design verification test report tsm/ssm tsm-125-01...
TRANSCRIPT
Project Number: Design Verification Test Report Tracking Code: TC0935--2714_Report_Rev_4
Requested by: Vico Zhao Date: 10/30/2009 Product Rev: BJ
Part #: TSM-125-01-S-DV-A/SSM-125-S-DV Lot #: N/A Tech: Kason He Eng: Vico Zhao
Part description: TSM/SSM Qty to test: 50
Test Start: 8/26/2009 Test Completed: 10/30/2009
Page 1 of 53
Design Verification Test Report
TSM/SSM
TSM-125-01-S-DV-A/SSM-125-S-DV
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 2 of 53
CERTIFICATION
All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST)
traceable standards according to IS0 10012-l and ANSI/NCSL 2540-1, as applicable.
All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be
reproduced without prior written approval of Samtec.
SCOPE To perform the following tests: Design Verification Test , See test plan
APPLICABLE DOCUMENTS
Standards: EIA Publication 364
TEST SAMPLES AND PREPARATION 1) All materials were manufactured in accordance with the applicable product specification.
2) All test samples were identified and encoded to maintain traceability throughout the test sequences.
3) After soldering, the parts to be used for LLCR and DWV/IR testing were cleaned according to TLWI-0001.
4) Either an automated cleaning procedure or an ultrasonic cleaning procedure may be used.
5) The automated procedure is used with aqueous compatible soldering materials.
6) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary.
7) Any additional preparation will be noted in the individual test sequences.
8) Solder Information: Lead free
9) Re-Flow Time/Temp: See accompanying profile.
10) Samtec Test PCBs used: PCB-102150-TST/ PCB-102151-TST
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 3 of 53
TYPICAL OVEN PROFILE (Soldering Parts to Test Boards)
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 4 of 53
FLOWCHARTS
IR & DWV
TEST GROUP A1 GROUP A2 GROUP A3 GROUP B
STEP 2 Mated Sets
2 Unmated of Part # Being
Tested
2 Unmated of Mating Part
# 2 Mated Sets
Break Down -
Pin to Pin
Break Down -
Pin to Pin
Break Down -
Pin to Pin Pin to Pin
01
DWV/Break Down
Voltage
DWV/Break Down
Voltage
DWV/Break Down
Voltage
IR & DWV at test
voltage (on both mated
sets and on each
connector unmated)
02
Thermal Aging (both
sets unmated)
03
IR & DWV at test
voltage (on both mated
sets and on each
connector unmated)
04
Cyclic Humidity (both
sets unmated)
05
IR & DWV at test
voltage (on both mated
sets and on each
connector unmated)
* - DWV on group B to be performed at Test Voltage
DWV test voltage is equal to 75% of the lowest break down voltage from group A1, A2 or A3
Thermal Aging = EIA-364-17, Test Condition 4 (105 °C)
Time Condition 'B' (250 hours)
Humidity = EIA-364-31, Test Condition B (240 Hours)
and Method III (+25° C to +65° C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
IR = EIA-364-21
DWV = EIA-364-20, Test Condition 1
Part # Being Tested:
Mating Part #:
PCB Required: PCB-102150-TST-XX
SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)
TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)
Gas Tight
TEST GROUP A
STEP 192 Points
01 LLCR-1
02 Gas Tight
03 LLCR-2
Gas Tight = EIA-364-36A
LLCR = EIA-364-23, LLCR
use Keithley 580 in the dry circuit mode, 10 mA Max
PCB Required: PCB-102150-TST-XX
Part # Being Tested: SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)
Mating Part #: TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 5 of 53
FLOWCHARTS Continued
Mating/Unmating/Gaps/Normal Force/Deflection Force
TEST GROUP A GROUP B1 GROUP B2
STEP10 Boards
(each position submitted)
Individual Contacts
(8-10 min)
Individual Contacts
(8-10 min)
01 Contact Gaps Setup Approved Setup Approved
02
Mating / Unmating (smallest,
middle, largest positions)
Normal Force (in the body and
soldered on PCB unless
otherwise specified)
Thermal Aging (Mated)
03 25 Cycles
Normal Force (in the body and
soldered on PCB unless
otherwise specified)
04 Clean w/Compressed Air
05
Mating / Unmating (smallest,
middle, largest positions)
06 25 Cycles (50 Total)
07 Clean w/Compressed Air
08
Mating / Unmating (smallest,
middle, largest positions)
09 25 Cycles (75 Total)
10 Clean w/Compressed Air
11
Mating / Unmating (smallest,
middle, largest positions)
12 25 Cycles (100 Total)
13 Clean w/Compressed Air
14
Mating / Unmating (smallest,
middle, largest positions)
15 Contact Gaps
16 Thermal Aging (Mated)
17
Mating / Unmating (smallest,
middle, largest positions)
18 Contact Gaps
19 Cyclic Humidity (Mated)
20
Mating / Unmating (smallest,
middle, largest positions)
Thermal Aging = EIA-364-17, Test Condition 4 (105 °C)
Time Condition 'B' (250 hours)
Humidity = EIA-364-31, Test Condition B (240 Hours)
and Method III (+25 °C to +65 °C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
Mating/Un-Mating Forces = EIA-364-13
Normal Force = EIA-364-04
(Perpendicular) displacement Force = 12.7 mm/min +/- 6 mm/min
Spec is 50 N @ 1 mm displacement
Contact Gaps/Height - No standard method. Usually measured optically
PCB Required:
PCB-102152-TST-XX/PCB-102145-TST-XX/PCB-
102151-TST-XX
SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)
TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)
Part # Being Tested:
Mating Part #:
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 6 of 53
FLOWCHARTS Continued
Durability/Thermal Age/Cyclic Humidity
TEST GROUP A
STEP 192 Points
100 Cycles
01 LLCR-1
02 100 Cycles
03 Clean Mating Interface
04 LLCR-2
05
Thermal Age (Mated
and undisturbed)
06 LLCR-3
07
Cyclic Humidity
(Mated and
undisturbed)
08 LLCR-4
Thermal Aging = EIA-364-17, Test Condition 4, 105 deg C;
Time Condition 'B' (250 hours)
Humidity =EIA-364-31, Test Condition B (240 Hours)
and Method III (+25 ° C to +65 ° C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
LLCR = EIA-364-23, LLCR
use Keithley 580 in the dry circuit mode, 10 mA Max
PCB Required: PCB-102150-TST-XX
SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)
TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)
Part # Being Tested:
Mating Part #:
Current Carrying Capacity 3 Mated Assemblies Each
TEST GROUP A GROUP B GROUP C GROUP D GROUP E
STEP 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies
2 CONTACT POWERED 4 CONTACTS POWERED 6 CONTACTS POWERED 8 CONTACTS POWERED ALL CONTACTS POWERED
01 CCC CCC CCC CCC CCC
CCC, Temp rise = EIA-364-70
(TIN PLATING) - Tabulate calculated current at RT, 65° C, 75° C and 95° C
after derating 20% and based on 105° C
(GOLD PLATING) - Tabulate calculated current at RT, 85° C, 95° C and 115° C
after derating 20% and based on 125° C
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 7 of 53
ATTRIBUTE DEFINITIONS The following is a brief, simplified description of attributes.
THERMAL: 1) EIA-364-17, Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors.
2) Test Condition 4 at 105° C.
3) Test Time Condition B for 250 hours.
4) All test samples are pre-conditioned at ambient.
5) All test samples are exposed to environmental stressing in the mated condition.
HUMIDITY: 1) Reference document: EIA-364-31, Humidity Test Procedure for Electrical Connectors.
2) Test Condition B, 240 Hours.
3) Method III, +25° C to + 65° C, 90% to 98% Relative Humidity excluding sub-cycles 7a and 7b.
4) All samples are pre-conditioned at ambient.
5) All test samples are exposed to environmental stressing in the mated condition.
TEMPERATURE RISE (Current Carrying Capacity, CCC): 1) EIA-364-70, Temperature Rise versus Current Test Procedure for Electrical Connectors and Sockets.
2) When current passes through a contact, the temperature of the contact increases as a result of I2R (resistive)
heating.
3) The number of contacts being investigated plays a significant part in power dissipation and therefore
temperature rise.
4) The size of the temperature probe can affect the measured temperature.
5) Copper traces on PC boards will contribute to temperature rise:
a. Self heating (resistive)
b. Reduction in heat sink capacity affecting the heated contacts
6) A de-rating curve, usually 20%, is calculated.
7) Calculated de-rated currents at three temperature points are reported:
a. Ambient
b. 80о C
c. 95о C
d. 115о C
8) Typically, neighboring contacts (in close proximity to maximize heat build up) are energized.
9) The thermocouple (or temperature measuring probe) will be positioned at a location to sense the maximum
temperature in the vicinity of the heat generation area.
10) A computer program, TR 803.exe, ensures accurate stability for data acquisition.
11) Hook-up wire cross section is larger than the cross section of any connector leads/PC board traces, jumpers,
etc.
12) Hook-up wire length is longer than the minimum specified in the referencing standard.
CONTACT GAPS: 1) Gaps above the surrounding plastic surface were measured before and after stressing the contacts (e.g.
thermal aging, mechanical cycling, etc.).
2) Typically, all contacts on the connector are measured.
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 8 of 53
ATTRIBUTE DEFINITIONS Continued The following is a brief, simplified description of attributes.
MATING/UNMATING: 1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors.
2) The full insertion position was to within 0.003” to 0.004” of the plug bottoming out in the receptacle to
prevent damage to the system under test.
3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling.
NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING): 1) Reference document: EIA-364-04, Normal Force Test Procedure for Electrical Connectors.
2) The contacts shall be tested in the loose state, not inserted in connector housing.
3) The contacts shall be prepared to allow access to the spring member at the same attitude and deflection level
as would occur in actual use.
4) In the event that portions of the contact prevent insertion of the test probe and/or deflection of the spring
member under evaluation, said material shall be removed leaving the appropriate contact surfaces exposed.
5) In the case of multi-tine contacts, each tine shall be tested independently on separate samples as required.
6) The connector housing shall be simulated, if required, in order to provide an accurate representation of the
actual contact system performance.
7) A holding fixture shall be fashioned to allow the contact to be properly deflected.
8) Said holding fixture shall be mounted on a floating, adjustable, X-Y table on the base of the Dillon TC2,
computer controlled test stand with a deflection measurement system accuracy of 5 µm (0.0002”).
9) The probe shall be attached to a Dillon P/N 49761-0105, 5 N (1.1 Lb) load cell providing an accuracy of
0.2%.
10) The nominal deflection rate shall be 5 mm (0.2”)/minute.
11) Unless otherwise noted a minimum of five contacts shall be tested.
12) The force/deflection characteristic to load and unload each contact shall be repeated five times.
13) The system shall utilize the TC2 software in order to acquire and record the test data.
14) The permanent set of each contact shall be measured within the TC2 software.
15) The acquired data shall be graphed with the deflection data on the X-axis and the force data on the Y-axis
and a print out will be stored with the Tracking Code paperwork.
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 9 of 53
ATTRIBUTE DEFINITIONS Continued The following is a brief, simplified description of attributes.
INSULATION RESISTANCE (IR): To determine the resistance of insulation materials to leakage of current through or on the surface of these
materials when a DC potential is applied.
1) PROCEDURE:
a. Reference document: EIA-364-21, Insulation Resistance Test Procedure for Electrical Connectors.
b. Test Conditions:
i. Between Adjacent Contacts or Signal-to-Ground
ii. Electrification Time 2.0 minutes
iii. Test Voltage (500 VDC) corresponds to calibration settings for measuring resistances.
2) MEASUREMENTS:
3) When the specified test voltage is applied (VDC), the insulation resistance shall not be less than 5000
megohms.
DIELECTRIC WITHSTANDING VOLTAGE (DWV): To determine if the sockets can operate at its rated voltage and withstand momentary over potentials due to
switching, surges, and other similar phenomenon. Separate samples are used to evaluate the effect of
environmental stresses so not to influence the readings from arcing that occurs during the measurement
process.
1) PROCEDURE:
a. Reference document: EIA-364-20, Withstanding Voltage Test Procedure for Electrical Connectors.
b. Test Conditions:
i. Between Adjacent Contacts or Signal-to-Ground
ii. Rate of Application 500 V/Sec
iii. Test Voltage (VAC) until breakdown occurs
2) MEASUREMENTS/CALCULATIONS
a. The breakdown voltage shall be measured and recorded.
b. The dielectric withstanding voltage shall be recorded as 75% of the minimum breakdown voltage.
c. The working voltage shall be recorded as one-third (1/3) of the dielectric withstanding voltage (one-
fourth of the breakdown voltage).
LLCR: 1) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
2) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
3) The following guidelines are used to categorize the changes in LLCR as a result from stressing
a. <= +5.0 mOhms: ----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms: ------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 10 of 53
ATTRIBUTE DEFINITIONS Continued The following is a brief, simplified description of attributes.
GAS TIGHT: To provide method for evaluating the ability of the contacting surfaces in preventing penetration of harsh
vapors which might lead to oxide formation that may degrade the electrical performance of the contact
system.
1) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
2) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
3) The following guidelines are used to categorize the changes in LLCR as a result from stressing
a. <= +5.0 mOhms: ----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms: ------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
4) Procedure:
a. Reference document: EIA-364-36, Test Procedure for Determination of Gas-Tight Characteristics
for Electrical Connectors, Sockets and/or Contact Systems.
b. Test Conditions:
i. Class II--- Mated pairs of contacts assembled to their plastic housings.
ii. Reagent grade Nitric Acid shall be used of sufficient volume to saturate the test chamber
iii. The ratio of the volume of the test chamber to the surface area of the acid shall be 10:1.
iv. The chamber shall be saturated with the vapor for at least 15 minutes before samples are
added.
v. Exposure time, 55 to 65 minutes.
vi. The samples shall be no closer to the chamber walls than 1 inches and no closer to the
surface of the acid than 3 inches.
vii. The samples shall be dried after exposure for a minimum of 1 hour.
viii. Drying temperature 50о C
ix. The final LLCR shall be conducted within 1 hour after drying.
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 11 of 53
RESULTS
Temperature Rise, CCC at a 20% de-rating
CCC for a 30°C Temperature Rise ----------------------- 5.4A per contact with 2 adjacent contacts powered
CCC for a 30°C Temperature Rise ----------------------- 3.9A per contact with 4 adjacent contacts powered
CCC for a 30°C Temperature Rise ----------------------- 3.4A per contact with 6 adjacent contacts powered
CCC for a 30°C Temperature Rise ----------------------- 3.2A per contact with 8 adjacent contacts powered
CCC for a 30°C Temperature Rise ----------------------- 2.0A per contact with all adjacent contacts powered
Contact Gaps
2 Position
Initial
o Min -------------------------------------------------- 0.0161 in
o Max ------------------------------------------------- 0.0180 in
After 100 Cycles
o Min -------------------------------------------------- 0.0171 in
o Max ------------------------------------------------- 0.0184 in
Thermal
o Min -------------------------------------------------- 0.0175 in
o Max ------------------------------------------------- 0.0192 in
20 Position
Initial
o Min -------------------------------------------------- 0.0164 in
o Max ------------------------------------------------- 0.0178 in
After 100 Cycles
o Min -------------------------------------------------- 0.0169 in
o Max ------------------------------------------------- 0.0183 in
Thermal
o Min -------------------------------------------------- 0.0176 in
o Max ------------------------------------------------- 0.0187 in
36 Position
Initial
o Min -------------------------------------------------- 0.0162 in
o Max ------------------------------------------------- 0.0181 in
After 100 Cycles
o Min -------------------------------------------------- 0.0163 in
o Max ------------------------------------------------- 0.0184 in
Thermal
o Min -------------------------------------------------- 0.0172 in
o Max ------------------------------------------------- 0.0187 in
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 12 of 53
RESULTS Continued Mating – Unmating Forces
2 Position
Initial
o Mating
Min --------------------------------------- 0.80 Lbs
Max --------------------------------------- 1.00 Lbs
o Unmating
Min --------------------------------------- 0.45 Lbs
Max --------------------------------------- 0.90 Lbs
After 100 Cycles
o Mating
Min --------------------------------------- 0.63 Lbs
Max --------------------------------------- 0.70 Lbs
o Unmating
Min --------------------------------------- 0.43 Lbs
Max --------------------------------------- 0.60 Lbs
Thermal
o Mating
Min --------------------------------------- 0.54 Lbs
Max --------------------------------------- 0.60 Lbs
o Unmating
Min --------------------------------------- 0.45 Lbs
Max --------------------------------------- 0.50 Lbs
Humidity
o Mating
Min --------------------------------------- 0.50 Lbs
Max --------------------------------------- 0.60 Lbs
o Unmating
Min --------------------------------------- 0.44 Lbs
Max --------------------------------------- 0.50 Lbs
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 13 of 53
RESULTS Continued 20 Position
Initial
o Mating
Min --------------------------------------- 7.44 Lbs
Max --------------------------------------- 9.60 Lbs
o Unmating
Min --------------------------------------- 6.60 Lbs
Max --------------------------------------- 8.30 Lbs
After 100 Cycles
o Mating
Min --------------------------------------- 6.22 Lbs
Max --------------------------------------- 8.90 Lbs
o Unmating
Min --------------------------------------- 5.58 Lbs
Max --------------------------------------- 6.80 Lbs
Thermal
o Mating
Min --------------------------------------- 6.27 Lbs
Max --------------------------------------- 8.00 Lbs
o Unmating
Min --------------------------------------- 5.15 Lbs
Max --------------------------------------- 6.40 Lbs
Humidity
o Mating
Min --------------------------------------- 6.11 Lbs
Max --------------------------------------- 8.00 Lbs
o Unmating
Min --------------------------------------- 5.14 Lbs
Max --------------------------------------- 6.90 Lbs
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 14 of 53
RESULTS Continued
36 Position
Initial
o Mating
Min -------------------------------------- 15.39 Lbs
Max -------------------------------------- 20.80 Lbs
o Unmating
Min -------------------------------------- 12.79 Lbs
Max -------------------------------------- 14.50 Lbs
After 100 Cycles
o Mating
Min -------------------------------------- 14.18 Lbs
Max -------------------------------------- 17.10 Lbs
o Unmating
Min -------------------------------------- 10.53 Lbs
Max -------------------------------------- 11.90 Lbs
Thermal
o Mating
Min -------------------------------------- 12.44 Lbs
Max -------------------------------------- 14.20 Lbs
o Unmating
Min -------------------------------------- 10.19 Lbs
Max -------------------------------------- 12.00 Lbs
Humidity
o Mating
Min -------------------------------------- 12.19 Lbs
Max -------------------------------------- 14.90 Lbs
o Unmating
Min -------------------------------------- 10.23 Lbs
Max -------------------------------------- 12.40 Lbs
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 15 of 53
RESULTS Continued
Normal Force at 0.12 mm deflection
Initial
o Min ----------------------------------------------- 130.00 gf Set ----- 0.001 mm
o Max ---------------------------------------------- 148.00 gf Set ----- 0.010 mm
Thermal
o Min ----------------------------------------------- 122.00 gf Set ----- 0.000 mm
o Max ---------------------------------------------- 146.00 gf Set ----- 0.010 mm
Insulation Resistance minimums, IR
Initial
o Mated ------------------------------------------------ 10000Meg Ω ------------------------- Pass
o Unmated -------------------------------------------- 10000Meg Ω ------------------------ Pass
Thermal
o Mated ------------------------------------------------ 10000Meg Ω ------------------------ Pass
o Unmated -------------------------------------------- 10000Meg Ω ------------------------ Pass
Humidity
o Mated ------------------------------------------------ 10000Meg Ω ------------------------ Pass
o Unmated -------------------------------------------- 10000Meg Ω ------------------------ Pass
Dielectric Withstanding Voltage minimums, DWV
Breakdown ------------------------------------- 1440 VAC
DWV --------------------------------------------- 1080 VAC
Working voltage --------------------------------- 360 VAC
Initial ------------------------------------- Passed
Thermal ------------------------------------- Passed
Humidity ------------------------------------- Passed
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 16 of 53
RESULTS Continued
LLCR Durability (192 LLCR test points)
Initial ----------------------------------------------------------------- 6.6mOhms Max
Durability, 100 Cycles
o <= +5.0 mOhms ---------------------------------- 192 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
Thermal
o <= +5.0 mOhms ---------------------------------- 192 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
o
Humidity
o <= +5.0 mOhms ---------------------------------- 191 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 1 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
LLCR Gas Tight (192 LLCR test points)
Initial ----------------------------------------------------------------- 6.1mOhms Max
Gas-Tight
o <= +5.0 mOhms ---------------------------------- 192 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 17 of 53
DATA SUMMARIES
TEMPERATURE RISE (Current Carrying Capacity, CCC):
1) High quality thermocouples whose temperature slopes track one another were used for temperature
monitoring. 2) The thermocouples were placed at a location to sense the maximum temperature generated during testing. 3) Temperature readings recorded are those for which three successive readings, 15 minutes apart, differ less
than 1° C (computer controlled data acquisition).
4) Adjacent contacts were powered:
a. Linear configuration with 2 adjacent conductors/contacts powered
TC0935--2714
2(2x1) Contacts in Linear series
Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A
12.812.8
10.310.3
7.87.8
6.36.36.76.7
5.45.4
3.73.7
2.92.9
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
20 40 60 80 100 120 140
Ambient Temperature, ° C
Max
imu
m C
urr
en
t, A
mp
per
Co
nta
ct
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
85 ° C Peak Amp
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
Limit
115 ° C Peak Amp
115 ° C Derated Amp
115 ° C
Room Temp125° C
Limit
Useful Range
Room Temp=23.1 C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 5.4Amps
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 18 of 53
DATA SUMMARIES Continued
b. Linear configuration with 4 adjacent conductors/contacts powered
TC0935--2714
4(2x2) Contacts in Linear series
Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A
9.29.2
7.47.4
5.75.7
4.64.64.94.9
3.93.9
2.82.8
2.22.2
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
20 40 60 80 100 120 140
Ambient Temperature, ° C
Ma
xim
um
Cu
rre
nt,
Am
p p
er
Co
nta
ct
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
85 ° C Peak Amp
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
Limit
115 ° C Peak Amp
115 ° C Derated Amp
115 ° C
Room Temp125° C
Limit
Useful Range
Room Temp= 25.2 C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 3.9 Amps
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 19 of 53
DATA SUMMARIES Continued
c. Linear configuration with 6 adjacent conductors/contacts powered
TC0935--2714
6(2x3) Contacts in Linear series
Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A
8.18.1
6.56.5
5.05.0
4.04.04.34.3
3.43.4
2.42.4
1.91.9
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
20 40 60 80 100 120 140
Ambient Temperature, ° C
Ma
xim
um
Cu
rre
nt,
Am
p p
er
Co
nta
ct
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
85 ° C Peak Amp
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
Limit
115 ° C Peak Amp
115 ° C Derated Amp
115 ° C
Room Temp125° C
Limit
Useful Range
Room Temp=23.4 C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 3.4Amps
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 20 of 53
DATA SUMMARIES Continued
d. Linear configuration with 8 adjacent conductors/contacts powered
TC0935--2714
8(2x4) Contacts in Linear series
Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A
7.57.5
6.06.0
4.64.6
3.73.73.93.9
3.23.2
2.22.2
1.71.7
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
20 40 60 80 100 120 140
Ambient Temperature, ° C
Max
imu
m C
urr
en
t, A
mp
per
Co
nta
ct
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
85 ° C Peak Amp
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
Limit
115 ° C Peak Amp
115 ° C Derated Amp
115 ° C
Room Temp125° C
Limit
Useful Range
Room Temp= 21.9 C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 3.2Amps
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 21 of 53
DATA SUMMARIES Continued
e. Linear configuration with all adjacent conductors/contacts powered
TC0935--2714
72(all) Contacts in Linear series
Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A
5.05.0
4.04.0
3.03.0
2.42.42.52.5
2.02.0
1.31.3
1.11.1
0.0
1.0
2.0
3.0
4.0
5.0
6.0
20 40 60 80 100 120 140
Ambient Temperature, ° C
Max
imu
m C
urr
en
t, A
mp
per
Co
nta
ct
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
85 ° C Peak Amp
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
Limit
115 ° C Peak Amp
115 ° C Derated Amp
115 ° C
Room Temp125° C
Limit
Useful Range
Room Temp= 23.8 C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 2.0 Amps
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 22 of 53
DATA SUMMARIES Continued
CONTACT GAPS:
2 Position
Units: inches Units: inches Units: inches
0.0161 0.0171 0.0175
0.0180 0.0184 0.0192
0.0172 0.0179 0.0183
0.0003 0.0003 0.0004
40 40 40
St. Dev.St. Dev.
After Thermal
Count
MinimumMinimum
Maximum
Average
Maximum
Average
Count
After 100 Cycles
St. Dev.
Count
Initial
Minimum
Maximum
Average
20 Position
Units: inches Units: inches Units: inches
0.0164 0.0169 0.0176
0.0178 0.0183 0.0187
0.0172 0.0176 0.0181
0.0002 0.0002 0.0002
400 400 400
St. Dev.St. Dev.
After Thermal
Count
MinimumMinimum
Maximum
Average
Maximum
Average
Count
After 100 Cycles
St. Dev.
Count
Initial
Minimum
Maximum
Average
36 Position
Units: inches Units: inches Units: inches
0.0162 0.0163 0.0172
0.0181 0.0184 0.0187
0.0175 0.0177 0.0180
0.0003 0.0003 0.0003
720 720 720
St. Dev.St. Dev.
After Thermal
Count
MinimumMinimum
Maximum
Average
Maximum
Average
Count
After 100 Cycles
St. Dev.
Count
Initial
Minimum
Maximum
Average
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 23 of 53
DATA SUMMARIES Continued
MATING/UNMATING:
2 Position
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 12.8 0.80 7.2 0.45 11.5 0.72 7.0 0.44
Maximum 15.2 1.0 13.8 0.9 13.3 0.8 11.5 0.7
Average 13.5 0.8 10.8 0.7 12.3 0.8 9.9 0.6
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 11.2 0.70 6.9 0.43 10.7 0.67 6.9 0.43
Maximum 12.2 0.8 10.9 0.7 11.5 0.7 10.1 0.6
Average 11.6 0.7 9.3 0.6 11.1 0.7 8.9 0.6
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 10.1 0.63 6.9 0.43 8.6 0.54 7.2 0.45
Maximum 11.5 0.7 9.9 0.6 10.2 0.6 8.3 0.5
Average 10.7 0.7 8.8 0.5 9.3 0.6 7.9 0.5
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 8.0 0.50 7.0 0.44
Maximum 9.8 0.6 7.8 0.5
Average 8.8 0.5 7.5 0.5
After Humidity
Mating Unmating
After 100 Cycles
After 50 Cycles
Mating
After Thermals
Mating Unmating Mating Unmating
Unmating
After 25 Cycles
Mating Mating Unmating
Initial
After 75 Cycles
Mating UnmatingUnmating
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 24 of 53
DATA SUMMARIES Continued
20 Position
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 119.0 7.44 105.6 6.60 106.7 6.67 97.6 6.10
Maximum 153.8 9.6 133.0 8.3 150.2 9.4 112.3 7.0
Average 132.5 8.3 118.0 7.4 127.4 8.0 104.9 6.6
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 104.6 6.54 96.3 6.02 102.6 6.41 95.8 5.99
Maximum 146.1 9.1 109.3 6.8 144.3 9.0 106.7 6.7
Average 125.0 7.8 103.1 6.4 123.3 7.7 101.5 6.3
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 99.5 6.22 93.6 5.85 100.3 6.27 82.4 5.15
Maximum 141.9 8.9 108.0 6.8 127.2 8.0 102.1 6.4
Average 121.5 7.6 100.1 6.3 111.8 7.0 91.6 5.7
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 97.8 6.11 82.2 5.14
Maximum 128.0 8.0 109.8 6.9
Average 110.0 6.9 92.8 5.8
After 75 Cycles
Mating UnmatingUnmating
Unmating
After 25 Cycles
Mating Mating Unmating
Initial
After Thermals
Mating Unmating Mating Unmating
After Humidity
Mating Unmating
After 100 Cycles
After 50 Cycles
Mating
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 25 of 53
DATA SUMMARIES Continued
36 Position
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 246.2 15.39 204.6 12.79 240.5 15.03 187.7 11.73
Maximum 333.3 20.8 232.2 14.5 310.6 19.4 217.9 13.6
Average 274.6 17.2 218.8 13.7 263.2 16.4 203.8 12.7
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 236.6 14.79 174.4 10.90 234.1 14.63 169.3 10.58
Maximum 289.8 18.1 197.0 12.3 281.3 17.6 194.2 12.1
Average 255.4 16.0 188.0 11.7 249.2 15.6 184.2 11.5
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 226.9 14.18 168.5 10.53 199.0 12.44 163.0 10.19
Maximum 274.1 17.1 190.1 11.9 227.4 14.2 191.4 12.0
Average 240.0 15.0 181.0 11.3 207.8 13.0 179.8 11.2
Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)
Minimum 195.0 12.19 163.7 10.23
Maximum 238.6 14.9 198.6 12.4
Average 209.3 13.1 183.6 11.5
After Humidity
Mating Unmating
After 100 Cycles
After 50 Cycles
Mating
After Thermals
Mating Unmating Mating Unmating
Unmating
After 25 Cycles
Mating Mating Unmating
Initial
After 75 Cycles
Mating UnmatingUnmating
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 26 of 53
DATA SUMMARIES Continued
NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING): 1) Calibrated force gauges are used along with computer controlled positioning equipment.
2) Typically, 8-10 readings are taken and the averages reported.
0.040 0.060 0.080 0.100 0.120 SET
Averages 48.77 71.38 94.15 116.23 139.00 0.0058
Min 43.00 64.00 88.00 109.00 130.00 0.0010
Max 55.00 79.00 101.00 125.00 148.00 0.0100
St. Dev 3.37 4.11 4.26 4.66 5.46 0.0033
Count 13 13 13 13 13 13
InitialDeflections in mm Forces in Grams
0.040 0.060 0.080 0.100 0.120 SET
Averages 47.85 71.31 92.85 114.46 138.08 0.0025
Min 40.00 62.00 81.00 101.00 122.00 0.0000
Max 53.00 78.00 102.00 125.00 146.00 0.0100
St. Dev 4.24 5.12 6.45 6.50 6.55 0.0032
Count 13 13 13 13 13 13
ThermalDeflections in mm, Forces in Grams
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 27 of 53
DATA SUMMARIES Continued
INSULATION RESISTANCE (IR):
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 28 of 53
DATA SUMMARIES Continued
LLCR: 1) A total of 192 points were measured.
2) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
3) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
4) The following guidelines are used to categorize the changes in LLCR as a result from stressing.
a. <= +5.0 mOhms: ----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms -------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
Date Sep. 07 2009 Sep. 07 2009 Sep. 18 2009 Sep. 29 2009
Room Temp C 25 27 24 21
RH 51% 49% 60% 54%
Name Kason He Kason He Kason He Kason He
mOhm values Actual Delta Delta Delta
Initial 100 Cycles Thermal Humidity
Average 5.2 -0.1 0.1 0.5
St. Dev. 0.5 0.3 0.4 1.1
Min 4.1 -1.3 -1.3 -1.4
Max 6.6 1.5 1.6 5.7
Count 192 192 192 192
8
24
Stable Minor Acceptable Marginal Unstable Open
100 Cycles 192 0 0 0 0 0
Thermal 192 0 0 0 0 0
Humidity 191 1 0 0 0 0
How many samples are being tested?
How many contacts are on each board?
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 29 of 53
DATA SUMMARIES Continued
GAS TIGHT: 1) A total of 192 points were measured.
2) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
3) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
4) The following guidelines are used to categorize the changes in LLCR as a result from stressing.
a. <= +5.0 mOhms: ----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms: ------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
Date Sep. 07 2009 Sep. 16 2009
Room Temp C 25 26
RH 51% 64%
Name Kason He Kason He
mOhm values Actual Delta
Initial Gas Tight
Average 5.2 -0.1
St. Dev. 0.4 0.2
Min 4.1 -0.9
Max 6.1 0.4
Count 192 192
8
24
Stable Minor Acceptable Marginal Unstable Open
Gas Tight 192 0 0 0 0 0
How many samples are being tested?
How many contacts are on each board?
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 30 of 53
DATA
CONTACT GAPS:
2 Position
Initial
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.017344 0.016865 0.016909 0.017418 0.017053 0.01759 0.017154 0.017592 0.017125 0.016972
2 0.017787 0.01713 0.017016 0.017245 0.01772 0.016979 0.017099 0.017238 0.016934 0.017008
3 0.017235 0.017388 0.016113 0.017345 0.017322 0.017268 0.017125 0.017378 0.017988 0.017327
4 0.017307 0.016806 0.01698 0.017155 0.017307 0.017429 0.017153 0.017207 0.017042 0.017161
After 100 cycles
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.018044 0.018026 0.018094 0.017994 0.017863 0.018118 0.018089 0.018071 0.018188 0.017702
2 0.017263 0.01796 0.018165 0.017507 0.017694 0.018398 0.018122 0.017862 0.018254 0.018077
3 0.01772 0.017496 0.018111 0.017117 0.017649 0.018422 0.017531 0.018189 0.017777 0.018055
4 0.017674 0.017741 0.017898 0.017501 0.017743 0.018038 0.01758 0.017844 0.017698 0.017477
After Thermal
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.018196 0.019164 0.017844 0.018302 0.018263 0.017489 0.018013 0.01838 0.018599 0.018593
2 0.018344 0.019017 0.017508 0.01834 0.018356 0.017788 0.018373 0.018221 0.018648 0.018159
3 0.018136 0.019181 0.018557 0.018283 0.017929 0.017679 0.018422 0.018064 0.018217 0.018839
4 0.017678 0.018745 0.018329 0.018234 0.017975 0.017748 0.017991 0.018419 0.018318 0.019111
20 Position
Initial
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.017511 0.017468 0.017081 0.017269 0.017344 0.016998 0.017494 0.01695 0.016899 0.017324
2 0.016682 0.01705 0.017091 0.016912 0.016965 0.017411 0.017517 0.017239 0.017373 0.017319
3 0.017393 0.016819 0.017183 0.017269 0.016973 0.017262 0.017232 0.017236 0.017015 0.017369
4 0.016916 0.017049 0.017076 0.016866 0.017406 0.017436 0.017271 0.01741 0.017342 0.017372
5 0.017606 0.016648 0.017275 0.017252 0.017284 0.017172 0.017154 0.017054 0.017029 0.017387
6 0.016836 0.017017 0.017103 0.016914 0.017051 0.017323 0.017338 0.01737 0.017553 0.017333
7 0.017476 0.017159 0.017187 0.017315 0.01704 0.016915 0.017261 0.017162 0.016962 0.017445
8 0.016765 0.017014 0.017196 0.016916 0.017035 0.017311 0.016778 0.017356 0.017245 0.017331
9 0.017576 0.017527 0.017249 0.017148 0.017637 0.017096 0.01727 0.016994 0.017049 0.017394
10 0.016739 0.016839 0.017118 0.016809 0.017658 0.017337 0.017335 0.017472 0.01728 0.01732
11 0.017434 0.016711 0.017289 0.017203 0.017424 0.017233 0.016916 0.017051 0.017092 0.017422
12 0.01682 0.017079 0.017249 0.016922 0.017067 0.017227 0.017227 0.017224 0.017263 0.017141
13 0.017536 0.017291 0.017261 0.017231 0.01722 0.017128 0.017355 0.016966 0.01698 0.017418
14 0.01672 0.016638 0.017205 0.016877 0.017106 0.017239 0.01717 0.017432 0.01733 0.017207
15 0.017553 0.016724 0.017283 0.017357 0.017145 0.017046 0.017321 0.016884 0.017098 0.017334
16 0.016848 0.01733 0.01703 0.016899 0.016876 0.017197 0.016625 0.017272 0.017475 0.017384
17 0.016651 0.016625 0.017349 0.017223 0.01698 0.017163 0.016927 0.016935 0.016908 0.017534
18 0.016739 0.016601 0.016954 0.016918 0.016896 0.017312 0.017367 0.017394 0.017372 0.017335
19 0.017448 0.016781 0.017359 0.017349 0.01729 0.017031 0.017232 0.016945 0.017004 0.017186
20 0.016816 0.016961 0.016997 0.016825 0.016704 0.017263 0.017231 0.017137 0.01748 0.017389
21 0.016873 0.016559 0.017311 0.016876 0.017382 0.017209 0.017469 0.017235 0.0173 0.017042
22 0.017336 0.017042 0.017284 0.017373 0.017198 0.017036 0.017283 0.016814 0.016977 0.017409
23 0.016849 0.016796 0.017345 0.016923 0.017172 0.017257 0.017279 0.017303 0.017274 0.01707
24 0.017462 0.016777 0.017403 0.01721 0.016913 0.016938 0.017294 0.01678 0.016897 0.017625
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 31 of 53
25 0.016814 0.016817 0.01727 0.01682 0.017072 0.017199 0.017394 0.017284 0.017161 0.01726
26 0.017475 0.01699 0.01724 0.017294 0.016926 0.01689 0.017316 0.016912 0.016908 0.017327
27 0.016725 0.016504 0.017201 0.016953 0.017041 0.017178 0.017406 0.017254 0.017215 0.017248
28 0.017527 0.01655 0.017281 0.017454 0.016927 0.017032 0.0174 0.016927 0.016982 0.017507
29 0.016779 0.016491 0.017156 0.016996 0.017431 0.017212 0.017319 0.017109 0.017235 0.017316
30 0.017387 0.016598 0.017476 0.017512 0.016888 0.017088 0.017316 0.016938 0.017035 0.017431
31 0.016702 0.016433 0.01722 0.016915 0.017037 0.017256 0.017443 0.017125 0.017355 0.017099
32 0.0175 0.017324 0.01735 0.017514 0.016851 0.01706 0.017451 0.016934 0.016948 0.017329
33 0.01667 0.01753 0.017001 0.016784 0.017146 0.017273 0.017465 0.017215 0.017239 0.017288
34 0.01744 0.017491 0.01755 0.017447 0.017171 0.016982 0.017278 0.016898 0.017015 0.017297
35 0.016685 0.017165 0.01701 0.016872 0.017125 0.017372 0.017423 0.017304 0.017293 0.01742
36 0.017406 0.016781 0.017349 0.017347 0.01753 0.017056 0.017388 0.017061 0.016855 0.017534
37 0.01663 0.017374 0.017432 0.016964 0.017371 0.017201 0.017491 0.017311 0.017443 0.017237
38 0.017447 0.017085 0.01781 0.017378 0.017425 0.016938 0.017259 0.016927 0.017058 0.01735
39 0.016659 0.017174 0.017326 0.017034 0.017085 0.017235 0.017396 0.017237 0.017315 0.017069
40 0.017323 0.016739 0.017234 0.017365 0.017251 0.016962 0.0173 0.016974 0.017028 0.017253
After 100 cycles
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.018323 0.017721 0.018022 0.017911 0.017541 0.017552 0.017771 0.017774 0.017472 0.017964
2 0.017502 0.017587 0.017742 0.017527 0.017912 0.017918 0.018072 0.017886 0.017886 0.017914
3 0.018088 0.017826 0.017792 0.017918 0.017752 0.017757 0.017884 0.017813 0.017521 0.017936
4 0.017581 0.017464 0.017689 0.017348 0.017899 0.017888 0.017738 0.017967 0.01779 0.017963
5 0.01802 0.017785 0.017688 0.017626 0.017498 0.0175 0.017661 0.017479 0.01743 0.017814
6 0.017319 0.017322 0.017462 0.017305 0.01761 0.017617 0.017712 0.017723 0.01783 0.017729
7 0.017798 0.01758 0.017498 0.017639 0.017365 0.017379 0.017612 0.017474 0.017258 0.017758
8 0.017166 0.017344 0.017434 0.017265 0.017564 0.01757 0.017638 0.017702 0.017545 0.017618
9 0.017827 0.017498 0.017515 0.017514 0.01736 0.017368 0.017512 0.017285 0.017381 0.017717
10 0.017025 0.017352 0.017432 0.017147 0.017561 0.017552 0.017586 0.017717 0.017529 0.017566
11 0.017695 0.017546 0.01753 0.017527 0.017534 0.01754 0.017407 0.017334 0.017358 0.017648
12 0.01711 0.017226 0.01754 0.017263 0.017474 0.017482 0.017485 0.017501 0.01752 0.01743
13 0.017845 0.01775 0.017532 0.017543 0.017441 0.017449 0.017567 0.017312 0.017314 0.017746
14 0.017087 0.01722 0.017459 0.017236 0.017573 0.01758 0.017463 0.017744 0.017596 0.017538
15 0.017969 0.017668 0.017596 0.017722 0.01756 0.017567 0.017428 0.017356 0.017529 0.017674
16 0.017169 0.017309 0.017532 0.017349 0.017615 0.017628 0.017803 0.01762 0.0177 0.017743
17 0.017955 0.017674 0.017786 0.017645 0.017729 0.01774 0.017629 0.017396 0.017293 0.017968
18 0.017145 0.017461 0.017585 0.017504 0.017718 0.01772 0.017881 0.017707 0.017677 0.017911
19 0.018014 0.017773 0.01778 0.017973 0.017678 0.01769 0.017919 0.017403 0.017508 0.017806
20 0.017405 0.017739 0.018086 0.017758 0.017964 0.017994 0.017888 0.0176 0.017911 0.01819
21 0.017628 0.017274 0.017882 0.017628 0.01766 0.017661 0.017855 0.01783 0.017774 0.017997
22 0.017997 0.017506 0.017791 0.017854 0.017614 0.017613 0.018024 0.017505 0.017533 0.018031
23 0.017513 0.017159 0.017833 0.017456 0.017622 0.01763 0.017952 0.017848 0.017702 0.01775
24 0.017897 0.017935 0.017804 0.017481 0.017499 0.017503 0.017822 0.017468 0.017419 0.018045
25 0.017159 0.017105 0.017639 0.017103 0.017478 0.01748 0.017711 0.017617 0.017513 0.017612
26 0.017698 0.017525 0.017568 0.01747 0.017284 0.017285 0.017515 0.017198 0.017342 0.017651
27 0.017008 0.017115 0.017533 0.017183 0.017361 0.017362 0.017684 0.017465 0.017467 0.017558
28 0.01769 0.017493 0.01753 0.017584 0.017307 0.017308 0.017595 0.01721 0.017306 0.017739
29 0.016983 0.017046 0.017369 0.017174 0.017401 0.017407 0.017541 0.01733 0.01745 0.017556
30 0.017572 0.017965 0.017611 0.017678 0.017333 0.017324 0.017495 0.017165 0.017302 0.017637
31 0.016921 0.017106 0.017468 0.017123 0.017483 0.017487 0.017594 0.017314 0.017545 0.01733
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 32 of 53
32 0.017658 0.017406 0.017559 0.017673 0.017255 0.017261 0.017644 0.017139 0.017166 0.017555
33 0.016954 0.017145 0.017252 0.017097 0.017528 0.017532 0.017712 0.017451 0.017473 0.017505
34 0.017697 0.017879 0.017703 0.017663 0.017262 0.017255 0.01757 0.017153 0.017258 0.01759
35 0.017048 0.017197 0.017323 0.017223 0.017693 0.017693 0.017713 0.017652 0.017544 0.017738
36 0.017803 0.017568 0.017716 0.017771 0.017366 0.017362 0.017779 0.017385 0.01719 0.017858
37 0.016976 0.017279 0.017524 0.017589 0.017542 0.017539 0.017868 0.017691 0.017797 0.017732
38 0.017882 0.017683 0.017939 0.01802 0.017564 0.017556 0.017941 0.017352 0.017496 0.017858
39 0.017075 0.017389 0.017921 0.017816 0.017734 0.017735 0.018014 0.017578 0.017653 0.017848
40 0.017845 0.017919 0.017906 0.018042 0.017565 0.017571 0.018154 0.017574 0.017657 0.017899
After Thermal
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.018739 0.018213 0.018407 0.018365 0.018167 0.018079 0.01834 0.018251 0.017954 0.018388
2 0.018009 0.018107 0.018175 0.018047 0.017742 0.018391 0.018571 0.018361 0.018313 0.018335
3 0.018506 0.018321 0.01822 0.018435 0.018122 0.018195 0.018425 0.018311 0.018014 0.018347
4 0.018063 0.017937 0.018082 0.017876 0.017827 0.018309 0.018246 0.018381 0.018264 0.018396
5 0.018433 0.018251 0.01813 0.018104 0.018116 0.017977 0.018216 0.017964 0.017942 0.018256
6 0.0178 0.017822 0.017888 0.0178 0.017856 0.018056 0.01823 0.018175 0.018275 0.01821
7 0.01821 0.017997 0.017925 0.018132 0.018112 0.017885 0.01815 0.017968 0.017788 0.018184
8 0.017668 0.017835 0.017932 0.017783 0.017914 0.018046 0.018084 0.018177 0.018036 0.018134
9 0.018256 0.017982 0.017946 0.018025 0.018045 0.01786 0.018079 0.017817 0.017871 0.018162
10 0.017571 0.017819 0.017873 0.017677 0.018023 0.018012 0.018091 0.018196 0.018003 0.018059
11 0.018134 0.01796 0.017977 0.01804 0.018237 0.017991 0.017971 0.017811 0.017848 0.018094
12 0.017624 0.017701 0.017976 0.017778 0.018065 0.017956 0.017942 0.017918 0.018023 0.01794
13 0.018273 0.018162 0.017965 0.018045 0.018379 0.017933 0.018103 0.017803 0.017814 0.018208
14 0.017598 0.017644 0.017965 0.017799 0.018112 0.01801 0.017941 0.018214 0.018113 0.018039
15 0.01834 0.01806 0.018055 0.018281 0.018331 0.018042 0.017945 0.017838 0.018013 0.018134
16 0.017667 0.017765 0.017988 0.017895 0.01829 0.018069 0.01825 0.018064 0.018229 0.018222
17 0.018365 0.018091 0.018201 0.018126 0.018484 0.018183 0.018131 0.017874 0.017846 0.018411
18 0.017649 0.017904 0.018048 0.018015 0.018392 0.01818 0.018348 0.018197 0.018161 0.018389
19 0.01845 0.018186 0.018238 0.018482 0.018663 0.018076 0.018425 0.017889 0.017975 0.018272
20 0.017919 0.018187 0.018549 0.018246 0.018708 0.01837 0.018284 0.01805 0.018376 0.018629
21 0.018205 0.017847 0.018391 0.018224 0.017983 0.018191 0.018411 0.018371 0.018316 0.018586
22 0.018551 0.018073 0.018318 0.018439 0.017946 0.018165 0.018693 0.018087 0.018083 0.018573
23 0.018079 0.017738 0.018304 0.018051 0.017991 0.018192 0.018477 0.01844 0.018297 0.018377
24 0.018421 0.018204 0.018294 0.018074 0.018036 0.018085 0.018429 0.018023 0.018014 0.018593
25 0.017748 0.017698 0.018144 0.017718 0.017988 0.01804 0.018257 0.01816 0.018093 0.018199
26 0.018231 0.01805 0.018114 0.018052 0.018112 0.017853 0.018236 0.01777 0.017915 0.018202
27 0.017614 0.017657 0.018067 0.017789 0.018021 0.017966 0.018236 0.01802 0.018046 0.018167
28 0.018236 0.017984 0.018035 0.018175 0.018076 0.017903 0.018256 0.017846 0.017907 0.018303
29 0.017623 0.017666 0.017945 0.017814 0.017999 0.017981 0.018083 0.017912 0.018059 0.018147
30 0.018155 0.018021 0.018144 0.018253 0.018152 0.017892 0.018226 0.017725 0.017907 0.018209
31 0.017565 0.017656 0.017978 0.017718 0.017936 0.018031 0.018133 0.017929 0.018126 0.017954
32 0.018262 0.017915 0.018114 0.018227 0.01803 0.017844 0.018258 0.017776 0.017747 0.018136
33 0.017611 0.017678 0.017871 0.017733 0.018031 0.01808 0.018241 0.01804 0.018041 0.018115
34 0.0183 0.018024 0.018249 0.018243 0.018069 0.017818 0.018169 0.017742 0.017853 0.018153
35 0.017672 0.017754 0.017855 0.017807 0.018075 0.018214 0.018245 0.018218 0.018096 0.018325
36 0.01834 0.018104 0.018264 0.018366 0.018113 0.017921 0.018356 0.017975 0.017742 0.018376
37 0.017595 0.017814 0.018073 0.018143 0.018126 0.018093 0.01838 0.01826 0.018306 0.018283
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 33 of 53
38 0.018412 0.018231 0.018436 0.018572 0.01836 0.0181 0.018491 0.017911 0.018037 0.018395
39 0.017741 0.017915 0.018386 0.018418 0.018491 0.018277 0.018518 0.018139 0.018201 0.018418
40 0.018439 0.018391 0.018424 0.018598 0.018108 0.018164 0.018684 0.018137 0.018184 0.018414
36 Position
Initial
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.017346 0.017429 0.01662 0.016539 0.01743 0.01755 0.016707 0.017453 0.017165 0.017678
2 0.016982 0.017176 0.016601 0.017632 0.016923 0.017406 0.017045 0.017235 0.017428 0.017399
3 0.017482 0.017287 0.016998 0.017536 0.017601 0.017662 0.016783 0.017493 0.017408 0.017928
4 0.017104 0.017351 0.017616 0.017648 0.01716 0.017431 0.018074 0.01721 0.017502 0.016484
5 0.017633 0.016501 0.017001 0.016935 0.017713 0.017832 0.017408 0.017604 0.017441 0.017775
6 0.017148 0.017459 0.017639 0.017829 0.017202 0.017614 0.017956 0.01727 0.017549 0.016763
7 0.017554 0.017998 0.017098 0.017364 0.017909 0.017745 0.017455 0.017638 0.017242 0.017724
8 0.017139 0.017619 0.017593 0.017825 0.017084 0.017602 0.017948 0.017504 0.01747 0.016356
9 0.017609 0.017878 0.016774 0.016785 0.017879 0.017819 0.017535 0.017549 0.01737 0.017821
10 0.017209 0.017434 0.017683 0.017785 0.017061 0.017633 0.017999 0.017514 0.017625 0.017409
11 0.017512 0.017884 0.017131 0.016949 0.017783 0.017717 0.017518 0.017869 0.017502 0.017828
12 0.017178 0.017457 0.017705 0.017919 0.017091 0.017816 0.018107 0.017607 0.017458 0.017542
13 0.017643 0.017981 0.01703 0.017379 0.017693 0.017913 0.017363 0.017247 0.017627 0.017871
14 0.017064 0.017447 0.017712 0.018036 0.017149 0.017526 0.018066 0.017483 0.017651 0.017208
15 0.017604 0.017825 0.017118 0.01663 0.017598 0.017825 0.017361 0.017911 0.017514 0.017857
16 0.017275 0.017437 0.017688 0.018038 0.017199 0.017754 0.01733 0.017426 0.017656 0.017351
17 0.017472 0.016796 0.017164 0.016385 0.017774 0.017846 0.017563 0.017098 0.017639 0.018015
18 0.017256 0.017419 0.016828 0.017973 0.017367 0.017719 0.017204 0.017501 0.017709 0.016794
19 0.01766 0.01798 0.017225 0.016548 0.017837 0.017813 0.017581 0.017514 0.017856 0.018103
20 0.017264 0.017617 0.01787 0.018104 0.017314 0.017741 0.017217 0.017354 0.01765 0.016707
21 0.017725 0.017237 0.017191 0.016832 0.01775 0.017837 0.017585 0.017255 0.017797 0.017958
22 0.01734 0.017622 0.017894 0.017976 0.017352 0.017712 0.018034 0.016937 0.017183 0.017465
23 0.017695 0.017284 0.017356 0.016743 0.017778 0.017762 0.017457 0.017139 0.017677 0.017972
24 0.017414 0.017534 0.01721 0.017267 0.01724 0.017642 0.017211 0.016915 0.017534 0.017686
25 0.017656 0.017183 0.017291 0.016669 0.017821 0.017854 0.016792 0.017162 0.017587 0.01804
26 0.017524 0.01768 0.01729 0.018062 0.017233 0.017696 0.017225 0.017542 0.017639 0.017491
27 0.017814 0.017064 0.017494 0.016159 0.017877 0.017964 0.017737 0.017001 0.017744 0.01785
28 0.017505 0.01746 0.017948 0.018099 0.017259 0.017638 0.018116 0.017483 0.017575 0.016654
29 0.017629 0.017107 0.016971 0.016497 0.017922 0.017992 0.017637 0.016985 0.017454 0.017803
30 0.017427 0.017348 0.017566 0.017893 0.0171 0.017598 0.018045 0.01746 0.016923 0.017272
31 0.017558 0.01707 0.016716 0.016607 0.017741 0.017692 0.01761 0.017897 0.017566 0.017933
32 0.017412 0.01741 0.016435 0.018009 0.01725 0.017529 0.017221 0.017466 0.017549 0.01715
33 0.01763 0.017929 0.016959 0.017631 0.017643 0.017787 0.017428 0.01789 0.017628 0.017833
34 0.017307 0.017354 0.017727 0.017889 0.01726 0.017574 0.018047 0.017515 0.017242 0.016941
35 0.017488 0.017962 0.016837 0.016601 0.017653 0.017747 0.017686 0.016793 0.017832 0.018035
36 0.017246 0.017089 0.017754 0.017917 0.016957 0.017533 0.017985 0.017334 0.017423 0.017163
37 0.016872 0.017617 0.017653 0.017186 0.017115 0.017323 0.017656 0.017064 0.017363 0.016891
38 0.016464 0.017765 0.01733 0.017139 0.01753 0.017656 0.017263 0.017521 0.017347 0.016523
39 0.017011 0.01755 0.017569 0.017063 0.017056 0.017465 0.017689 0.017261 0.017458 0.017071
40 0.016854 0.017571 0.017262 0.017349 0.017541 0.017725 0.01729 0.017507 0.0173 0.016895
41 0.016619 0.017329 0.017683 0.016891 0.017196 0.017618 0.017739 0.017482 0.017616 0.016921
42 0.017556 0.017676 0.017194 0.017456 0.017486 0.017672 0.017125 0.017647 0.01732 0.01795
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 34 of 53
43 0.017168 0.017252 0.017686 0.017286 0.017114 0.017526 0.017913 0.017348 0.017473 0.017047
44 0.017517 0.01784 0.017312 0.017449 0.017698 0.017736 0.017348 0.017605 0.017472 0.016597
45 0.017222 0.017593 0.017847 0.01702 0.017283 0.017483 0.017989 0.017492 0.017694 0.017039
46 0.017604 0.017748 0.017533 0.017515 0.017545 0.017761 0.017283 0.017759 0.017448 0.01683
47 0.016831 0.017429 0.017881 0.017173 0.017403 0.017482 0.018043 0.017092 0.017859 0.017127
48 0.017458 0.017622 0.017187 0.017412 0.017695 0.017596 0.0173 0.017768 0.017451 0.016643
49 0.017149 0.017234 0.017768 0.017331 0.017317 0.017459 0.017311 0.017576 0.017706 0.017005
50 0.017525 0.01797 0.016661 0.017615 0.017856 0.01759 0.017302 0.017886 0.017673 0.01722
51 0.017161 0.017085 0.017712 0.017105 0.017424 0.01758 0.017334 0.017444 0.017727 0.017118
52 0.017479 0.017708 0.017199 0.017577 0.017867 0.017591 0.01728 0.017828 0.017662 0.017139
53 0.017187 0.017453 0.017699 0.017069 0.017361 0.017369 0.017299 0.017346 0.01764 0.017183
54 0.017529 0.017648 0.017134 0.017648 0.017786 0.017536 0.017271 0.017776 0.01758 0.016843
55 0.017061 0.017434 0.017727 0.018002 0.017228 0.017508 0.017819 0.017458 0.017712 0.017114
56 0.01756 0.017833 0.016181 0.01747 0.017786 0.017455 0.017364 0.017888 0.017771 0.016916
57 0.017247 0.017411 0.01763 0.017897 0.01722 0.017572 0.01724 0.017436 0.017665 0.017006
58 0.017751 0.01787 0.017429 0.017331 0.017821 0.017618 0.01733 0.017765 0.017676 0.017262
59 0.01732 0.017924 0.017872 0.018053 0.017342 0.017405 0.017759 0.0175 0.017696 0.017021
60 0.01769 0.017651 0.017338 0.017595 0.017729 0.017465 0.017339 0.01785 0.017601 0.017115
61 0.017231 0.017583 0.01771 0.017383 0.01733 0.017459 0.017884 0.017584 0.017803 0.017222
62 0.017851 0.017878 0.017471 0.017707 0.017655 0.017713 0.017324 0.017871 0.017522 0.016923
63 0.017085 0.017847 0.017986 0.017586 0.017179 0.017661 0.01795 0.017287 0.017795 0.017068
64 0.017526 0.017641 0.017349 0.017459 0.017792 0.017545 0.017313 0.017857 0.017555 0.017163
65 0.01711 0.017383 0.017689 0.017105 0.017275 0.017335 0.01784 0.017482 0.017788 0.016937
66 0.017653 0.017686 0.01732 0.017262 0.017706 0.017527 0.017414 0.017883 0.017526 0.017148
67 0.017184 0.017147 0.017753 0.017536 0.017339 0.017274 0.017961 0.017381 0.017685 0.017033
68 0.017525 0.017472 0.017359 0.017357 0.017568 0.017597 0.017358 0.017851 0.017401 0.017072
69 0.017049 0.017364 0.01776 0.01722 0.017261 0.017396 0.017733 0.017568 0.017658 0.016982
70 0.017343 0.017633 0.017254 0.017475 0.017577 0.017626 0.01735 0.017865 0.017515 0.017305
71 0.016944 0.017289 0.017675 0.017536 0.017074 0.017451 0.017702 0.017241 0.01756 0.017035
72 0.017242 0.017696 0.017072 0.01727 0.017591 0.017503 0.017021 0.017964 0.017675 0.016213
After 100 cycles
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.01748 0.018162 0.01709 0.017334 0.017542 0.017327 0.017559 0.017249 0.017312 0.017863
2 0.017105 0.017352 0.017608 0.017699 0.017062 0.018093 0.01725 0.017526 0.018065 0.017252
3 0.017543 0.018024 0.017108 0.017363 0.017728 0.017296 0.017536 0.017499 0.017278 0.018046
4 0.017107 0.017398 0.017631 0.017688 0.017231 0.018089 0.017236 0.017604 0.018067 0.017494
5 0.017557 0.018083 0.01705 0.017537 0.017785 0.017344 0.017629 0.017522 0.017321 0.017937
6 0.017141 0.017463 0.017672 0.017861 0.017226 0.017966 0.017312 0.017632 0.017952 0.017536
7 0.017522 0.01793 0.017134 0.017393 0.017912 0.017538 0.017667 0.017316 0.017533 0.017773
8 0.017172 0.01758 0.017599 0.017851 0.017168 0.018077 0.017532 0.017596 0.018071 0.01748
9 0.017625 0.017862 0.017239 0.017407 0.017852 0.017487 0.017632 0.017439 0.017475 0.017929
10 0.017255 0.017538 0.01769 0.01781 0.017134 0.018098 0.017462 0.017685 0.018086 0.017376
11 0.01748 0.017923 0.017184 0.017567 0.017774 0.017525 0.0179 0.017545 0.017512 0.017882
12 0.017156 0.017543 0.017733 0.017958 0.017102 0.01809 0.017616 0.017499 0.018084 0.017374
13 0.01769 0.018037 0.017098 0.017448 0.01777 0.017438 0.017442 0.017674 0.017429 0.017923
14 0.017185 0.017547 0.017727 0.018099 0.017247 0.018171 0.017534 0.017745 0.018155 0.017449
15 0.017649 0.017966 0.017191 0.017571 0.017728 0.017439 0.017889 0.017582 0.017424 0.018016
16 0.017289 0.017546 0.017703 0.018102 0.017228 0.018339 0.017416 0.017808 0.01833 0.01741
17 0.017501 0.018107 0.017216 0.017548 0.017765 0.017633 0.017772 0.017675 0.01763 0.018173
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 35 of 53
18 0.017241 0.017512 0.017891 0.018093 0.017396 0.018182 0.018157 0.017764 0.018177 0.017218
19 0.017702 0.018049 0.017243 0.01759 0.017835 0.017653 0.017857 0.017913 0.017637 0.018286
20 0.017265 0.017691 0.01788 0.018157 0.017359 0.018209 0.018028 0.018308 0.018203 0.017428
21 0.017697 0.018202 0.017218 0.017491 0.017754 0.017591 0.018049 0.017853 0.017606 0.01801
22 0.017405 0.017633 0.01792 0.01809 0.017383 0.018148 0.018066 0.017545 0.018123 0.017481
23 0.01772 0.018166 0.017226 0.017654 0.017822 0.017541 0.018057 0.017788 0.017511 0.018076
24 0.017419 0.01749 0.017892 0.018103 0.017282 0.018333 0.018067 0.017865 0.018219 0.017518
25 0.017598 0.01815 0.017342 0.017614 0.017852 0.017751 0.017846 0.017672 0.017719 0.018096
26 0.017408 0.017656 0.01786 0.018119 0.017242 0.018251 0.017932 0.017878 0.018307 0.017526
27 0.017733 0.01802 0.017314 0.017491 0.017852 0.017756 0.01762 0.017751 0.017747 0.017868
28 0.017515 0.017558 0.017943 0.018108 0.01728 0.018186 0.017991 0.017789 0.018147 0.017552
29 0.01761 0.018099 0.017318 0.017636 0.017934 0.017684 0.017765 0.017527 0.017671 0.01802
30 0.017452 0.017428 0.017861 0.017946 0.017157 0.018112 0.017508 0.017793 0.01809 0.017363
31 0.01758 0.018023 0.017185 0.017705 0.01775 0.017682 0.017886 0.017631 0.017663 0.018152
32 0.017464 0.0174 0.017862 0.018071 0.01723 0.01824 0.017487 0.01775 0.018233 0.017412
33 0.017644 0.017864 0.017236 0.017572 0.017631 0.017512 0.018093 0.017669 0.0175 0.01799
34 0.017436 0.017389 0.017754 0.017985 0.01728 0.018131 0.017505 0.017329 0.018113 0.017474
35 0.017606 0.018014 0.017144 0.017523 0.017645 0.017727 0.01782 0.017894 0.017677 0.018087
36 0.017354 0.017122 0.017808 0.017664 0.016998 0.018037 0.017408 0.017749 0.018032 0.017251
37 0.0171 0.016928 0.01788 0.018147 0.017355 0.017919 0.017233 0.017478 0.017862 0.017104
38 0.01765 0.017912 0.017326 0.01732 0.017713 0.017483 0.017656 0.01747 0.017481 0.017626
39 0.017159 0.017702 0.01781 0.018115 0.017243 0.017864 0.017427 0.017599 0.017868 0.017264
40 0.017528 0.01773 0.017433 0.017519 0.017687 0.017535 0.01765 0.017527 0.017525 0.017786
41 0.017202 0.017478 0.017828 0.018008 0.017386 0.017933 0.017642 0.017776 0.017935 0.017137
42 0.017708 0.017634 0.01728 0.017612 0.017697 0.017393 0.017749 0.017495 0.017421 0.017745
43 0.017334 0.017593 0.017726 0.018156 0.017319 0.018144 0.017551 0.01764 0.018147 0.01726
44 0.017685 0.017916 0.017446 0.017736 0.017954 0.017625 0.017781 0.017699 0.01762 0.017959
45 0.017426 0.017865 0.018055 0.018197 0.017483 0.018166 0.017662 0.01788 0.018202 0.017308
46 0.0177 0.016972 0.017359 0.017763 0.017757 0.017561 0.017726 0.017706 0.017537 0.018068
47 0.017278 0.017506 0.017997 0.017123 0.017554 0.018241 0.017505 0.017858 0.018223 0.017382
48 0.017599 0.018086 0.017202 0.017586 0.01795 0.017564 0.017787 0.017658 0.01762 0.018108
49 0.017308 0.017366 0.017872 0.017592 0.017583 0.018125 0.0178 0.017886 0.018112 0.017295
50 0.017679 0.018016 0.017306 0.017835 0.018132 0.017587 0.018122 0.017851 0.017548 0.018171
51 0.017326 0.017783 0.017902 0.017143 0.017602 0.01762 0.017731 0.017882 0.018161 0.017422
52 0.017627 0.017792 0.017311 0.017821 0.018042 0.017498 0.017986 0.0179 0.017495 0.018079
53 0.017358 0.017626 0.017843 0.017181 0.017539 0.018137 0.017613 0.017879 0.018131 0.017441
54 0.017709 0.017997 0.017292 0.017787 0.018022 0.017536 0.01791 0.017696 0.017457 0.01805
55 0.01724 0.017293 0.017867 0.017349 0.017437 0.018064 0.017722 0.01701 0.018036 0.017346
56 0.017681 0.017948 0.017319 0.017842 0.017971 0.017587 0.018001 0.01794 0.017568 0.018078
57 0.01742 0.017564 0.017702 0.017733 0.017425 0.018014 0.017619 0.017977 0.017983 0.017313
58 0.017879 0.017958 0.017689 0.01773 0.018086 0.017663 0.017727 0.01793 0.017599 0.018024
59 0.017509 0.018029 0.01726 0.017969 0.017532 0.018047 0.017704 0.017902 0.018087 0.017324
60 0.017847 0.017491 0.01746 0.017878 0.017984 0.016855 0.018044 0.017684 0.017809 0.018203
61 0.017316 0.017752 0.017519 0.017472 0.017526 0.017377 0.017686 0.017855 0.017376 0.017461
62 0.017926 0.017945 0.017569 0.018044 0.017885 0.016336 0.018155 0.017692 0.017255 0.017876
63 0.017375 0.018035 0.018135 0.017515 0.017354 0.018073 0.017781 0.017946 0.018071 0.017319
64 0.017694 0.017628 0.017447 0.017799 0.01797 0.017615 0.017967 0.017789 0.017593 0.018007
65 0.017354 0.017611 0.017731 0.017216 0.017446 0.018156 0.017896 0.017891 0.018091 0.017293
66 0.017887 0.017881 0.017379 0.017623 0.017845 0.016604 0.017984 0.017705 0.017609 0.018044
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 36 of 53
67 0.017436 0.017602 0.017888 0.017678 0.017511 0.01823 0.017519 0.017073 0.018182 0.017351
68 0.017755 0.017323 0.017533 0.016727 0.01768 0.017604 0.01801 0.01757 0.017591 0.017914
69 0.017326 0.017557 0.017906 0.018419 0.017401 0.01801 0.017817 0.017831 0.018006 0.017294
70 0.017585 0.017704 0.017457 0.016839 0.017755 0.017591 0.018063 0.017702 0.017562 0.017931
71 0.017234 0.017536 0.01788 0.018388 0.017273 0.017979 0.017497 0.017786 0.017937 0.01738
72 0.017492 0.017895 0.017273 0.017669 0.017741 0.017303 0.018169 0.017802 0.017311 0.017684
After Thermal
Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10
1 0.017862 0.01821 0.018084 0.018237 0.018063 0.018407 0.017977 0.017718 0.017233 0.017936
2 0.017481 0.017668 0.018079 0.018065 0.018433 0.018175 0.017976 0.018227 0.017656 0.01803
3 0.017868 0.018256 0.018091 0.018379 0.0178 0.01822 0.017965 0.017733 0.017427 0.018031
4 0.017525 0.017571 0.017971 0.018112 0.01821 0.018082 0.017965 0.018243 0.01765 0.018069
5 0.017935 0.018134 0.017942 0.018331 0.017668 0.01813 0.018055 0.017807 0.017642 0.018075
6 0.017421 0.017624 0.018103 0.01829 0.018256 0.017888 0.017988 0.018366 0.017749 0.018113
7 0.018147 0.018273 0.017941 0.018484 0.017571 0.017925 0.018201 0.018143 0.017551 0.018126
8 0.01762 0.017598 0.017945 0.018392 0.018134 0.017932 0.018048 0.018572 0.017781 0.01836
9 0.018202 0.01834 0.01825 0.018663 0.017624 0.017946 0.018238 0.018418 0.017662 0.018491
10 0.017537 0.017667 0.018131 0.017908 0.018273 0.017873 0.018549 0.018598 0.017726 0.018108
11 0.018223 0.018365 0.018348 0.017983 0.017598 0.017977 0.018391 0.018167 0.017505 0.018079
12 0.01762 0.017649 0.018425 0.017946 0.01834 0.017976 0.018318 0.017742 0.017787 0.018391
13 0.018112 0.01845 0.018284 0.017991 0.017667 0.017965 0.018304 0.018122 0.0178 0.018195
14 0.017548 0.017919 0.018411 0.018036 0.018365 0.017965 0.018294 0.017827 0.018122 0.018309
15 0.018161 0.018205 0.018693 0.017988 0.017649 0.018055 0.018144 0.018116 0.017731 0.017977
16 0.017495 0.018551 0.018477 0.018112 0.01845 0.017988 0.018114 0.017856 0.017986 0.018056
17 0.018131 0.018079 0.018429 0.018021 0.017919 0.018201 0.018067 0.018112 0.017613 0.017885
18 0.017457 0.018421 0.018257 0.018076 0.018205 0.018048 0.018035 0.017914 0.01791 0.018046
19 0.018036 0.017748 0.018236 0.017999 0.018551 0.018238 0.017945 0.018045 0.017722 0.01786
20 0.017568 0.018231 0.018236 0.018152 0.018079 0.018549 0.018144 0.018023 0.018001 0.018012
21 0.017983 0.017614 0.018256 0.017936 0.018421 0.018391 0.017978 0.018237 0.017619 0.017991
22 0.017599 0.018236 0.018083 0.01803 0.017748 0.018318 0.018114 0.018065 0.017727 0.017956
23 0.018087 0.017623 0.018226 0.018031 0.018231 0.018304 0.017871 0.018379 0.017704 0.017933
24 0.017809 0.018155 0.018133 0.018069 0.017614 0.018294 0.018249 0.018112 0.018044 0.01801
25 0.017376 0.017565 0.018258 0.018075 0.018236 0.018144 0.017855 0.018331 0.017686 0.018042
26 0.017255 0.018262 0.018241 0.018113 0.017623 0.018114 0.018264 0.01829 0.018155 0.018069
27 0.018071 0.017611 0.018169 0.018126 0.018155 0.018067 0.018073 0.018484 0.017781 0.018183
28 0.017593 0.0183 0.018245 0.01836 0.017565 0.018035 0.018436 0.018392 0.017967 0.01818
29 0.018091 0.017672 0.018356 0.018491 0.018262 0.017945 0.018386 0.018663 0.017896 0.018076
30 0.017609 0.01834 0.01838 0.018108 0.017611 0.018144 0.018424 0.018708 0.017984 0.01837
31 0.018182 0.017595 0.018491 0.018079 0.0183 0.017978 0.018365 0.017983 0.017519 0.018191
32 0.017591 0.018412 0.018518 0.018391 0.017672 0.018114 0.018047 0.017946 0.01801 0.018165
33 0.018006 0.017741 0.018684 0.018195 0.01834 0.017871 0.018435 0.017991 0.017817 0.018192
34 0.017562 0.018439 0.018251 0.018309 0.017595 0.018249 0.017876 0.018036 0.018063 0.018085
35 0.017937 0.018213 0.018361 0.017977 0.018412 0.017855 0.018104 0.017988 0.017497 0.01804
36 0.017311 0.018107 0.018311 0.018056 0.017741 0.018264 0.0178 0.018112 0.018169 0.017853
37 0.017334 0.018321 0.018381 0.017885 0.018439 0.018073 0.018132 0.018021 0.017863 0.017966
38 0.017699 0.017937 0.017964 0.018046 0.018213 0.018436 0.017783 0.018076 0.017252 0.017903
39 0.017363 0.018251 0.018175 0.01786 0.018107 0.018386 0.018025 0.017999 0.018046 0.017352
40 0.017688 0.017822 0.017968 0.018012 0.018321 0.018424 0.017677 0.018152 0.017494 0.018024
41 0.017537 0.017997 0.018177 0.017991 0.017937 0.018365 0.01804 0.017936 0.017937 0.017398
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 37 of 53
42 0.017861 0.017835 0.017817 0.017956 0.018251 0.018047 0.017778 0.01803 0.017536 0.018083
43 0.017393 0.017982 0.018196 0.017933 0.017822 0.018435 0.018045 0.018031 0.017773 0.017463
44 0.017851 0.017819 0.017811 0.01801 0.017997 0.017876 0.017799 0.018069 0.01748 0.01793
45 0.017407 0.01796 0.017918 0.018042 0.017835 0.018104 0.018281 0.018075 0.017929 0.01758
46 0.01781 0.017701 0.017803 0.018069 0.017982 0.0178 0.017895 0.018113 0.017376 0.017862
47 0.017567 0.018162 0.018214 0.018183 0.017819 0.018132 0.018126 0.018126 0.017882 0.017538
48 0.017958 0.017644 0.017838 0.01818 0.01796 0.017783 0.018015 0.01836 0.017374 0.017923
49 0.017448 0.01806 0.018064 0.018076 0.017701 0.018025 0.018482 0.018491 0.017923 0.017543
50 0.018099 0.017765 0.017874 0.01837 0.018162 0.017677 0.018246 0.018108 0.017449 0.018037
51 0.017571 0.018091 0.018197 0.018191 0.017644 0.01804 0.018224 0.018079 0.018016 0.017547
52 0.018102 0.017904 0.017889 0.018165 0.01806 0.017778 0.018439 0.018391 0.01741 0.017966
53 0.017548 0.018186 0.01805 0.018192 0.017765 0.018045 0.018051 0.018195 0.018173 0.017546
54 0.018093 0.018187 0.018371 0.018085 0.018091 0.017799 0.018074 0.018309 0.017218 0.018107
55 0.01759 0.017847 0.018087 0.01804 0.017904 0.018281 0.017718 0.017977 0.018286 0.017512
56 0.018157 0.018073 0.01844 0.017853 0.018186 0.017895 0.018052 0.018056 0.017428 0.018049
57 0.017491 0.017738 0.018023 0.017966 0.018187 0.018126 0.017789 0.017885 0.01801 0.017691
58 0.01809 0.018204 0.01816 0.017903 0.017847 0.018015 0.018175 0.018046 0.017481 0.018202
59 0.017654 0.017698 0.01777 0.017981 0.018073 0.018482 0.017814 0.01786 0.018076 0.017633
60 0.018103 0.01805 0.01802 0.017892 0.017738 0.018246 0.018253 0.018012 0.017518 0.018166
61 0.017614 0.017657 0.017846 0.018031 0.018204 0.018224 0.017718 0.017991 0.018096 0.01749
62 0.018119 0.017984 0.017912 0.017844 0.017698 0.018439 0.018227 0.017956 0.017526 0.01815
63 0.017491 0.017666 0.017725 0.01808 0.01805 0.018051 0.017733 0.017933 0.017868 0.017656
64 0.018108 0.018021 0.017929 0.017818 0.017657 0.018074 0.018243 0.01801 0.017552 0.01802
65 0.017636 0.017656 0.017776 0.018214 0.017984 0.017718 0.017807 0.018042 0.01802 0.017558
66 0.017946 0.017915 0.01804 0.017921 0.017666 0.018052 0.018366 0.018069 0.017363 0.018099
67 0.017705 0.017678 0.017742 0.018093 0.018021 0.017789 0.018143 0.018183 0.018152 0.017428
68 0.018071 0.018024 0.018218 0.0181 0.017656 0.018175 0.018572 0.01818 0.017412 0.018023
69 0.017572 0.017754 0.017975 0.018277 0.017915 0.017814 0.018418 0.018076 0.01799 0.0174
70 0.017985 0.018104 0.01826 0.018164 0.017678 0.018253 0.018598 0.01837 0.017474 0.017864
71 0.017523 0.017814 0.017911 0.01834 0.018024 0.017718 0.018167 0.018191 0.018087 0.017389
72 0.017664 0.018231 0.018139 0.018571 0.017754 0.018227 0.017742 0.018165 0.017251 0.018014
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 38 of 53
DATA Continued
MATING/UNMATING:
2 Position
Sample# Initial After 25 Cycles After 50 Cycles After 75 Cycles
Mating Unmating Mating Unmating Mating Unmating Mating Unmating
1 0.84 0.86 0.79 0.72 0.72 0.68 0.70 0.63
2 0.81 0.72 0.78 0.64 0.75 0.62 0.72 0.59
3 0.80 0.66 0.72 0.61 0.70 0.59 0.68 0.55
4 0.89 0.66 0.80 0.58 0.74 0.55 0.70 0.55
5 0.81 0.68 0.76 0.62 0.73 0.54 0.68 0.50
6 0.81 0.63 0.75 0.59 0.72 0.55 0.69 0.54
7 0.82 0.45 0.73 0.44 0.71 0.43 0.67 0.43
8 0.82 0.76 0.74 0.71 0.71 0.64 0.69 0.59
9 0.95 0.70 0.83 0.65 0.76 0.62 0.70 0.60
10 0.87 0.65 0.80 0.60 0.73 0.58 0.71 0.57
Sample# After 100 Cycles After Thermals After Humidity
Mating Unmating Mating Unmating Mating Unmating
1 0.69 0.62 0.58 0.50 0.53 0.46
2 0.72 0.58 0.64 0.52 0.60 0.48
3 0.68 0.54 0.56 0.50 0.52 0.47
4 0.68 0.55 0.58 0.49 0.55 0.49
5 0.63 0.54 0.57 0.45 0.54 0.47
6 0.64 0.53 0.60 0.51 0.61 0.49
7 0.65 0.43 0.55 0.46 0.52 0.44
8 0.63 0.58 0.54 0.49 0.50 0.46
9 0.68 0.56 0.57 0.48 0.53 0.46
10 0.70 0.54 0.62 0.51 0.57 0.48
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 39 of 53
DATA Continued
20 Position
Sample# Initial After 25 Cycles After 50 Cycles After 75 Cycles
Mating Unmating Mating Unmating Mating Unmating Mating Unmating
1 8.27 7.92 8.27 6.61 8.15 6.51 8.02 6.43
2 7.89 6.91 7.32 6.10 7.23 6.02 7.19 5.99
3 8.02 6.77 7.92 6.90 7.62 6.83 7.50 6.47
4 9.61 8.31 9.39 6.49 9.13 6.52 9.02 6.52
5 9.02 8.31 8.69 6.86 8.49 6.73 8.40 6.67
6 7.52 7.26 7.03 7.02 7.12 6.81 6.98 6.52
7 7.90 7.46 7.76 6.48 7.46 6.18 7.38 6.09
8 9.28 6.60 9.20 6.51 9.07 6.44 8.91 6.45
9 7.89 7.06 7.37 6.47 7.29 6.32 7.25 6.32
10 7.44 7.13 6.67 6.12 6.54 6.07 6.41 5.99
Sample# After 100 Cycles After Thermals After Humidity
Mating Unmating Mating Unmating Mating Unmating
1 7.92 6.34 6.29 6.05 6.69 5.75
2 7.22 5.94 6.70 5.17 6.90 6.08
3 7.33 6.75 7.95 6.38 7.59 6.86
4 8.87 6.47 7.82 6.01 8.00 6.51
5 8.33 6.54 7.52 5.91 7.33 6.62
6 6.78 6.29 6.91 5.37 6.45 5.29
7 7.22 5.87 6.27 5.15 6.11 5.14
8 8.71 6.37 7.24 5.98 7.05 5.38
9 7.32 6.16 6.44 5.82 6.21 5.19
10 6.22 5.85 6.73 5.40 6.39 5.18
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 40 of 53
DATA Continued
36 Position
Sample# Initial After 25 Cycles After 50 Cycles After 75 Cycles
Mating Unmating Mating Unmating Mating Unmating Mating Unmating
1 18.11 14.09 17.83 13.13 17.52 12.20 17.28 11.92
2 16.85 13.16 15.76 12.40 15.32 11.46 15.04 11.21
3 15.39 13.35 15.03 13.62 14.79 12.31 14.63 12.14
4 16.32 14.51 15.81 12.79 15.64 11.88 15.11 11.36
5 16.44 14.48 16.18 13.18 15.52 12.08 15.27 11.91
6 17.07 12.87 15.21 12.16 15.13 11.84 14.82 11.56
7 16.50 14.12 16.34 13.07 16.09 12.14 15.59 11.84
8 20.83 13.86 19.41 12.54 18.11 11.38 17.58 11.55
9 18.64 12.79 17.76 11.73 16.42 10.90 15.69 10.58
10 15.45 13.50 15.16 12.73 15.09 11.28 14.73 11.05
Sample# After 100 Cycles After Thermals After Humidity
Mating Unmating Mating Unmating Mating Unmating
1 17.13 11.88 14.21 11.24 14.91 12.40
2 14.58 11.04 13.14 11.56 12.72 10.96
3 14.52 11.66 12.87 11.96 12.89 11.32
4 14.52 11.65 12.59 11.36 13.30 12.36
5 14.35 11.50 12.44 11.17 13.30 12.41
6 14.18 11.26 12.73 11.09 13.37 11.48
7 14.42 11.43 12.62 11.32 12.46 11.18
8 16.96 11.48 13.82 11.28 13.11 11.09
9 15.07 10.68 12.94 10.19 12.54 10.23
10 14.27 10.53 12.51 11.22 12.19 11.30
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 41 of 53
DATA Continued
NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING):
Initial Deflections in mm Forces in Grams
Sample
# 0.040 0.060 0.080 0.100 0.120 SET
1 43.00 64.00 88.00 109.00 130.00 0.01000
2 45.00 68.00 89.00 113.00 136.00 0.01000
3 48.00 68.00 91.00 114.00 136.00 0.00300
4 51.00 76.00 100.00 125.00 148.00 0.00500
5 49.00 71.00 94.00 116.00 136.00 0.00500
6 47.00 71.00 93.00 116.00 141.00 0.00300
7 48.00 69.00 93.00 116.00 139.00 0.01000
8 51.00 74.00 98.00 120.00 147.00 0.00700
9 48.00 72.00 94.00 115.00 140.00 0.00600
10 49.00 72.00 96.00 116.00 137.00 0.00300
11 55.00 79.00 101.00 122.00 143.00 0.00200
12 46.00 68.00 89.00 109.00 131.00 0.01000
13 54.00 76.00 98.00 120.00 143.00 0.00100
Thermal Deflections in mm Forces in Grams
Sample
# 0.040 0.060 0.080 0.100 0.120 SET
1 51.00 75.00 90.00 114.00 140.00 0.00000
2 52.00 76.00 100.00 117.00 143.00 0.00000
3 46.00 71.00 92.00 115.00 137.00 0.01000
4 48.00 69.00 92.00 111.00 137.00 0.00200
5 40.00 62.00 81.00 101.00 122.00 0.00200
6 53.00 78.00 102.00 125.00 145.00 0.00000
7 48.00 71.00 96.00 116.00 140.00 0.00300
8 43.00 65.00 85.00 106.00 129.00 0.00000
9 42.00 64.00 85.00 109.00 138.00 0.00600
10 52.00 75.00 95.00 116.00 136.00 0.00000
11 49.00 73.00 96.00 120.00 143.00 0.00500
12 46.00 71.00 92.00 116.00 139.00 0.00500
13 52.00 77.00 101.00 122.00 146.00 0.00000
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 42 of 53
DATA Continued
INSULATION RESISTANCE (IR):
Mated
x x x
Sample# SSM/TSM SSM TSM
1 10000 10000 10000
2 10000 10000 10000
Initial Insulation Resistance
Measured In Meg Ohms
Pin to Pin
Unmated
Mated
x x x
Sample# SSM/TSM SSM TSM
1 10000 10000 10000
2 10000 10000 10000
Measured In Meg Ohms
Thermal Insulation Resistance
Unmated
Pin to Pin
Mated
x x x
Sample# SSM/TSM SSM TSM
1 10000 10000 10000
2 10000 10000 10000
Measured In Meg Ohms
Humidity Insulation Resistance
Unmated
Pin to Pin
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 43 of 53
DATA Continued
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Mated
Sample# SSM/TSM SSM TSM
1 1680 1800 2000
2 1440 1770 2000
Initial Breakdown Voltage
Pin to Pin
Unmated
x
Test Voltage Until Breakdown Occurs
1080
Mated
Sample# SSM/TSM SSM TSM
1 1080 1080 1080
2 1080 1080 1080
Unmated
Test Voltage=
Pin to Pin
Initial DWV
1080
Mated
Sample# SSM/TSM SSM TSM
1 1080 1080 1080
2 1080 1080 1080
Thermal Test Voltage
Unmated
Test Voltage=
Pin to Pin
1080
Mated
Sample# SSM/TSM SSM TSM
1 1080 1080 1080
2 1080 1080 1080
Humidity Test Voltage
Unmated
Test Voltage=
Pin to Pin
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 44 of 53
DATA Continued
LLCR:
mOhm values Actual Delta Delta Delta
Board Position Initial 100 Cycles Thermal Humidity
1 P1 5.0 -0.1 0.3 1.4
1 P2 5.1 0.2 0.4 0.2
1 P3 5.0 -0.2 0.1 0.6
1 P4 5.3 -0.2 -0.2 -0.4
1 P5 4.4 -0.3 -0.1 -0.2
1 P6 4.7 -0.5 -0.4 0.5
1 P7 5.4 0.2 -0.2 -0.2
1 P8 5.3 -0.1 0.1 4.4
1 P9 5.2 0.0 0.7 1.6
1 P10 5.5 -0.4 -0.6 0.3
1 P11 5.0 0.2 0.8 1.9
1 P12 5.5 -0.7 -0.4 1.2
1 P13 5.0 0.3 0.3 5.7
1 P14 5.4 -0.3 0.2 2.4
1 P15 5.0 0.0 0.3 5.0
1 P16 5.1 0.0 0.0 3.2
1 P17 5.2 0.0 0.2 0.3
1 P18 5.4 0.0 -0.1 1.5
1 P19 5.1 0.1 0.0 0.3
1 P20 4.4 -0.2 -0.1 -0.1
1 P21 4.2 0.0 0.1 0.6
1 P22 5.7 0.2 0.1 0.1
1 P23 5.4 -0.2 -0.1 0.4
1 P24 5.6 -0.3 0.1 0.8
2 P1 5.0 0.1 0.6 0.4
2 P2 5.1 -0.2 0.6 2.6
2 P3 4.9 0.3 1.6 2.1
2 P4 5.3 -0.2 0.4 1.6
2 P5 4.3 -0.1 0.1 0.0
2 P6 4.3 0.1 0.1 0.1
2 P7 5.3 0.2 0.0 0.0
2 P8 5.3 -0.2 0.1 -0.1
2 P9 5.3 -0.2 0.6 0.2
2 P10 5.1 -0.1 0.2 0.3
2 P11 5.4 0.0 -0.1 0.4
2 P12 4.8 0.2 0.3 0.8
2 P13 5.2 0.1 0.3 0.8
2 P14 5.7 -0.3 0.8 1.9
2 P15 5.1 0.0 0.8 0.7
2 P16 5.1 0.1 0.3 0.1
2 P17 5.3 -0.1 0.4 0.0
2 P18 5.2 -0.2 0.2 0.7
2 P19 5.3 0.1 0.4 0.0
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 45 of 53
2 P20 4.3 0.2 0.3 0.8
2 P21 4.6 -0.4 1.1 2.7
2 P22 5.5 -0.2 0.7 4.9
2 P23 5.3 -0.1 0.3 1.0
2 P24 5.6 -0.5 -0.3 2.1
3 P1 5.3 0.1 0.1 0.1
3 P2 5.2 0.2 0.2 0.9
3 P3 5.1 0.4 0.5 0.3
3 P4 5.1 0.4 0.3 0.9
3 P5 4.1 0.3 0.2 0.2
3 P6 4.2 0.2 0.4 0.0
3 P7 5.6 -0.4 0.8 -0.2
3 P8 5.2 -0.2 0.0 -0.2
3 P9 5.4 0.2 0.5 -0.1
3 P10 5.1 -0.1 0.5 -0.2
3 P11 6.4 -0.8 -0.6 -0.6
3 P12 5.5 -0.2 -0.3 0.0
3 P13 5.6 -0.5 -0.4 -0.4
3 P14 5.4 -0.5 0.7 0.5
3 P15 5.7 -0.4 -0.3 -0.2
3 P16 5.6 -0.7 -0.3 -0.1
3 P17 5.4 0.0 0.0 0.0
3 P18 5.7 -0.5 -0.3 -0.2
3 P19 5.7 0.0 0.4 0.8
3 P20 4.3 -0.3 0.4 -0.2
3 P21 4.3 -0.2 0.1 -0.1
3 P22 5.7 0.1 0.0 0.1
3 P23 6.1 -0.5 -0.3 0.6
3 P24 5.8 -0.2 0.2 0.2
4 P1 6.0 0.1 1.3 1.2
4 P2 5.7 -0.8 -0.5 -0.6
4 P3 6.0 0.3 0.4 1.9
4 P4 5.7 0.8 0.8 0.6
4 P5 4.3 1.5 0.5 0.6
4 P6 4.2 0.2 -0.2 0.1
4 P7 5.4 0.3 0.2 0.7
4 P8 5.2 0.0 -0.2 -0.2
4 P9 6.3 -1.3 -1.3 -0.9
4 P10 5.2 0.2 0.2 0.1
4 P11 5.9 -0.5 -0.6 1.6
4 P12 5.1 -0.2 -0.1 -0.1
4 P13 5.7 -0.6 -0.6 -0.2
4 P14 5.2 -0.3 -0.4 -0.1
4 P15 5.7 -0.4 -0.8 0.0
4 P16 5.0 0.0 0.0 0.3
4 P17 5.3 -0.1 -0.3 0.2
4 P18 5.6 -0.5 -0.6 -0.4
4 P19 5.5 0.1 -0.3 0.1
4 P20 4.5 -0.3 -0.4 -0.5
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 46 of 53
4 P21 4.7 -0.4 -0.4 0.0
4 P22 6.3 -1.1 -1.2 -0.8
4 P23 6.0 -0.6 -0.7 -0.5
4 P24 6.6 -1.0 -1.1 -1.4
5 P1 5.5 -0.3 0.0 0.1
5 P2 5.2 0.1 0.1 0.1
5 P3 5.3 0.1 0.3 0.3
5 P4 5.2 0.1 0.3 0.0
5 P5 4.2 0.1 0.7 0.1
5 P6 4.4 0.1 -0.2 0.2
5 P7 5.5 0.0 0.0 -0.1
5 P8 5.3 0.0 0.0 -0.1
5 P9 5.3 -0.1 0.2 0.2
5 P10 5.1 0.1 0.0 0.1
5 P11 5.7 -0.3 0.6 1.0
5 P12 5.2 -0.3 0.3 -0.1
5 P13 5.3 0.0 0.2 0.3
5 P14 5.1 0.1 0.4 0.2
5 P15 5.3 -0.2 0.5 1.9
5 P16 5.2 -0.3 0.2 0.1
5 P17 5.3 -0.2 0.2 -0.2
5 P18 5.2 0.0 0.1 0.1
5 P19 5.5 -0.1 0.4 -0.3
5 P20 4.2 0.0 0.0 0.3
5 P21 4.5 0.5 0.7 0.1
5 P22 5.5 -0.1 0.2 0.4
5 P23 6.0 -0.1 -0.6 -0.2
5 P24 5.4 0.1 0.5 4.9
6 P1 5.4 -0.2 0.1 -0.2
6 P2 4.9 0.0 -0.1 0.0
6 P3 5.5 -0.5 -0.4 -0.2
6 P4 5.2 -0.3 0.4 0.8
6 P5 5.1 0.2 1.3 1.6
6 P6 4.6 -0.1 -0.1 0.2
6 P7 5.7 -0.5 -0.3 -0.3
6 P8 5.4 -0.4 -0.3 -0.3
6 P9 5.3 -0.2 0.0 0.4
6 P10 5.2 -0.2 0.2 0.7
6 P11 5.1 0.1 0.2 2.5
6 P12 5.2 -0.1 0.0 1.2
6 P13 5.4 -0.3 -0.1 1.6
6 P14 5.1 0.1 -0.1 0.6
6 P15 5.3 -0.1 0.2 1.1
6 P16 5.2 -0.3 0.0 -0.2
6 P17 5.3 -0.3 -0.1 -0.1
6 P18 5.1 0.0 -0.1 0.0
6 P19 5.5 -0.5 0.0 2.1
6 P20 4.1 0.2 0.2 0.5
6 P21 4.6 -0.2 -0.1 0.0
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 47 of 53
6 P22 5.6 -0.2 -0.3 -0.1
6 P23 5.3 0.1 0.1 0.3
6 P24 5.3 -0.1 0.1 0.1
7 P1 5.0 0.1 0.0 0.1
7 P2 5.2 -0.3 -0.1 -0.1
7 P3 5.0 0.2 0.0 0.4
7 P4 4.9 0.1 0.1 0.6
7 P5 4.1 0.0 0.0 0.0
7 P6 4.2 0.4 0.0 0.1
7 P7 5.3 0.0 0.2 -0.1
7 P8 5.4 -0.1 0.1 0.7
7 P9 5.4 -0.3 0.0 0.1
7 P10 5.2 -0.4 0.0 -0.3
7 P11 5.6 0.2 -0.3 -0.3
7 P12 5.4 -0.3 0.0 0.5
7 P13 5.5 -0.2 -0.3 -0.4
7 P14 5.5 -0.6 -0.4 -0.3
7 P15 5.4 0.3 -0.2 0.5
7 P16 5.3 0.0 0.0 0.3
7 P17 5.4 -0.1 0.0 0.0
7 P18 5.6 -0.2 -0.1 -0.3
7 P19 5.4 0.0 0.0 -0.1
7 P20 4.4 -0.1 0.0 0.0
7 P21 4.1 0.1 0.1 0.4
7 P22 5.5 0.0 0.1 0.0
7 P23 5.2 0.0 0.0 0.3
7 P24 5.4 -0.1 0.0 0.4
8 P1 5.5 0.5 0.4 0.8
8 P2 5.9 -0.1 -0.3 -0.3
8 P3 5.6 -0.5 -0.1 0.0
8 P4 5.2 -0.3 -0.1 0.1
8 P5 4.6 -0.4 -0.2 3.1
8 P6 4.3 -0.1 0.2 0.5
8 P7 5.5 0.1 0.0 0.0
8 P8 5.4 0.0 0.1 -0.1
8 P9 5.4 -0.1 0.0 0.4
8 P10 5.7 -0.5 -0.5 -0.2
8 P11 5.5 -0.4 -0.2 0.0
8 P12 5.5 -0.3 -0.2 2.3
8 P13 5.4 -0.1 0.2 0.6
8 P14 5.5 -0.1 -0.3 1.4
8 P15 5.4 -0.4 -0.1 3.0
8 P16 5.3 -0.1 0.2 0.3
8 P17 5.4 -0.3 0.1 -0.1
8 P18 5.3 0.0 0.2 0.4
8 P19 5.4 -0.1 0.0 -0.2
8 P20 4.4 -0.1 -0.2 0.7
8 P21 5.0 -0.7 -0.8 -0.5
8 P22 5.7 -0.4 -0.1 -0.3
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 48 of 53
8 P23 5.7 -0.3 -0.1 -0.5
8 P24 5.5 -0.4 -0.3 0.0
DATA Continued
GAS TIGHT:
mOhm values Actual Delta
Board Position Initial Gas Tight
1 P1 5.4 -0.2
1 P2 5.3 -0.1
1 P3 5.5 -0.5
1 P4 5.4 0.3
1 P5 4.8 -0.1
1 P6 4.5 -0.1
1 P7 5.1 0.1
1 P8 5.4 -0.4
1 P9 5.5 -0.2
1 P10 5.5 -0.3
1 P11 5.3 0.2
1 P12 5.4 0.0
1 P13 5.7 -0.3
1 P14 5.3 0.2
1 P15 5.4 0.0
1 P16 5.4 -0.1
1 P17 5.1 0.4
1 P18 5.4 0.2
1 P19 5.7 0.0
1 P20 4.6 0.0
1 P21 4.7 -0.5
1 P22 5.6 -0.1
1 P23 5.6 -0.3
1 P24 5.4 -0.1
2 P1 5.5 -0.2
2 P2 5.2 0.0
2 P3 5.1 -0.2
2 P4 5.4 -0.6
2 P5 4.3 -0.2
2 P6 4.3 0.0
2 P7 5.3 0.2
2 P8 5.3 0.0
2 P9 6.1 -0.9
2 P10 5.0 0.1
2 P11 5.4 0.1
2 P12 5.1 0.2
2 P13 5.8 -0.4
2 P14 5.4 -0.2
2 P15 5.6 0.0
2 P16 5.2 -0.1
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 49 of 53
2 P17 5.5 0.0
2 P18 5.7 -0.1
2 P19 5.6 0.0
2 P20 4.7 -0.4
2 P21 4.3 -0.6
2 P22 5.7 -0.1
2 P23 5.6 -0.2
2 P24 5.4 0.2
3 P1 5.3 0.0
3 P2 5.6 -0.2
3 P3 5.5 -0.3
3 P4 5.1 0.0
3 P5 4.4 0.0
3 P6 4.5 0.2
3 P7 5.2 0.1
3 P8 5.4 -0.1
3 P9 5.4 -0.3
3 P10 5.2 0.0
3 P11 5.5 0.0
3 P12 5.3 0.2
3 P13 5.3 0.0
3 P14 5.3 -0.3
3 P15 5.5 -0.2
3 P16 5.4 0.1
3 P17 5.0 0.0
3 P18 5.7 -0.1
3 P19 5.3 -0.3
3 P20 4.5 -0.1
3 P21 4.5 -0.2
3 P22 6.0 -0.5
3 P23 5.5 -0.2
3 P24 5.3 0.3
4 P1 5.3 -0.2
4 P2 5.3 -0.3
4 P3 5.1 -0.2
4 P4 5.2 -0.1
4 P5 4.1 0.2
4 P6 4.5 -0.2
4 P7 5.2 -0.1
4 P8 5.4 -0.1
4 P9 5.5 0.0
4 P10 5.3 0.1
4 P11 5.4 0.3
4 P12 5.6 -0.3
4 P13 5.2 0.1
4 P14 5.3 -0.2
4 P15 5.4 0.0
4 P16 5.2 0.2
4 P17 5.4 0.1
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 50 of 53
4 P18 5.8 -0.3
4 P19 5.4 -0.1
4 P20 4.5 -0.1
4 P21 4.2 -0.1
4 P22 5.4 -0.1
4 P23 5.5 0.0
4 P24 5.7 -0.1
5 P1 5.5 -0.3
5 P2 5.2 0.0
5 P3 5.3 -0.2
5 P4 5.8 -0.7
5 P5 4.2 -0.3
5 P6 4.8 -0.1
5 P7 5.2 0.0
5 P8 5.4 0.0
5 P9 5.2 -0.1
5 P10 5.4 -0.3
5 P11 5.4 0.2
5 P12 5.5 -0.1
5 P13 5.2 -0.2
5 P14 5.2 -0.1
5 P15 5.4 -0.1
5 P16 5.3 0.0
5 P17 5.1 -0.1
5 P18 5.5 -0.4
5 P19 5.3 -0.1
5 P20 4.4 0.2
5 P21 4.3 -0.1
5 P22 5.5 -0.1
5 P23 5.5 0.0
5 P24 5.4 -0.1
6 P1 5.4 0.1
6 P2 5.0 -0.3
6 P3 5.4 -0.3
6 P4 5.0 0.2
6 P5 4.2 0.0
6 P6 4.6 -0.4
6 P7 5.7 -0.1
6 P8 5.4 0.2
6 P9 5.2 -0.1
6 P10 5.1 -0.1
6 P11 5.6 -0.1
6 P12 5.1 0.1
6 P13 5.3 0.0
6 P14 5.4 0.0
6 P15 5.3 0.1
6 P16 5.3 -0.2
6 P17 5.5 -0.3
6 P18 5.0 0.2
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 51 of 53
6 P19 5.7 -0.1
6 P20 4.4 0.0
6 P21 4.4 -0.1
6 P22 5.5 0.1
6 P23 5.7 -0.2
6 P24 5.4 -0.3
7 P1 5.3 0.0
7 P2 5.2 -0.2
7 P3 5.4 0.1
7 P4 5.2 0.1
7 P5 4.3 -0.3
7 P6 4.6 -0.4
7 P7 5.2 -0.1
7 P8 5.2 0.0
7 P9 5.5 -0.1
7 P10 5.1 0.0
7 P11 5.7 -0.2
7 P12 5.2 0.0
7 P13 5.5 -0.4
7 P14 5.2 -0.3
7 P15 5.3 -0.1
7 P16 5.3 0.0
7 P17 5.8 -0.2
7 P18 5.5 -0.3
7 P19 5.9 -0.3
7 P20 4.5 0.0
7 P21 4.3 0.0
7 P22 5.6 -0.2
7 P23 5.4 0.1
7 P24 5.6 -0.2
8 P1 5.3 0.0
8 P2 5.1 0.0
8 P3 5.0 -0.2
8 P4 4.9 0.2
8 P5 4.2 0.1
8 P6 4.7 -0.2
8 P7 5.6 -0.4
8 P8 5.3 -0.2
8 P9 5.3 -0.1
8 P10 5.3 -0.3
8 P11 5.9 -0.4
8 P12 5.9 -0.4
8 P13 5.9 -0.1
8 P14 5.5 -0.1
8 P15 5.7 -0.1
8 P16 5.8 -0.4
8 P17 5.7 -0.5
8 P18 5.5 -0.2
8 P19 5.7 -0.2
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 52 of 53
8 P20 4.3 -0.1
8 P21 4.5 0.1
8 P22 5.7 -0.3
8 P23 5.4 0.1
8 P24 5.6 -0.4
Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV
Part description: TSM/SSM
Page 53 of 53
EQUIPMENT AND CALIBRATION SCHEDULES
Equipment #: HZ-MO-03
Description: Micro-ohmmeter
Manufacturer: Keithley
Model: 580
Serial #: 297288
Accuracy: Last Cal: 2009-8-07, Next Cal: 2010-8-06
Equipment #: HZ-TCT-01
Description: Normal force analyzer
Manufacturer: Mecmesin Multitester
Model: Mecmesin Multitester 2.5-i
Serial #: 08-1049-04
Accuracy: Last Cal: 2009-4-29, Next Cal: 2010-4-28
Equipment #: HZ-OV-01
Description: Oven
Manufacturer: Huida
Model: CS101-1E
Serial #: CS101-1E-B
Accuracy: Last Cal: 2009-12-15, Next Cal: 2010-12-14
Equipment #: HZ-THC-01
Description: Humidity transmitter
Manufacturer: Thermtron
Model: HMM30C
Serial #: D0240037
Accuracy: Last Cal: 2009-3-4, Next Cal: 2010-3-3
Equipment #: HZ-MO-01
Description: Micro-ohmmeter
Manufacturer: Keithley
Model: 2700
Serial #: 1199807
Accuracy: Last Cal: 2009-4-29, Next Cal: 2010-4-28
Equipment #: HZ-PS-01
Description: Power Supply
Manufacturer: Agilent
Model: 6031A
Serial #: MY41000982
Accuracy: Last Cal: 2009-4-29, Next Cal: 2010-4-28