designer rangecms.esi.info/media/documents/leade_designer_ml.pdf · the technical guide...
TRANSCRIPT
Cl/SfB (31.5)
Uniclass L411 + L3814 August 2009
CUSTOM-MADE DOORS, DOORSETS AND SCREENS
DesignerRange
De
sign
er R
an
ge
ContentsAn introduction P. 03Discover the Leaderflush Shapland difference P. 04-05The Designer concept P. 06 Performance doorsets P. 07Veneer options and methods P. 08-11Bespoke veneer options P. 12-13Other finishes P. 14-15Configurations and handings P. 16-23Sentinel P. 24-27Pivette doorsets P. 28-31Ironmongery solutions P. 32Doorsets on-site P. 33 Introducing our other ranges and brands P. 34-35
contents
P. 02
Designer Range
De
sign
er R
an
ge
9001 14001 180019001 14001 180019001 14001 18001
ad
v an c
i ng a
r c h i t e c t u r a l i r o n mo n g
e r y
g a i m e m b e r
P. 03
with the demands of the building industry continuing to grow, it’s good to know that there is one company that is perfectly placed to meet them
an introduction
custom-made doors, doorsets and screens
As part of SIG plc, a successful £3 billion company, Leaderflush Shapland’s financial strength and stability continues to grow whilst retaining its individual identity and position as the UK’s largest performance door and doorset manufacturer.
Leaderflush Shapland combines long experience and a tradition of craftsmanship with the most efficient production techniques to ensure that even the largest, fast-track projects can be handled effectively.
Substantial investment into manufacturing technology, product development and customer relationship programmes ensure that all our customers receive the highest possible levels of service and product from manufacture through to installation.
The Designer Range of flush doors, doorsets and screens has always been at the heart of Leaderflush Shapland. Designer Range doorsets combine performance and innovative design for a diverse range of buildings including airports, hospitals, offices, sports centres, schools and cinemas.
This brochure demonstrates what the Designer Range can offer but the real inspiration for your project will come from you, the designer, working with Leaderflush Shapland to achieve your aims.
Other information sources
Specification details for the Designer Range are available in the technical guide ‘Specifying with Doors and Doorsets’.
Our website provides guidance on the specification of doorsets in relation to Building Regulations and other official documentation. Leaderflush Shapland can also provide guidance on specific applications including healthcare and education.
Visit www.leaderflushshapland.co.uk for further details or contact us directly on 01773 530500.
our philosophy today at Leaderflush Shapland is customer focused and service led in everything we do
discover the Leaderflush Shapland difference
performance is at the core of every Leaderflush Shapland door
P. 04
De
sign
er R
an
ge
Support
Expert technical support and a full NBS-based specification facility are available, supported by a team of Specification Managers and our project management service provides a single point of contact at all stages. As members of the RIBA CPD Providers’ Network, we offer specifiers an independently assessed CPD seminar service with attendance certificates.
Installation Partners
Leaderflush Shapland has formed strategic relationships with numerous joinery subcontractors across the UK to offer an Installation Partners scheme for doorsets. Each Installation Partner recommended by Leaderflush Shapland is fully conversant in the latest installation techniques to ensure a continued chain of quality from manufacture to installation. A list of these Installation Partners can be found on our website www.leaderflushshapland.co.uk/installationlist.php.
Sustainability
We have developed an Environmental Management System in accordance with BS EN ISO 14001:2004, based on a
company Environmental Policy. Leaderflush Shapland is essentially a timber based manufacturing company and was the first company in its industry to develop and implement tracking systems independently assessed by the ‘FSC Trada Trak’ accreditation scheme. As a result, doors and doorsets can be specified using solid timber and timber-based raw materials exclusively from well-managed and sustainable sources, independently certified by the Forest Stewardship Council.
Diversity
In addition to the Designer Range, Leaderflush Shapland offers the Plasform® Range of postformed doors and doorsets, and the Extended Performance Range with enhanced characteristics covering acoustics, extended fire resistance, radiation shielding and security.
Certification
All our doors and doorsets are fully certified to recognised performance standards. The company is accredited to BS EN ISO 9001: 2008. All fire resisting products are manufactured under the intensive BWF-CERTIFIRE
P. 05
independent product conformity scheme. Every fire door or doorset carries a tamper evident and fully traceable label with clear essential information.
Innovation
Continuing product development and an exhaustive performance testing programme enable us to offer a wide scope of certified doorsets. In addition to regular performance testing by UKAS accredited independent bodies our in-house test facility allows continuous product development and quality assurance checks. Our test facilities include a furnace for full size doorsets, cyclic testing rigs, as well as equipment for assessing mechanical properties and security performance. But this innovative approach is also applied to customer service and procurement initiatives to meet the challenges of today’s construction industry.
Architectural Hardware
Leaderflush Shapland offers a full range of architectural hardware creating the complete end-to-end solution for a total doorset package. Our offer is available in two distinct ranges – Origins and Elements – providing architects and
specifiers with products that are suitable for any application. An experienced team is on-hand to provide a full specification support service and have been accredited by the Guild of Architectural Ironmongers.
the Designer concept
custom-made doors, doorsets and screens
P. 06
Introducing Designer
The core product offer from Leaderflush Shapland is the Designer Range, giving specifiers complete freedom in flush doors and doorsets with numerous wood veneer, PVC, paint and metal finishes. The most popular options are included with 4 frame types and 11 vision panel designs – all of which have already been fire-tested and certified.
The Designer Range also gives the specifier opportunities to produce unique designs that meet specific performance requirements. This is achieved by the partnerships which we forge with specifiers to ensure that design visions are carried through to practical long-term solutions.
All Designer Range doors, doorsets and screens are made to order and there are no prescribed opening dimensions. As an intrinsic part of our service to you, door constructions and thicknesses, together with detailed design and doorset component selection, are automatically generated to meet your performance requirements and design concepts. To maintain consistently high quality standards, our doors and doorsets should be supplied fully decorated and factory
glazed wherever possible, although on-site finishing by others can be accommodated. We also advocate specification of complete doorsets – factory assembled under strict quality control regimes and fully certificated to ensure consistent performance on-site.
Why choose Designer
The Designer Range brings you complete design freedom in flush doorsets, while we focus on meeting performance demands and realising your design vision. This is achieved by working in partnership so that you benefit from our unrivalled expertise, service and product quality.
The Designer Range suits virtually any application and the only limit to what we can achieve together is your imagination. With every commercial wood veneer option available, as well as PVC, paint and metal finishes, the choice is massive. Add distinctive vision panels and ironmongery to create your own style of flush doorset, in the knowledge that fire, smoke, acoustic, durability and other performance requirements are being met.
complete freedom in flush door and doorset design
De
sign
er R
an
ge
P. 07
BWF-CERTIFIRE scheme
BWF-CERTIFIRE audits are undertaken on a regular basis by CERTIFIRE’s Independent Auditors for the manufacture of doors and doorsets. Only BWF-CERTIFIRE approved ironmongery, glazing and seals are used, and every fire door or doorset carries a tamper-evident and fully traceable BWF-CERTIFIRE label of authenticity.
performance doorsets
third party accredited doorsets
the Designer Range offers a selection of independently tested fire resistant doorsets suitable for all sectors
veneer options
creative freedom realised with our expertise in veneers
P. 08
Within the Designer Range the specifier has complete freedom to choose any wood veneer that is commercially available. We can help specifiers with selection and provide samples of veneers and products which are useful during the project planning stage.
The way in which individual sheets of veneers are cut and assembled will substantially affect the appearance of the end product. For ideas on colours and veneer design visit our online veneer selector at: www.leaderflushshapland.co.uk/veneer_selector.php.
Cutting methods
Quarter cut
The log is cut along its length to form four separate ‘quarter logs’. These are then sliced at 90 degrees to the growth rings to provide the sheets which give a striped appearance when assembled.
Crown cut
The log is simply sliced along its length, resulting in a figured appearance.
Rotary cut
The log is simply peeled to give a continuous veneer, generally used for constructional plywood. Veneer sheets cannot be matched except for general colour characteristics and their appearance is wild and flowery.
there are many timber species suitable for the production of decorative wood veneers
De
sign
er R
an
ge
P. 09
The most popular patterns are shown here but the designer has unlimited scope, as illustrated on pages 12-13. Lay-on patterns can be repeated over pairs of doors, overpanels and side panels. We can advise on the best method of achieving particular visual effects.
Book matched
Two adjacent sheets, as cut from the flitch, are placed next to each other and one is turned over to create a mirror image. This can be repeated over the door and used to create a central focus.
Consecutively laid (slip matched)
The lay-on is assembled across the face of the door using adjacent sheets as cut from the flitch. Sheets are consecutively laid next to each other in the same order and with the same face outward resulting in a planked effect.
Centre jointed
Equal numbers of sheets are used working outwards from the
centre line of the door in width. Sheets are selected so that the left half of the door matches the right half, resulting in a mirror image. Alternatively adjacent sheets can be consecutively laid.
Centred feature
An unequal number of sheets is used and the central veneer is usually selected for its striking appearance. To emphasise its focal position the remaining sheets can be laid so that those on the left half mirror those on the right half. Alternatively adjacent sheets can be consecutively laid.
Quartered
The veneers are laid reversed about two axes so that a mirror image is created in both width and height. Sheets can be cut and arranged to give a centred feature.
All veneered doors have hardwood lippings to both vertical edges, softened with a 3mm radius, or alternatively to all 4 edges. These can either be exposed or concealed as required. Lippings are selected to colour match or contrast either the veneer or frame.
veneer methods
popular lay-ons
once the sheets of veneer have been cut they are assembled to produce lay-ons
simplistic veneer
P. 10
Veneer finish and protection
To enhance and protect veneered doors and doorsets, we recommend that they are fully finished with either Hyalux Natural or Hyalux Tint. Hyalux Natural is a clear polishing system which gives a durable, lustrous, satin finish emphasising the veneer grain, while Hyalux Tint offers the specifier a choice of translucent colours (British Standards or RAL) applied to the veneer. Alternative finishes can also be provided.
Hygienilac® – antimicrobial protection
Hygienilac® is a biocidally proactive additive, integral to both Hyalux Natural and the Hyalux Tint, that provides protection against harmful bacteria such as C.diff, MRSA and Salmonella. Hygienilac® works by preventing the bacteria’s access to nutrients so that they starve and die. It does not employ silver technology, rendering it completely UV stable and remains effective for years because of its inherently low water solubility.
Features:
• 99.9 percent kill rate over a 24 hour period
• non-carcinogenic
• non-mutagenic
• non skin sensitising
• UV stable
• Independently tested and verified
veneer optionsdesigns to highlight the simplicity and beauty of wood
De
sign
er R
an
ge
P. 11
Top left: Romford Hospital – American White Oak
Top right: Bishop Ramsey School – American Black Walnut
Bottom left: Joseph Chamberlain Sixth Form College – Maple
Bottom right: Arora Hotel, Gatwick – Cherry
Popular veneer designs
Examples of the more popular, straightforward veneered door styles using a single timber species are shown on these pages, highlighting the beauty of wood without complex design statements. Here, it is the character of the timber itself that determines the particular appearance of the door.
bespoke veneer options
complete design freedom in veneered doors
P. 12
inspirational veneer lay-ons can be created to complement the surrounding environment
At Leaderflush Shapland we are focused on inspiring you. The Designer Range allows you to take design to the limit. Using individual pieces of veneer we are able to manufacture doorsets that will enhance and complement the overall architectural environment of your project.
Our experience and skill will bring your ideas to fruition. Whether it be an office, performing arts building, hospital or school, we will work with you to deliver your requirements.
Our veneers can be found in some of the most prestigious buildings across Great Britain, from the Millennium Centre, National Welsh Assembly or the Millennium Madejski Hotel, to the corridors of large-scale projects, such as Birmingham Super Hospital and Manchester Joint Hospitals.
The combination of product, design and performance ensures we are able to meet all your specification requirements. Our dedicated Technical Services team will support you from design through to specification.
De
sign
er R
an
ge
P. 13
Top left: Morley Hayes – American Black Walnut with Ebony inlay
Top right: Commercial Office, Barnstaple – Chequered veneers, horizontally and vertically laid, including contrasting inlay
Bottom left: A selection of bespoke veneer lay-ons
Bottom centre: Millennium Centre, Wales – multiple veneer species, random widths creating horizontal planked effect
Bottom right: Arora Hotel, Manchester – Maple veneer with American Black Walnut inlay
Bespoke designs with veneers
Complete creative freedom can also be accommodated, working in partnership with Leaderflush Shapland veneer experts to realise more adventurous designs. Various techniques can be used including contrasting inlays where
veneers from different timbers or combinations of tinted and natural veneers are laid on the same door face. A variety of effects can be created ranging from subtle differences to the most striking design statement. Just a few examples are shown on these pages.
other finishes
an unrivalled selection of door facing materials
P. 14
Introduction
Helping designers realise their design visions, Leaderflush Shapland offers a wide range of finishes suitable for any environment or application.
Laminate and PVC facings
Decorative laminates and other PVC facings are available from the Designer Range to give increased impact resistance. Laminate finishes have a surface colour and slightly textured finish, PVC has a through colour and smooth finish, or fully textured for high impact resistance. The specifier has complete freedom of choice from facing manufacturers’ ranges. Postformed laminate, Hygieniform PVC and PVC faced doors are fully illustrated within our Plasform® brochure.
Metal facings
Sheet metal can be bonded to the door construction during the manufacturing process. The facing options include mild, patterned and brushed stainless, or galvanised steel. Patterned steel facings can also be applied in the form of trays to fully encapsulate the door. Steel facings can be left clean, primed, powder coated or stove enamelled, with the
exception of patterned stainless steel which is self-finished. Steel frames can be supplied finished to complement door facings.
With the exception of doors fitted with trays, all doors have exposed hardwood lippings to both vertical edges softened with a 3mm radius, or to all 4 edges if required with square edged top and bottom.
Paint finishes
Designer Range doorsets can be finished with Velvalux Opaque, a factory applied pigmented polyurethane paint available in any colour within RAL or British Standard ranges, for which colour matched PVC pellets are supplied to conceal frame fixings. We can provide samples for selection and production control purposes, or the specifier can supply material for colour matching.
Hygieniform PVC – antimicrobial PVC
Leaderflush Shapland have introduced an innovative and exclusive high impact PVC facing – Hygieniform. As part of the Designer range of products, Hygieniform incorporates the Hygienilac® antimicrobial additive within the matrix of
freedom of choice is fundamental to the Designer Range and the widest possible variety of materials, colours and finishes are offered
De
sign
er R
an
ge
P. 15
the PVC providing complete protection throughout the 2mm thickness. Hygieniform protects against harmful bacteria such as C.diff, MRSA, Salmonella and E.coli. Colour choices within the range are shown in the table above.
Envision (patent pending) Application number 0907913.8
The exclusive translucent facing option – Envision, enables the intricate detail of high definition, photographic images
to be incorporated into a factory assembled doorset and is available for use on any doorset within the Leaderflush Shapland product ranges. Any image or design is digitally reverse printed and encapsulated behind 2mm of material, providing image protection against wear.
For more information please contact us on 01773 530500 or visit www.leaderflushshapland.co.uk
Please note: Due to limitations in the print process, certain products may differ slightly in colour from those illustrated above.
Hygieniform PVC colour guide
Oceana Sky Neptune Emerald Bottle Green
Manta Grey Mist Stone
Ivory Musk Shiraz
Sandy
Daisy
Shadow
Description
P. 16
Design considerations
In order to facilitate this process we manufacture all doorsets to individual orders, allowing differences in size, configuration and construction to be accommodated.
As size, configuration, door construction and performance are all interrelated, we are keen to discuss specific requirements at the earliest stages of a project. As a guide, individual doors with a maximum width of 1300mm or a maximum height of 3000mm can be provided. Where doors only are required for refurbishment and upgrade projects, oversize lippings can be included to allow for on-site adjustment.
Doors and doorsets can be produced in single or paired configurations and in either single or double action modes.
For unique solutions to meet the disabled access requirements of the Building Regulations Part M, refer to the Pivette doorset on page 28. Overpanels or glazed fanlights can be incorporated within doorset configurations. Where required, lippings are selected and finished to match or contrast the door and can either be exposed or concealed.
configurations and handings
considerations when specifying doorsets
the Designer Range is intended to be as flexible as possible in meeting the specifier’s visual and performance requirements
De
sign
er R
an
ge
P. 17
Configurations and handings
The drawings below set out the terminology for typical doorset configurations and handings for use in specifications. Configuration, size, construction and performance characteristics are all interrelated. Specific size ranges for particular products can be found in individual product BWF-CERTIFIRE data sheets. For information on side lights and side panels contact Technical Services.
Single action L/H door swing
Single action R/H door swing
Single action L/H leading
Single action R/H leading
single leaf
With overpanel
With fanlight
equal pairs
With overpanel
With fanlight
With overpanel
With fanlight
unequal pairs
vision panels
P. 18
Vision panels – suitable for non-rated, FD30 and FD60
The most popular vision panel styles are shown below, although other designs can be accommodated. All aperture dimensions shown are cut-out sizes. A selection of glazing systems are available to suit styles as shown. Please refer to the Leaderflush Shapland Extended Performance Range for vision panels suitable for FD90 and FD120.
Aperture VN1 Aperture VN2
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
Aperture VN3
Aperture VN4 Aperture VN5
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
Aperture VC
Aperture VB Aperture VW1
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
Aperture VF
Aperture VM1 Aperture VM2
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
750 x 200 750 x 200688 x 200
156
VN1
750 x 200 1450 x 200488 x 200
VN2
VN3 VN4
1650 x 200
VN5
900 x 250
HTM1
900 x 250500 x 250
HTM2
VF1/2
200 x 200
VM1
200 x 200
VM2
M
M
M
M
8300 8300
156 156
156 150 150
156
212
1106
212
406
206
1106
75 75
212
419
406
200
200
900
206
156 156
300 dia (VC1)400 dia (VC2)500 dia (VC3)
VC1/2/3
300 x 300 (VB1)400 x 400 (VB2)
VB1/2
600 x 300
VW1
750 x 400 (VF1)750 x 500 (VF2)
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
1600
1106
1600
1200
– cut-out dimension
Key - for disabled access requirements
M - compliance with Part M of the Building Regulations
8300 - compliance with BS8300
De
sign
er R
an
ge
P. 19
Vision panels
One of the key features of the Designer Range is the ability to integrate unusual vision panels. Whilst typical configurations are illustrated to the left, specifiers can also have the freedom to design doors that are individual.
Typical configurations
Within the Designer Range there are 11 commonly used vision panel configurations as illustrated opposite. As glazing has a major impact on fire performance, appropriate glazing and beading configurations need to be accounted for depending on the performance requirements. The configurations below provide up to 60 minutes fire resistance for hardwood bolection bead, hardwood flush bead and steel trim options.
The glass retention systems available include hardwood bolection and flush beads, or alternatively steel trims, all as detailed. For specialised glazing systems, for example with glazing and facing flush in appearance used in hygienic or similar areas, refer to the Plasform® Range.
Hardwood bolection bead
Hardwood flush bead
Steel trim
OFF ON
Interlayer Film
Glass Glass ConductiveCoating
Liquid Crystal Layer
Liquid Crystal Film
+ – + –
To ensure quality and specified performance, all doors must be factory glazed. Hardwood beads can either be fully polished or painted to match the door or doorset. These are generally fixed with steel pins, punched in and filled, although other fixing methods are available. Steel trim alternatives allow the designer to match vision panels with door furniture, protective plates or other accessories and are screw fixed into position. Glazing for vision panels in fire rated doors can either be wired or unwired, insulated or uninsulated and clear or obscured glass.
Non-typical configurations
For other shapes, sizes, positions and details of vision panels, the constraints set out in the ‘Specifying with Doors and Doorsets’ technical guide should be considered or discussions held with us at an early design stage.
Intelliglass®
Intelliglass® obscurable vision panels provide the ideal solution where privacy may be required, for example in environments such as hospitals, consulting rooms, banks, therapy rooms, commercial offices and schools.
Intelliglass® vision panels utilise liquid crystals which are sandwiched between two layers of transparent conductive film to make LC Privacy Film. The film is then laminated between two pieces of glass. When electricity is applied to the film the liquid crystals line up and the vision panel is clear. When the power is turned off, the liquid crystals return to their normal positions and turn the glass from clear to obscured.
The panels can be changed from clear to frosted at the flick of a switch. This intelligent glazing system can be automatically or remotely controlled by connection to a PC or by wireless connection or simply a switch adjacent to the doorset. As there are no protrusions to cause dust or dirt build-up, they are ideal for locations where hygiene is of prime importance.
The high-tech Intelliglass® vision panel solution obviates the need for cumbersome mechanical systems, blinds, shutters or curtains.
Intelliglass® is available in two standard sizes: 400mm x 400mm and 800mm x 250mm. For non-standard sizes please contact our Technical Services Department on: 01773 530500 or email: [email protected].
Louvres and grilles
For ventilation, air transfer grilles or louvres can be fitted into Designer Range doors and doorsets.
P. 20
Frames
The Designer Range offers a choice of four recognised frame designs, although we are able to manufacture other frame sections if preferred. A minimum lining thickness of 32mm is required, however, in some situations certain ironmongery products require a thicker frame.
All frame designs are available to suit common standard partition widths of 94, 100, 113, 126 and 144mm, however other widths can be accommodated. Solo frames can be manufactured to suit specific size requirements while the two part Cubith design has in-built flexibility. Mono and Barum frames can be adapted to non-standard partition thicknesses using an 18mm thick extension lining at a minimum of 44mm wide. Where extension linings cannot be used, a one piece Mono or Barum frame will be manufactured to suit. For double action situations the Barum frame without the stop should be used.
Three of the designs – Mono, Cubith and Barum – can be manufactured from hardwood, softwood or MDF with all feature edges softened to a 3mm radius. All three are available with the clear Hyalux Natural polishing system or Hyalux Tint translucent colour finish. Both Hyalux Natural and Hyalux Tint will contain the Hygienilac® antimicrobial additive.
To protect the factory finish and conceal on-site fixings, frames, linings, stops and architraves can be counter bored and supplied with matching pellets. Additional options for stops and architraves include the Leaderflush Shapland secret-fix detail or pinning and filling on-site by others.
The steel frame design – Solo – has a rebated section made to suit the partition thicknesses specified. The face can be left clean, primed or powder coated. Solo frames can also be manufactured in stainless steel with a brushed finish. Pre-prepared holes are incorporated for on-site fixing, concealed by flush, steel cover discs to match the chosen finish. The Split Solo is also available to cater for varying partition thicknesses.
frames and screens
Cubith frame design(split)
Mono frame design(rebated)
Barum frame design(lining plus planted stop)
Solo Split Solo
Solo frame design
Solo Split SoloDe
sign
er R
an
ge
Split Solo frame design(rebated)
P. 21
Glazed screens
Door leaves from the Designer Range can be incorporated into glazed screens constructed using the Barum frame section in order to comply with fire certification up to 60 minutes. For either clear or wired glass, the maximum individual pane size that can be accommodated is 2420mm wide or 2420mm high, but not exceeding 2.15m2 area.
Screens are supplied ready for glazing by others on-site and the frame section is available in hardwood or softwood. They can be finished with our clear, satin finish, Hyalux Natural polishing system or Hyalux Tint to give a translucent colour accentuating the grain of the timber. Alternatively, they can be supplied primed ready for painting on-site. Both Hyalux Natural and Hyalux Tint will contain the Hygienilac® antimicrobial additive that is applied, as standard, to all veneer facing options.
Technical details on frames can be found in our Specifying with Doors and Doorsets brochure. Alternatively, contact our Technical Services Department on 01773 530500 for further details.
Mono frame design with extension lining
Barum frame design with extension lining
P. 22
performance intumescents and seals
Door performance table
NOTES
1. Further information on testing and performance can be found in the Specifying with Doors and Doorsets brochure.
2. Where doorsets with a higher level of performance are required, refer to our Extended Performance Range.
Characteristics EnduraCor EnduraCor 30 EnduraCor 60 Lamcor Lamcor 30 Lamcor 60
Thickness 44mm 44mm 55mm 44mm 44mm 54mm
Weight prior to final facing (kg/m2) 21 21 33 23 23 27
Performance EnduraCor EnduraCor 30 EnduraCor 60 Lamcor Lamcor 30 Lamcor 60
Internal location 3 3 3 3 3 3
External location to BS DD 171 3 3
Fire performance to BS 476 Part 22 Non-rated FD30 FD60 Non-rated FD30 FD60
Smoke control to BS 476 Part 31.1
(3m3 per lin m per hour @ 25 Pa) 3 3 3 3 3 3
Sound reduction to BS EN ISO 140-3 andBS EN ISO 717-1 (with appropriate acoustic seals) 28RwdB 28RwdB 32RwdB 29RwdB 29RwdB 29RwdB
Thermal insulation to BS EN ISO 6946 (W/m2K) 1.50 1.50 1.36 1.63 1.63 1.68
Mechanical strength to BS DD 171 Severe duty Severe duty Severe duty Severe duty Severe duty Severe duty
De
sign
er R
an
ge
P. 23
Intumescent and smoke seals
Perimeter fire seals are essential to performance and there are three types available: intumescent, intumescent and smoke seal combined, and concealed intumescent. The first two systems incorporate exposed intumescent strips to the frame jambs and head as a standard, whereas the concealed method houses the intumescent strips behind vertical door lippings but exposed on top. Generally, exposed intumescents are 10mm x 4mm for 30 minute performance and 20mm x 4mm for 60 minutes.
Where complete doorsets are being supplied, all necessary intumescent seals will be included to the frame as a standard, in order to achieve the stated performance. However, the specifier needs to indicate whether the concealed method is required. In the case of pairs of fire-rated doors, a combined intumescent and smoke seal will be incorporated at the meeting stile of the primary leaf corresponding with a plain intumescent in the secondary leaf.
Where doors only are being supplied, seals need to be specified precisely if required. If intumescents are to be fitted by others, they must comply with our fire certification requirements details of which can be found in the BWF-CERTIFIRE data sheets supplied with the doors.
Concealed intumescent seals can be incorporated into the vertical edges of single doors. With pairs of doors, the primary leaf will always feature an exposed combination seal at the meeting stile. The intumescent in the top edge must be exposed and is positioned to run the full width of the door leaf.
Use of a combined intumescent and smoke seal or a separate smoke seal will provide smoke protection in accordance with BS 476 Part 31.1. Approved Document B states that the bottom edge can be ignored, however certain sectors require this edge to be sealed. Contact Technical Services on 01773 530500 for further clarification.
For some time, the hinge edge of a door has been seen as a possible area of harm for children, with a potential for shearing and crushing of small, inquisitive fingers, as door closers fitted as part of the fire-safety requirements shut the door automatically.
According to the Royal Society for the Prevention of Accidents (ROSPA), 30,000 children trap and seriously injure their fingers in doors every year and more than 1500 of these children will need surgery. The cost of litigation for such incidents can also be substantial. Traditionally, these vulnerable areas have been protected by bulky and unsightly retro-fit products which are expensive and prone to damage and vandalism. Now, Leaderflush Shapland has developed an innovative new finger and hand protection system, Sentinel (patent pending), which offers both a discreet and aesthetically pleasing solution. Sentinel uses a pivoted design with decorative timber elements as an integral part of the doorset and is ideal for educational environments, nurseries, health centres, hospitals and commercial applications.
Opening beyond 90°
Opening beyond 90°
Plan view of Sentinel in action
Closed
Sentinel profile – patent pendingApplication number 0719 548.0
Open
P. 24
De
sign
er R
an
ge
Sentinelmaking hands safe
Sentinel is an innovative hand and finger protection solution that allows specifiers and architects to achieve outstanding performance, without compromising design or architectural integrity
Safe and sound
The Sentinel doorset is more than just an innovative way to guard against injuries to hands and fingers
Sentinel is also a high performance doorset offering up to 60 minute fire resistance, Approved Document M and BS8300 compliant opening forces and 30 RwdB acoustic performance.
P. 25
An integral part of the doorset
Seals and essential ironmongery are included, eliminating the risk of certification problems. This integral solution not only satisfies important performance requirements – compliant opening forces, fire resistance of up to 60 minutes and the acoustic requirements in schools of 30 RwdB but also adds an option for a unique, contemporary, modern design for timber doorsets. It also negates the need for on-site trades fitting retro-fit components. With all materials used in the manufacture either FSC accredited or FSC neutral, Sentinel is environmentally friendly as well as being one of the most effective and unobtrusive finger protection solutions in the marketplace.
Why specify Sentinel – Sentinel provides effective and unobtrusive finger protection whilst guaranteeing the highest levels of performance
Sentinel doorset performance characteristics
Performance
• Fire resistance – NR, FD30 and FD60
• Smoke control
• Acoustics – 30 RwdB as a single action, single leaf
• Mechanical performance – Severe Duty
• Opening forces – Approved Document M and BS8300 compliant with GEzE TS300ECBC closer
Configuration
• Single action, single leaf and single action, double leaf
Door construction
The Sentinel doorset uses the new Leaderflush Shapland engineered performance core – EnduraCor
Door finish
Sentinel doorsets can be faced in veneer, laminate or can be supplied primed. In each instance the profiled hanging edge is supplied factory finished in lacquered hardwood and should not be painted over.
Architectural Hardware
Sentinel doorsets are supplied complete with all essential ironmongery. This is absolutely essential in order to ensure that the performance characteristics – opening force, sound reduction, smoke control and fire resistance – are maintained. The ironmongery pack supplied will vary according to the performance and finish specified.
Supply of Sentinel doorsets to site
Sentinel doorsets are supplied with door leaf and frame separate. The door leaf which operates with use of a pivot system is quick and easy to fit on-site, once the frame is installed, enabling the door leaf to be removed simply for inspection.
Technical information
Sentinel doorsets have additional performance characteristics which makes this latest innovation from Leaderflush Shapland far more than a finger protection solution. The summary below outlines the technical characteristics that are achieved through specifying Sentinel doorsets.
P. 26
Barum frame design
De
sign
er R
an
ge
The following diagrams illustrate the differences between a traditional frame profile and the innovative Sentinel design from Leaderflush Shapland:
• Extended product life and reduced maintenance costs
• Ergonomic, smooth design has no dirt traps enabling easy cleaning and the lacquer contains Hygienilac® antimicrobial protection
• Traditional retro-fit finger guards often increase required opening force, whereas Sentinel complies with Approved Document M and BS8300.
As an integral part of the Sentinel doorset, the scalloped profile brings the following key advantages:
• Prevents the crushing and shearing of fingers (adults and children)
• An integral robust solution to reduce the potential for misuse or vandalism and ensure long-term reliability
• Fully complies with Building Regulations and can be incorporated into all BSF design applications
• Achieves 30 RwdB making it ideal for classroom entrance doorsets
• Cannot be forcibly removed, negating the cost of ongoing replacement
• Offers wide choice of design aesthetics to the specifier/designer
• Modern design and smooth line profile is ideal for design-led environments
• Provides creative freedom and flexibility for specifiers and designers
Fingers and small hands can be trapped in the hinge edge of doors with relative ease, as shown, sometimes causing painful and damaging injuries.
Sentinel prevents the trapping of fingers on both sides of the door leaf at the pivoted edge.
Opening beyond 90°
Opening beyond 90°
Opening beyond 90°
Opening beyond 90°
Sentinel frame in action
Typical frame designs
Sentinel profile – patent pending Application number 0719 548.0
P. 27
Sentinel doorset
410 INTERNAL SENTINEL HALF HOUR FIRE RESISTING 30 RwdB LAMINATE FACED DOORSETS:
Manufacturer and reference: Leaderflush Shapland, Milnhay Road, Langley Mill, Nottingham, NG16 4Az. Tel: 01773 530500.
Door leafCore: Severe duty, high-density
flaxboard and engineered softwood
Facings: Hard plastic laminate Lippings: Maple to all edges with
matching Sentinel profile
Glazing details Shape: VN4Bead type: Maple flushbead with radius
corners. Pin fixed.Glass: Clear FD30Finish as delivered: Hyalux clear lacquer to beads,
lippings and Sentinel profile
Frame and architravesReference and section: Barum 44 x 94mm (f) with
32 x 14mm (f) planted stop to head and lock jamb only
Timber species: MapleClass: J30
(To EN 942)Finish as delivered: Hyalux clear lacquer
IronmongeryPivot set: Sentinel pivot set standardLocks: Mortice lock with extended
strike plate to sashlock and latch from Leaderflush Shapland range, supplied and fixed
Door closer: GEzE TS3000EC BC slide arm closer with backcheck, GEzE caps stainless steel finish
Perimeter seals Acoustic seals: Lorient IS1206 to frame stops,
Lorient LP2004DS to hanging jamb and Lorient IS3036si surface mounted dropseal supplied loose
Intumescents: Fire seals to required detail
Specifications
The following is an example of a NBS-based specification clause. For asssitance with specifications please contact our Technical Services team on 01773 530500.
Barum frame design
Pivettedoorsets
reduced swing doorsets for accessibility
P. 28
Introducing Pivette
Doors are easy to operate manually, needing only light pressure to move aside and well out of the way. Complete, factory-finished, pre-hung doorsets are supplied as standard including frames, track and suspension systems, for straightforward installation and reliable operation. Pivette doorsets are available with finishes, colours and ironmongery to match other Leaderflush Shapland doorsets specified on a project.
Pivette doorsets are particularly suited to healthcare and other buildings where space is at a premium or accessibility important. Pivette offers cost-effective solutions to a wide range of design problems presented by Part M of the Building regulations, The Disability Discrimination Act and the newly updated BS 8300:2009. As stated within BS8300:2009, reduced swing doorsets reduce the extent to which the door swings into the room and corridor, facilitating movement in and out of rooms such as WCs and bathrooms.
the Pivette range is based on a unique design of two-leaf articulated door, developed to minimise door swing area whilst maximising clear opening width
De
sign
er R
an
ge
P. 29
Why choose Pivette
The sliding, folding mechanics of this doorset make it a versatile solution where functionality, access and space are important considerations:
• Uses only one third of a conventional door swing area
• Maximises opening area for optimum accessibility
• Straightforward to install and easy to operate
• Outward opening WC doors in houses, substantially reducing the corridor width
• Doors opening onto landings, leaving access space to comply with Part K
• Lobbies with space required for wheelchair access between doorways
• Sanitary accommodation doors opening outwards onto circulation space
• Emergency release option
Minimised door swing area maximising clear opening width
an ideal solution
optimising available space
Pivette doors can be matched visually to other doorsets on the same project
P. 30
Barum frame design
Emergency release Pivette
This doorset incorporates a retractable guide bolt that overrides the standard mode of action, allowing the door to open away from an obstruction. Emergency Release Pivette is ideal for WCs and other areas where access might otherwise prove difficult in an emergency, such as a fallen person obstructing the conventional opening arc. This system is available for outward opening doorsets.
reduced swing doorsets for accessibility
Pivette with emergency release operation
obstruction
Pivette standard operation
obstruction
Fire resistance
Pivette doorsets are available either non-rated or FD30 (30 minutes) in accordance with BS 476: Part 22: 1987 and are BWF-CERTIFIRE accredited. FD30 doorsets are supplied with a free-swing electromagnetic door closer which should be interfaced with the fire detection system. In day to day use the door remains easy to operate but, in the event of a fire or power failure, will automatically close. Intumescents are fitted to the frames of FD30 doorsets in the factory.
Pivette widths
The sizes shown below are offered as standard, with structural opening sizes of 1110mm and above meeting the requirements of Approved Document M and BS8300. Other non-standard widths can be accommodated where technically possible. The maximum door height available is 2040mm.
Structural opening *Effective clear width Non-rated FD30
1010† 725 3 3
1110 825 3 3
1210 925 3 7
1410 1125 3 7
*Assumes the use of a lever handle projecting 70mm from face of door.† Does not meet requirements of BS8300.
De
sign
er R
an
ge
P. 31
Barum frame design
Configurations and handings
The drawings below set out the terminology for Pivette doorset handings for use in specifications. Specific size ranges for Pivette doorsets can be found in the relevant BWF-CERTIFIRE data sheets.
Vision panels can be included within the main door leaf. Standard aperture sizes, which comply with BS 8300 and Part M of the Building Regulations, are shown below. However, other arrangements, detailed on page 18, can also be supplied. Either the flush timber or steel trim bead system can be used (projecting details cannot), factory glazed with either clear or wired glass. Specific glass types, glazing systems and details are selected by us to meet fire performance requirements.
Pivette options
• FD30
• Smoke control
• Emergency release
• Finger guard
• Automatic opening
Pivette L/H inward opening
Room
Corridor
Pivette L/H outward opening
Room
Corridor
Pivette R/H inward opening
Room
Corridor
Pivette R/H outward opening
Room
Corridor
750 x 200488 x 200
156
416
212
Aperture VN3
– cut-out dimension
ironmongerysolutions
P. 32
flush fitting ironmongery
Hinges
All Designer doorsets are supplied factory hung, generally on lift-off hinges.
Hinges are supplied bright zinc plate (BzP) as standard. Stainless steel, brass and colour coated to match are also available.
Plates
Protection plates may be surface mounted or recessed flush.
Locks/latches/flushbolts
Flush fitting ironmongery can be installed into the Designer Range with a selection available in our Fitted Locks and Flushbolt literature. Alternatively, doorsets can be prepared for specified ironmongery to be fitted on-site by the installer (except hinges).
architectural hardware
The Leaderflush Shapland name is synonymous with performance, design, quality, innovation and excellence. These same attributes can be found in the Leaderflush Shapland range of architectural hardware, where products have been chosen to meet specific performance requirements. As a result, when we supply your doors and doorsets we can provide a complete end-to-end solution, enabling you to specify all your door and doorset requirements from one provider. Our integrated package has a full range of complementary accessories – from the standard to the diverse – and our technical division (which includes members of the Guild of Architectural Ironmongers), ensures that we have an experienced team on-hand to provide a full specification support service.
For more information about our architectural hardware range visit www.leaderflushshapland.co.uk/architectural_hardware.php
architectural hardware – a total doorset solution
Leaderflush Shapland can provide a total architectural hardware solution completing a full doorset offer
De
sign
er R
an
ge
P. 33
installation
Ideally, Designer Range doorsets should be considered as late second fix items, not for installation until all ‘wet trades’ have finished.
Despite ISO 9000 procedural disciplines and the BWF-CERTIFIRE third party product auditing, doorsets could still fail to meet basic performance criteria through defective installation. We strongly recommend that all doorsets are fitted by an Installation Partner or a member of FIRAS. Where fire protection is required, it is essential that any voids between the back of the frame and the structural opening be protected in accordance with BS 8214.
For a list of our Installation Partners, please visit www.leaderflushshapland.co.uk/installationlist.php.
on-site Great care is taken to ensure that all Leaderflush Shapland products arrive on-site in perfect condition:
• Door leaves are shrink-wrapped with corner protection
• Single leaf doorsets are dispatched assembled complete with spacers to support the frame
• Doorsets incorporating paired leaves are separated prior to despatch for easy handling
• Delivery is in covered lorries
Knock-down frames
For ease of delivery, unloading and on-site handling, Leaderflush Shapland can supply certain frame types in knock-down format.
Each frame will be individually wrapped and labelled with assembly instructions included.
For more information please contact us on 01773 530300.
doorsetson-site
care of doorsets
Leaderflush Shapland recommend doorsets should be installed as a late second fix item
introducing our other ranges and brands
performance doorsets, meeting all performance criteria – across all sectors
P. 34
Through our brands, Leaderflush Shapland, Longden, Multisecure and Fitzpatrick, we offer the widest choice of performance doors and doorsets across all sectors encompassing commercial, health, education, social housing, heritage, conservation and consumer exclusive homes.
Leaderflush Shapland Ranges
The Ranges within Leaderflush Shapland suit a variety of different applications ranging from high level sound attenuation to standard fire resistance.
The Plasform® Range has been developed to meet the hygiene, safety and operational requirements of applications ranging from commercial, educational and transport to health, food and the ‘high tech’ industries. It is characterised by the use of radiused vertical edges to door leaves and all frame edges, with the post-forming of facings around them. This distinctive design is easy to clean, ergonomically friendly and damage resistant, and doors are fully encapsulated and maintenance free. Various vision panel options are available including flush-glazed systems.
The Extended Performance Range offers enhanced characteristics for flush doors in the areas of fire resistance
(up to FD 120) and acoustics (up to 49 RwdB), as well as specific security products with high levels of resistance to forced entry, vandalism and more serious burglary or armed attacks. Specially designed doorsets are also available for X-ray protection.
The Architectural Hardware Range
Leaderflush Shapland is also able to offer a complete architectural hardware solution enabling you to specify all your doorset and ironmongery requirements from one convenient source. A dedicated technical team has been set up to help specifiers and architects with all their ironmongery requirements.
Innovations from Leaderflush Shapland
• Sentinel• Hygienilac®
• Hygieniform• Intelliglass®
• EnduraCor• Envision
For more information please visit our website at www.leaderflushshapland.co.uk
an extensive portfolio of products that enables us to satisfy all your doorset needs
De
sign
er R
an
ge
P. 35
Multisecure specialises in the manufacture of entry doorsets, communal entrances and screens for social housing projects. Blockade doorsets for external or internal applications are ‘Secured by Design’ accredited and utilise composite timber construction. Fortcullis communal entrance doorsets and screens combine visibility and light with high security. Yobstopper doorsets offer very high levels of security for applications requiring an even more robust solution.
www.multisecure.co.uk
Fitzpatrick offer a full bespoke design service for the manufacture of quality metal doorsets and frames. Fitzpatrick product range incorporates fire rated, acoustic and security products in both steel and stainless steel.
www.fitzpatrickmetaldoors.co.uk
The Longden bespoke range of panelled doors and doorsets uses solid timber traditional construction methods combined with innovative techniques unique to the range to meet modern performance standards. Both raised and fielded panel and flat panel designs are available whilst boarded doors or glazed doors and screens can also be accommodated. Other products such as panelling for soffits and reveals or skirtings and dados can be manufactured. Longden has unrivalled experience in conservation and restoration, as well as manufacturing for new projects in either traditional and contemporary styles. Longden solid timber doorsets offer the ultimate in quality for luxury homes.
www.longdendoors.co.uk
ww
w.le
ad
erfl
ush
sha
pla
nd
.co
.uk
Leaderflush+Shapland Ltd reserve the right to change any product specification, design or description without prior notice.No responsibility or liability can be accepted for any loss or damage arising from any error or omission contained in this brochure.
The future of performance doorsets
Head Office t 01773 530500Milnhay Road f 01773 530040Langley Mill e [email protected] w www.leaderflushshapland.co.ukNG16 4Az Leaderflush+Shapland Ltd. Registered in England No. 1223374
9001 14001 18001
A member of plc
Mixed SourcesProduct group from well-managedforests and other controlled sourceswww.fsc.org Cert no. SGS-COC-004345© 1996 Forest Stewardship Council