

reversed cleaning position. Concealed multipoint espagnolette

locking provides superior closing tightness for weatherproofing and

acoustic attenuation and offers a secure night ventilation position.

IRONMONGERY

Concealed Hinges: Top swing reversible hinges incorporating integral opening and fully reversed (cleaning position) restrictors.

Espagnolette: Concealed multipoint locking wedge bolts with night vent position receivers.

Handle: Satin anodised espagnolette handle.

A wide range of optional ironmongery items are available,

please contact us for further information.

SBD 46dB

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.

200400

600

800

1000

1200

1400

1600

1800

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

DESIGN

U1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T S G 4 5 TOP HUNG PROJECTING WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.

200400

600

800

1000

1200

1400

1600

1800

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

APPLICATION

For single storey buildings or high level balcony locations where

cleaning can be carried out from within the building and reglazing

is to be carried out externally.

FUNCTION

The window has a top hung open out action, the sash being hung on

a pair of concealed friction hinges. An opening angle of up to 80° can

be achieved to enable external surfaces to be cleaned from within the

building (max safe reach 850mm).

Concealed multipoint espagnolette locking provides superior closing

tightness for weatherproofing and acoustic attenuation and offers a

secure night ventilation position.

IRONMONGERY

Concealed Hinges: Top hung projecting friction hinges.

Espagnolette: Concealed multipoint locking wedge bolts with night vent position receivers.

Handle: Satin anodised espagnolette handle.

A wide range of optional ironmongery items are available,

please contact us for further information.

DESIGN

SBD 46dBU1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

S S G 9 0 SIDE HUNG PROJECTING WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.

200400

600

800

1000

1200

1400

1600

1800

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

APPLICATION

For single storey buildings or high level balcony locations where

cleaning can be carried out from within the building and reglazing is to

be carried out externally.

FUNCTION

The window has a side hung open out action, the sash being hung on

a pair of concealed friction hinges. An opening angle of 90° can be

achieved to enable external surfaces to be cleaned from within the

building (max safe reach 850mm).

Concealed multipoint espagnolette locking provides superior closing

tightness for weatherproofing and acoustic attenuation and offers a

secure night ventilation position.

IRONMONGERY

Concealed Hinges: Side hung projecting friction hinges.

Espagnolette: Concealed multipoint locking wedge bolts with night vent position receivers.

Handle: Satin anodised espagnolette handle.

A wide range of optional ironmongery items are available,

please contact us for further information.

DESIGN

SBD 46dBU1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

S H G SIDE HUNG WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.

200400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

APPLICATION

For all building types where there is no requirement for internal

cleaning or reglazing.

FUNCTION

The traditional side hung open out action provides large unobstructed

openings and is particularly suitable for ground floor and balcony

locations or for escape purposes.

IRONMONGERY

Butt Hinges: Satin anodised finish with integral hinge protection.

Espagnolette: Concealed multipoint locking wedge bolts with night vent position receivers.

Friction Stay: 90° handle operated hold open friction stay.

Handle: Satin anodised espagnolette handle.

A wide range of optional ironmongery items are available,

please contact us for further information.

DESIGN

SBD 46dBU1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H G TOP HUNG WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

200400

600

800

1000

1200

1400

1600

1800

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

APPLICATION

For all building types where high level windows are to be remote

operated and where there is no requirement for internal cleaning

or reglazing.

FUNCTION

The traditional top hung open out action provides large unobstructed

openings and is particularly suitable for operation via actuator or

manual remote winding gear for natural ventilation or smoke

vent purposes.

IRONMONGERY

Butt Hinges: Satin anodised finish with integral hinge protection to maximise free vent areas when fitted with manual or motorised

remote operating mechanisms.

Manual remote operating gear is supplied face fixed to the window.

Motorised remote operating mechanisms can be supplied face fixed

or concealed.

DESIGN

46dBU1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

B H G BOTTOM HUNG WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

200400

600

800

1000

1200

1400

1600

1800

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000

H

APPLICATION

For smoke control ventilation in all building types.

FUNCTION

The bottom hung open out action provides large unobstructed

openings and is particularly suitable for smoke vent purposes when

fitted with automatic remote operating mechanisms.

IRONMONGERY

Butt Hinges: Satin anodised finish with integral hinge protection to maximise free areas when fitted with motorised remote operating

smoke control mechanisms.

DESIGN

46dBU1.0

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

U1.0

F KG FIXED LIGHT WINDOW

Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.

Circular windows are available for diameters between 585mm and 1585mm. All circular windows are supplied triple glazed.

APPLICATION

Direct glazed fixed light frame to suite with open out windows

and doors.

FUNCTION

The fixed light can be used in vision areas and at spandrel locations

as part of a screen assembly when opaque glazed or when fitted with

aluminium sandwich panels.

The frames can also be fitted with fixed or moveable blade aluminium

and glass louvres.

SBD 48dB

Our fixed light frame

can also accommodate

louvres and many

types of spandrel and

sandwich panels, please

contact us for further

information.

200400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

400 600 800 1000 1200

= Min/Max sizes

W1400 1600 1800 2000 2200 2400 2600

H

DESIGN

HEAD

CILL

JAMB

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

T H E S Y S T E M S TA N DA R D S

CONSTRUCTION

Composite construction combining extruded aluminium alloy

profiles to EN AW 6060-T6 and close grained, laminated North

European Redwood, durability Class 3 as defined in BS EN 350.

Other timber species can be specified.

Timber frame and casement sections are precision machined

and assembled with pinned and glued comb joints. Mullions and

transoms are assembled with mortice and tenon joints.

External aluminium frame profiles are assembled with sealed

mitred joints by means of crimped angle cleats, bonded with PIB

tape and mechanically fixed with stainless steel pins to internal

timber members.

Windows are fully weatherstripped with EPDM or silicone slot seals.

MANUFACTURE

All windows and doors are purpose made to specification in

accordance with BS 644 : 2009 and EN 14351-1 : 2006.

APPEARANCE

Aluminium profiles are chemically pre-treated and powder coated

in any standard RAL colour in accordance with BS 6496 : 1984.

Standard gloss level 75% +/- 5%. Other gloss levels can be specified.

Timber is fully factory finished with a two or three coat spray

applied water based clear lacquer gloss level 35%, paint to NCS/

RAL specification gloss level 40% or a wide range of standard stain

finishes gloss level 35%.

GLASS AND GLAZING

Windows and doors are factory double or triple glazed to

specification in accordance with BS 6262 : 1982 with 28mm, 36mm

or 48mm dual sealed units constructed to EN 1279-2 : 2002 and

safety glazed where applicable in accordance with BS 6206 : 1981

and Building Regulation 2000 Approved Document K.

Products are typically externally bead glazed employing a drained

and ventilated glazing system with sealed units incorporating warm

edge composite super spacers and argon gas filling as standard.

Sealed units are supported on setting blocks and dry glazed with

EPDM gaskets.

All commercially available high performance glass types can

be specified to meet particular requirements for thermal

insulation, acoustic attenuation, solar control, safety, security

and fire protection where applicable.

PERFORMANCE

All Westcoast products can be considered as genuinely high

performance but frame size, glazing and other factors can, however,

directly affect performance levels. Westcoast technical support

staff should be consulted if particular data is required or for advice

on how to achieve the most cost effective solution for specific

performance targets.

WEATHERTIGHTNESS

Products comply with the following minimum performance standards

when tested in accordance with:

EN 1026 : 2000 (air permeability)

EN 1027 : 2000 (watertightness)

EN 12211 : 2000 (wind resistance)

Air Permeability: 600 Pa (Class 4)

In accordance with EN 12207 : 2000

Watertightness: 900 Pa (Class E900)

In accordance with EN 12208 : 2000

Wind Resistance: 2000 Pa (Class A5)

In accordance with EN 12210 : 2000

Exposure Category : 2000

In accordance with BS 6375 : Part 1 : 2009

THERMAL INSULATION

Products can be glazed to provide whole window ‘U’ values ranging

from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO

10077-2 : 2012.

ACOUSTIC ATTENUATION

Double and triple glazed products can be specified to achieve tested

sound reductions in a range from 31 to 48dB(Rw) in accordance with

EN ISO 10140- 2 : 2012.

SECURED BY DESIGN

All principle products have been tested to comply with PAS 24: 2016.

FIRE RESISTANCE

A selection of fixed and opening lights are classified EI45 and EI245

in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to

EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.

TESTING

A continuous programme of internal and 3rd party independent

testing ensures that Westcoast products remain at the very forefront

of fenestration technology.

INSTALLATION

Westcoast windows and doors are supplied to site fully factory

finished and glazed for installation into prepared openings.

A comprehensive design and installation service is offered.

MAINTENANCE

Maintenance is limited to periodic washing of external aluminium and

glass surfaces with water containing a mild detergent. Internal timber

should be cleaned with a damp cloth or polished.

Ironmongery items are made from corrosion resistant materials

and require only annual inspection and lubrication of appropriate

moving parts.

Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.

T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M

C-CTransom

A-AMullion

B-BMullion for fixed sidelight

D-DTransom for fixed lower light

E-ETransom for fixed upper light

156

11

1

15

6

11

1

94 94

94

94

94

94

49

49

49 94111

A A

B B

C

CD

DE

E

Drawing No. :Scale:

Detail :System :

WINDOW SYSTEMDESIGN

S0081:5 @ A4

D E S I G N O P E N O U T W I N D O W S TRANSOM & MULLION DETAILS

System: Design | Detail: Window System | Drawing No: S008 | Scale: 1:5 @ A4