deutsche akkreditierungsstelle gmbh€¦ · din en 1254-3 1998-03 copper and copper alloys -...
TRANSCRIPT
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
1/8
Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D-IS-13119-01-00
according to DIN EN ISO/IEC 17020:2012
Period of validity: 18.09.2017 to 07.11.2018 Date of issue: 01.12.2017
Holder of certificate:
IMA Materialforschung und Anwendungstechnik GmbH
Wilhelmine-Reichard-Ring 4, 01109 Dresden
for its inspection body Type A
at the location:
Wilhelmine-Reichard-Ring 4, 01109 Dresden (BI 1)
Am Lagerplatz 4, 01099 Dresden (BI 2)
Inspections in the fields:
Inspection of products, product groups and structural elements in the product fields vessels,
profiles as well as pipes, pipe form elements, armatures and pipe systems from plastics, fibre
plastics composites, plastics metal composites, metal and inspection of factory production
control of products (vessels, profiles, pipes, pipe form elements, armatures and pipe systems
from plastics, fibre plastics composite, plastics metal composites), metal, metallic product
groups and structural elements in accordance with specifications and determination of their
conformity with specific requirements and on the basis of professional judgment, general
requirements
Abbreviations used: see last page
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 2/8
Date of issue: 01.12.2017
Inspections according to inspection procedure
QBI/1
2016-11
Work instruction of IMA Inspection body – Standard operating
procedure Inspections for examining products, factory production
inspections as well as sampling at production location
Inspections in the following fields are done in accordance with the specifications defined by the
respective certification schemes, evaluation and basic normative documents
1. Plastics structural elements (BI 1)
DIBt Building code of
German states
PÜZ List part IIa
Serial no. 41.1/2
Vessels, containers and retaining devices as well as collecting pits
without outlets made from thermosetting plastics; reaction resin,
textiles reinforced materials 1
DIBt Building code of
German states
PÜZ List part IIa
Serial no. 41.2/1
Coatings for container walls and deflection surfaces 1
DIBt Building code of
German states
PÜZ List part IIa
Serial no. 6.1/1, 6.1/3,
6.1/4
Structural elements made of composite materials and glass fibre
reinforced plastics1; structural elements made of thermoplastics1;
reaction resin composite construction materials1
DIBt Building code of
German states
PÜZ List part IIa
Serial no. 1.5/5
Textile reinforcements
DIN EN 13245-2
2010-11
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building
applications - Part 2: PVC-U profiles and PVC-UE profiles for internal
and external wall and ceiling finishes
DIN EN 14509
2013-12
Self-supporting double skin metal faced insulating panels – Factory
made products – Specifications
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 3/8
Date of issue: 01.12.2017
Quality regulations for
sandwich elements and
profiles EPAQ, 2016-11
Quality regulations of European Association for Panels and Profiles
(PPA-Europe) for sandwich elements and cold formed profiles
DIN EN 14782
2006-03
Self-supporting metal sheet for roofing, external cladding and internal
lining - Product specification and requirements
EAD 260001-00-03.03
2016-04
Structural sections and decks made from fibre reinforced polymers
(FRP/glass fibre composites); EOTA file No. 13-26-0001-03.03
2. Pipes systems (BI 2)
DIN 8076
2013-09
Pressure pipelines made from thermoplastics materials – Metal
and plastics compression fittings for polyethylene (PE) pipes
DIN EN 253
2015-12
District heating pipes – Preinsulated bonded pipe systems for
directly buried hot water networks – Pipe assembly of steel
service pipe, polyurethane thermal insulation and outer casing of
polyethylene
DIN EN 448
2016-02
District heating pipes - Preinsulated bonded pipe systems for
directly buried hot water networks - Fitting assemblies of steel
service pipes, polyurethane thermal insulation and outer casing of
polyethylene
DIN EN 489
2009-07
District heating pipes - Preinsulated bonded pipe systems for
directly buried hot water networks - Joint assembly for steel
service pipes, polyurethane thermal insulation and outer casing of
polyethylene
DIN EN 1254-3
1998-03
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with
compression ends for use with plastics pipes
DIN EN 1254-8
2012-08
Copper and copper alloys - Plumbing fittings - Part 8: Fittings with
press ends for use with plastics and multilayer pipes;
DIN CEN/TS 12201-5
2014-05
Plastics piping systems for water supply, and for drainage and
sewerage under pressure – Polyethylene (PE) – Part 5: Fitness for
purpose of the system;
DIN CEN/TS 1555-5
2014-04
Plastics piping systems for the supply of gaseous fuels -
Polyethylene (PE) – Part 5: Fitness for purpose of the system;
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 4/8
Date of issue: 01.12.2017
DIN ISO/TS 15874-7
2004-03
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) - Part 7: Guidance for the assessment of
conformity
DIN CEN/TS 14632:2012-05;
DIN SPEC 19939:2012-05
Plastics piping systems for drainage, sewerage and water supply,
pressure and non-pressure – Glass-reinforced thermosetting
plastics (GRP) based on unsaturated polyester resin (UP) -
Guidance for the assessment of conformity;;
DIN ISO/TS 15875-7
2004-03
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PEX) .Part 7: Guidance for the
assessment of conformity
DIN ISO/TS 15876-7
2004-03
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) - Part 7: Guidance for the
assessment of conformity
DIN ISO/TS 15877-7
2010-02
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) -Part 7: Guidance for the
assessment of conformity
DIN CEN IS0/TS 22391-7
03-2012-03
Plastics piping systems for hot and cold water installations –
Polyethylene of raised temperature resistance (PE-RT) – Part 7:
Guidance for the assessment of conformity
DIN CEN ISO/TS 21003-7
2010-12
Multilayer piping systems for hot and cold water installations
inside buildings – Part 7: Guidance for the assessment of
conformity
DVGW CERT
40014-11-N-DE
01/2017
Rules of procedure for the certification of products in non-
harmonised field
DVGW W 534
2015-07
Pipe connectors and pipe joints in drinking water installation
DVGW W 540
2010-08
Intrinsically safe apparatus for connection to the drinking water
installation
DVGW W 542
2009-08
Multiple layer piping systems in drinking water installation
DVGW W 543
2005-05
Pipe connectors and connections in drinking installation
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 5/8
Date of issue: 01.12.2017
DVGW W 544
2007-05
Plastic pipes in drinking water installations
DVGW W 570-1
2013-03
Fittings for drinking water installation - Part 1: Requirements and
tests for building fittings
DVGW W 570-2
2008-01
Fittings for drinking water installation - Part 2: Requirements and
tests for safety valves
DVGW W 570-3
2013-12
Fittings in the drinking water installation - building and safety
fittings and / or combinations in special designs for applications
according to DIN EN 806 and DIN EN 1717 in conjunction with DIN
1988
DVGW W 579
2015-09
Sampling Valves in Drinking Water Installations - Requirements
and Tests
DVGW GW 335-A1
2003-06
Plastic pipeline systems in gas and water distribution ‐
requirements and testing ‐ part A1: PVC ‐ U pipes and fittings /
components for water distribution
DVGW GW 335-A2
2005-11
Plastic pipeline systems in gas and water distribution ‐
requirements and testing ‐ Part A2: PE 80 and PE 100
DVGW GW 335-B2
2004-09
Plastic pipeline systems in gas and water distribution ‐
requirements and testing ‐ part B2: PE 80 and PE 100 fittings
DVGW GW 335-B3
2011-09
Plastic pipeline systems in gas and water distribution ‐
requirements and testing ‐ part B3: mechanical connectors made
from plastics (POM, PP) for water distribution
DVGW GW 335-B4
2014-04
Plastic pipeline systems in gas and water distribution ‐ part B4:
fittings with metallic covering with mechanical or spigot and
socket connectors for water distribution
DVGW G 5614
2013-12
Permanent pipe joints for metal gas lines ‐ press connectors
DVGW G 5600-1
2014-02
Metallic material intersection connector for polyethylene gas
pipes ‐ Requirements and testing Section
DVGW W 574
2007-04
Sanitary valves as extraction fittings for drinking water
installation– Requirements and tests
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 6/8
Date of issue: 01.12.2017
DVGW VP 615
1996-07
Pressure pipes, fittings and pipe connections from glass fibre
reinforced polyester resin (UP‐GF) for potable water pipelines
DVGW VP 640
2003-08-
Plastic pipeline systems in gas and water distribution ‐
requirements and testing ‐ PE‐Xb and PE‐Xc pipes
DIN Certco Certification
program (ZP) 2015-01
Plastic pipes and systems for warm water surface heating and
heating element connections
DIN Certco Certification
program (ZP) 2015-03
Plastic pipe system (pressure pipes and fittings)
DIN Certco Certification
program (ZP) 2015-03
Plastic pipe system (sewers and waste water pipes )
DB Standard DBS 918 064
2008-12-
Plastic pipes and fittings for drainage in train facilities
SKZ-HR 3.2
2015-04
Heating pipes made of crosslinked polyethylene PE-X
SKZ-HR 3.3
2015-04
Heating pipes made of polyethylene
SKZ-HR 3.12
2015-06
Heating pipes made of HDPE/AL/HDPE-multilayer pipe
SKZ-HR 3.13
2006-05
Heating pipes made of crosslinked polyethylene of medium
density PE-MDX
SKZ-HR 3.16
2015-04
Heating pipes made of polyethylene with raised temperature
resistance
SKZ-HR 3.26
2015-02
Geothermal Probes, Pipes and Fittings made of Polyethylene, PE
100, for Geothermal Products
INSTA-CERT
2012-02
General Rules for the services provided by INSTA-CERT Product
certification (GRC)
February 2012
INSTA SBC ISO 21003
2015-01
Specific rules for Nordic certification in accordance with ISO 21003
Multilayer piping systems for hot and cold water
installations inside buildings
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 7/8
Date of issue: 01.12.2017
SVGW ZW 101
2016-01
General terms and conditions of SVGW Certification body Water,
SVGW ZertW
SVGW GW/TPG-TPW 101 d
2004-10
Regulations for the SVGW approval of pipes and piping system
parts of plastic for use in the gas and drinking water areas
SVGW ZW 106
2016-07
Waste fitting and Angled isolating valve
SVGW ZW 110
2016-01
Isolation valves
SVGW ZW 125
2016-01
Drinking water distribution systems with pipes made of PE-X
SVGW ZW 129
2016-01
Drinking water distribution systems with pipes made of PB
SVGW ZW 142
2016-01
Drinking water distribution systems with multilayer composite
pipes
KIWA BRL-K536 part D
15-12-2011
Evaluation guideline for the Kiwa (technical approval with)
product certificate for plastic piping systems of PE-X intended for
transport of hot and cold drinking water
KIWA BRL-K536 part E
15-12-2011
Evaluation guideline for the Kiwa (technical approval with-)
product certificate for plastic piping systems of PE-X /Al intended
for transport of hot and cold drinking water
KIWA BRL-K536 part G
15-12-2011
Evaluation guideline for the Kiwa (technical approval with-)
product certificate for plastic piping systems of PE-RT /Al intended
for transport of hot and cold drinking water
KIWA BRL-K774/06
01-02-2012
Evaluation guideline for the Kiwa product certificate for Compression
fittings to tighten with matching clamping device
KIWA GASTEC QA KE 186
November 2012
Approval Requirements 186 for the GASTEC QA product certificate
for press fittings for joining copper pipes
Executive order No. 666
of 20 May 2015
Danish Ministry of Transport and Building (Issue of approvals for
building components that come into contact with drinking water)
GDV/ Version 2.0 of 22 May
2015
Inspection guidelines for building components approved for
drinking water
Annex to the accreditation certificate D-IS-13119-01-00
Period of validity: 18.09.2017 to 07.11.2018 - Translation - 8/8
Date of issue: 01.12.2017
Abbreviations used:
BRL Beurteilungsrichtlinie (Specification for evaluation)
DBS Deutsche Bahn Standard
DIBt Deutsches Institut für Bautechnik
Competence Centre for Construction
DIN German Institute of Standardisation
DIN Certco DIN CERTCO certification body for conformity assessment
DVGW Deutsche Vereinigung des Gas- und Wasserfaches e.V.
German Association of Gas and Waterworks
EN European Standard
GASTEC QA Recognition specifications from KIWA
GW/TPG-TPW SVGW Prüf- / Zertifizierungsreglement
GDV Godkent til Drikkevand (Denmark) – Danish GDV scheme fee funded
approval scheme for building components in contact with drinking water
HR Testing and inspection requirements of SKZ
INSTA SBC Specific rules for Nordic certification
ISO International Organisation for Standardisation
KIWA Formerly: Keurings instituut voor waterleiding Artikelen (Dutch Test
Institute for drinking water articles) (Today: proper name)
QBI Quality management procedure of IMA-Dresden
SKZ Süddeutsches Kunststoffzentrum - South German Plastics Centre
SVGW Swiss Association of Gas and Waterworks
Z Building code approval of DIBT Competence Centre for Construction
ZP Certification programme of DIN-Certco